Content for TS 38.331 Word version: 18.0.0

1… 4… 5… 5.2.2.4… 5.3… 5.3.3… 5.3.5… 5.3.5.5… 5.3.5.6… 5.3.5.7… 5.3.5.13… 5.3.5.17… 5.3.6… 5.3.8… 5.3.13… 5.3.14… 5.4… 5.5… 5.5.3… 5.5.4… 5.5.4.15… 5.5.4.23… 5.5.5… 5.5a… 5.7… 5.7.4… 5.7.8… 5.7.12… 5.8… 5.8.9… 5.8.9.2… 5.8.9.8… 5.8.10… 5.8.11… 5.9… 5.10… 6… 6.2.2… 6-2-2-23… 6-2-2-27… 6-2-2-43… 6-2-2-47… 6.3… 6.3.2… 6-3-2-27… 6-3-2-49… 6-3-2-73… 6-3-2-95… 6-3-2-108… 6-3-2-134… 6-3-2-162… 6-3-2-188… 6-3-2-213… 6-3-2-243… 6-3-2-271… 6-3-2-297… 6-3-2-341… 6.3.3… 6-3-3-25… 6-3-3-51… 6.3.4… 6.3.5… 6-3-5-25… 6.3.6… 6.4… 7… 9… 11… A… A.4… B…

6.3.4 Other information elements — AbsoluteTimeInfo — AppLayerIdleInactiveConfig — AppLayerMeasConfig — AreaConfiguration — BT-NameList — DedicatedInfoF1c — EUTRA-AllowedMeasBandwidth — EUTRA-MBSFN-SubframeConfigList — EUTRA-MultiBandInfoList — EUTRA-MultiBandInfoListAerial — EUTRA-NS-PmaxList — EUTRA-PhysCellId — EUTRA-PhysCellIdRange — EUTRA-PresenceAntennaPort1 — EUTRA-Q-OffsetRange — IAB-IP-Address — IAB-IP-AddressIndex — IAB-IP-Usage — LoggingDuration — LoggingInterval — LogMeasResultListBT — LogMeasResultListWLAN — MeasConfigAppLayerId — OtherConfig — PhysCellIdUTRA-FDD — RRC-TransactionIdentifier — Sensor-NameList — TraceReference — UE-MeasurementsAvailable — UTRA-FDD-Q-OffsetRange — VisitedCellInfoList — WLAN-NameList
...

6.3.4 Other information elements p. 1281

– AbsoluteTimeInfo p. 1281

The IE AbsoluteTimeInfo indicates an absolute time in a format YY-MM-DD HH:MM:SS and using BCD encoding. The first/ leftmost bit of the bit string contains the most significant bit of the most significant digit of the year and so on.

AbsoluteTimeInfo information element

-- ASN1START
-- TAG-ABSOLUTETIMEINFO-START
AbsoluteTimeInfo-r16 ::= BIT STRING (SIZE (48))
-- TAG-ABSOLUTETIMEINFO-STOP
-- ASN1STOP

– AppLayerIdleInactiveConfig p. 1281

The IE AppLayerIdleInactiveConfig indicates parameters specific to application layer measurements applicable to RRC_IDLE/RRC_INACTIVE.

AppLayerIdleInactiveConfig information element

-- ASN1START
-- TAG-APPLAYERIDLEINACTIVECONFIG-START
AppLayerIdleInactiveConfig-r18 ::= SEQUENCE {
 configForRRC-IdleInactive-r18 ENUMERATED {true} OPTIONAL, -- Need M
 qoe-Reference-r18 OCTET STRING (SIZE (6)) OPTIONAL, -- Need R
 qoe-MeasurementType-r18 ENUMERATED {sbased, mbased} OPTIONAL, -- Need R
 qoe-AreaScope-r18 Qoe-AreaScope-r18 OPTIONAL, -- Need R
 mce-Id-r18 OCTET STRING (SIZE (1)) OPTIONAL, -- Need R
 availableRAN-VisibleMetrics-r18
  AvailableRAN-VisibleMetrics-r18 OPTIONAL, -- Need R
 ...
}
Qoe-AreaScope-r18 ::= CHOICE {
 cellGlobalIdList CellGlobalIdList-r16,
 trackingAreaCodeList TrackingAreaCodeList-r16,
 trackingAreaIdentityList TrackingAreaIdentityList-r16,
 plmn-IdentityList PLMN-IdentityList2-r16,
 ...
}
AvailableRAN-VisibleMetrics-r18 ::= SEQUENCE {
 appLayerBufferLevelList-r18 ENUMERATED {true} OPTIONAL, -- Need N
 playoutDelayForMediaStartup-r18 ENUMERATED {true} OPTIONAL, -- Need N
 ...
}
-- TAG-APPLAYERIDLEINACTIVECONFIG-STOP
-- ASN1STOP

AppLayerIdleInactiveConfig field descriptions
appLayerBufferLevelList The field defines whether the buffer level for DASH streaming and VR service types can be collected as a RAN visible QoE metric from the UE.
configForRRC-IdleInactive The field indicates whether the application layer measurement configuration is applicable to both RRC_IDLE and RRC_INACTIVE. The field is not configured if the application layer measurement configuration is only applicable to RRC_IDLE or only applicable to RRC_INACTIVE. If the field is not present, the UE assumes that the configuration is not applicable to RRC_IDLE and RRC_INACTIVE.
qoe-AreaScope The field contains the area where the application layer measurement shall start if an application layer session starts.
qoe-MeasurementType Indicates whether the application layer measurement is signalling based or management based.
qoe-Reference Indicates the QoE Reference as defined in clause 5.2 of TS 28.405.
mce-id The field contains the Measurement Collection Entity Id, see TS 28.405.
playoutDelayForMediaStartup The field defines whether the playout delay for DASH streaming and VR service types can be collected as a RAN visible QoE metric from the UE.

– AppLayerMeasConfig p. 1282

The IE AppLayerMeasConfig indicates configuration of application layer measurements.

AppLayerMeasConfig information element

-- ASN1START
-- TAG-APPLAYERMEASCONFIG-START
AppLayerMeasConfig-r17 ::= SEQUENCE {
 measConfigAppLayerToAddModList-r17 SEQUENCE
  (SIZE (1..maxNrofAppLayerMeas-r17)) OF
  MeasConfigAppLayer-r17 OPTIONAL, -- Need N
 measConfigAppLayerToReleaseList-r17 SEQUENCE
  (SIZE (1..maxNrofAppLayerMeas-r17)) OF
  MeasConfigAppLayerId-r17 OPTIONAL, -- Need N
 rrc-SegAllowedSRB4-r17 ENUMERATED {enabled} OPTIONAL, -- Need R
 ...,
 [[
 rrc-SegAllowedSRB5-r18 ENUMERATED {enabled} OPTIONAL, -- Need R
 idleInactiveReportAllowed-r18 ENUMERATED {enabled} OPTIONAL -- Need R
 ]]
}
MeasConfigAppLayer-r17 ::= SEQUENCE {
 measConfigAppLayerId-r17 MeasConfigAppLayerId-r17,
 measConfigAppLayerContainer-r17
  OCTET STRING (SIZE (1..8000)) OPTIONAL, -- Need N
 serviceType-r17 ENUMERATED {
  streaming, mtsi, vr, spare5, spare4, spare3, spare2, spare1
 } OPTIONAL, -- Need M
 pauseReporting-r17 BOOLEAN OPTIONAL, -- Need M
 transmissionOfSessionStartStop-r17 BOOLEAN OPTIONAL, -- Need M
 ran-VisibleParameters-r17
  SetupRelease {RAN-VisibleParameters-r17} OPTIONAL, -- Cond ServiceType
 ...,
 [[
 reportingSRB-r18 ENUMERATED {srb4, srb5, spare2, spare1} OPTIONAL, -- Need M
 appLayerMeasPriority-r18 INTEGER (1..16) OPTIONAL, -- Need M
 appLayerIdleInactiveConfig-r18
  AppLayerIdleInactiveConfig-r18 OPTIONAL  -- Need M
 ]]
}
RAN-VisibleParameters-r17 ::= SEQUENCE {
 ran-VisiblePeriodicity-r17 ENUMERATED {
  ms120, ms240, ms480, ms640, ms1024
 } OPTIONAL, -- Need S
 numberOfBufferLevelEntries-r17 INTEGER (1..8) OPTIONAL, -- Need R
 reportPlayoutDelayForMediaStartup-r17 BOOLEAN OPTIONAL, -- Need M
 ...,
 [[
 ran-VisibleReportingSRB-r18
  ENUMERATED {srb4, srb5, spare2, spare1} OPTIONAL -- Need M
    ]]
}
-- TAG-APPLAYERMEASCONFIG-STOP
-- ASN1STOP

AppLayerMeasConfig field descriptions
appLayerMeasPriority The field indicates the priority of the application layer measurement configuration, where a higher value indicates lower priority. If the field is not configured, the application layer measurement configuration has the lowest priority.
idleInactiveReportAllowed The field indicates whether transmission of application layer measurement reports collected in RRC_IDLE and/or RRC_INACTIVE is allowed and if transmission of application layer measurement configurations applicable to RRC_IDLE and/or RRC_INACTIVE is allowed. If fhe field is not configured, transmission of application layer measurement reports and/or configurations for RRC_IDLE/RRC_INACTIVE are not allowed.
measConfigAppLayerContainer The field contains configuration of application layer measurements, see Annex L (normative) in TS 26.247, in clause 16.5 of TS 26.114 and TS 26.118.
measConfigAppLayerId The field contains the identity of the application layer measurements. When application layer measurements are configured for an SCG, the measConfigAppLayerId is obtained according to clauses 8.3.1 and 8.3.3 of TS 38.423.
pauseReporting The field indicates whether the transmission of measReportAppLayerContainer is paused or not. Value true indicates the transmission of measReportAppLayerContainer is paused; value false indicates the transmission of measReportAppLayerContainer is not paused.
ran-VisibleParameters The field indicates whether RAN visible application layer measurements shall be reported or not.
rrc-SegAllowed This field indicates that RRC segmentation of MeasurementReportAppLayer is enabled. It may be present only if the UE supports RRC segmentation of the MeasurementReportAppLayer message in UL.
ran-VisibleReportingSRB The field indicates the SRB to be used for transmission of RAN visible application layer measurement reports.
reportingSRB The field indicates the SRB to be used for transmission of encapsulated application layer measurement reports. If application layer measurement reports are received and the configured SRB is not available, the UE stores the reports until the SRB is available or the QoE configuration is released.
rrc-SegAllowedSRB4 This field indicates that RRC segmentation of MeasurementReportAppLayer is enabled on SRB4. It may be present only if the UE supports RRC segmentation of the MeasurementReportAppLayer message.
rrc-SegAllowedSRB5 This field indicates that RRC segmentation of MeasurementReportAppLayer is enabled on SRB5. The field is configured for an SCG. It may be present only if the UE supports RRC segmentation of the MeasurementReportAppLayer message.
serviceType Indicates the type of application layer measurement. Value streaming indicates Quality of Experience Measurement Collection for streaming services (see TS 26.247), value mtsi indicates Quality of Experience Measurement Collection for MTSI (see TS 26.114) and value vr indicates Quality of Experience Measurement Collection for VR service (see TS 26.118). The network always configures serviceType when application layer measurements are initially configured and at fullConfig.
transmissionOfSessionStartStop Value true indicates that the UE shall transmit indications when the measurement session in the application layer starts and stops. Value false indicates that the UE shall not transmit any session status indications. The UE transmits a session start indication upon configuration of this field set to value true if a session already has started in the application layer.

RAN-VisibleParameters field descriptions
numberOfBufferLevelEntries The field contains the maximum number of buffer level entries that can be reported for RAN visible application layer measurements. This field is also used by application layer to calculate the interval of RAN visible buffer level measurement, which is equal to the periodicity of RAN visible application layer measurements reporting divided by numberOfBufferLevelEntries.
ran-VisiblePeriodicity The field indicates the periodicity of RAN visible application layer measurements reporting. Value ms120 indicates 120 ms, value ms240 indicates 240 ms and so on. If this field is absent, the periodicity of RAN visible application layer measurements reporting is the same as the reporting periodicity indicated in measConfigAppLayerContainer.
reportPlayoutDelayForMediaStartup The field indicates whether the UE shall report Playout Delay for Media Startup for RAN visible application layer measurements.

Conditional Presence	Explanation
ServiceType	This field is optionally present, Need M, when serviceType is set to streaming or vr. Otherwise, it is absent.

– AreaConfiguration p. 1285

The IE AreaConfiguration indicates area for which UE is requested to perform measurement logging. If not configured, measurement logging is not restricted to specific cells or tracking areas but applies as long as the RPLMN is contained in plmn-IdentityList stored in VarLogMeasReport.

AreaConfiguration information element

-- ASN1START
-- TAG-AREACONFIGURATION-START
AreaConfiguration-r16 ::= SEQUENCE {
 areaConfig-r16 AreaConfig-r16,
 interFreqTargetList-r16 SEQUENCE
  (SIZE (1..maxFreq)) OF
  InterFreqTargetInfo-r16 OPTIONAL -- Need R
}
AreaConfiguration-r17 ::= SEQUENCE {
 areaConfig-r17 AreaConfig-r16 OPTIONAL, -- Need R
 interFreqTargetList-r17 SEQUENCE
  (SIZE (1..maxFreq)) OF
  InterFreqTargetInfo-r16 OPTIONAL -- Need R
}
AreaConfiguration-v1800 ::= SEQUENCE {
 cag-ConfigList-r18 CAG-ConfigList-r18 OPTIONAL, -- Need R
 snpn-ConfigList-r18 SNPN-ConfigList-r18 OPTIONAL  -- Need R
}
AreaConfig-r16 ::= CHOICE {
 cellGlobalIdList-r16 CellGlobalIdList-r16,
 trackingAreaCodeList-r16 TrackingAreaCodeList-r16,
 trackingAreaIdentityList-r16 TrackingAreaIdentityList-r16
}
InterFreqTargetInfo-r16 ::= SEQUENCE {
 dl-CarrierFreq-r16 ARFCN-ValueNR,
 cellList-r16 SEQUENCE
  (SIZE (1..32)) OF PhysCellId OPTIONAL -- Need R
}
CellGlobalIdList-r16 ::= SEQUENCE
 (SIZE (1..32)) OF CGI-Info-Logging-r16
TrackingAreaCodeList-r16 ::= SEQUENCE
 (SIZE (1..8)) OF TrackingAreaCode
TrackingAreaIdentityList-r16 ::= SEQUENCE
 (SIZE (1..8)) OF TrackingAreaIdentity-r16
TrackingAreaIdentity-r16 ::= SEQUENCE {
 plmn-Identity-r16 PLMN-Identity,
 trackingAreaCode-r16 TrackingAreaCode
}
CAG-ConfigList-r18 ::= SEQUENCE
 (SIZE (1..maxNPN-r16)) OF CAG-Config-r18
CAG-Config-r18 ::= SEQUENCE {
 plmn-Identity-r18 PLMN-Identity,
 cag-IdentityList-r18 SEQUENCE
  (SIZE (1..maxNPN-r16)) OF CAG-IdentityInfo-r16
}
SNPN-ConfigList-r18 ::= CHOICE {
 snpn-ConfigCellIdList-r18 SNPN-ConfigCellIdList-r18,
 snpn-ConfigTAIList-r18 SNPN-ConfigTAIList-r18,
 snpn-ConfigIDList-r18 SNPN-ConfigIDList-r18
}
SNPN-ConfigCellIdList-r18 ::= SEQUENCE
 (SIZE (1..maxSNPN-ConfigCellId-r18)) OF SNPN-ConfigCellId-r18
SNPN-ConfigCellId-r18 ::= SEQUENCE {
 cgi-Identity-r18 CGI-Info-Logging-r16,
 nid-IdentityList-r18 SEQUENCE (SIZE (1..maxNPN-r16)) OF NID-r16
}
SNPN-ConfigTAIList-r18 ::= SEQUENCE
 (SIZE (1..maxSNPN-ConfigTAI-r18)) OF SNPN-ConfigTAI-r18
SNPN-ConfigTAI-r18 ::= SEQUENCE {
 tai-Identity-r18 TrackingAreaIdentity-r16,
 nid-IdentityList-r18 SEQUENCE (SIZE (1..maxNPN-r16)) OF NID-r16
}
SNPN-ConfigIDList-r18 ::= SEQUENCE
 (SIZE (1..maxSNPN-ConfigID-r18)) OF SNPN-ConfigID-r18
SNPN-ConfigID-r18 ::= SEQUENCE {
 plmn-Identity-r18 PLMN-Identity,
 nid-IdentityList-r18 SEQUENCE (SIZE (1..maxNPN-r16)) OF NID-r16
}
-- TAG-AREACONFIGURATION-STOP
-- ASN1STOP

AreaConfiguration field descriptions
cag-IdentityList The cag-IdentityList contains one or more CAG IDs. All CAG IDs associated to the same PLMN ID are listed in the same cag-IdentityList entry.
InterFreqTargetInfo If configured, it indicates the neighbouring frequency and cells for which UE is requested to perform measurement logging. It can include sync raster or non-sync raster frequencies.
nid-IdentityList The nid-IdentityList contains one or more NID. All NIDs associated to the same PLMN ID are listed in the same nid-IdentityList entry.

– BT-NameList p. 1287

The IE BT-NameList is used to indicate the names of the Bluetooth beacon which the UE is configured to measure.

BT-NameList information element

-- ASN1START
-- TAG-BTNAMELIST-START
BT-NameList-r16 ::= SEQUENCE
 (SIZE (1..maxBT-Name-r16)) OF BT-Name-r16
BT-Name-r16 ::= OCTET STRING (SIZE (1..248))
-- TAG-BTNAMELIST-STOP
-- ASN1STOP

BT-NameList field descriptions
bt-Name If configured, the UE only performs Bluetooth measurements according to the names identified. For each name, it refers to LOCAL NAME defined in Bluetooth specification [51].

– DedicatedInfoF1c p. 1287

The IE DedicatedInfoF1c is used to transfer IAB-DU specific F1-C related information between the network and the IAB node. The carried information consists of F1AP message encapsulated in SCTP/IP or F1-C related (SCTP)/IP packet, see TS 38.472. The RRC layer is transparent for this information.

DedicatedInfoF1c information element

-- ASN1START
-- TAG-DEDICATEDINFOF1C-START
DedicatedInfoF1c-r17 ::= OCTET STRING
-- TAG-DEDICATEDINFOF1C-STOP
-- ASN1STOP

– EUTRA-AllowedMeasBandwidth p. 1288

The IE EUTRA-AllowedMeasBandwidth is used to indicate the maximum allowed measurement bandwidth on a carrier frequency as defined by the parameter Transmission Bandwidth Configuration "NRB" in TS 36.104. The values mbw6, mbw15, mbw25, mbw50, mbw75, mbw100 indicate 6, 15, 25, 50, 75 and 100 resource blocks, respectively.

EUTRA-AllowedMeasBandwidth information element

-- ASN1START
-- TAG-EUTRA-ALLOWEDMEASBANDWIDTH-START
EUTRA-AllowedMeasBandwidth ::=
 ENUMERATED {mbw6, mbw15, mbw25, mbw50, mbw75, mbw100}
-- TAG-EUTRA-ALLOWEDMEASBANDWIDTH-STOP
-- ASN1STOP

– EUTRA-MBSFN-SubframeConfigList p. 1288

The IE EUTRA-MBSFN-SubframeConfigList is used to define an E-UTRA MBSFN subframe pattern (for the purpose of NR rate matching).

EUTRA-MBSFN-SubframeConfigList information element

-- ASN1START
-- TAG-EUTRA-MBSFN-SUBFRAMECONFIGLIST-START
EUTRA-MBSFN-SubframeConfigList ::= SEQUENCE
 (SIZE (1..maxMBSFN-Allocations)) OF EUTRA-MBSFN-SubframeConfig
EUTRA-MBSFN-SubframeConfig ::= SEQUENCE {
 radioframeAllocationPeriod ENUMERATED {n1, n2, n4, n8, n16, n32},
 radioframeAllocationOffset INTEGER (0..7),
 subframeAllocation1 CHOICE {
  oneFrame BIT STRING (SIZE(6)),
  fourFrames BIT STRING (SIZE(24))
 },
 subframeAllocation2 CHOICE {
  oneFrame BIT STRING (SIZE(2)),
  fourFrames BIT STRING (SIZE(8))
 } OPTIONAL, -- Need R
 ...
}
-- TAG-EUTRA-MBSFN-SUBFRAMECONFIGLIST-STOP
-- ASN1STOP

EUTRA-MBSFN-SubframeConfig field descriptions
radioframeAllocationOffset Field as defined in MBSFN-SubframeConfig in TS 36.331.
radioframeAllocationPeriod Field as defined in MBSFN-SubframeConfig in TS 36.331, where SFN refers to the SFN of the NR serving cell.
subframeAllocation1 Field as defined in MBSFN-SubframeConfig in TS 36.331, where the UE assumes the duplex mode (FDD or TDD) of the NR cell for which the E-UTRA-MBSFN-SubframeConfig is provided.
subframeAllocation2 Field as defined in MBSFN-SubframeConfig-v1430 in TS 36.331, where the UE assumes the duplex mode (FDD or TDD) of the NR cell for which the E-UTRA-MBSFN-SubframeConfig is provided.

– EUTRA-MultiBandInfoList p. 1289

The IE EUTRA-MultiBandInfoList indicates the list of frequency bands in addition to the band represented by CarrierFreq for which cell reselection parameters are common, and a list of additionalPmax and additionalSpectrumEmission.

EUTRA-MultiBandInfoList information element

-- ASN1START
-- TAG-EUTRA-MULTIBANDINFOLIST-START
EUTRA-MultiBandInfoList ::= SEQUENCE
 (SIZE (1..maxMultiBands)) OF EUTRA-MultiBandInfo
EUTRA-MultiBandInfo ::= SEQUENCE {
 eutra-FreqBandIndicator FreqBandIndicatorEUTRA,
 eutra-NS-PmaxList EUTRA-NS-PmaxList OPTIONAL -- Need R
}
-- TAG-EUTRA-MULTIBANDINFOLIST-STOP
-- ASN1STOP

– EUTRA-MultiBandInfoListAerial p. 1289

The IE EUTRA-MultiBandInfoListAerial indicates the list of frequency bands for aerial UE in addition to the band represented by CarrierFreq for which cell reselection parameters are common, and a list of additionalPmax and additionalSpectrumEmission.

EUTRA-MultiBandInfoListAerial information element

-- ASN1START
-- TAG-EUTRA-MULTIBANDINFOLISTAERIAL-START
EUTRA-MultiBandInfoListAerial-r18 ::= SEQUENCE
 (SIZE (1..maxMultiBands)) OF EUTRA-MultiBandInfoAerial-r18
EUTRA-MultiBandInfoAerial-r18 ::= SEQUENCE {
 eutra-FreqBandIndicator-r18 FreqBandIndicatorEUTRA,
 eutra-NS-PmaxListAerial-r18 EUTRA-NS-PmaxList OPTIONAL -- Need R
}
-- TAG-EUTRA-MULTIBANDINFOLISTAERIAL-STOP
-- ASN1STOP

– EUTRA-NS-PmaxList p. 1290

The IE EUTRA-NS-PmaxList concerns a list of additionalPmax and additionalSpectrumEmission, as defined in TS 36.101, table 6.2.4-1 for UEs neither in CE nor BL UEs, TS 36.101, table 6.2.4E-1 for UEs in CE or BL UEs, and TS 36.101, table TBD for Aerial UEs,for a given frequency band.

EUTRA-NS-PmaxList information element

-- ASN1START
-- TAG-EUTRA-NS-PMAXLIST-START
EUTRA-NS-PmaxList ::= SEQUENCE
 (SIZE (1..maxEUTRA-NS-Pmax)) OF EUTRA-NS-PmaxValue
EUTRA-NS-PmaxValue ::= SEQUENCE {
 additionalPmax INTEGER (-30..33) OPTIONAL, -- Need R
 additionalSpectrumEmission INTEGER (1..288) OPTIONAL -- Need R
}
-- TAG-EUTRA-NS-PMAXLIST-STOP
-- ASN1STOP

– EUTRA-PhysCellId p. 1290

The IE EUTRA-PhysCellId is used to indicate the physical layer identity of the cell, as defined in TS 36.211.

EUTRA-PhysCellId information element

-- ASN1START
-- TAG-EUTRA-PHYSCELLID-START
EUTRA-PhysCellId ::= INTEGER (0..503)
-- TAG-EUTRA-PHYSCELLID-STOP
-- ASN1STOP

– EUTRA-PhysCellIdRange p. 1291

The IE EUTRA-PhysCellIdRange is used to encode either a single or a range of physical cell identities. The range is encoded by using a start value and by indicating the number of consecutive physical cell identities (including start) in the range. For fields comprising multiple occurrences of EUTRA-PhysCellIdRange, NW may configure overlapping ranges of physical cell identities.

EUTRA-PhysCellIdRange information element

-- ASN1START
-- TAG-EUTRA-PHYSCELLIDRANGE-START
EUTRA-PhysCellIdRange ::= SEQUENCE {
 start EUTRA-PhysCellId,
 range ENUMERATED {
  n4, n8, n12, n16, n24, n32, n48, n64, n84, n96,
  n128, n168, n252, n504, spare2, spare1
 } OPTIONAL -- Need N
}
-- TAG-EUTRA-PHYSCELLIDRANGE-STOP
-- ASN1STOP

– EUTRA-PresenceAntennaPort1 p. 1291

The IE EUTRA-PresenceAntennaPort1 is used to indicate whether all the neighbouring cells use Antenna Port 1. When set to true, the UE may assume that at least two cell-specific antenna ports are used in all neighbouring cells.

EUTRA-PresenceAntennaPort1 information element

-- ASN1START
-- TAG-EUTRA-PRESENCEANTENNAPORT1-START
EUTRA-PresenceAntennaPort1 ::= BOOLEAN
-- TAG-EUTRA-PRESENCEANTENNAPORT1-STOP
-- ASN1STOP

– EUTRA-Q-OffsetRange p. 1291

The IE EUTRA-Q-OffsetRange is used to indicate a cell, or frequency specific offset to be applied when evaluating triggering conditions for measurement reporting. The value in dB. Value dB-24 corresponds to -24 dB, value dB-22 corresponds to -22 dB and so on.

EUTRA-Q-OffsetRange information element

-- ASN1START
-- TAG-EUTRA-Q-OFFSETRANGE-START
EUTRA-Q-OffsetRange ::= ENUMERATED {
 dB-24, dB-22, dB-20, dB-18, dB-16, dB-14,
 dB-12, dB-10, dB-8, dB-6, dB-5, dB-4, dB-3,
 dB-2, dB-1, dB0, dB1, dB2, dB3, dB4, dB5,
 dB6, dB8, dB10, dB12, dB14, dB16, dB18,
 dB20, dB22, dB24
}
-- TAG-EUTRA-Q-OFFSETRANGE-STOP
-- ASN1STOP

– IAB-IP-Address p. 1292

The IE IAB-IP-Address is used to indicate the IP address/prefix.

IAB-IP-Address information element

-- ASN1START
-- TAG-IABIPADDRESS-START
IAB-IP-Address-r16 ::= CHOICE {
 iPv4-Address-r16 BIT STRING (SIZE(32)),
 iPv6-Address-r16 BIT STRING (SIZE(128)),
 iPv6-Prefix-r16 BIT STRING (SIZE(64)),
 ...
}
-- TAG-IABIPADDRESS-STOP
-- ASN1STOP

IAB-IP-Address field descriptions
iPv4-Address This field is used to provide the allocated IPv4 address.
iPv6-Address This field is used to provide the allocated IPv6 address.
iPv6-Prefix This field is used to provide the allocated IPv6 prefix.

– IAB-IP-AddressIndex p. 1292

The IE IAB-IP-AddressIndex is used to identify a configuration of an IP address.

IAB-IP-AddressIndex information element

-- ASN1START
-- TAG-IABIPADDRESSINDEX-START
IAB-IP-AddressIndex-r16 ::= INTEGER (1..maxIAB-IP-Address-r16)
-- TAG-IABIPADDRESSINDEX-STOP
-- ASN1STOP

– IAB-IP-Usage p. 1293

The IE IAB-IP-Usage is used to indicate the usage of the assigned IP address/prefix.

IAB-IP-Usage information element

-- ASN1START
-- TAG-IAB-IP-USAGE-START
IAB-IP-Usage-r16 ::= ENUMERATED {f1-C, f1-U, non-F1, spare}
-- TAG-IAB-IP-USAGE-STOP
-- ASN1STOP

– LoggingDuration p. 1293

The LoggingDuration indicates the duration for which UE is requested to perform measurement logging. Value min10 corresponds to 10 minutes, value min20 corresponds to 20 minutes and so on.

LoggingDuration information element

-- ASN1START
-- TAG-LOGGINGDURATION-START
LoggingDuration-r16 ::= ENUMERATED {
 min10, min20, min40, min60, min90, min120, spare2, spare1
}
-- TAG-LOGGINGDURATION-STOP
-- ASN1STOP

– LoggingInterval p. 1293

The LoggingInterval indicates the periodicity for logging measurement results. Value ms1280 corresponds to 1.28s, value ms2560 corresponds to 2.56s and so on. Value infinity means it is equal to the configured value of the LoggingDuration IE.

LoggingInterval information element

-- ASN1START
-- TAG-LOGGINGINTERVAL-START
LoggingInterval-r16 ::= ENUMERATED {
 ms320, ms640, ms1280, ms2560, ms5120, ms10240, ms20480,
 ms30720, ms40960, ms61440 , infinity
}
-- TAG-LOGGINGINTERVAL-STOP
-- ASN1STOP

– LogMeasResultListBT p. 1294

The IE LogMeasResultListBT covers measured results for Bluetooth.

LogMeasResultListBT information element

-- ASN1START
-- TAG-LOGMEASRESULTLISTBT-START
LogMeasResultListBT-r16 ::= SEQUENCE
 (SIZE (1..maxBT-IdReport-r16)) OF LogMeasResultBT-r16
LogMeasResultBT-r16 ::= SEQUENCE {
 bt-Addr-r16 BIT STRING (SIZE (48)),
 rssi-BT-r16 INTEGER (-128..127) OPTIONAL,
 ...
}
-- TAG-LOGMEASRESULTLISTBT-STOP
-- ASN1STOP

LogMeasResultListBT field descriptions
bt-Addr This field indicates the Bluetooth public address of the Bluetooth beacon as defined in TS 37.355.
rssi-BT This field provides the beacon received signal strength indicator (RSSI) in dBm as defined in TS 37.355.

– LogMeasResultListWLAN p. 1294

The IE LogMeasResultListWLAN covers measured results for WLAN.

LogMeasResultListWLAN information element

-- ASN1START
-- TAG-LOGMEASRESULTLISTWLAN-START
LogMeasResultListWLAN-r16 ::= SEQUENCE
 (SIZE (1..maxWLAN-Id-Report-r16)) OF LogMeasResultWLAN-r16
LogMeasResultWLAN-r16 ::= SEQUENCE {
 wlan-Identifiers-r16 WLAN-Identifiers-r16,
 rssiWLAN-r16 WLAN-RSSI-Range-r16 OPTIONAL,
 rtt-WLAN-r16 WLAN-RTT-r16 OPTIONAL,
 ...
}
WLAN-Identifiers-r16 ::= SEQUENCE {
 ssid-r16 OCTET STRING (SIZE (1..32)) OPTIONAL,
 bssid-r16 OCTET STRING (SIZE (6)) OPTIONAL,
 hessid-r16 OCTET STRING (SIZE (6)) OPTIONAL,
 ...
}
WLAN-RSSI-Range-r16 ::= INTEGER(0..141)
WLAN-RTT-r16 ::= SEQUENCE {
 rttValue-r16 INTEGER (0..16777215),
 rttUnits-r16 ENUMERATED {
  microseconds,
  hundredsofnanoseconds,
  tensofnanoseconds,
  nanoseconds,
  tenthsofnanoseconds,
  ...
 },
 rttAccuracy-r16 INTEGER (0..255) OPTIONAL,
 ...
}
-- TAG-LOGMEASRESULTLISTWLAN-STOP
-- ASN1STOP

LogMeasResultListWLAN field descriptions
Bssid Basic Service Set Identifier (BSSID) defined in IEEE 802.11-2012 [50].
Hessid Homogenous Extended Service Set Identifier (HESSID) defined in IEEE 802.11-2012 [50].
rssiWLAN Measured WLAN RSSI result in dBm. The IE WLAN-RSSI-Range specifies the value range used in WLAN RSSI measurements and thresholds. Integer value for WLAN RSSI measurements is according to mapping table in TS 36.133. Value 0 corresponds to -infinity, value 1 to -100dBm, value 2 to -99dBm, and so on (i.e. in steps of 1dBm) until value 140, which corresponds to 39dBm, while value 141 corresponds to +infinity.
rtt-WLAN This field provides the measured roundtrip time between the target device and WLAN AP and optionally the accuracy expressed as the standard deviation of the delay. Units for each of these are 1000ns, 100ns, 10ns, 1ns, and 0.1ns as defined in TS 37.355.
rttValue This field specifies the Round Trip Time (RTT) measurement between the target device and WLAN AP in units given by the field rttUnits as defined in TS 37.355.
rttUnits This field specifies the Units for the fields rttValue and rttAccuracy. The available Units are 1000ns, 100ns, 10ns, 1ns, and 0.1ns as defined in TS 37.355.
rttAccuracy This field provides the estimated accuracy of the provided rttValue expressed as the standard deviation in units given by the field rttUnits as defined in TS 37.355.
Ssid Service Set Identifier (SSID) defined in IEEE 802.11-2012 [50].
Wlan-Identifiers Indicates the WLAN parameters used for identification of the WLAN for which the measurement results are applicable.

– MeasConfigAppLayerId p. 1296

The IE MeasConfigAppLayerId identifies the application layer measurement.

MeasConfigAppLayerId information element

-- ASN1START
-- TAG-MEASCONFIGAPPLAYERID-START
MeasConfigAppLayerId-r17 ::=
 INTEGER (0..maxNrofAppLayerMeas-1-r17)
-- TAG-MEASCONFIGAPPLAYERID-STOP
-- ASN1STOP

– OtherConfig p. 1296

The IE OtherConfig contains configuration related to miscellaneous other configurations.

OtherConfig information element

-- ASN1START
-- TAG-OTHERCONFIG-START
OtherConfig ::= SEQUENCE {
 delayBudgetReportingConfig CHOICE {
  release NULL,
  setup SEQUENCE{
   delayBudgetReportingProhibitTimer
    ENUMERATED {s0, s0dot4, s0dot8, s1dot6, s3, s6, s12, s30}
  }
 } OPTIONAL -- Need M
}
OtherConfig-v1540 ::= SEQUENCE {
 overheatingAssistanceConfig
  SetupRelease {OverheatingAssistanceConfig} OPTIONAL, -- Need M
 ...
}
OtherConfig-v1610 ::= SEQUENCE {
 idc-AssistanceConfig-r16
  SetupRelease {IDC-AssistanceConfig-r16} OPTIONAL, -- Need M
 drx-PreferenceConfig-r16
  SetupRelease {DRX-PreferenceConfig-r16} OPTIONAL, -- Need M
 maxBW-PreferenceConfig-r16
  SetupRelease {MaxBW-PreferenceConfig-r16} OPTIONAL, -- Need M
 maxCC-PreferenceConfig-r16
  SetupRelease {MaxCC-PreferenceConfig-r16} OPTIONAL, -- Need M
 maxMIMO-LayerPreferenceConfig-r16
  SetupRelease {MaxMIMO-LayerPreferenceConfig-r16}
  OPTIONAL, -- Need M
 minSchedulingOffsetPreferenceConfig-r16
  SetupRelease {MinSchedulingOffsetPreferenceConfig-r16}
  OPTIONAL, -- Need M
 releasePreferenceConfig-r16
  SetupRelease {ReleasePreferenceConfig-r16} OPTIONAL, -- Need M
 referenceTimePreferenceReporting-r16
  ENUMERATED {true} OPTIONAL, -- Need R
 btNameList-r16
  SetupRelease {BT-NameList-r16} OPTIONAL, -- Need M
 wlanNameList-r16
  SetupRelease {WLAN-NameList-r16} OPTIONAL, -- Need M
 sensorNameList-r16
  SetupRelease {Sensor-NameList-r16} OPTIONAL, -- Need M
 obtainCommonLocation-r16 ENUMERATED {true} OPTIONAL, -- Need R
 sl-AssistanceConfigNR-r16 ENUMERATED{true} OPTIONAL -- Need R
}
OtherConfig-v1700 ::= SEQUENCE {
 ul-GapFR2-PreferenceConfig-r17
  ENUMERATED {true} OPTIONAL, -- Need R
 musim-GapAssistanceConfig-r17
  SetupRelease {MUSIM-GapAssistanceConfig-r17}
  OPTIONAL, -- Need M
 musim-LeaveAssistanceConfig-r17
  SetupRelease {MUSIM-LeaveAssistanceConfig-r17}
  OPTIONAL, -- Need M
 successHO-Config-r17
  SetupRelease {SuccessHO-Config-r17} OPTIONAL, -- Need M
 maxBW-PreferenceConfigFR2-2-r17
  ENUMERATED {true} OPTIONAL, -- Cond maxBW
 maxMIMO-LayerPreferenceConfigFR2-2-r17
  ENUMERATED {true} OPTIONAL, -- Cond maxMIMO
 minSchedulingOffsetPreferenceConfigExt-r17
  ENUMERATED {true} OPTIONAL, -- Cond minOffset
 rlm-RelaxationReportingConfig-r17
  SetupRelease {RLM-RelaxationReportingConfig-r17}
  OPTIONAL, -- Need M
 bfd-RelaxationReportingConfig-r17
  SetupRelease {BFD-RelaxationReportingConfig-r17}
  OPTIONAL, -- Need M
 scg-DeactivationPreferenceConfig-r17
  SetupRelease {SCG-DeactivationPreferenceConfig-r17}
  OPTIONAL, -- Cond SCG
 rrm-MeasRelaxationReportingConfig-r17
  SetupRelease {RRM-MeasRelaxationReportingConfig-r17}
  OPTIONAL, -- Need M
 propDelayDiffReportConfig-r17
  SetupRelease {PropDelayDiffReportConfig-r17} OPTIONAL -- Need M
}
OtherConfig-v1800 ::= SEQUENCE {
 idc-AssistanceConfig-v1800
  SetupRelease {IDC-AssistanceConfig-v1800} OPTIONAL, -- Need M
 multiRx-PreferenceReportingConfigFR2-r18
  SetupRelease {MultiRx-PreferenceReportingConfigFR2-r18}
  OPTIONAL, -- Need M
 uav-FlightPathAvailabilityConfig-r18
  ENUMERATED {true} OPTIONAL, -- Need R
 ul-TrafficInfoReportingConfig-r18
  SetupRelease {UL-TrafficInfoReportingConfig-r18} OPTIONAL, -- Need M
 n3c-RelayUE-InfoReportConfig-r18 ENUMERATED {true} OPTIONAL, -- Need R
 successPSCell-Config-r18
  SetupRelease {SuccessPSCell-Config-r18} OPTIONAL, -- Need M
 sn-InitiatedPSCellChange-r18 ENUMERATED {true} OPTIONAL, --Need M
 musim-GapPriorityAssistanceConfig-r18
  ENUMERATED {true} OPTIONAL, -- Cond musimGapConfig
 musim-CapabilityRestrictionConfig-r18
  SetupRelease {MUSIM-CapabilityRestrictionConfig-r18}
  OPTIONAL -- Need M
}
IDC-AssistanceConfig-v1800 ::= SEQUENCE {
 idc-FDM-AssistanceConfig-r18
  SetupRelease {IDC-FDM-AssistanceConfig-r18} OPTIONAL, -- Need M
 idc-TDM-AssistanceConfig-r18 ENUMERATED {setup} OPTIONAL -- Cond FDM
}
MultiRx-PreferenceReportingConfigFR2-r18 ::= SEQUENCE {
 multiRx-PreferenceReportingConfigFR2ProhibitTimer-r18 ENUMERATED {
 s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
 s8, s9, s10, s20, s30, spare2, spare1}
}
CandidateServingFreqListNR-r16 ::= SEQUENCE
 (SIZE (1..maxFreqIDC-r16)) OF ARFCN-ValueNR
MUSIM-GapAssistanceConfig-r17 ::= SEQUENCE {
 musim-GapProhibitTimer-r17 ENUMERATED {
  s0, s0dot1, s0dot2, s0dot3, s0dot4, s0dot5,
  s1, s2, s3, s4, s5, s6, s7, s8, s9, s10
 }
}
MUSIM-LeaveAssistanceConfig-r17 ::= SEQUENCE {
 musim-LeaveWithoutResponseTimer-r17 ENUMERATED {
  ms10, ms20, ms40, ms60, ms80, ms100, spare2, spare1
 }
}
MUSIM-CapabilityRestrictionConfig-r18 ::= SEQUENCE {
 musim-CandidateBandList-r18
  MUSIM-CandidateBandList-r18 OPTIONAL, -- Need M
 musim-WaitTimer-r18
  ENUMERATED {ms10, ms20, ms40, ms60, ms80, ms100, spare2, spare1},
 musim-ProhibitTimer-r18
  ENUMERATED {ms0, ms10, ms20, ms40, ms60, ms80, spare2, spare1}
}
MUSIM-CandidateBandList-r18::= SEQUENCE
 (SIZE (1..maxCandidateBandIndex-r18)) OF FreqBandIndicatorNR
SuccessHO-Config-r17 ::= SEQUENCE {
 thresholdPercentageT304-r17 ENUMERATED {
  p40, p60, p80, spare5, spare4, spare3, spare2, spare1
 } OPTIONAL, -- Need R
 thresholdPercentageT310-r17 ENUMERATED {
  p40, p60, p80, spare5, spare4, spare3, spare2, spare1
 } OPTIONAL, -- Need R
 thresholdPercentageT312-r17 ENUMERATED {
  p20, p40, p60, p80, spare4, spare3, spare2, spare1
 } OPTIONAL, -- Need R
 sourceDAPS-FailureReporting-r17
  ENUMERATED {true} OPTIONAL, -- Need R
 ...
}
SuccessPSCell-Config-r18 ::= SEQUENCE {
 thresholdPercentageT304-SCG-r18
  ENUMERATED {p40, p60, p80, spare5, spare4, spare3, spare2, spare1}
  OPTIONAL, --Need R
 thresholdPercentageT310-SCG-r18
  ENUMERATED {p40, p60, p80, spare5, spare4, spare3, spare2, spare1}
  OPTIONAL, --Need R
 thresholdPercentageT312-SCG-r18
  ENUMERATED {p20, p40, p60, p80, spare4, spare3, spare2, spare1}
  OPTIONAL, --Need R
 ...
}
OverheatingAssistanceConfig ::= SEQUENCE {
 overheatingIndicationProhibitTimer ENUMERATED {
  s0, s0dot5, s1, s2, s5, s10, s20, s30,
  s60, s90, s120, s300, s600, spare3, spare2, spare1
 }
}
IDC-AssistanceConfig-r16 ::= SEQUENCE {
 candidateServingFreqListNR-r16
  CandidateServingFreqListNR-r16 OPTIONAL, -- Need R
 ...
}
DRX-PreferenceConfig-r16 ::= SEQUENCE {
 drx-PreferenceProhibitTimer-r16 ENUMERATED {
  s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
  s8, s9, s10, s20, s30, spare2, spare1
 }
}
MaxBW-PreferenceConfig-r16 ::= SEQUENCE {
 maxBW-PreferenceProhibitTimer-r16 ENUMERATED {
  s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
  s8, s9, s10, s20, s30, spare2, spare1
 }
}
MaxCC-PreferenceConfig-r16 ::= SEQUENCE {
 maxCC-PreferenceProhibitTimer-r16 ENUMERATED {
  s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
  s8, s9, s10, s20, s30, spare2, spare1
 }
}
MaxMIMO-LayerPreferenceConfig-r16 ::= SEQUENCE {
 maxMIMO-LayerPreferenceProhibitTimer-r16 ENUMERATED {
  s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
  s8, s9, s10, s20, s30, spare2, spare1
 }
}
MinSchedulingOffsetPreferenceConfig-r16 ::= SEQUENCE {
 minSchedulingOffsetPreferenceProhibitTimer-r16 ENUMERATED {
  s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
  s8, s9, s10, s20, s30, spare2, spare1
 }
}
ReleasePreferenceConfig-r16 ::= SEQUENCE {
 releasePreferenceProhibitTimer-r16 ENUMERATED {
  s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
  s8, s9, s10, s20, s30, infinity, spare1
 },
 connectedReporting ENUMERATED {true} OPTIONAL -- Need R
}
RLM-RelaxationReportingConfig-r17 ::= SEQUENCE {
 rlm-RelaxtionReportingProhibitTimer ENUMERATED {
  s0, s0dot5, s1, s2, s5, s10, s20, s30,
  s60, s90, s120, s300, s600, infinity, spare2, spare1
 }
}
BFD-RelaxationReportingConfig-r17 ::= SEQUENCE {
 bfd-RelaxtionReportingProhibitTimer ENUMERATED {
  s0, s0dot5, s1, s2, s5, s10, s20, s30,
  s60, s90, s120, s300, s600, infinity, spare2, spare1
 }
}
SCG-DeactivationPreferenceConfig-r17 ::= SEQUENCE {
 scg-DeactivationPreferenceProhibitTimer-r17 ENUMERATED {
  s0, s1, s2, s4, s8, s10, s15, s30,
  s60, s120, s180, s240, s300, s600, s900, s1800
 }
}
RRM-MeasRelaxationReportingConfig-r17 ::= SEQUENCE {
 s-SearchDeltaP-Stationary-r17 ENUMERATED {
  dB2, dB3, dB6, dB9, dB12, dB15, spare2, spare1
 },
 t-SearchDeltaP-Stationary-r17 ENUMERATED {
  s5, s10, s20, s30, s60, s120, s180, s240, s300, spare7,
  spare6, spare5, spare4, spare3, spare2, spare1
 }
}
PropDelayDiffReportConfig-r17 ::= SEQUENCE {
 threshPropDelayDiff-r17 ENUMERATED {
  ms0dot5, ms1, ms2, ms3, ms4, ms5, ms6 ,ms7, ms8, ms9, ms10,
  spare5, spare4, spare3, spare2, spare1
 } OPTIONAL, -- Need M
 neighCellInfoList-r17 SEQUENCE
  (SIZE (1..maxCellNTN-r17)) OF NeighbourCellInfo-r17
  OPTIONAL -- Need M
}
NeighbourCellInfo-r17 ::= SEQUENCE {
 epochTime-r17 EpochTime-r17,
 ephemerisInfo-r17 EphemerisInfo-r17
}
IDC-FDM-AssistanceConfig-r18 ::= SEQUENCE {
 candidateServingFreqRangeListNR-r18
  CandidateServingFreqRangeListNR-r18 OPTIONAL, -- Need R
 ...
}
CandidateServingFreqRangeListNR-r18 ::= SEQUENCE
 (SIZE (1..maxFreqIDC-r16)) OF CandidateServingFreqRangeNR-r18
CandidateServingFreqRangeNR-r18 ::= SEQUENCE {
 candidateCenterFreq-r18 ARFCN-ValueNR,
 candidateBandwidth-r18 ENUMERATED {
  khz200, khz400, khz600, khz800, mhz1, mhz2, mhz3, mhz4, mhz5,
  mhz6, mhz8, mhz10, mhz20, mhz30, mhz40, mhz50, mhz60, mhz80, mhz100,
  mhz200, mhz300, mhz400
 } OPTIONAL -- Need R
}
UL-TrafficInfoReportingConfig-r18 ::= SEQUENCE {
 pdu-SessionsToReportUL-TrafficInfoList-r18 SEQUENCE
  (SIZE (1.. maxNrofPDU-Sessions-r17)) OF
  PDU-SessionToReportUL-TrafficInfo-r18,
 ul-TrafficInfoProhibitTimer-r18 ENUMERATED {
  s0, s0dot5, s1, s2, s5, s10, s20, s30,
  s60, s90, s120, s300, s600, spare3, spare2, spare1
 }
}
PDU-SessionToReportUL-TrafficInfo-r18 ::= SEQUENCE {
 pdu-SessionID PDU-SessionID,
 qfi-ToReportUL-TrafficInfoList-r18 SEQUENCE
  (SIZE (1..maxNrofQFIs)) OF QFI
}
-- TAG-OTHERCONFIG-STOP
-- ASN1STOP

OtherConfig field descriptions
bfd-RelaxationReportingConfig Configuration for the UE to report the relaxation state of BFD measurements.
btNameList Configuration for the UE to report measurements from specific Bluetooth beacons. NG-RAN configures the field if includeBT-Meas is configured for one or more measurements.
candidateBandwidth Indicates the bandwidth of the candidate frequency range around the center frequency.
candidateCenterFreq Indicates the center frequency of the candidate frequency range.
candidateServingFreqListNR Indicates for each candidate NR serving cells, the center frequency around which UE is requested to report IDC issues.
candidateServingFreqRangeListNR Indicates the candidate frequency range with the combination of the center frequency and the candidate bandwidth, around which the UE is requested to report IDC issues.
connectedReporting Indicates that the UE can report a preference to remain in RRC_CONNECTED state following a report to leave RRC_CONNECTED state. If absent, the UE cannot report a preference to stay in RRC_CONNECTED state.
delayBudgetReportingProhibitTimer Prohibit timer for delay budget reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot4 means prohibit timer is set to 0.4 seconds, and so on.
drx-PreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE's DRX preferences for power saving.
drx-PreferenceProhibitTimer Prohibit timer for DRX preferences assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
idc-AssistanceConfig Configuration for the UE to report assistance information to inform the gNB about UE detected IDC problem.
maxBW-PreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE's preferred bandwidth for power saving.
maxBW-PreferenceProhibitTimer Prohibit timer for preferred bandwidth assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
maxCC-PreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE's preferred number of carriers for power saving.
maxBW-PreferenceConfigFR2-2 Configuration for the UE to report assistance information to inform the gNB about the UE's preferred bandwidth for power saving for FR2-2.
maxCC-PreferenceProhibitTimer Prohibit timer for preferred number of carriers assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
maxMIMO-LayerPreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE's preferred number of MIMO layers for power saving.
maxMIMO-LayerPreferenceConfigFR2-2 Configuration for the UE to report assistance information to inform the gNB about the UE's preferred number of MIMO layers for power saving for FR2-2.
maxMIMO-LayerPreferenceProhibitTimer Prohibit timer for preferred number of number of MIMO layers assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
minSchedulingOffsetPreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE's preferred minimumSchedulingOffset value for cross-slot scheduling for power saving.
minSchedulingOffsetPreferenceConfigExt Configuration for the UE to report assistance information to inform the gNB about the UE's preferred minimumSchedulingOffset value for cross-slot scheduling for power saving for SCS 480 kHz and/or 960 kHz.
minSchedulingOffsetPreferenceProhibitTimer Prohibit timer for preferred minimumSchedulingOffset assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
multiRx-PreferenceReportingConfigFR2 Configuration for the UE to report assistant information to inform gNB about the UE's preference on multi-Rx operation for FR2.
multiRx-PreferenceReportingConfigFR2ProhibitTimer Prohibit timer for multi-Rx operation for FR2 reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
musim-CandidateBandList A list of bands for which the UE is requested to provide information on temporary restricted capabilities for MUSIM operation.
musim-GapAssistanceConfig Configuration for the UE to report assistance information for gap preference.
musim-GapPriorityAssistanceConfig Indicates the UE is allowed to provide MUSIM assistance information for gap(s) priority or MUSIM gaps keep preference.
musim-GapProhibitTimer Prohibit timer for MUSIM assistance information reporting for gap preference.
musim-LeaveAssistanceConfig Configuration for the UE to report assistance information for leaving RRC_CONNECTED for MUSIM purpose.
musim-LeaveWithoutResponseTimer Indicates the timer for the UE to enter RRC_IDLE for MUSIM purpose as defined in clause 5.3.8.6.
musim-ProhibitTimer Indicates the prohibit timer for UE temporary restricted capabilities for MUSIM operation. Value in milliseconds. Value ms0 means prohibit timer is set to 0 milliseconds, value ms10 means prohibit timer is set to 10 milliseconds and so on.
musim-WaitTimer Indicates the wait timer for UE temporary restricted capabilities for MUSIM operation. Value in milliseconds. Value ms10 means wait timer is set to 10 milliseconds, value ms20 means wait timer is set to 20 milliseconds and so on.
obtainCommonLocation Requests the UE to attempt to have detailed location information available using GNSS. NR configures the field if includeCommonLocationInfo is configured for one or more measurements.
overheatingAssistanceConfig Configuration for the UE to report assistance information to inform the gNB about UE detected internal overheating.
overheatingIndicationProhibitTimer Prohibit timer for overheating assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
pdu-SessionsToReportUL-TrafficInfoList A list of PDU sessions for which the UE shall report UL traffic information.
propDelayDiffReportConfig Configuration for the UE to report service link propagation delay difference between serving cell and neighbour cell(s).
qfi-ToReportUL-TrafficInfoList A list of QFIs of a PDU session for which the UE shall report UL traffic information.
referenceTimePreferenceReporting If present, the field indicates the UE is configured to provide reference time assistance information.
releasePreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE's preference to leave RRC_CONNECTED state.
rlm-RelaxationReportingConfig Configuration for the UE to report the relaxation state of RLM measurements.
releasePreferenceProhibitTimer Prohibit timer for release preference assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. Value infinity means that once a UE has reported a release preference, the UE cannot report a release preference again during the RRC connection.
s-SearchDeltaP-Stationary Parameter "SSearchDeltaP-StationaryConnected" in clause 5.7.4.4. Value dB2 corresponds to 2 dB, dB3 corresponds to 3 dB and so on.
scg-DeactivationPreferenceConfig Configuration of the UE to indicate its preference for SCG deactivation.
scg -StatePreferenceProhibitTimer Prohibit timer for UE indication of its preference for SCG deactivation. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s1 means prohibit timer is set to 1 second and so on.
sensorNameList Configuration for the UE to report measurements from specific sensors. NG-RAN configures the field if includeSensor-Meas is configured for one or more measurements.
sl-AssistanceConfigNR Indicate whether UE is configured to provide configured grant assistance information for NR sidelink communication.
sn-InitiatedPSCellChange This field indicates whether the PSCell change procedure included in the RRCReconfiguration message is SN initiated or not.
sourceDAPS-FailureReporting This field indicates whether the UE shall generate the SHR upon successfully completing the DAPS handover to the target cell and if a radio link failure was experienced in the source PCell while executing the DAPS handover. This field is set in the otherConfig configured by the source cell of the DAPS handover.
successHO-Config Configuration for the UE to report the successful handover information to the network.
successPSCell-Config Configuration for the UE to report the successful PSCell change or addition information to the network.
t-SearchDeltaP-Stationary Parameter "TSearchDeltaP-StationaryConnected" in clause 5.7.4.4. Value in seconds. Value s5 means 5 seconds, value s10 means 10 seconds and so on.
thresholdPercentageT304 This field indicates the threshold for the ratio in percentage between the elapsed T304 timer and the configured value of the T304 timer. Value p40 corresponds to 40%, value p60 corresponds to 60% and so on. This field is set in the otherConfig configured by the target cell of the handover.
thresholdPercentageT310 This field indicates the threshold for the ratio in percentage between the elapsed T310 timer and the configured value of the T310 timer. Value p40 corresponds to 40%, value p60 corresponds to 60% and so on. This field is set in the otherConfig configured by the source cell of the handover.
thresholdPercentageT312 This field indicates the threshold for the ratio in percentage between the elapsed T312 timer and the configured value(s) of the T312 timer. Value p20 corresponds to 20%, value p40 corresponds to 40% and so on. This field is set in the otherConfig configured by the source cell of the handover.
thresholdPercentageT304-SCG This field indicates the threshold for the ratio in percentage between the elapsed T304 timer associated to the target PSCell and the configured value of the T304 timer. Value p40 corresponds to 40%, value p60 corresponds to 60% and so on. This field is set in the otherConfig configured by the target PSCell of the PSCell change or addition.
thresholdPercentageT310-SCG This field indicates the threshold for the ratio in percentage between the elapsed T310 timer associated to the source PSCell and the configured value of the T310 timer. Value p40 corresponds to 40%, value p60 corresponds to 60% and so on. This field is set in the otherConfig configured by the source PSCell of the PSCell change, or in the otherConfig configured by the PCell for the PSCell change.
thresholdPercentageT312-SCG This field indicates the threshold for the ratio in percentage between the elapsed T312 timer associated to the measurement identity of the target PSCell and the configured value of the T312 timer. Value p20 corresponds to 20%, value p40 corresponds to 40% and so on. This field is set in the otherConfig configured by the source PSCell of the PSCell change, or in the otherConfig configured by the PCell for the PSCell change.
threshPropDelayDiff Threshold for one-way service link propagation delay difference report as specified in clause 5.7.4.2.
uav-FlightPathAvailabilityConfig Configuration for the UE to indicate the availability of flight path information for Aerial UE operation.
ul-GapFR2-PreferenceConfig Indicates whether UE is configured to request for FR2 UL gap activation/deactivation and preferred FR2 UL gap pattern.
wlanNameList Configuration for the UE to report measurements from specific WLAN APs. NG-RAN configures the field if includeWLAN-Meas is configured for one or more measurements.
ul-TrafficInfoProhibitTimer Prohibit timer for UL traffic information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on.
ul-TrafficInfoReportingConfig Configuration for the UE to report UL traffic information.

NeighbourCellInfo field descriptions
epochTime Indicates the epoch time used along with the ephemerisInfo to derive the propagation delay difference for the associated neighbour cell. The UE considers epoch time, indicated by the SFN and sub-frame number in this field, to be the frame nearest to the frame in which the message indicating the epoch time is received. This field is used based on the timing of the serving cell, i.e. the SFN and sub-frame number indicated in this field refers to the SFN and sub-frame of the serving cell.

NeighbourCellInfo field descriptions

epochTime

Indicates the epoch time used along with the ephemerisInfo to derive the propagation delay difference for the associated neighbour cell. The UE considers epoch time, indicated by the SFN and sub-frame number in this field, to be the frame nearest to the frame in which the message indicating the epoch time is received. This field is used based on the timing of the serving cell, i.e. the SFN and sub-frame number indicated in this field refers to the SFN and sub-frame of the serving cell.

Conditional Presence	Explanation
FDM	This field is optionally present, need M, if idc-AssistanceConfig-r16 or idc-FDM-AssistanceConfig is setup. Otherwise, it is absent, need R.
maxBW	This field is optionally present, need R, if maxBW-PreferenceConfig-r16 is setup; otherwise it is absent, need R.
maxMIMO	This field is optionally present, need R, if maxMIMO-LayerPreferenceConfig-r16 is setup; otherwise it is absent, need R.
minOffset	This field is optionally present, need R, if minSchedulingOffsetPreferenceConfig-r16 is setup; otherwise it is absent, need R.
musimGapConfig	This field is optionally present, need R, if musim-GapAssistanceConfig-r17 is configured; otherwise it is absent, need R.
SCG	This field is optionally present, need M, in an RRCReconfiguration message not within mrdc-SecondaryCellGroup and received, either via SRB3 within DLInformationTransferMRDC or via SRB1. Otherwise, it is absent.

– PhysCellIdUTRA-FDD p. 1305

The IE PhysCellIdUTRA-FDD is used to indicate the physical layer identity of the cell, i.e. the primary scrambling code, as defined in TS 25.331.

PhysCellIdUTRA-FDD information element

-- ASN1START
-- TAG-PHYSCELLIDUTRA-FDD-START
PhysCellIdUTRA-FDD-r16 ::= INTEGER (0..511)
-- TAG-PHYSCELLIDUTRA-FDD-STOP
-- ASN1STOP

– RRC-TransactionIdentifier p. 1306

The IE RRC-TransactionIdentifier is used, together with the message type, for the identification of an RRC procedure (transaction).

RRC-TransactionIdentifier information element

-- ASN1START
-- TAG-RRC-TRANSACTIONIDENTIFIER-START
RRC-TransactionIdentifier ::= INTEGER (0..3)
-- TAG-RRC-TRANSACTIONIDENTIFIER-STOP
-- ASN1STOP

– Sensor-NameList p. 1306

The IE Sensor-NameList is used to indicate the names of the sensors which the UE is configured to measure.

Sensor-NameList information element

-- ASN1START
-- TAG-SENSORNAMELIST-START
Sensor-NameList-r16 ::= SEQUENCE {
 measUncomBarPre-r16 ENUMERATED {true} OPTIONAL, -- Need R
 measUeSpeed ENUMERATED {true} OPTIONAL, -- Need R
 measUeOrientation ENUMERATED {true} OPTIONAL -- Need R
}
-- TAG-SENSORNAMELIST-STOP
-- ASN1STOP

Sensor-NameList field descriptions
measUncomBarPre If configured, the UE reports the uncompensated Barometric pressure measurement as defined in TS 37.355.
measUeSpeed If configured, the UE reports the UE speed measurement as defined in TS 37.355.
measUeOrientation If configured, the UE reports the UE orientation information as defined in TS 37.355.

– TraceReference p. 1307

The TraceReference contains parameter Trace Reference as defined in TS 32.422.

TraceReference information element

-- ASN1START
-- TAG-TRACEREFERENCE-START
TraceReference-r16 ::= SEQUENCE {
 plmn-Identity-r16 PLMN-Identity,
 traceId-r16 OCTET STRING (SIZE (3))
}
-- TAG-TRACEREFERENCE-STOP
-- ASN1STOP

– UE-MeasurementsAvailable p. 1307

The IE UE-MeasurementsAvailable is used to indicate all relevant available indicators for UE measurements.

UE-MeasurementsAvailable information element

-- ASN1START
-- TAG-UE-MeasurementsAvailable-START
UE-MeasurementsAvailable-r16 ::= SEQUENCE {
 logMeasAvailable-r16 ENUMERATED {true} OPTIONAL,
 logMeasAvailableBT-r16 ENUMERATED {true} OPTIONAL,
 logMeasAvailableWLAN-r16 ENUMERATED {true} OPTIONAL,
 connEstFailInfoAvailable-r16 ENUMERATED {true} OPTIONAL,
 rlf-InfoAvailable-r16 ENUMERATED {true} OPTIONAL,
 ...,
 [[
 successHO-InfoAvailable-r17 ENUMERATED {true} OPTIONAL,
 sigLogMeasConfigAvailable-r17 BOOLEAN OPTIONAL
 ]],
 [[
 successPSCell-InfoAvailable-r18 ENUMERATED {true} OPTIONAL
 ]]
}
-- TAG-UE-MeasurementsAvailable-STOP
-- ASN1STOP

– UTRA-FDD-Q-OffsetRange p. 1308

The IE UTRA-FDD-Q-OffsetRange is used to indicate a frequency specific offset to be applied when evaluating triggering conditions for measurement reporting. The value is in dB. Value dB-24 corresponds to -24 dB, value dB-22 corresponds to -22 dB and so on.

UTRA-FDD-Q-OffsetRange information element

-- ASN1START
-- TAG-UTRA-FDD-Q-OFFSETRANGE-START
UTRA-FDD-Q-OffsetRange-r16 ::= ENUMERATED {
 dB-24, dB-22, dB-20, dB-18, dB-16, dB-14,
 dB-12, dB-10, dB-8, dB-6, dB-5, dB-4, dB-3,
 dB-2, dB-1, dB0, dB1, dB2, dB3, dB4, dB5,
 dB6, dB8, dB10, dB12, dB14, dB16, dB18,
 dB20, dB22, dB24
}
-- TAG-UTRA-FDD-Q-OFFSETRANGE-STOP
-- ASN1STOP

– VisitedCellInfoList p. 1308

The IE VisitedCellInfoList includes the mobility history information of maximum of 16 most recently visited primary cells or time spent in any cell selection state and/or camped on any cell state in NR or E-UTRA and, in case of Dual Connectivity, the mobility history information of maxPSCellHistory most recently visited primary secondary cell group cells across all the primary cells included in the VisitedCellInfoList. The most recently visited cell is stored first in the list. The list includes cells visited in RRC_IDLE, RRC_INACTIVE and RRC_CONNECTED states for NR and RRC_IDLE and RRC_CONNECTED for E-UTRA.

VisitedCellInfoList information element

-- ASN1START
-- TAG-VISITEDCELLINFOLIST-START
VisitedCellInfoList-r16 ::= SEQUENCE
 (SIZE (1..maxCellHistory-r16)) OF VisitedCellInfo-r16
VisitedCellInfo-r16 ::= SEQUENCE {
 visitedCellId-r16 CHOICE {
  nr-CellId-r16 CHOICE {
   cgi-Info CGI-Info-Logging-r16,
   pci-arfcn-r16 PCI-ARFCN-NR-r16
  },
  eutra-CellId-r16 CHOICE {
   cellGlobalId-r16 CGI-InfoEUTRA,
   pci-arfcn-r16 PCI-ARFCN-EUTRA-r16
  }
 } OPTIONAL,
 timeSpent-r16 INTEGER (0..4095),
 ...,
 [[
 visitedPSCellInfoListReport-r17
  VisitedPSCellInfoList-r17 OPTIONAL
 ]]
}
VisitedPSCellInfoList-r17 ::= SEQUENCE
 (SIZE (1..maxPSCellHistory-r17)) OF VisitedPSCellInfo-r17
VisitedPSCellInfo-r17 ::= SEQUENCE {
 visitedCellId-r17 CHOICE {
  nr-CellId-r17 CHOICE {
   cgi-Info-r17 CGI-Info-Logging-r16,
   pci-arfcn-r17 PCI-ARFCN-NR-r16
  },
  eutra-CellId-r17 CHOICE {
   cellGlobalId-r17 CGI-InfoEUTRALogging,
   pci-arfcn-r17 PCI-ARFCN-EUTRA-r16
  }
 } OPTIONAL,
 timeSpent-r17 INTEGER (0..4095),
 ...
}
-- TAG-VISITEDCELLINFOLIST-STOP
-- ASN1STOP

VisitedCellInfoList field descriptions
timeSpent This field indicates the duration of stay in the cell or in any cell selection state and/or camped on any cell state in NR or E-UTRA approximated to the closest second. If included in VisitedPSCellInfo, it indicates the duration of stay in the PSCell or without any PSCell. If the duration of stay exceeds 4095s, the UE shall set it to 4095s.
visitedCellId This field indicates the visited cell id including NR and E-UTRA cells.

– WLAN-NameList p. 1309

The IE WLAN-NameList is used to indicate the names of the WLAN AP for which the UE is configured to measure.

WLAN-NameList information element

-- ASN1START
-- TAG-WLANNAMELIST-START
WLAN-NameList-r16 ::= SEQUENCE
 (SIZE (1..maxWLAN-Name-r16)) OF WLAN-Name-r16
WLAN-Name-r16 ::= OCTET STRING (SIZE (1..32))
-- TAG-WLANNAMELIST-STOP
-- ASN1STOP

WLAN-NameList field descriptions
WLAN-Name If configured, the UE only performs WLAN measurements according to the names identified. For each name, it refers to Service Set Identifier (SSID) defined in IEEE 802.11-2012 [50].