Content for  TS 38.413  Word version:  18.0.0

9.3.1.222  QMC Deactivation |R17|  p. 295

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
QoE Reference List		1..<maxnoofUEAppLayerMeas>
>QoE Reference	M		OCTET STRING (SIZE(6))	QoE Reference, as defined in clause 5.2 of TS 28.405. It consists of MCC+MNC+QMC ID, where the MCC and MNC are coming with the QMC activation request from the management system to identify one PLMN containing the management system, and QMC ID is a 3-bytes Octet String.

Range bound	Explanation
maxnoofUEAppLayerMeas	Maximum no. of UE application layer measurement. Value is 16.

9.3.1.223  QMC Configuration Information |R17|  p. 296

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
UE Application Layer Measurement Information List		1
>UE Application Layer Measurement Information Item		1..<maxnoofUEAppLayerMeas>
>>UE Application Layer Measurement Configuration Information	M		9.3.1.224

Range bound	Explanation
maxnoofUEAppLayerMeas	Maximum no. of UE application layer measurements. Value is 16.

9.3.1.224  UE Application Layer Measurement Configuration Information |R17|  p. 296

IE/Group Name	Pre­sence	Range	IE type and refe­rence	Semantics description	Criti­cality	Assi­gned Criti­cality
QoE Reference	M		OCTET STRING (SIZE(6))	QoE Reference, as defined in clause 5.2 of TS 28.405. It consists of MCC+MNC+QMC ID, where the MCC and MNC are coming with the QMC activation request from the management system to identify one PLMN containing the management system, and QMC ID is a 3-bytes Octet String.	-
Service Type	M		ENUMERATED (QMC for DASH streaming, QMC for MTSI, QMC for VR, ...)	This IE indicates the service type of QoE measurements.	-
CHOICE Area Scope of QMC	O				-
>Cell based
>>Cell ID List for QMC		1..<maxnoofCellIDforQMC>			-
>>>NG-RAN CGI	M		9.3.1.73	This IE can indicate the NR CGI and E-UTRA CGI.	-
>TA based
>>TA List for QMC		1..<maxnoofTAforQMC>			-
>>>TAC	M		9.3.3.10	The TAI is derived using the current serving PLMN.	-
>TAI based
>>TAI List for QMC		1..<maxnoofTAforQMC>			-
>>>TAI	M		9.3.3.11		-
>PLMN area based
>>PLMN List for QMC		1..<maxnoofPLMNforQMC>			-
>>>PLMN Identity	M		9.3.3.5		-
Measurement Collection Entity IP Address	M		Transport Layer Address 9.3.2.4	The IP address of the entity receiving the QoE measurement report.	-
QoE Measurement Status	O		ENUMERATED (ongoing, …)	Indicates whether the QoE measurement has been started. Present in case of NG-based handover.	-
Container for Application Layer Measurement Configuration	O		OCTET STRING (SIZE(1.. 8000))	Contains application layer measurement configuration, see Annex L in 26.247 [46], clause 16.5 of TS 26.114 and clause 9 of TS 26.118. Present in case of initial QoE configuration, and shall be included in Source to Target Transparent Container IE for signalling-based QMC during NG-based handover.	-
Measurement Configuration Application Layer ID	O		INTEGER (0..15, …)	This IE is present only when the message containing it is NG-based handover related. The IE indicates the identity of the application layer measurement configuration and corresponds to the MeasConfigAppLayerId IE as defined in TS 38.331.	-
Slice Support List for QMC		0..1			-
>Slice Support QMC Item		1..<maxnoofSNSSAIforQMC>			-
>>S-NSSAI	M		9.3.1.24		-
CHOICE MDT Alignment Information	O			Indicates the MDT measurements with which alignment is required.	-
>S-based MDT
>>NG-RAN Trace ID	M		OCTET STRING (SIZE(8))	This IE is composed of the following: Trace Reference defined in TS 32.422 (leftmost 6 octets, with PLMN information encoded as in clause 9.3.3.5), and Trace Recording Session Reference defined in TS 32.422 (last 2 octets).	-
Available RAN Visible QoE Metrics	O		9.3.1.225	Present in case of initial QoE configuration and in case of NG-based handover for signalling-based QoE measurement.	-
Assistance Information for QoE Measurement	O		INTEGER (1..16, …)	This IE indicates the suggested priority of the application layer measurement configuration. Values are ordered in decreasing order of priority, i.e. with 1 as the highest priority and 16 as the lowest priority.	YES	ignore
MBS Communication Service Type	O		ENUMERATED (broadcast, multicast, ...)	This IE indicates for which type of MBS communication service the QoE measurement configuration pertains to.	YES	ignore

Range bound	Explanation
maxnoofCellIDforQMC	Maximum no. of Cell ID subject for QMC scope. Value is 32.
maxnoofTAforQMC	Maximum no. of TA subject for QMC scope. Value is 8.
maxnoofPLMNforQMC	Maximum no. of PLMNs in the PLMN list for QMC scope. Value is 16.
maxnoofSNSSAIforQMC	Maximum no. of S-NSSAIs in the S-NSSAI list for QMC scope. Value is 16.

9.3.1.225  Available RAN Visible QoE Metrics |R17|  p. 299

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
Application Layer Buffer Level List	O		ENUMERATED (true, ...)	The IE defines whether the Buffer Level can be collected as a RAN visible QoE metric by NG-RAN from UE, for DASH streaming and VR service types.
Playout Delay for Media Startup	O		ENUMERATED (true, ...)	The IE defines whether the Playout delay can be collected as a RAN visible QoE metric by NG-RAN from UE, for DASH streaming and VR service types.

9.3.1.226  Void

9.3.1.227  NR Paging eDRX Information |R17|  p. 299

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
NR Paging eDRX Cycle	M		ENUMERATED (hfquarter, hfhalf, hf1, hf2, hf4, hf8, hf16, hf32, hf64, hf128, hf256, hf512, hf1024, …)	TeDRX CN defined in TS 38.304. Unit: [number of hyperframes].
NR Paging Time Window	O		ENUMERATED (s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, s14, s15, s16, …, s17, s18, s19, s20, s21, s22, s23, s24, s25, s26, s27, s28, s29, s30, s31, s32)	PTW defined in TS 38.304. Unit: [1.28 seconds]

9.3.1.228  RedCap Indication |R17|  p. 300

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
RedCap Indication	M		ENUMERATED (RedCap, ...)

9.3.1.229  Target NSSAI Information |R17|  p. 300

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
Target NSSAI	M		9.3.1.230
Index to RAT/Frequency Selection Priority	M		9.3.1.61

9.3.1.230  Target NSSAI |R17|  p. 300

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
Target S-NSSAI List		1
>Target S-NSSAI Item		1..<maxnoofTargetS-NSSAIs>
>>S-NSSAI	M		9.3.1.24

Range bound	Explanation
maxnoofTargetS-NSSAIs	Maximum no. of Target S-NSSAIs. Value is 8.

9.3.1.231  UE Slice Maximum Bit Rate List |R17|  p. 300

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
UE Slice Maximum Bit Rate Item		1..<maxnoof AllowedS-NSSAIs>		Applicable across all GBR and Non-GBR QoS flows.
>S-NSSAI	M		9.3.1.24
>UE Slice Maximum Bit Rate Downlink	M		Bit Rate 9.3.1.4	This IE indicates the downlink UE-Slice-MBR as specified in TS 23.501.
>UE Slice Maximum Bit Rate Uplink	M		Bit Rate 9.3.1.4	This IE indicates the uplink UE-Slice-MBR as specified in TS 23.501.

Range bound	Explanation
maxnoofAllowedS-NSSAIs	Maximum no. of allowed S-NSSAI. Value is 8.

9.3.1.232  PEIPS Assistance Information |R17|  p. 301

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
CN Subgroup ID	M		INTEGER (0..7, …)

9.3.1.233  5G ProSe Authorized |R17|  p. 301

IE/Group Name	Pre­sence	Range	IE type and refe­rence	Semantics description	Criti­cality	Assi­gned Criti­cality
5G ProSe Direct Discovery	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the UE is authorized for 5G ProSe Direct Discovery	-
5G ProSe Direct Communication	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the UE is authorized for 5G ProSe Direct Communication	-
5G ProSe Layer-2 UE-to-Network Relay	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the UE is authorized for 5G ProSe Layer-2 UE-to-Network Relay	-
5G ProSe Layer-3 UE-to-Network Relay	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the UE is authorized for 5G ProSe Layer-3 UE-to-Network Relay	-
5G ProSe Layer-2 Remote UE	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the UE is authorized for 5G ProSe Layer-2 Remote UE	-
5G ProSe Layer-2 Multi-path	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the 5G ProSe Layer-2 Remote UE is authorized for 5G ProSe multi-path transmission	YES	ignore
5G ProSe Layer-2 UE-to-UE Relay	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the UE is authorized for 5G ProSe Layer-2 UE-to-UE Relay UE	YES	ignore
5G ProSe Layer-2 UE-to-UE Remote	O		ENUMERATED (authorized, not authorized, ...)	Indicates whether the UE is authorized for 5G ProSe Layer-2 UE-to-UE Remote UE.	YES	ignore

9.3.1.234  5G ProSe PC5 QoS Parameters |R17|  p. 302

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
5G ProSe PC5 QoS Flow List		1
>5G ProSe PC5 QoS Flow Item		1..<maxnoofPC5QoSFlows>
>>PQI	M		INTEGER (0..255, …)	PQI is a special 5QI as specified in TS 23.501.
>>5G ProSe PC5 Flow Bit Rates		0..1		Only applies for GBR QoS flows.
>>>Guaranteed Flow Bit Rate	M		Bit Rate 9.3.1.4	Guaranteed Bit Rate for the PC5 QoS flow. Details in TS 23.501.
>>>Maximum Flow Bit Rate	M		Bit Rate 9.3.1.4	Maximum Bit Rate for the PC5 QoS flow. Details in TS 23.501.
>>Range	O		ENUMERATED (m50, m80, m180, m200, m350, m400, m500, m700, m1000, …)	Only applies for groupcast.
5G ProSe PC5 Link Aggregate Bit Rates	O		Bit Rate 9.3.1.4	Only applies for Non-GBR QoS flows.

Range bound	Explanation
maxnoofPC5QoSFlows	Maximum no. of PC5 QoS flows allowed towards one UE. Value is 2048.

9.3.1.235  Last Visited PSCell Information |R17|  p. 303

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
PSCell ID	O		NG-RAN CGI 9.3.1.73	This IE is present when the SCG resources are configured for the UE.
Time Stay	M		INTEGER (0..40950)	The duration of the time the UE stayed in the cell in 1/10 seconds. If the UE stays in a cell more than 4095s, this IE is set to 40950. Or the duration of the time when no SCG resources are configured for the UE.

9.3.1.236  MBS QoS Flows To Be Setup List |R17|  p. 303

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
MBS QoS Flows Setup Request Item		1..<maxnoofMBSQoSFlows>
>MBS QoS Flow Identifier	M		QoS Flow Identifier 9.3.1.51
>MBS QoS Flow Level QoS Parameters	M		QoS Flow Level QoS Parameters 9.3.1.12

Range bound	Explanation
maxnoofMBSQoSflows	Maximum no. of MBS QoS flows allowed within one MBS session. Value is 64.

9.3.1.237  Reporting System |R17|  p. 304

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
CHOICE Reporting System
>E-UTRAN
>>E-UTRAN Cell To Report List		1
>>>E-UTRAN Cell To Report Item		1..<maxnoofReportedCells>
>>>>Cell ID	M		E-UTRA CGI 9.3.1.9
			>
>>NG-RAN Cell To Report List		1
>>>NG-RAN Cell To Report Item		1..<maxnoofReportedCells>
>>>>Cell ID	M		NG-RAN CGI 9.3.1.73
>No Reporting			NULL	Resource status not available. Applicable to the Inter-system Resource Status Reply IE.

Range bound	Explanation
maxnoofReportedCells	Maximum no. of cells that can be reported. Value is 256.

9.3.1.238  TAI NSAG Support List |R17|  p. 304

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
TAI NSAG Support Item		1..<maxnoofNSAGs>
>NSAG ID	M		INTEGER (0..255, …)
>NSAG Slice Support List	M		Extended Slice Support List 9.3.1.191	Indicates the list of slices which belong to the NSAG.

Range bound	Explanation
maxnoofNSAGs	Maximum no. of Slice Groups for the TAI. Value is 256.

9.3.1.239  NGAP Protocol IE-Id |R17|  p. 304

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
NGAP Protocol IE-Id	M		INTEGER (0..65535)

9.3.1.240  NGAP Protocol IE Support Information |R17|  p. 304

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
NGAP Protocol IE Support Information	M		ENUMERATED (supported, not-supported, ...)

9.3.1.241  NGAP Protocol IE Presence Information |R17|  p. 305

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
NGAP Protocol IE Presence Information	M		ENUMERATED (present, not present)

9.3.1.242  NGAP IE Support Information Response List |R17|  p. 305

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
NGAP IE Support Information Response Item		1..<maxnoofIESupportInfo>
>NGAP Protocol IE-Id	M		9.3.1.239
>NGAP Protocol IE Support Information	M		9.3.1.240
>NGAP Protocol IE Presence Information	M		9.3.1.241

Range bound	Explanation
maxnoofIESupportInfo	Maximum no. of IE Support Information. Value is 32.

9.3.1.243  MDT PLMN Modification List |R17|  p. 305

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
MDT PLMN Modification List		0..<maxnoofMDTPLMNs>		An empty list indicates there is no PLMN allowed for MDT.
>PLMN Identity	M		9.3.3.5

Range bound	Explanation
maxnoofMDTPLMNs	Maximum no. of PLMNs in the MDT PLMN list. Value is 16.

9.3.1.244  Excess Packet Delay Threshold Configuration |R17|  p. 305

IE/Group Name	Pre­sence	Range	IE type and reference	Semantics description
Excess Packet Delay Threshold Item		1..<maxnoofThresholdsForExcessPacketDelay>
>5QI	M		INTEGER (0..255, …)	Indicates the standardized or pre-configured 5QI as specified in TS 23.501.
>Excess Packet Delay Threshold Value	M		ENUMERATED (ms0.25, ms0.5, ms1, ms2, ms4, ms5, ms10, ms20, ms30, ms40, ms50, ms60, ms70, ms80, ms90, ms100, ms150, ms300, ms500, ...)

Range bound	Explanation
maxnoofThresholdsForExcessPacketDelay	Maximum no. of thresholds for Excess Packet Delay configuration. Value is 255.