Tech-invite3GPPspaceIETFspace
21222324252627282931323334353637384‑5x

Content for  TS 38.413  Word version:  18.2.0

Top   Top   Up   Prev   Next
1…   4…   8…   8.2…   8.2.3…   8.3…   8.3.4…   8.4…   8.4.3…   8.5…   8.7…   8.8…   8.10…   8.12…   8.17…   9…   9.2…   9.2.2…   9.2.3…   9.2.4…   9.2.6…   9.2.7…   9.2.9…   9.2.11…   9.2.16…   9.2.17…   9.3…   9.3.1.21…   9.3.1.41…   9.3.1.61…   9.3.1.81…   9.3.1.101…   9.3.1.121…   9.3.1.141…   9.3.1.161…   9.3.1.181…   9.3.1.205…   9.3.1.222…   9.3.1.245…   9.3.2…   9.3.3…   9.3.3.21…   9.3.3.42…   9.3.4…   9.3.4.10…   9.3.5…   9.4…   9.4.4   9.4.5   9.4.6…   9.5…   10…

 

9.3.3.42  NID |R16|p. 340

This IE is used to identify (together with a PLMN identifier) a Stand-alone Non-Public Network.
IE/Group Name Pre­sence Range IE type and reference Semantics description
NIDMBIT STRING (SIZE(44))Defined in TS 23.003.
Up

9.3.3.43  CAG ID |R16|p. 340

This IE is used to identify (together with a PLMN identifier) a Public Network Integrated NPN.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CAG IDMBIT STRING (SIZE(32))Defined in TS 23.003.
Up

9.3.3.44  NPN Support |R16|p. 341

For SNPN, this IE identifies a supported SNPN together with the associated PLMN ID.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE NPN SupportM
>SNPN
>>NIDM 9.3.3.42
Up

9.3.3.45  Allowed PNI-NPN List |R16|p. 341

This IE contains information on allowed UE mobility in PNI-NPN including allowed PNI-NPNs and whether the UE is allowed to access non-CAG cells for each PLMN.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Allowed PNI-NPN Item1..<maxnoofEPLMNs+1>
>PLMN IdentityM 9.3.3.5
>PNI-NPN RestrictedMENUMERATED (restricted, not-restricted, …) If set to "restricted", indicates that the UE is not allowed to access non-CAG cells for this PLMN.
>Allowed CAG List per PLMN1..<maxnoofAllowedCAGsperPLMN>
>>CAG IDM 9.3.3.43
Range bound Explanation
maxnoofEPLMNs+1Maximum no. of equivalent PLMNs plus one serving PLMN. Value is 16.
maxnoofAllowedCAGsperPLMNMaximum number of CAGs per PLMN in UE's Allowed PNI-NPN list. Value is 256.
Up

9.3.3.46  NPN Access Information |R16|p. 341

This IE contains information to perform access control for NPN.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE NPN Access InformationM
>PNI-NPN Access Information
>>Cell CAG ListM 9.3.3.47
Up

9.3.3.47  Cell CAG List |R16|p. 342

This IE indicates the list of CAG IDs supported by a cell.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Cell CAG List1..<maxnoofCAGsperCell>
>CAG IDM 9.3.3.43
Range bound Explanation
maxnoofCAGsperCellMaximum no. of CAGs per cell. Value is 64. Max is 12 in this release.
Up

9.3.3.48  UL CP Security Information |R16|p. 342

This IE contains NAS level security information to enable UE authentication by the AMF as described in TS 33.401.
IE/Group Name Pre­sence Range IE type and reference Semantics description
UL NAS MACMBIT STRING (SIZE(16))Defined in TS 33.401.
UL NAS CountMBIT STRING (SIZE(5))Defined in TS 33.401.
Up

9.3.3.49  DL CP Security Information |R16|p. 342

This IE contains NAS level security information to be forwarded to the UE as described in TS 33.401.
IE/Group Name Pre­sence Range IE type and reference Semantics description
DL NAS MACMBIT STRING (SIZE(16))Defined in TS 33.401.
Up

9.3.3.50  Configured TAC Indication |R16|p. 342

This IE indicates that in all NR cells served by the gNB, the TAC with which this IE is associated, is only configured but not broadcast.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Configured TAC IndicationMENUMERATED (true, ...)
Up

9.3.3.51  Extended AMF Name |R16|p. 342

This IE provides extended human readable name of the AMF.
IE/Group Name Pre­sence Range IE type and reference Semantics description
AMF Name VisibleOVisibleString (SIZE(1..150, …))
AMF Name UTF8OUTF8String (SIZE(1..150, …))
Up

9.3.3.52  Extended UE Identity Index Value |R16|p. 343

This IE is used by the NG-RAN node to calculate the Paging Frame and Paging Occasion as specified in TS 36.304, the Paging Frame and Paging Occasion for eDRX and the UE_ID based subgroup ID as specified in TS 38.304.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Extended UE Identity Index ValueMBIT STRING (SIZE(16))
Up

9.3.3.53  NR NTN TAI Information |R17|p. 343

This IE contains the TAI information for NR NTN.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Serving PLMNMPLMN Identity
9.3.3.5
Indicates the UE's serving PLMN.
TAC List in NR NTN1..<maxnoofTACsinNTN>Includes all TAC(s) broadcast in the cell, for the UE's serving PLMN.
>TACM 9.3.3.10
UE Location Derived TAC in NR NTNOTAC
9.3.3.10
This IE contains TAC information derived from the actual UE location, if available.
Range bound Explanation
maxnoofTACsinNTNMaximum no. of TACs broadcast per cell. Value is 12.
Up

9.3.3.54  Inter-system SON Information Request |R17|p. 343

This IE contains the request information to be transferred.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE Inter-system SON Information RequestM
>NG-RAN Cell Activation
>>Inter-system Cell Activation RequestM 9.3.3.56
>Resource Status
>>Inter-system Resource Status Request M 9.3.3.59
Up

9.3.3.55  Inter-system SON Information Reply |R17|p. 343

This IE contains the reply information to be transferred.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE Inter-system SON Information ReplyM
>NG-RAN Cell Activation
>>Inter-system Cell Activation ReplyM 9.3.3.58
>Resource Status
>>Inter-system Resource Status Reply M 9.3.3.61
Up

9.3.3.56  Inter-system Cell Activation Request |R17|p. 344

This IE contains request information for inter-system Cell Activation.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Activation IDMINTEGER (0..16384, …)Allocated by the eNB.
Cells to Activate List1..<maxnoofCellsinNGRANNode>
>NG-RAN CGIM 9.3.1.73
Range bound Explanation
maxnoofCellsinNGRANNodeMaximum no. of cells that can be served by a NG-RAN node. Value is 16384.
Up

9.3.3.57  Inter-system Cell State Indication |R17|p. 344

This IE contains notification information for inter-system Cell Activation and Deactivation.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Notification Cell List1
>Notification Cell Item1..<maxnoofCellsinNGRANNode>
>>NG-RAN CGIM 9.3.1.73
>>Notify FlagM ENUMERATED (Activated, Deactivated, ...)
Range bound Explanation
maxnoofCellsinNGRANNodeMaximum no. of cells that can be served by a NG-RAN node. Value is 16384.
Up

9.3.3.58  Inter-system Cell Activation Reply |R17|p. 344

This IE contains reply information for inter-system Cell Activation.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Activated Cells List1..<maxnoofCellsinNGRANNode>
>NG-RAN CGIM 9.3.1.73
Activation IDMINTEGER (0..16384, …)Allocated by the eNB.
Range bound Explanation
maxnoofCellsinNGRANNodeMaximum no. of cells that can be served by a NG-RAN node. Value is 16384.
Up

9.3.3.59  Inter-system Resource Status Request |R17|p. 344

This IE contains information on the requested Inter-system Load Reporting reporting.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Reporting SystemM 9.3.1.237
Report CharacteristicsMBITSTRING
(SIZE(32))
Each position in the bitmap indicates measurement object the receiving node is requested to report.
First Bit = Number of Active UEs,
Second Bit = RRC connections,
Third Bit = PRB.
Other bits reserved for future use.
CHOICE report typeM
>Event based reporting
>>Inter-system Resource Threshold LowMINTEGER (0..100)Inter-system Resource Status reporting is enabled when Composite Available Capacity is above this threshold or is disabled when Composite Available Capacity is below this threshold.
The reporting node sends a report when the cell Composite Available Capacity becomes greater than or equal to the threshold.
>>Inter-system Resource Threshold HighMINTEGER (0..100)Inter-system Resource Status reporting is enabled when Composite Available Capacity is below this threshold or is disabled when Composite Available Capacity is above this threshold.
The reporting node sends a report when the cell Composite Available Capacity becomes smaller than or equal to the threshold.
>>Number of Measurement Reporting LevelsMENUMERATED (2, 3, 4, 5, 10, ..., 0)The reporting node divides the cell load scale into the indicated number of reporting levels, evenly distributed on a linear scale between the Inter-system Resource Threshold Low and the Inter-system Resource Threshold High. The reporting node sends a report each time the cell load changes from one reporting level to another.
>Periodic Reporting
>>Reporting PeriodicityM ENUMERATED (stop, single, 1000ms, 2000ms, 5000ms, 10000ms, …) Periodicity that can be used for reporting. If the value is "stop", the reporting node is asked to stop the periodic reporting. If the value is "single" there is only one report. If the value is "0", the IE is ignored and only the Inter-system Resource Threshold Low and the Inter-system Resource Threshold High are used as the reporting levels.
Range bound Explanation
maxnoofReportedCellsMaximum no. of cells that can be reported. Value is 256.
Up

9.3.3.60  Inter-system Resource Status Report |R17|p. 346

This IE contains the Inter-system load report.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE Reporting SystemM
>E-UTRAN
>>E-UTRAN Cell Report List1
>>>E-UTRAN Cell Report Item1..<maxnoofReportedCells>
>>>>Cell IDME-UTRA CGI
9.3.1.9
>>>>E-UTRAN Composite Available Capacity GroupM 9.3.1.196Corresponds to the Composite Available Capacity Group IE as defined in TS 36.423.
>>>>Number of Active UEsOINTEGER (0..16777215, …)Corresponds to the Number of Active UEs IE as defined in TS 36.314.
>>>>RRC ConnectionsOINTEGER (1..65536, …)Corresponds to the RRC Connections IE as defined in TS 38.423.
>>>>E-UTRAN Radio Resource StatusO 9.3.1.200
>NG-RAN
>>NG-RAN Cell Report List1
>>>NG-RAN Cell Report Item1..<maxnoofReportedCells>
>>>>Cell IDMNG-RAN CGI
9.3.1.73
>>>>NR Composite Available Capacity GroupM E-UTRAN Composite Available Capacity Group
9.3.1.196
Corresponds to the Composite Available Capacity Group IE as defined in TS 36.423.
>>>>Number of Active UEsOINTEGER (0..16777215, …)Corresponds to the Number of Active UEs IE as defined in TS 38.423.
>>>>RRC ConnectionsOINTEGER (1..65536, …)Corresponds to the RRC Connections IE as defined in TS 38.423.
>>>>NR Radio Resource StatusO 9.3.1.205
Range bound Explanation
maxnoofReportedCellsMaximum no. of cells that can be reported. Value is 256.
Up

9.3.3.61  Inter-system Resource Status Reply |R17|p. 346

This IE indicates for which cell(s) the inter-system load reporting was successfully initiated.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Reporting SystemM 9.3.1.237
Up

9.3.3.62  Hashed UE Identity Index Value |R16|p. 346

This IE is the 13 Most Significant Bits (MSBs) of the Hashed ID defined in TS 38.304 or TS 36.304.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Hashed UE Identity Index ValueM BIT STRING (SIZE(13, …))
Up

9.3.3.63  Paging Policy Differentiation |R18|p. 347

This IE provides paging policy differentiation information for a UE in RRC_INACTIVE state.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Paging Policy IndicatorOINTEGER (0..7, …)Used for paging policy differentiation as specified in TS 23.501).
Allocation and Retention PriorityO 9.3.1.19
QoS Flow IdentifierO 9.3.1.51
PDU Session IDO 9.3.1.50
5QIOINTEGER (0..255, …)Indicates the 5QI associated with the PDU session
Up

9.3.3.64  NR Paging Long eDRX Information for RRC INACTIVE |R18|p. 347

This IE indicates the NR Paging long eDRX parameters as defined in TS 38.304.
IE/Group Name Pre­sence Range IE type and reference Semantics description
NR Paging Long eDRX Cycle for RRC INACTIVEMENUMERATED (hf2, hf4, hf8, hf16, hf32, hf64, hf128, hf256, hf512, hf1024, …)Tlong-eDRX, RAN defined in TS 38.304.
Unit: [number of hyperframes].
NR Paging Time Window for RRC_INACTIVEMENUMERATED (s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, s14, s15, s16, s17, s18, s19, s20, s21, s22, s23, s24, s25, s26, s27, s28, s29, s30, s31, s32, …)Unit: [1.28 seconds]
Up

9.3.3.65  CAG List for MDT |R18|p. 347

IE/Group Name Pre­sence Range IE type and reference Semantics description
CAG List for MDT1..<maxnoofCAGforMDT>
>PLMN IdentityM 9.3.3.5
>CAG IDM 9.3.3.43
Range bound Explanation
maxnoofCAGforMDTMaximum no. of CAG IDs for MDT area scope. Value is 256.
Up

Up   Top   ToC