Tech-invite3GPPspaceIETFspace
21222324252627282931323334353637384‑5x

Content for  TS 38.413  Word version:  18.2.0

Top   Top   Up   Prev   Next
1…   4…   8…   8.2…   8.2.3…   8.3…   8.3.4…   8.4…   8.4.3…   8.5…   8.7…   8.8…   8.10…   8.12…   8.17…   9…   9.2…   9.2.2…   9.2.3…   9.2.4…   9.2.6…   9.2.7…   9.2.9…   9.2.11…   9.2.16…   9.2.17…   9.3…   9.3.1.21…   9.3.1.41…   9.3.1.61…   9.3.1.81…   9.3.1.101…   9.3.1.121…   9.3.1.141…   9.3.1.161…   9.3.1.181…   9.3.1.205…   9.3.1.222…   9.3.1.245…   9.3.2…   9.3.3…   9.3.3.21…   9.3.3.42…   9.3.4…   9.3.4.10…   9.3.5…   9.4…   9.4.4   9.4.5   9.4.6…   9.5…   10…

 

9.3.1.61  Index to RAT/Frequency Selection Priorityp. 240

This IE is used to define local configuration for RRM strategies such as camp priorities in Idle mode and control of inter-RAT/inter-frequency handover in Active mode (see TS 23.501).
IE/Group Name Pre­sence Range IE type and reference Semantics description
Index to RAT/Frequency Selection PriorityMINTEGER (1..256, …)
Up

9.3.1.62  Data Forwarding Acceptedp. 240

This IE indicates that the NG-RAN node accepts the proposed DL data forwarding for the QoS flow which is subject to data forwarding.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Data Forwarding AcceptedMENUMERATED (data forwarding accepted, …)
Up

9.3.1.63  Data Forwarding Not Possiblep. 240

This IE indicates that the 5GC decided that the corresponding PDU session will not be subject to data forwarding.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Data Forwarding Not PossibleMENUMERATED (data forwarding not possible, …)
Up

9.3.1.64  Direct Forwarding Path Availabilityp. 241

This IE indicates whether a direct forwarding path is available.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Direct Forwarding Path AvailabilityMENUMERATED (direct path available, …)
Up

9.3.1.65  Location Reporting Request Typep. 241

This IE indicates the type of location request to be handled by the NG-RAN node.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
Event TypeMENUMERATED (direct, change of serving cell, UE presence in the area of interest, stop change of serving cell, stop UE presence in the area of interest, cancel location reporting for the UE, … change of serving cell and UE presence in the area of interest)-
Report AreaMENUMERATED (cell, …)-
Area of Interest List0..1-
>Area of Interest Item1..<maxnoofAoI>-
>>Area of InterestM 9.3.1.66-
>>Location Reporting Reference IDM 9.3.1.76-
Location Reporting Reference ID to be CancelledC- ifEventTypeisfStopUEPresfinAoILocation Reporting Reference ID
9.3.1.76
-
Additional Location InformationOENUMERATED (Include PSCell, ...)YESignore
Additional Cancelled Location Reporting Reference ID List0..1YESreject
>Additional Cancelled Location Reporting Reference ID Item1..<maxnoofAoIMinusOne>-
>>Location Reporting Reference ID to be CancelledMLocation Reporting Reference ID
9.3.1.76
-
Range bound Explanation
maxnoofAoIMaximum no. of areas of interest. Value is 64.
maxnoofAoIMinusOneMaximum no. of areas of interest minus one. Value is 63.
Condition Explanation
ifEventTypeisfStopUEPresinAoI This IE shall be present if the Event Type IE is set to the value "stop UE presence in the area of interest".
Up

9.3.1.66  Area of Interestp. 243

This IE indicates the area of interest.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Area of Interest TAI List0..1
>Area of Interest TAI Item1..<maxnoofTAIinAoI>
>>TAIM 9.3.3.11
Area of Interest Cell List0..1
>Area of Interest Cell Item1..<maxnoofCellinAoI>
>>NG-RAN CGIM 9.3.1.73
Area of Interest RAN Node List0..1
>Area of Interest RAN Node Item1..<maxnoofRANNodeinAoI>
>>Global RAN Node IDM 9.3.1.5
Range bound Explanation
maxnoofTAIinAoIMaximum no. of tracking areas in an area of interest. Value is 16.
maxnoofCellinAoIMaximum no. of cells in an area of interest. Value is 256.
maxnoofRANNodeinAoIMaximum no. of NG-RAN nodes in an area of interest. Value is 64.
Up

9.3.1.67  UE Presence in Area of Interest Listp. 243

This IE indicates the UE presence in the area of interest.
IE/Group Name Pre­sence Range IE type and reference Semantics description
UE Presence in Area of Interest Item1..<maxnoofAoI>
>Location Reporting Reference IDM 9.3.1.76
>UE PresenceMENUMERATED (in, out, unknown, …)
Range bound Explanation
maxnoofAoIMaximum no. of areas of interest. Value is 64.
Up

9.3.1.68  UE Radio Capability for Pagingp. 243

This IE contains paging specific UE Radio Capability information.
IE/Group Name Pre­sence Range IE type and reference Semantics description
UE Radio Capability for Paging of NROOCTET STRINGIncludes the UERadioPagingInformation message as defined in TS 38.331.
UE Radio Capability for Paging of E-UTRAOOCTET STRINGIncludes the UERadioPagingInformation message as defined in TS 36.331.
UE Radio Capability for Paging of NB-IoTOOCTET STRINGIncludes the UERadioPagingInformation-NB message as defined in TS 36.331.
Up

9.3.1.69  Assistance Data for Pagingp. 244

This IE provides assistance information for paging optimisation.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
Assistance Data for Recommended CellsO 9.3.1.70-
Paging Attempt Information O 9.3.1.72-
NPN Paging Assistance InformationO 9.3.1.183YESignore
Paging Assistance Data for CE Capable UEO 9.3.1.141YESignore
Up

9.3.1.70  Assistance Data for Recommended Cellsp. 244

This IE provides assistance information for paging in recommended cells.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Recommended Cells for PagingM 9.3.1.71
Up

9.3.1.71  Recommended Cells for Pagingp. 244

This IE contains the recommended cells for paging.
This IE is transparent to the 5GC.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Recommended Cell List1
>Recommended Cell Item1..<maxnoofRecommendedCells>Includes visited and non-visited cells, where visited cells are listed in the order the UE visited them with the most recent cell being the first in the list. Non-visited cells are included immediately after the visited cell they are associated with.
>>NG-RAN CGIM 9.3.1.73
>>Time Stayed in Cell OINTEGER (0..4095)This is included for visited cells and indicates the time a UE stayed in a cell in seconds. If the UE stays in a cell more than 4095 seconds, this IE is set to 4095.
Range bound Explanation
maxnoofRecommendedCellsMaximum no. of recommended Cells. Value is 16.
Up

9.3.1.72  Paging Attempt Informationp. 244

This IE includes information related to the paging count over NG.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Paging Attempt CountMINTEGER (1..16, ...)Paging attempt count (see TS 38.300).
Intended Number of Paging AttemptsMINTEGER (1..16, …)Intended number of paging attempts (see TS 38.300).
Next Paging Area ScopeO ENUMERATED (same, changed, …) Indicates whether the paging area scope will change or not at next paging attempt. Usage specified in TS 38.300.
Up

9.3.1.73  NG-RAN CGIp. 245

This IE is used to globally identify a cell in NG-RAN.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE NG-RAN CGIM
>NR
>>NR CGIM 9.3.1.7
>E-UTRA
>>E-UTRA CGIM 9.3.1.9
Up

9.3.1.74  UE Radio Capabilityp. 245

This IE contains UE Radio Capability information.
IE/Group Name Pre­sence Range IE type and reference Semantics description
UE Radio CapabilityMOCTET STRINGIncludes either the UERadioAccessCapabilityInformation message as defined in TS 38.331, or the UERadioAccessCapabilityInformation-NB message as defined in TS 36.331.
Up

9.3.1.74a  UE Radio Capability - E-UTRA Format |R16|p. 245

This IE contains UE Radio Capability information to support Mode of operation A as specified in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
UE Radio Capability - E-UTRA FormatMOCTET STRINGIncludes the UERadioAccessCapabilityInformation message as defined in TS 36.331.
Up

9.3.1.75  Time Stampp. 245

This IE contains UTC time information.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Time StampMOCTET STRING (SIZE(4)) Encoded in the same format as the first four octets of the 64-bit timestamp format as defined in Section 6 of RFC 5905.
Up

9.3.1.76  Location Reporting Reference IDp. 246

This IE contains the Location Reporting Reference ID.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Location Reporting Reference IDMINTEGER (1..64, …)
Up

9.3.1.77  Data Forwarding Response DRB Listp. 246

This IE indicates data forwarding related information.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Data Forwarding Response DRB Item1..<maxnoofDRBs>
>DRB IDM 9.3.1.53
>DL Forwarding UP TNL InformationOUP Transport Layer Information
9.3.2.2
>UL Forwarding UP TNL InformationOUP Transport Layer Information
9.3.2.2
Range bound Explanation
maxnoofDRBsMaximum no. of DRBs allowed towards one UE. Value is 32.
Up

9.3.1.78  Paging Priorityp. 246

This element indicates the paging priority for paging a UE.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Paging PriorityMENUMERATED (PrioLevel1, PrioLevel2, PrioLevel3, PrioLevel4, PrioLevel5, PrioLevel6, PrioLevel7, PrioLevel8, …)Lower value codepoint indicates higher priority.
Up

9.3.1.79  Packet Loss Ratep. 246

This IE indicates the Packet Loss Rate for a QoS flow.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Packet Loss RateMINTEGER (0..1000, …)Ratio of lost packets per number of packets sent, expressed in tenth of percent.
Up

9.3.1.80  Packet Delay Budgetp. 246

This IE indicates the Packet Delay Budget for a QoS flow.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Packet Delay BudgetMINTEGER (0..1023, …)Upper bound value for the delay that a packet may experience expressed in unit of 0.5ms.
Up

Up   Top   ToC