Tech-invite3GPPspaceIETFspace
21222324252627282931323334353637384‑5x

Content for  TS 38.413  Word version:  18.0.0

Top   Top   Up   Prev   Next
1…   4…   8…   8.2…   8.2.3…   8.3…   8.3.4…   8.4…   8.4.3…   8.5…   8.7…   8.8…   8.10…   8.12…   8.17…   9…   9.2…   9.2.2…   9.2.3…   9.2.4…   9.2.6…   9.2.7…   9.2.9…   9.2.11…   9.2.16…   9.2.17…   9.3…   9.3.1.21…   9.3.1.41…   9.3.1.61…   9.3.1.81…   9.3.1.101…   9.3.1.121…   9.3.1.141…   9.3.1.161…   9.3.1.181…   9.3.1.205…   9.3.1.222…   9.3.1.245…   9.3.2…   9.3.3…   9.3.3.21…   9.3.3.42…   9.3.4…   9.3.4.10…   9.3.5…   9.4…   9.4.4   9.4.5   9.4.6…   9.5…   10…

 

9.3.1.161  Global TNGF ID |R16|p. 270

This IE is used to globally identify a TNGF.
IE/Group Name Pre­sence Range IE type and reference Semantics description
PLMN IdentityM 9.3.3.5
CHOICE TNGF IDM
>TNGF ID
>>TNGF IDMBIT STRING (SIZE(32, …))
Up

9.3.1.162  Global W-AGF ID |R16|p. 270

This IE is used to globally identify a W-AGF.
IE/Group Name Pre­sence Range IE type and reference Semantics description
PLMN IdentityM 9.3.3.5
CHOICE W-AGF IDM
>W-AGF ID
>>W-AGF IDM BIT STRING (SIZE(16, …))
Up

9.3.1.163  Global TWIF ID |R16|p. 270

This IE is used to globally identify a TWIF.
IE/Group Name Pre­sence Range IE type and reference Semantics description
PLMN IdentityM 9.3.3.5
CHOICE TWIF IDM
>TWIF ID
>>TWIF IDM BIT STRING (SIZE(32, …))
Up

9.3.1.164  W-AGF User Location Information |R16|p. 271

This IE indicates the location information via wireline access as specified in TS 23.316.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
CHOICE W-AGF User Location InformationM-
>Global Line ID-
>>Global Line IDMOCTET STRINGEncoded as defined in TS 23.003.-
>>Line TypeOENUMERATED (DSL, PON, …)-
>>TAIO 9.3.3.11YESignore
>HFC Node ID-
>>HFC Node IDMOCTET STRINGIndicates the identifier of the HFC node as specified in [37]. Encoded as defined in TS 23.003.-
>Global Cable IDYESignore
>>Global Cable IDMOCTET STRINGEncoded as defined in TS 23.003.-
>HFC Node ID NewYESignore
>>HFC Node IDMOCTET STRINGIndicates the identifier of the HFC node as specified in [37]. Encoded as defined in TS 23.003.-
>>TAIM 9.3.3.11-
>>Global Cable IDOOCTET STRINGEncoded as defined in TS 23.003.YESignore
>Global Cable ID NewYESignore
>>Global Cable IDMOCTET STRINGEncoded as defined in TS 23.003.-
>>TAIM 9.3.3.11-
Up

9.3.1.165  Global eNB ID |R16|p. 272

This IE is used to globally identify an eNB (see TS 36.401).
IE/Group Name Pre­sence Range IE type and reference Semantics description
PLMN IdentityM 9.3.3.5
CHOICE eNB IDM
>Macro eNB ID
>>Macro eNB IDMBIT STRING (SIZE(20))Equal to the 20 leftmost bits of the E-UTRA Cell Identity IE contained in the E-UTRA CGI IE of each cell served by the eNB.
>Home eNB ID
>>Home eNB IDMBIT STRING (SIZE(28))Equal to the E-UTRA Cell Identity IE contained in the E-UTRA CGI IE of the cell served by the eNB.
>Short Macro eNB ID
>>Short Macro eNB IDMBIT STRING (SIZE(18))Equal to the 18 leftmost bits of the E-UTRA Cell Identity IE contained in the E-UTRA CGI IE of each cell served by the eNB.
>Long Macro eNB ID
>>Long Macro eNB IDMBIT STRING (SIZE(21))Equal to the 21 leftmost bits of the E-UTRA Cell Identity IE contained in the E-UTRA CGI IE of each cell served by the eNB
Up

9.3.1.166  UE History Information from UE |R16|p. 272

This IE contains information about mobility history report for a UE.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE UE History Information from UEM
>NR
>>NR Mobility History ReportMOCTET STRINGIncludes the mobilityHistoryReport contained in the UEInformationResponse message as defined in TS 38.331.
Up

9.3.1.167  MDT Configuration |R16|p. 272

This IE defines the MDT configuration parameters.
IE/Group Name Pre­sence Range IE type and reference Semantics description
MDT Configuration-NRO 9.3.1.169
MDT Configuration-EUTRAO 9.3.1.170
Up

9.3.1.168  MDT PLMN List |R16|p. 272

The purpose of the MDT PLMN List IE is to provide the list of PLMN allowed for MDT.
IE/Group Name Pre­sence Range IE type and reference Semantics description
MDT PLMN List1..<maxnoofMDTPLMNs>
>PLMN IdentityM 9.3.3.5
Range bound Explanation
maxnoofMDTPLMNsMaximum no. of PLMNs in the MDT PLMN list. Value is 16.
Up

9.3.1.169  MDT Configuration-NR |R16|p. 273

This IE defines the MDT configuration parameters of NR.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
MDT ActivationMENUMERATED (Immediate MDT only, Logged MDT only, Immediate MDT and Trace, …)-
CHOICE Area Scope of MDTM-
>Cell basedIf PNI-NPN Area Scope of MDT IE is present, this IE covers non-CAG cells only, where non-CAG cells refer to cells that only provide public access.
>>Cell ID List for MDT1..<maxnoofCellIDforMDT>
>>>NR CGIM 9.3.1.7-
>TA basedIf PNI-NPN Area Scope of MDT IE is present, this IE covers non-CAG cells only, where non-CAG cells refer to cells that only provide public access.
>>>TACM 9.3.3.10The TAI is derived using the current serving PLMN.-
>PLMN wideNULL
>TAI basedIf PNI-NPN Area Scope of MDT IE is present, this IE covers non-CAG cells only, where non-CAG cells refer to cells that only provide public access.
>>TAI List for MDT1..<maxnoofTAforMDT>
>>>TAIM-
>PNI-NPN Based MDTYESignore
>>CAG List for MDT1..<maxnoofCAGforMDT>-
>>>PLMN ID 9.3.3.5-
>>>CAG IDM 9.3.3.43-
>SNPN Cell Based MDTYESignore
>>SNPN Cell ID List for MDT1..<maxnoofCellIDforMDT>-
>>>NR CGIM 9.3.1.7--
>>>NIDM 9.3.3.42Identifies an SNPN together with the PLMN Identity in the NR CGI IE.--
>SNPN TAI Based MDTYESignore
>>SNPN TAI List1..<maxnoofTAforMDT>--
>>>TAIM 9.3.3.11--
>>>NIDM 9.3.3.42Identifies an SNPN together with the PLMN Identity in the TAI IE.--
>SNPN Based MDTYESignore
>>MDT SNPN List1..<maxnoofMDTSNPNs>-
>>>PLMN IdentityM 9.3.3.5-
>>>NIDM 9.3.3.42Identifies an SNPN together with the PLMN Identity IE.-
CHOICE MDT ModeM-
>Immediate MDT
>>Measurements to Activate MBITSTRING
(SIZE(8))
Each position in the bitmap indicates a MDT measurement, as defined in TS 37.320.
First Bit = M1,
Second Bit= M2,
Third Bit = M4,
Fourth Bit = M5,
Fifth Bit = M6,
Sixth Bit = M7,
Seventh Bit = logging of M1 from event triggered measurement reports according to existing RRM configuration,
other bits reserved for future use.
Value "1" indicates "activate" and value "0" indicates "do not activate".
-
>>M1 ConfigurationC-ifM1 19.3.1.171-
>>M4 ConfigurationC-ifM4 9.3.1.172-
>>M5 ConfigurationC-ifM5 9.3.1.173-
>>M6 ConfigurationC-ifM6 9.3.1.174-
>>M7 ConfigurationC-ifM7 9.3.1.175-
>>Bluetooth Measurement ConfigurationO 9.3.1.177-
>>WLAN Measurement ConfigurationO 9.3.1.178-
>>MDT Location InformationO 9.3.1.176-
>>Sensor Measurement ConfigurationO 9.3.1.179-
>Logged MDT
>>Logging IntervalMENUMERATED (320ms, 640ms, 1280ms, 2560ms, 5120ms, 10240ms, 20480ms, 30720ms, 40960ms, 61440ms, infinity, …)Corresponds to the LoggingInterval IE as defined in TS 38.331. -
>>Logging DurationMENUMERATED (10, 20, 40, 60, 90,120, …)Corresponds to the LoggingDuration IE as defined in TS 38.331. Unit: [minute].-
>>CHOICE Report TypeM-
>>>PeriodicalNULL
>>>Event Triggered
>>>>Event Trigger Logged MDT ConfigurationM 9.3.1.180-
>>Bluetooth Measurement ConfigurationO 9.3.1.177-
>>WLAN Measurement ConfigurationO 9.3.1.178-
>>Sensor Measurement ConfigurationO 9.3.1.179-
>>Area Scope of Neighbour CellsO 9.3.1.182-
>>Early MeasurementOENUMERATED (true, ...)This IE indicates whether the UE is allowed to log measurements on early measurement related frequencies in logged MDT as specified in TS 38.331.YESignore
Signalling Based MDT PLMN ListOMDT PLMN List
9.3.1.168
-
PNI-NPN Area Scope of MDTO 9.3.3.65This IE is ignored if the PLMN Wide IE is presentYESignore
Range bound Explanation
maxnoofCellIDforMDTMaximum no. of Cell ID subject for MDT scope. Value is 32.
maxnoofTAforMDTMaximum no. of TA subject for MDT scope. Value is 8.
maxnoofCAGforMDTMaximum no. of CAG IDs for MDT scope. Value is 256.
maxnoofMDTSNPNsMaximum no. of SNPNs in the MDT SNPN list. Value is 16.
Condition Explanation
C-ifM1This IE shall be present if the Measurements to Activate IE has the first bit set to "1".
C-ifM4This IE shall be present if the Measurements to Activate IE has the third bit set to "1".
C-ifM5This IE shall be present if the Measurements to Activate IE has the fourth bit set to "1".
C-ifM6This IE shall be present if the Measurements to Activate IE has the fitth bit set to "1".
C-ifM7This IE shall be present if the Measurements to Activate IE has the sixth bit set to "1".
Up

9.3.1.170  MDT Configuration-EUTRA |R16|p. 277

This IE defines the MDT configuration parameters of EUTRA.
IE/Group Name Pre­sence Range IE type and reference Semantics description
MDT ActivationMENUMERATED (Immediate MDT only, Logged MDT only, Immediate MDT and Trace, …)
CHOICE Area Scope of MDTM
>Cell based
>>Cell ID List for MDT1..<maxnoofCellIDforMDT>
>>>E-UTRA CGIM 9.3.1.9
>TA based
>>TA List for MDT1..<maxnoofTAforMDT>
>>>TACM 9.3.3.10The TAI is derived using the current serving PLMN.
>PLMN wideNULL
>TAI based
>>TAI List for MDT1..<maxnoofTAforMDT>
>>>TAIM 9.3.3.11
MDT ModeMOCTET STRINGMDTMode IE defined in TS 36.413.
Signalling Based MDT PLMN ListOMDT PLMN List
9.3.1.168
Range bound Explanation
maxnoofCellIDforMDTMaximum no. of Cell ID subject for MDT scope. Value is 32.
maxnoofTAforMDTMaximum no. of TA subject for MDT scope. Value is 8.
Up

9.3.1.171  M1 Configuration |R16|p. 277

This IE defines the parameters for M1 measurement collection.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
M1 Reporting TriggerMENUMERATED (periodic, A2event-triggered, A2event-triggered periodic, …)-
M1 Threshold Event A2C-ifM1A2trigger-
>CHOICE Threshold TypeM-
>>RSRP
>>>Threshold RSRPMINTEGER (0..127)Corresponds to the RSRP-Range IE as defined in TS 38.331.-
>>RSRQ
>>>Threshold RSRQMINTEGER (0..127)Corresponds to the RSRQ-Range IE as defined in TS 38.331.-
>>SINR
>>>Threshold SINRMINTEGER (0..127)Corresponds to the SINR-Range IE as defined in TS 38.331.-
M1 Periodic ReportingC-ifperiodicMDT-
>Report IntervalMENUMERATED (ms120, ms240, ms480, ms640, ms1024, ms2048, ms5120, ms10240, min1, min6, min12, min30, min60)Corresponds to the ReportInterval IE as defined in TS 38.331. The value min60 is not used in the specification.-
>Report AmountMENUMERATED (1, 2, 4, 8, 16, 32, 64, infinity)Number of reports.-
>Extended Report IntervalOENUMERATED (ms20480, ms40960, ...)This IE is the extension of the Report Interval IE. If this IE is present, the Report Interval IE is ignored.YESignore
Include Beam Measurements IndicationOENUMERATED (true, …)To configure whether the UE should include beam level measurements.YESignore
Beam Measurements Report ConfigurationC-ifM1BeamMeasIndYESignore
>Beam Measurements Report Quantity0..1This IE indicates the beam measurement quantity and corresponds to the MeasReportQuantity IE as defined in TS 38.331.-
>>RSRPMENUMERATED (true, …)-
>>RSRQMENUMERATED (true, …)-
>>SINRMENUMERATED (true, …)-
>MaxNrofRS-IndexesTo ReportOINTEGER (1..64, …)Indicates the max number of beam measurements to be reported and corresponds to the maxNrofRS-IndexesToReport in the ReportConfigNR IE as defined in TS 38.331.-
Condition Explanation
C-ifM1A2trigger This IE shall be present if the M1 Reporting Trigger IE is set to "A2event-triggered" or to "A2event-triggered periodic".
C-ifperiodicMDT This IE shall be present if the M1 Reporting Trigger IE is set to "periodic", or to "A2event-triggered periodic".
C-ifM1BeamMeasInd This IE shall be present if the Include Beam Measurements Indication IE is set to "true".
Up

9.3.1.172  M4 Configuration |R16|p. 279

This IE defines the parameters for M4 measurement collection.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
M4 Collection PeriodMENUMERATED (ms1024, ms2048, ms5120, ms10240, min1, …)-
M4 Links to LogMENUMERATED (uplink, downlink, both-uplink-and-downlink, …)-
M4 Report AmountOENUMERATED (1, 2, 4, 8, 16, 32, 64, infinity, …)Number of reports. YESignore
Up

9.3.1.173  M5 Configuration |R16|p. 279

This IE defines the parameters for M5 measurement collection.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
M5 Collection PeriodMENUMERATED (ms1024, ms2048, ms5120, ms10240, min1, …)-
M5 Links to LogMENUMERATED (uplink, downlink, both-uplink-and-downlink, …)-
M5 Report AmountOENUMERATED (1, 2, 4, 8, 16, 32, 64, infinity, …)Number of reportsYESignore
Up

9.3.1.174  M6 Configuration |R16|p. 280

This IE defines the parameters for M6 measurement collection.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
M6 Report IntervalMENUMERATED (ms120, ms240, ms480, ms640, ms1024, ms2048, ms5120, ms10240, ms20480, ms40960, min1, min6, min12, min30, …)-
M6 Links to LogMENUMERATED (uplink, downlink, both-uplink-and-downlink, …)-
M6 Report AmountOENUMERATED (1, 2, 4, 8, 16, 32, 64, infinity, …)Number of reportsYESignore
Excess Packet Delay Threshold ConfigurationO 9.3.1.244YESignore
Up

9.3.1.175  M7 Configuration |R16|p. 280

This IE defines the parameters for M7 measurement collection.
IE/Group Name Pre­sence Range IE type and refe­rence Semantics description Criti­cality Assi­gned Criti­cality
M7 Collection PeriodMINTEGER (1..60, …)Unit: minutes-
M7 Links to LogMENUMERATED (uplink, downlink, both-uplink-and-downlink, …)-
M7 Report AmountOENUMERATED (1, 2, 4, 8, 16, 32, 64, infinity, …)Number of reportsYESignore
Up

9.3.1.176  MDT Location Information |R16|p. 280

This IE defines the MDT Location Information.
IE/Group Name Pre­sence Range IE type and reference Semantics description
MDT Location InformationMBITSTRING (SIZE(8)) Each position in the bitmap represents requested location information as defined in TS 37.320.
First Bit = GNSS
Other bits are reserved for future use and are ignored if received.
Value "1" indicates "activate" and value "0" indicates "do not activate".
Up

9.3.1.177  Bluetooth Measurement Configuration |R16|p. 281

This IE defines the parameters for Bluetooth measurement collection.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Bluetooth Measurement ConfigurationMENUMERATED (Setup, …)
Bluetooth Measurement Configuration Name List0..1This IE is present if the Bluetooth Measurement Configuration IE is set to "Setup".
>Bluetooth Measurement Configuration Name Item1..<maxnoofBluetoothName>
>>Bluetooth Measurement Configuration NameMOCTET STRING (SIZE (1..248))
BT RSSIOENUMERATED (true, …)In case of Immediate MDT, it corresponds to M8 measurement as defined in TS 37.320.
Range bound Explanation
maxnoofBluetoothNameMaximum no. of Bluetooth local name used for Bluetooth measurement collection. Value is 4.
Up

9.3.1.178  WLAN Measurement Configuration |R16|p. 281

This IE defines the parameters for WLAN measurement collection.
IE/Group Name Pre­sence Range IE type and reference Semantics description
WLAN Measurement ConfigurationMENUMERATED (Setup, …)
WLAN Measurement Configuration Name List0..1This IE is present if the Bluetooth Measurement Configuration IE is set to "Setup".
>WLAN Measurement Configuration Name Item1..<maxnoofWLANName>
>>WLAN Measurement Configuration NameMOCTET STRING (SIZE (1..32))
WLAN RSSIOENUMERATED (true, …)In case of Immediate MDT, it corresponds to M8 as defined in TS 37.320.
WLAN RTTOENUMERATED (true, …)In case of Immediate MDT, it corresponds to M9 as defined in TS 37.320.
Range bound Explanation
maxnoofWLANNameMaximum no. of WLAN SSID used for WLAN measurement collection. Value is 4.
Up

9.3.1.179  Sensor Measurement Configuration |R16|p. 281

This IE defines the parameters for Sensor measurement collection.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Sensor Measurement ConfigurationMENUMERATED (Setup, …)
Sensor Measurement Configuration Name List0..1
>Sensor Measurement Configuration Name Item1..<maxnoofSensorName>
>>CHOICE Sensor NameM
>>>Uncompensated Barometric
>>>>Uncompensated Barometric ConfigurationMENUMERATED (true, …)
>>>UE speed
>>>>UE Speed ConfigurationMENUMERATED (true, …)
>>>UE orientation
>>>>UE orientation ConfigurationMENUMERATED (true, …)
Range bound Explanation
maxnoofSensorNameMaximum no. of Sensor local name used for Sensor measurement collection. Value is 3
Up

9.3.1.180  Event Trigger Logged MDT Configuration |R16|p. 282

This IE defines the event trigger logged MDT configuration.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE Event trigger typeM
>Out-of-coverage
>>Out-of-Coverage ConfigurationMENUMERATED (true, ...)
>L1 Event
>>CHOICE L1 Event ThresholdM
>>>RSRP
>>>>Threshold RSRPMINTEGER (0..127)Corresponds to the RSRP-Range IE as defined in TS 38.331.
>>>RSRQ
>>>>Threshold RSRQMINTEGER (0..127)Corresponds to the RSRQ-Range IE as defined in TS 38.331.
>>HysteresisMINTEGER (0..30)This parameter is used within the entry and leave condition of an event triggered reporting condition.
>>Time to TriggerMENUMERATED (ms0, ms40, ms64, ms80, ms100, ms128, ms160, ms256, ms320, ms480, ms512, ms640, ms1024, ms1280, ms2560, ms5120)Time during which specific criteria for the event needs to be met in order to trigger a measurement report.
Up

Up   Top   ToC