Tech-invite3GPPspaceIETFspace
21222324252627282931323334353637384‑5x

Content for  TS 24.501  Word version:  18.5.0

Top   Top   Up   Prev   Next
1…   3…   4…   4.4…   4.4.3…   4.5…   4.5.3…   4.6…   4.7…   4.9…   4.15…   5…   5.2…   5.3…   5.3.2…   5.3.7…   5.3.19…   5.4…   5.4.1.3…   5.4.2…   5.4.4…   5.4.5…   5.4.6…   5.5…   5.5.1.2.4   5.5.1.2.5…   5.5.1.3…   5.5.1.3.4   5.5.1.3.5…   5.5.2…   5.6…   5.6.2…   6…   6.1.4…   6.2…   6.3…   6.3.2…   6.3.3…   6.4…   6.4.1.4…   6.4.2…   6.5…   7…   8…   8.2.9…   8.3…   9…   9.11.2…   9.11.2.10…   9.11.3…   9.11.3.4…   9.11.3.8…   9.11.3.14…   9.11.3.18C…   9.11.3.29…   9.11.3.33…   9.11.3.39…   9.11.3.45…   9.11.3.50…   9.11.3.53A…   9.11.3.68…   9.11.3.75…   9.11.4…   9.11.4.10…   9.11.4.13…   9.11.4.16…   9.11.4.30…   9.12   10…   A…   B…   C…   D…   D.6…   D.6.3…   D.6.8   D.7…

 

D.6  Information elements codingp. 1093

D.6.1  UE policy delivery service message typep. 1093

Bits
8 7 6 5 4 3 2 1
0 0 0 0 0 0 0 0Reserved
0 0 0 0 0 0 0 1MANAGE UE POLICY COMMAND message
0 0 0 0 0 0 1 0MANAGE UE POLICY COMPLETE message
0 0 0 0 0 0 1 1MANAGE UE POLICY COMMAND REJECT message
0 0 0 0 0 1 0 0UE STATE INDICATION message
0 0 0 0 0 1 0 1UE POLICY PROVISIONING REQUEST message (see NOTE)
0 0 0 0 0 1 1 0UE POLICY PROVISIONING REJECT message (see NOTE)
All other values are reserved
NOTE:
Coding and usage of UE POLICY PROVISIONING REQUEST message and UE POLICY PROVISIONING REJECT message are specified in TS 24.587.
Up

D.6.2  UE policy section management listp. 1094

The purpose of the UE policy section management list information element is to transfer from the PCF to the UE a list of instructions to be performed at the UE for management of UE policy section stored at the UE.
The UE policy section management list information element is coded as shown in Figure D.6.2.1, Figure D.6.2.2, Figure D.6.2.3, Figure D.6.2.4, Figure D.6.2.5, Figure D.6.2.6, Figure D.6.2.7 and Table D.6.2.1.
The UE policy section management list information element has a minimum length of 12 octets and a maximum length of 65534 octets.
Reproduction of 3GPP TS 24.501, Fig. D.6.2.1: UE policy section management list information element
Up
Reproduction of 3GPP TS 24.501, Fig. D.6.2.2: UE policy section management list contents
Up
Reproduction of 3GPP TS 24.501, Fig. D.6.2.3: UE policy section management sublist
Up
Reproduction of 3GPP TS 24.501, Fig. D.6.2.4: UE policy section management sublist contents
Up
Reproduction of 3GPP TS 24.501, Fig. D.6.2.5: Instruction
Up
Reproduction of 3GPP TS 24.501, Fig. D.6.2.6: UE policy section contents
Up
Reproduction of 3GPP TS 24.501, Fig. D.6.2.7: UE policy part
Up
Value part of the UE policy section management list information element (octets 4 to z)
The value part of the UE policy section management list information element consists of one or several UE policy section management sublists.
UE policy section management sublist:
Length of UE policy section management sublist (octets d to d+1)
This field contains the binary encoding of the length of the UE policy section management sublist in units of octets.
MCC, Mobile country code (octet d+2, and bits 4 to 1 of octet d+3)
The MCC field is coded as in ITU-T Recommendation E.212 [42], Annex A.
MNC, Mobile network code (bits 8 to 5 of octet d+3, and octet d+4)
The coding of this field is the responsibility of each administration but BCD coding shall be used. The MNC shall consist of 2 or 3 digits. If a network operator decides to use only two digits in the MNC, MNC digit 3 shall be coded as "1111" (NOTE 1).
UE policy section management sublist contents (octets d+5 to y)
The UE policy section management sublist contents consist of one or several instructions.
Instruction:
Instruction contents length (octets d+5 to d+6)
This field contains the binary encoding of the instruction contents length in units of octets.
UPSC (octets d+7 to d+8)
This field contains the binary encoding of the UPSC. The value of the UPSC is set by the PCF.
UE policy section contents (octets d+9 to k)
The UE policy section contents consist of one or several UE policy parts.
UE policy part:
UE policy part contents length (octets q to q+1)
This field contains the binary encoding of the UE policy part contents length in units of octets (NOTE 2).
UE policy part type (bits 4 to 1 of octet q+2)
Bits
4 3 2 1
0 0 0 0Reserved
0 0 0 1URSP
0 0 1 0ANDSP
0 0 1 1V2XP
0 1 0 0ProSeP
0 1 0 1A2XP
0 1 1 0RSLPP
All other values are reserved.
Bits 8 to 5 of octet q+2 are spare and shall be coded as zero.
UE policy part contents (octets q+3 to r)
This field contains a UE policy part encoded as specified in TS 24.526 for the UE policy part type field set to "URSP" or "ANDSP", in TS 24.588 for the UE policy part type field set to "V2XP", in TS 24.555 for the UE policy part type field set to "ProSeP" and in TS 24.514 [62] for the UE policy part type field set to "RSLPP" and in TS 24.578 [61] for the UE policy part type field set to "A2XP" respectively.
NOTE 1:
When the PCF is in an SNPN, the PCF shall include the PLMN ID part of the SNPN identity in the UE policy section management sublist.
NOTE 2:
The UE policy part contents length indicates the length of the value part of the UE policy part field (i.e. octet q+2 to octet r).
Up

Up   Top   ToC