Content for TS 31.102 Word version: 18.3.0
0…
3…
4…
4.2.9…
4.2.17…
4.2.26…
4.2.34…
4.2.44…
4.2.52…
4.2.60…
4.2.68…
4.2.76…
4.2.85…
4.2.93…
4.2.101…
4.2.107…
4.3…
4.4.2…
4.4.2.4…
4.4.3…
4.4.4…
4.4.5…
4.4.6…
4.4.8…
4.4.8.7…
4.4.9…
4.4.11…
4.4.11.7…
4.4.11.17…
4.4.12…
4.5…
4.6…
4.7
5…
5.2…
5.3…
5.4…
5.9…
6…
7…
7.1.2…
7.3…
A
B…
D
E…
G
H…
I…
L…
M…
4.4.12 Contents of files at the DF SNPN level
4.4.12.1 Introduction
4.4.12.2 EFPWS_SNPN (Public Warning System in SNPNs)
4.4.12.3 EFNID (Network Identifier for SNPN)
4.4.13 Contents of files at the DF 5G ProSe level
4.4.13.1 Introduction
4.4.13.2 EF5G_PROSE_ST (5G ProSe Service Table)
4.4.13.3 EF5G_PROSE_DD (5G ProSe configuration data for direct discovery)
4.4.13.4 EF5G_PROSE_DC (5G ProSe configuration data for direct communication)
4.4.13.5 EF5G_PROSE_U2NRU (5G ProSe configuration data for UE-to-network relay UE)
4.4.13.6 EF5G_PROSE_RU (5G ProSe configuration data for remote UE)
4.4.13.7 EF5G_PROSE_UIR (5G ProSe configuration data for usage information reporting)
4.4.13.8 EF5G_PROSE_U2URU (5G ProSe configuration data for UE-to-UE relay UE)
4.4.13.9 EF5G_PROSE_EU (5G ProSe configuration data for end UE)
4.4.14 Contents of files at the DF 5MBS UE pre-configuration level
4.4.14.1 Introduction
4.4.14.2 EF5MBSUECONFIG (5MBS UE pre-configuration)
4.4.14.3 EF5MBSUSD (5MBS User Service Description)
...
...
4.4.12 Contents of files at the DF SNPN level |R17| p. 224
4.4.12.1 Introduction p. 224
This clause describes the files that are specific for Standalone Non-Public Networks (SNPNs).
DFSNPN shall be present at the ADFUSIM level if any of the following services are "available" in EFUST (USIM Service Table):
4.4.12.2 EFPWS_SNPN (Public Warning System in SNPNs) p. 224
If service No. 143 is "available", this file shall be present. This EF contains the configuration parameters for PWS in SNPNs, as defined in TS 23.122.
| Identifier: '4F01' | Structure: transparent | Optional |
| SFI: '01' | |||||||||
| File size: X bytes (X ≥ 1) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 | PWS configuration in SNPN | M | 1 byte |
Contents:
Configuration for PWS in SNPNs
Coding:
First byte:
| b8 | b7 | b6 | b5 | b4 | b3 | b2 | b1 |
|---|---|---|---|---|---|---|---|
| RFU (see TS 31.101) |
b2=0
process all PWS warning messages in non-subscibed SNPNs
b2=1
ignore all PWS warning messages in non-subscribed SNPNs
|
b1=0
process all PWS warning messages in subscribed SNPN
b1=1
ignore all PWS warning messages in subscribed SNPN
|
|||||
4.4.12.3 EFNID (Network Identifier for SNPN) p. 225
If service No. 146 is "available", this file shall be present. This file contains a network identifier for SNPN as specified in TS 23.003.
| Identifier: '4F02' | Structure: linear fixed | Optional |
| SFI: '02' | |||||||||
| Record size: 6 bytes | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 | Assignment mode | M | 1 byte |
| 2-6 | Network Identifier value | M | 5 bytes |
Assignment mode
Contents:
The assignment mode for the network identifier for SNPN as specified in TS 23.003.
Coding:
The assignment mode is coded as one hexadecimal value according to TS 23.003. The 4 most significant bits in the Assignment mode byte shall be ignored by the ME.
| Value | Assignment mode |
|---|---|
| '00' | Coordinated assignment; option 1 |
| '01' | Self assignment |
| '02' | Coordinated assignment; option 2 |
| All other values are reserved |
Network identifier for SNPN value
Contents and coding see TS 23.003.
4.4.13 Contents of files at the DF 5G ProSe level |R17| p. 224
4.4.13.1 Introduction p. 225
This clause describes the additional files that are used for 5G ProSe purposes. The EFs in the Dedicated File DF5G_ProSe contain configuration data related to 5G ProSe, as specified in TS 24.554.
DF5G_ProSe shall be present at the ADFUSIM level if Service No. 139 is "available" in EFUST.
4.4.13.2 EF5G_PROSE_ST (5G ProSe Service Table) p. 226
If service No. 139 is "available" in the USIM Service Table, this file shall be present. This EF indicates which 5G ProSe services are available. If a service is not indicated as available in the 5G ProSe Service Table, the ME shall not select this service.
| Identifier: '4F01' | Structure: transparent | Optional |
| SFI: '01' | |||||||||
| File size: X bytes, (X ≥ 1) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 | Services No. 1 to No. 8 | M | 1 byte |
| 2 | Services No. 9 to No. 16 | O | 1 byte |
| etc. | |||
| X | Services No. (8X-7) to No. (8X) | O | 1 byte |
Services
Contents:
Coding:
Service No. 1
5G ProSe configuration data for direct discovery
Service No. 2
5G ProSe configuration data for direct communication
Service No. 3
5G ProSe configuration data for UE-to-network relay UE
Service No. 4
5G ProSe configuration data for remote UE
Service No. 5
5G ProSe configuration data for usage information reporting
Service No. 6
5G ProSe configuration data for UE-to-UE relay UE
Service No. 7
5G ProSe configuration data for end UE
The EF shall contain at least one byte for services. Further bytes may be included, but if the EF includes an optional byte, then it is mandatory for the EF to also contain all bytes before that byte. Other services are possible in the future and will be coded on further bytes in the EF.
Same as coding of USIM Service Table.
4.4.13.3 EF5G_PROSE_DD (5G ProSe configuration data for direct discovery) p. 226
If service No. 139 is "available" in the USIM Service Table and service No. 1 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for direct discovery. The format of the 5G ProSe policy for direct discovery are specified in TS 24.555.
| Identifier: '4F02' | Structure: Transparent | Optional |
| SFI: '02' | |||||||||
| File size: X bytes, (X ≥ 26) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | 5G ProSe configuration data for direct discovery TLV objects | M | X bytes |
The 5G ProSe configuration data for direct discovery data object parameters tags:
The 5G ProSe configuration data for direct discovery contents:
| Description | Tag Value |
|---|---|
| 5G ProSe configuration data for direct discovery Tag | 'A0' |
|
Served by NG-RAN Tag
| '80' |
|
Not served by NG-RAN Tag
| '81' |
|
ProSe identifiers Tag
| '82' |
|
ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules Tag
| '83' |
|
Group member discovery parameters Tag
| '84' |
|
Validity timer Tag
| '85' |
|
ProSe direct discovery UE ID Tag
| '86' |
|
HPLMN 5G DDNMF address information Tag
| '98' |
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| 5G ProSe configuration data for direct discovery Tag | 'A0' | M | 1 |
| Length | Note 1 | M | Note 2 |
| Validity timer Tag | '85' | M | 1 |
| Length | 5 | M | Note 2 |
| Validity timer information | -- | M | 5 |
| Served by NG-RAN Tag | '80' | M | 1 |
| Length | X1 | M | Note 2 |
| Served by NG-RAN information | -- | M | X1 |
| Not served by NG-RAN Tag | '81' | M | 1 |
| Length | X2 | M | Note 2 |
| Not served by NG-RAN information | -- | M | X2 |
| ProSe direct discovery UE ID Tag | '86' | M | 1 |
| Length | 3 | M | Note 2 |
| ProSe direct discovery UE ID information | -- | M | 3 |
| ProSe identifiers Tag | '82' | M | 1 |
| Length | X3 | M | Note 2 |
| ProSe identifiers information | -- | M | X3 |
| ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules Tag | '83' | M | 1 |
| Length | X4 | M | Note 2 |
| ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules information | -- | M | X4 |
| Group member discovery parameters Tag | '84' | O | 1 |
| Length | X5 | O | Note 2 |
| Group member discovery parameters information | -- | O | 1 |
| HPLMN 5G DDNMF address information Tag | '98' | O | 1 |
| Length | X6+1 | O | Note 2 |
| HPLMN 5G DDNMF address information type | -- | O | 1 |
| HPLMN 5G DDNMF address information information | -- | O | X6 |
|
NOTE 1:
This is the total size of the constructed TLV object.
NOTE 2:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
Validity timer Tag '85'
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for direct discovery.
Coding:
The Validity timer information is encoded as shown in Figure 5.3.2.1 and Table 5.3.2.1 of TS 24.555.
Served by NG-RAN Tag '80'
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for direct discovery when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in Figures 5.3.2.2 to 5.3.2.5 and Tables 5.3.2.2 to 5.3.2.5 of TS 24.555.
Not served by NG-RAN Tag '81'
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for direct discovery when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in Figures 5.3.2.6 to 5.3.2.11a and Tables 5.3.2.6 to 5.3.2.11a of TS 24.555.
ProSe direct discovery UE ID
Contents:
The ProSe direct discovery UE ID information contains ProSe direct discovery UE ID for restricted direct discovery.
Coding:
The ProSe direct discovery UE ID information is encoded as shown in Figure 5.3.2.1 and Table 5.3.2.1 of TS 24.555.
ProSe identifiers Tag '82'
Contents:
The ProSe identifiers information contains ProSe application identifiers to be used for direct discovery.
Coding:
The ProSe identifiers information is encoded as shown in Figure 5.3.2.14 and Table 5.3.2.14 of TS 24.555.
ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules Tag '83'
Contents:
The ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules information contains a list of ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules.
Coding:
The ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules information is encoded as shown in Figures 5.3.2.15 to 5.3.2.16 and Tables 5.3.2.15 to 5.3.2.16 of TS 24.555.
Group member discovery parameters Tag '84'
Contents:
The Group member discovery parameters information contains group member discovery parameters.
Coding:
The Group member discovery parameters information is encoded as shown in Figures 5.3.2.12 to 5.3.2.13 and Tables 5.3.2.12 to 5.3.2.13 of TS 24.555.
HPLMN 5G DDNMF address information Tag '98'
Contents:
The HPLMN 5G DDNMF address information information contains the HPLMN 5G DDNMF address information type and the HPLMN 5G DDNMF address information.
Coding:
The HPLMN 5G DDNMF address information type indicates the type of the HPLMN 5G DDNMF address information. A value of '00' indicates FQDN, a value of '01' indicates IPv4, a value of '02' indicates IPv6, a value of '03' indicates IPv4v6. All other values are reserved.
The HPLMN 5G DDNMF address information information is encoded as shown in Figures 5.3.2.17 and Tables 5.3.2.17 of TS 24.555.
4.4.13.4 EF5G_PROSE_DC (5G ProSe configuration data for direct communication) p. 229
If service No. 139 is "available" in the USIM Service Table and service No. 2 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for direct communication. The format of the 5G ProSe policy for direct communication are specified in TS 24.555.
| Identifier: '4F03' | Structure: Transparent | Optional |
| SFI: '03' | |||||||||
| File size: X bytes, (X ≥ 12) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | 5G ProSe configuration data for direct communication TLV objects | M | X bytes |
The 5G ProSe configuration data for direct communication data object parameters tags:
The 5G ProSe configuration data for direct communication contents:
| Description | Tag Value |
|---|---|
| 5G ProSe configuration data for direct communication Tag | 'A0' |
|
Served by NG-RAN Tag
| '80' |
|
Not served by NG-RAN Tag
| '81' |
|
Privacy config Tag
| '87' |
|
5G ProSe direct communication in NR-PC5 Tag
| '88' |
|
ProSe application to path preference mapping rules Tag
| '89' |
|
Validity timer Tag
| '85' |
|
ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules Tag
| '91' |
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| 5G ProSe configuration data for direct communication Tag | 'A0' | M | 1 |
| Length | Note 1 | M | Note 2 |
| Validity timer Tag | '85' | M | 1 |
| Length | 5 | M | Note 2 |
| Validity timer information | -- | M | 5 |
| Served by NG-RAN Tag | '80' | M | 1 |
| Length | X1 | M | Note 2 |
| Served by NG-RAN information | -- | M | X1 |
| Not served by NG-RAN Tag | '81' | O | 1 |
| Length | X2 | O | Note 2 |
| Not served by NG-RAN information | -- | O | X2 |
| Privacy config Tag | '87' | O | 1 |
| Length | X3 | O | Note 2 |
| Privacy config information | -- | O | X3 |
| 5G ProSe direct communication in NR-PC5 Tag | '88' | O | 1 |
| Length | X4 | O | Note 2 |
| 5G ProSe direct communication in NR-PC5 information | -- | O | X4 |
| ProSe application to path preference mapping rules Tag | '89' | O | 1 |
| Length | X5 | O | Note 2 |
| ProSe application to path preference mapping rules information | -- | O | X5 |
| ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules Tag | '91' | O | 1 |
| Length | X6 | O | Note 2 |
| ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules information | -- | O | X6 |
|
NOTE 1:
This is the total size of the constructed TLV object.
NOTE 2:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
Validity timer Tag '85'
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for direct communication.
Coding:
The Validity timer information is encoded as shown in Figure 5.4.2.1 and Table 5.4.2.1 of TS 24.555.
Served by NG-RAN Tag '80'
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for direct communication when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in Figures 5.4.2.2 to 5.4.2.4 and Tables 5.4.2.2 to 5.4.2.4 of TS 24.555.
Not served by NG-RAN Tag '81'
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for direct communication when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in Figures 5.4.2.5 to 5.4.2.10c and Tables 5.4.2.5 to 5.4.2.10c of TS 24.555.
Privacy config Tag '87'
Contents:
The Privacy config information contains configuration parameters for privacy configuration.
Coding:
The Privacy config information is encoded as shown in Figures 5.4.2.11 to 5.4.2.15 and Tables 5.4.2.11 to 5.4.2.15 of TS 24.555.
5G ProSe direct communication in NR-PC5 Tag '88'
Contents:
The 5G ProSe direct communication in NR-PC5 information contains configuration parameters for 5G ProSe direct communication in NR-PC5.
Coding:
The 5G ProSe direct communication in NR-PC5 information is encoded as shown in Figures 5.4.2.16 to 5.4.2.38 and Tables 5.4.2.16 to 5.4.2.38 of TS 24.555.
ProSe application to path preference mapping rules Tag '89'
Contents:
The ProSe application to path preference mapping rules information contains a list of ProSe application to path preference mapping rules.
Coding:
The ProSe application to path preference mapping rules information is encoded as shown in Figures 5.4.2.39 to 5.4.2.40 and Tables 5.4.2.39 to 5.4.2.40 of TS 24.555.
ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules Tag '91'
Contents:
The ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules information contains a list of ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules.
Coding:
The ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules information is encoded as shown in Figures 5.4.2.41 to 5.4.2.42 and Tables 5.4.2.41 to 5.4.2.42 of TS 24.555.
4.4.13.5 EF5G_PROSE_U2NRU (5G ProSe configuration data for UE-to-network relay UE) p. 231
If service No. 139 is "available" in the USIM Service Table and service No. 3 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for UE-to-network relay UE. The format of the 5G ProSe policy for UE-to-network relay UE are specified in TS 24.555.
| Identifier: '4F04' | Structure: Transparent | Optional |
| SFI: '04' | |||||||||
| File size: X bytes, (X ≥ 32) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | 5G ProSe configuration data for UE-to-network relay UE TLV objects | M | X bytes |
The 5G ProSe configuration data for UE-to-network relay UE data object parameters tags:
The 5G ProSe configuration data for UE-to-network relay UE contents:
| Description | Tag Value |
|---|---|
| 5G ProSe configuration data for UE-to-network relay UE Tag | 'A0' |
|
Served by NG-RAN Tag
| '80' |
|
Not served by NG-RAN Tag
| '81' |
|
Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation Tag
| '8A' |
|
RSC info list Tag
| '8B' |
|
5QI to PC5 QoS parameters mapping rules Tag
| '8C' |
|
ProSe identifier to ProSe application server address mapping rules Tag
| '8D' |
|
Validity timer Tag
| '85' |
|
User info ID for discovery Tag
| '8E' |
|
Privacy timer Tag
| '92' |
|
5G PKMF address information Tag
| '93' |
|
Warning message broadcast Tag
| '9B' |
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| 5G ProSe configuration data for UE-to-network relay UE Tag | 'A0' | M | 1 |
| Length | Note 1 | M | Note 2 |
| Validity timer Tag | '85' | M | 1 |
| Length | 5 | M | Note 2 |
| Validity timer information | -- | M | 5 |
| Served by NG-RAN Tag | '80' | M | 1 |
| Length | X1 | M | Note 2 |
| Served by NG-RAN information | -- | M | X1 |
| Not served by NG-RAN Tag | '81' | M | 1 |
| Length | X2 | M | Note 2 |
| Not served by NG-RAN information | -- | M | X2 |
| Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation Tag | '8A' | M | 1 |
| Length | X3 | M | Note 2 |
| Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation information | -- | M | X3 |
| User info ID for discovery Tag | '8E' | M | 1 |
| Length | 6 | M | Note 2 |
| User info ID for discovery information | -- | M | 6 |
| RSC info list Tag | '8B' | M | 1 |
| Length | X4 | M | Note 2 |
| RSC info list information | -- | M | X4 |
| 5QI to PC5 QoS parameters mapping rules Tag | '8C' | M | 1 |
| Length | X5 | M | Note 2 |
| 5QI to PC5 QoS parameters mapping rules information | -- | M | X5 |
| ProSe identifier to ProSe application server address mapping rules Tag | '8D' | O | 1 |
| Length | X6 | O | Note 2 |
| ProSe identifier to ProSe application server address mapping rules information | -- | O | X6 |
| Privacy timer Tag | '92' | O | 1 |
| Length | X7 | O | Note 2 |
| Privacy timer information | -- | O | X7 |
| 5G PKMF address information Tag | '93' | O | 1 |
| Length | X8 | O | Note 2 |
| 5G PKMF address information information | -- | O | X8 |
| Warning message broadcast Tag | '9B' | O | 1 |
| Length | X9 | O | Note 2 |
| Warning message broadcast information | -- | O | X9 |
|
NOTE 1:
This is the total size of the constructed TLV object.
NOTE 2:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
Validity timer Tag '85'
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for UE-to-network relay UE.
Coding:
The Validity timer information is encoded as shown in Figure 5.5.2.1 and Table 5.5.2.1 of TS 24.555.
Served by NG-RAN Tag '80'
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for UE-to-network relay UE when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in Figures 5.5.2.2 to 5.5.2.4 and Tables 5.5.2.2 to 5.5.2.4 of TS 24.555.
Not served by NG-RAN Tag '81'
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for UE-to-network relay UE when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in Figures 5.5.2.5 to 5.5.2.11a and Tables 5.5.2.5 to 5.5.2.11a of TS 24.555.
Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation Tag '8A'
Contents:
The Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation information contains the default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation.
Coding:
The Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation information is encoded as shown in Figure 5.5.2.11b and Table 5.5.2.11b of TS 24.555.
User info ID for discovery Tag '8E'
Contents:
The User info ID for discovery information contains the user info ID for 5G ProSe UE-to-network relay UE.
Coding:
The User info ID for discovery information is encoded as shown in Figure 5.5.2.1 and Table 5.5.2.1 of TS 24.555.
RSC info list Tag '8B'
Contents:
The RSC info list information contains a list of RSCs related parameters.
Coding:
The RSC info list information is encoded as shown in Figures 5.5.2.12 to 5.5.2.16 and Tables 5.5.2.12 to 5.5.2.16 of TS 24.555.
5QI to PC5 QoS parameters mapping rules Tag '8C'
Contents:
The 5QI to PC5 QoS parameters mapping rules information contains a list of 5QI to PC5 QoS parameters mapping rules.
Coding:
The 5QI to PC5 QoS parameters mapping rules information is encoded as shown in Figures 5.5.2.17 to 5.5.2.18 and Tables 5.5.2.17 to 5.5.2.18 of TS 24.555.
ProSe identifier to ProSe application server address mapping rules Tag '8D'
Contents:
The ProSe identifier to ProSe application server address mapping rules information contains a list of ProSe identifier to ProSe application server address mapping rules.
Coding:
The ProSe identifier to ProSe application server address mapping rules information is encoded as shown in Figures 5.5.2.19 to 5.5.2.20 and Tables 5.5.2.19 to 5.5.2.20 of TS 24.555.
Privacy timer Tag '92'
Contents:
The Privacy timer information contains a binary encoded duration, in units of seconds, after which the UE shall change the source layer-2 ID self-assigned by the UE while performing transmission of 5G ProSe direct communication.
Coding:
The privacy timer information is encoded as shown in Figures 5.5.2.1 and Tables 5.5.2.1 of TS 24.555.
5G PKMF address information Tag '93'
Contents:
The 5G PKMF address information information contains the address information of 5G PKMF.
Coding:
The 5G PKMF address information information is encoded as shown in Figures 5.5.2.21 to 5.5.2.23 and Tables 5.5.2.21 of TS 24.555.
Warning message broadcast Tag '9B'
Contents:
The warning message broadcast information contains the parameters for broadcasting the warning messages.
Coding:
The warning message broadcast information is encoded as shown in Figures 5.5.2.24 to 5.5.2.25 and Tables 5.5.2.24 to 5.5.2.25 of TS 24.555.
4.4.13.6 EF5G_PROSE_RU (5G ProSe configuration data for remote UE) p. 235
If service No. 139 is "available" in the USIM Service Table and service No. 4 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for remote UE. The format of the 5G ProSe policy for remote UE are specified in TS 24.555.
| Identifier: '4F05' | Structure: Transparent | Optional |
| SFI: '05' | |||||||||
| File size: X bytes, (X ≥ 29) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | 5G ProSe configuration data for remote UE TLV objects | M | X bytes |
The 5G ProSe configuration data for remote UE data object parameters tags:
The 5G ProSe configuration data for remote UE contents:
| Description | Tag Value |
|---|---|
| 5G ProSe configuration data for remote UE Tag | 'A0' |
|
Served by NG-RAN Tag
| '80' |
|
Not served by NG-RAN Tag
| '81' |
|
Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information Tag
| '8F' |
|
RSC info list Tag
| '8B' |
|
N3IWF selection information for 5G ProSe layer-3 remote UE Tag
| '90' |
|
Validity timer Tag
| '85' |
|
User info ID for discovery Tag
| '8E' |
|
Privacy timer Tag
| '92' |
|
5G PKMF address information Tag
| '93' |
|
Warning message broadcast Tag
| '9B' |
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| 5G ProSe configuration data for remote UE Tag | 'A0' | M | 1 |
| Length | Note 1 | M | Note 2 |
| Validity timer Tag | '85' | M | 1 |
| Length | 5 | M | Note 2 |
| Validity timer information | -- | M | 5 |
| Served by NG-RAN Tag | '80' | M | 1 |
| Length | X1 | M | Note 2 |
| Served by NG-RAN information | -- | M | X1 |
| Not served by NG-RAN Tag | '81' | M | 1 |
| Length | X2 | M | Note 2 |
| Not served by NG-RAN information | -- | M | X2 |
| Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information Tag | '8F' | M | 1 |
| Length | X3 | M | Note 2 |
| Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information information | -- | M | X3 |
| User info ID for discovery Tag | '8E' | M | 1 |
| Length | 6 | M | Note 2 |
| User info ID for discovery information | -- | M | 6 |
| RSC info list Tag | '8B' | M | 1 |
| Length | X4 | M | Note 2 |
| RSC info list information | -- | M | X4 |
| N3IWF selection information for 5G ProSe layer-3 remote UE Tag | '90' | O | 1 |
| Length | X5 | O | Note 2 |
| N3IWF selection information for 5G ProSe layer-3 remote UE information | -- | O | X5 |
| Privacy timer Tag | '92' | O | 1 |
| Length | 2 | O | Note 2 |
| Privacy timer information | -- | O | 2 |
| 5G PKMF address information Tag | '93' | O | 1 |
| Length | X6 | O | Note 2 |
| 5G PKMF address information information | -- | O | X6 |
| Warning message broadcast Tag | '9B' | O | 1 |
| Length | X7 | O | Note 2 |
| Warning message broadcast information | -- | O | X7 |
|
NOTE 1:
This is the total size of the constructed TLV object.
NOTE 2:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
Validity timer Tag '85'
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for remote UE.
Coding:
The Validity timer information is encoded as shown in Figure 5.6.2.1 and Table 5.6.2.1 of TS 24.555.
Served by NG-RAN Tag '80'
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for remote UE when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in Figures 5.6.2.2 to 5.6.2.4 and Tables 5.6.2.2 to 5.6.2.4 of TS 24.555.
Not served by NG-RAN Tag '81'
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for remote UE when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in Figures 5.6.2.5 to 5.6.2.11a and Tables 5.6.2.5 to 5.6.2.11a of TS 24.555.
Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information Tag '8F'
Contents:
The Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information information contains the default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information.
Coding:
The Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information information is encoded as shown in Figures 5.6.2.11b and Tables 5.6.2.11b of TS 24.555.
User info ID for discovery Tag '8E'
Contents:
The User info ID for discovery information contains the user info ID for 5G ProSe remote UE.
Coding:
The User info ID for discovery information is encoded as shown in Figure 5.6.2.1 and Table 5.6.2.1 of TS 24.555.
RSC info list Tag '8B'
Contents:
The RSC info list information contains a list of RSCs related parameters.
Coding:
The RSC info list information is encoded as shown in Figures 5.6.2.12 to 5.6.2.16a and Tables 5.6.2.12 to 5.6.2.16a of TS 24.555.
N3IWF selection information for 5G ProSe layer-3 remote UE Tag '90'
Contents:
The N3IWF selection information for 5G ProSe layer-3 remote UE information contains two parts:
Coding:
- N3IWF identifier configuration (either FQDN or IP address) for 5G ProSe layer-3 remote UE; and
- 5G ProSe layer-3 UE-to-network relay access node selection information.
The N3IWF selection information for 5G ProSe layer-3 remote UE information is encoded as shown in Figures 5.6.2.17 to 5.6.2.19 and Tables 5.6.2.17 to 5.6.2.19 of TS 24.555.
Privacy timer Tag '92'
Contents:
The Privacy timer information contains a binary encoded duration, in units of seconds, after which the UE shall change the source layer-2 ID self-assigned by the UE while performing transmission of 5G ProSe direct communication.
Coding:
The privacy timer information is encoded as shown in Figures 5.6.2.1 and Tables 5.6.2.1 of TS 24.555.
5G PKMF address information Tag '93'
Contents:
The 5G PKMF address information information contains the address information of 5G PKMF.
Coding:
The 5G PKMF address information information is encoded as shown in Figures 5.5.2.21 to 5.5.2.23 and Tables 5.5.2.21 of TS 24.555.
Warning message broadcast Tag '9B'
Contents:
The warning message broadcast information contains the parameters for broadcasting the warning messages.
Coding:
The warning message broadcast information is encoded as shown in Figures 5.6.2.20 to 5.6.2.21 and Tables 5.6.2.20 to 5.6.2.21 of TS 24.555.
4.4.13.7 EF5G_PROSE_UIR (5G ProSe configuration data for usage information reporting) p. 239
If service No. 139 is "available" in the USIM Service Table and service No. 5 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for usage information reporting. The format of the 5G ProSe policy for usage information reporting are specified in TS 24.555.
| Identifier: '4F06' | Structure: Transparent | Optional |
| SFI: '06' | |||||||||
| File size: X bytes, (X ≥ 32) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | 5G ProSe configuration data for usage information reporting TLV objects | M | X bytes |
The 5G ProSe configuration data for usage information reporting data object parameters tags:
The 5G ProSe configuration data for usage information reporting contents:
| Description | Tag Value |
|---|---|
| 5G ProSe configuration data for UE-to-network relay UE Tag | 'A0' |
|
Validity timer Tag
| '85' |
|
Collection period Tag
| '94' |
|
Reporting window Tag
| '95' |
|
Reporting indicators Tag
| '96' |
|
5G DDNMF CTF address for uploading the usage information reports Tag
| '97' |
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| 5G ProSe configuration data for usage information reporting Tag | 'A0' | M | 1 |
| Length | Note 1 | M | Note 2 |
| Validity timer Tag | '85' | M | 1 |
| Length | 5 | M | Note 2 |
| Validity timer information | -- | M | 5 |
| Collection period Tag | '94' | M | 1 |
| Length | 3 | M | Note 2 |
| Collection period information | -- | M | 3 |
| Reporting window Tag | '95' | M | 1 |
| Length | 3 | M | Note 2 |
| Reporting window information | -- | M | 3 |
| Reporting indicators Tag | '96' | M | 1 |
| Length | 2 | M | Note 2 |
| Reporting indicators information | -- | M | 2 |
| 5G DDNMF CTF address for uploading the usage information reports Tag | '97' | M | 1 |
| Length | X1 | M | Note 2 |
| 5G DDNMF CTF address for uploading the usage information reports information | -- | M | X1 |
|
NOTE 1:
This is the total size of the constructed TLV object.
NOTE 2:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
Validity timer Tag '85'
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for usage information reporting.
Coding:
The Validity timer information is encoded as shown in Figure 5.7.2.1 and Table 5.7.2.1 of TS 24.555.
Collection period Tag '94'
Contents:
The Collection period information contains the time interval, in unit of minutes, at which the UE shall generate the usage information reports.
Coding:
The Collection period information is encoded as shown in Figures 5.7.2.1 and .Tables 5.7.2.1 of TS 24.555.
Reporting window Tag '95'
Contents:
The Reporting window information contains the time window, in units of minutes, during which the UE shall upload the usage information report.
Coding:
The Reporting window information is encoded as shown in Figures 5.7.2.1 and Tables 5.7.2.1 of TS 24.555.
Reporting indicators Tag '96'
Contents:
The Reporting indicators information contains the status of several reporting indicators.
Coding:
The reporting indicator is set as follows:
bit = 1:
Byte 2:
Set indication active
bit = 0:
Set indication inactive.
Byte 1:
| b8 | b7 | b6 | b5 | b4 | b3 | b2 | b1 |
|---|---|---|---|---|---|---|---|
| UE locations reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | Group parameters reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | Time stamps in and out of NG-RAN coverage reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | Time stamps of the first transmission/reception reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | Data transmitted reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | Data received reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | ||
| b8 | b7 | b6 | b5 | b4 | b3 | b2 | b1 |
|---|---|---|---|---|---|---|---|
| RFU | Radio parameters reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | QoS flow reporting indicator, as defined in Tables 5.7.2.1 of TS 24.555. | Address type, as defined in Tables 5.7.2.1 of TS 24.555. | ||||
5G DDNMF CTF address for uploading the usage information reports Tag '97'
Contents:
The 5G DDNMF CTF address for uploading the usage information reports information contains a list of ProSe identifier to ProSe application server address mapping rules.
Coding:
The 5G DDNMF CTF address for uploading the usage information reports information is encoded as shown in Figures 5.7.2.1 and Tables 5.7.2.1 of TS 24.555.
4.4.13.8 EF5G_PROSE_U2URU (5G ProSe configuration data for UE-to-UE relay UE) |R18| p. 241
If service No. 139 is "available" in the USIM Service Table and service No. 6 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for UE-to-UE relay UE. The format of the 5G ProSe policy for UE-to-UE relay UE are specified in TS 24.555.
| Identifier: '4F07' | Structure: Transparent | Optional |
| SFI: '07' | |||||||||
| Record size: X bytes, (X ≥ 46) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | 5G ProSe configuration data for UE-to-UE relay UE TLV objects | M | X bytes |
The 5G ProSe configuration data for UE-to-UE relay UE data object parameters tags:
The 5G ProSe configuration data for UE-to-UE relay UE contents:
| Description | Tag Value |
|---|---|
| 5G ProSe configuration data for UE-to-UE relay UE Tag | 'A0' |
|
Validity timer Tag
| '85' |
|
Served by NG-RAN Tag
| '80' |
|
Not served by NG-RAN Tag
| '81' |
|
Default destination layer-2 IDs for sending the discovery signalling for announcement and for receiving the discovery signalling for solicitation Tag
| '99' |
|
User info ID for discovery Tag
| '8E' |
|
RSC info list Tag
| '8B' |
|
Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery Tag
| '9A' |
|
5G PKMF address information
| '93' |
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| 5G ProSe configuration data for UE-to-UE relay UE Tag | 'A0' | M | 1 |
| Length | Note 1 | M | Note 2 |
| Validity timer Tag | '85' | M | 1 |
| Length | 5 | M | Note 2 |
| Validity timer information | -- | M | 5 |
| Served by NG-RAN Tag | '80' | M | 1 |
| Length | X1 | M | Note 2 |
| Served by NG-RAN information | -- | M | X1 |
| Not served by NG-RAN Tag | '81' | M | 1 |
| Length | X2 | M | Note 2 |
| Not served by NG-RAN information | -- | M | X2 |
| Default destination layer-2 IDs for sending the discovery signalling for announcement and for receiving the discovery signalling for solicitation Tag | '99' | M | 1 |
| Length | X3 | M | Note 2 |
| Default destination layer-2 IDs for sending the discovery signalling for announcement and for receiving the discovery signalling for solicitation information | -- | M | X3 |
| User info ID for discovery Tag | '8E' | M | 1 |
| Length | 6 | M | Note 2 |
| User info ID for discovery information | -- | M | 6 |
| RSC info list Tag | '8B' | M | 1 |
| Length | X4 | M | Note 2 |
| RSC info list information | -- | M | X4 |
| Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery Tag | '9A' | M | 1 |
| Length | X5 | M | Note 2 |
| Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery information | -- | M | X5 |
| 5G PKMF address information Tag | '93' | O | 1 |
| Length | X6 | O | Note 2 |
| 5G PKMF address information information | -- | O | X6 |
|
NOTE 1:
This is the total size of the constructed TLV object.
NOTE 2:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
Validity timer Tag '85'
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for UE-to-UE relay UE.
Coding:
The Validity timer information is encoded as shown in Figure 5.8.2.1 and Table 5.8.2.1 of TS 24.555.
Served by NG-RAN Tag '80'
Contents:
The Served by NG-RAN information contains 5G ProSe configuration data for UE-to-UE relay UE when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in Figures 5.8.2.2 to 5.8.2.4 and Tables 5.8.2.2 to 5.8.2.4 of TS 24.555.
Not served by NG-RAN Tag '81'
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration data for UE-to-UE relay UE when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in Figures 5.8.2.5 to 5.8.2.11a and Tables 5.8.2.5 to 5.8.2.11a of TS 24.555.
Default destination layer-2 IDs for sending the discovery signalling for announcement and for receiving the discovery signalling for solicitation Tag '99'
Contents:
The Default destination layer-2 IDs for sending the discovery signalling for announcement and for receiving the discovery signalling for solicitation information contains the default destination layer-2 IDs for sending the discovery signalling for announcement and for receiving the discovery signalling for solicitation.
Coding:
The Default destination layer-2 IDs for sending the discovery signalling for announcement and for receiving the discovery signalling for solicitation information is encoded as shown in Figure 5.8.2.11b and Table 5.8.2.11b of TS 24.555.
User info ID for discovery Tag '8E'
Contents:
The User info ID for discovery information contains the user info ID for 5G ProSe UE-to-UE relay UE.
Coding:
The User info ID for discovery information is encoded as shown in Figure 5.8.2.1 and Table 5.8.2.1 of TS 24.555.
RSC info list Tag '8B'
Contents:
The RSC info list information contains a list of RSCs related parameters.
Coding:
The RSC info list information is encoded as shown in Figures 5.8.2.12 to 5.8.2.14 and Tables 5.8.2.12 to 5.8.2.14 of TS 24.555.
Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery Tag '9A'
Contents:
The Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery information contains the default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery.
Coding:
The Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery information is encoded as shown in Figure 5.8.2.15 and Table 5.8.2.15 of TS 24.555.
5G PKMF address information Tag '93'
Contents:
The 5G PKMF address information information contains the address information of 5G PKMF.
Coding:
The 5G PKMF address information information is encoded as shown in Figures 5.5.2.21 to 5.5.2.23 and Tables 5.5.2.21 of TS 24.555.
4.4.13.9 EF5G_PROSE_EU (5G ProSe configuration data for end UE) |R18| p. 244
If service No. 139 is "available" in the USIM Service Table and service No. 7 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for end UE. The format of the 5G ProSe policy for end UE are specified in TS 24.555.
| Identifier: '4F08' | Structure: Transparent | Optional |
| SFI: '08' | |||||||||
| Record size: X bytes, (X ≥ 46) | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | 5G ProSe configuration data for end UE TLV objects | M | X bytes |
The 5G ProSe configuration data for end UE data object parameters tags:
The 5G ProSe configuration data for end relay UE contents:
| Description | Tag Value |
|---|---|
| 5G ProSe configuration data for end UE Tag | 'A0' |
|
Validity timer Tag
| '85' |
|
Served by NG-RAN Tag
| '80' |
|
Not served by NG-RAN Tag
| '81' |
|
Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement Tag
| '9B' |
|
User info ID for discovery Tag
| '8E' |
|
RSC info list Tag
| '8B' |
|
Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery Tag
| '9A' |
|
5G PKMF address information
| '93' |
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| 5G ProSe configuration data for UE-to-UE relay UE Tag | 'A0' | M | 1 |
| Length | Note 1 | M | Note 2 |
| Validity timer Tag | '85' | M | 1 |
| Length | 5 | M | Note 2 |
| Validity timer information | -- | M | 5 |
| Served by NG-RAN Tag | '80' | M | 1 |
| Length | X1 | M | Note 2 |
| Served by NG-RAN information | -- | M | X1 |
| Not served by NG-RAN Tag | '81' | M | 1 |
| Length | X2 | M | Note 2 |
| Not served by NG-RAN information | -- | M | X2 |
| Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement Tag | '9B' | M | 1 |
| Length | X3 | M | Note 2 |
| Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement information | -- | M | X3 |
| User info ID for discovery Tag | '8E' | M | 1 |
| Length | 6 | M | Note 2 |
| User info ID for discovery information | -- | M | 6 |
| RSC info list Tag | '8B' | M | 1 |
| Length | X4 | M | Note 2 |
| RSC info list information | -- | M | X4 |
| Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery Tag | '9A' | M | 1 |
| Length | X5 | M | Note 2 |
| Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery information | -- | M | X5 |
| 5G PKMF address information Tag | '93' | O | 1 |
| Length | X6 | O | Note 2 |
| 5G PKMF address information information | -- | O | X6 |
|
NOTE 1:
This is the total size of the constructed TLV object.
NOTE 2:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
Validity timer Tag '85'
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for end UE.
Coding:
The Validity timer information is encoded as shown in Figure 5.9.2.1 and Table 5.9.2.1 of TS 24.555.
Served by NG-RAN Tag '80'
Contents:
The Served by NG-RAN information contains 5G ProSe configuration data for end UE when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in Figures 5.9.2.2 and Tables 5.9.2.2 of TS 24.555.
Not served by NG-RAN Tag '81'
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration data for end UE when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in Figures 5.9.2.3 to 5.9.2.9a and Tables 5.9.2.3 to 5.9.2.9a of TS 24.555.
Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement Tag '9B'
Contents:
The Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement information contains the default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement.
Coding:
The Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement information is encoded as shown in Figure 5.9.2.9b and Table 5.9.2.9b of TS 24.555.
User info ID for discovery Tag '8E'
Contents:
The User info ID for discovery information contains the user info ID for 5G ProSe end UE.
Coding:
The User info ID for discovery information is encoded as shown in Figure 5.9.2.1 and Table 5.9.2.1 of TS 24.555.
RSC info list Tag '8B'
Contents:
The RSC info list information contains a list of RSCs related parameters.
Coding:
The RSC info list information is encoded as shown in Figures 5.9.2.10 to 5.9.2.12 and Tables 5.9.2.10 to 5.9.2.12 of TS 24.555.
Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery Tag '9A'
Contents:
The Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery information contains the default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery.
Coding:
The Default destination layer-2 ID(s) for sending or receiving the direct communication for 5G ProSe UE-to-UE relay communication with integrated discovery information is encoded as shown in Figure 5.9.2.13 and Table 5.9.2.13 of TS 24.555.
5G PKMF address information Tag '93'
Contents:
The 5G PKMF address information information contains the address information of 5G PKMF.
Coding:
The 5G PKMF address information information is encoded as shown in Figures 5.5.2.21 to 5.5.2.23 and Tables 5.5.2.21 of TS 24.555.
4.4.14 Contents of files at the DF 5MBS UE pre-configuration level |R18| p. 247
4.4.14.1 Introduction p. 247
This clause describes the additional files that are used for UE pre-configuration for 5MBS service configuration.
DF5MBSUECONFIG shall be present at the ADFUSIM level if Service No. 147 is "available" in the EFUST (USIM Service Table).
4.4.14.2 EF5MBSUECONFIG (5MBS UE pre-configuration) p. 247
If Service No. 147 is "available" in EFUST, this file shall be present. This EF contains the configuration of the parameters related to UE pre-configuration for 5MBS service.
| Identifier: '4F01' | Structure: transparent | Optional |
| SFI: Optional | |||||||||
| File size: ≥ X bytes | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to X | UE pre-configuration for PLMN 5MBS data object | O | X |
UE pre-configuration for PLMN 5MBS data object is coded as follows:
| Description | Value | M/O | Length |
|---|---|---|---|
| PLMN 5MBS pre-configuration data object Tag 1 | 'A0' | O | 1 |
| Length | L1 | O | note |
| PLMN 5MBS pre-configuration value 1 | O | L1 | |
| PLMN 5MBS pre-configuration data object Tag 2 | 'A0' | O | 1 |
| Length | L2 | O | note |
| PLMN 5MBS pre-configuration value 2 | O | L2 | |
| … | |||
| PLMN 5MBS pre-configuration data object Tag N | 'A0' | O | 1 |
| Length | LN | O | note |
| PLMN 5MBS pre-configuration value 2 | O | LN | |
|
NOTE:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
PLMN 5MBS pre-configuration data object
Contents:
| Description | M/O |
|---|---|
| PLMN TLV | M |
| TMGI List TLV | O |
| NR-ARFCN List TLV | O |
| PDU Info List TLV | O |
PLMN TLV
Contents:
As described in TS 24.575, the identity of the PLMN for which the 5MBS UE pre-configuration service applies.
The PLMN value is coded:
Coding:
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| PLMN TLV Tag | '80' | M | 1 |
| Length | 3 or 9 | M | 1 |
| PLMN value | -- | M | 3 or 9 |
| 1 to 3 | PLMN (MCC and MNC) | M | 3 bytes |
| 4 to 9 | NID | O | 6 bytes |
MCC and MNC according to TS 24.008.
NID assignment mode and NID value according to clause 9.2.7 of TS 24.502, octets 3 to 8.
TMGI List TLV
Contents:
List of one or more TMGIs.
Coding:
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| TMGI List Tag | '81' | M | 1 |
| Length | 9n | M | Note |
| TMGI entry #1 | -- | M | 9 |
| TMGI entry #2 | -- | O | 9 |
| ... | |||
| TMGI entry #n | -- | O | 9 |
|
NOTE:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
TMGI entry
Contents:
Each entry is coded:
| 1 to 6 | TMGI | M | 6 bytes |
| 7 to 8 | USD File Id | M | 2 bytes |
| 9 | Service type | M | 1 byte |
TMGI
Contents:
The structure of the TMGI is defined in TS 23.003.
Coding:
TMGI is coded in 6 bytes:
- bytes 1 to 3: contain the MBMS Service ID, with the first digit coded in the most significant nibble of the first byte, and the last digit coded in the least significant nibble of the third byte (see octets 3 to 5 in the subclause 10.5.6.13 of TS 24.008).
- bytes 4 to 6: contain the MCC and MNC values of the TMGI, coded as octets 6 to 8 in the subclause 10.5.6.13 of TS 24.008.
USD File Id
Contents:
File identifier of the EF5MBSUEUSD inside the DF5MBSUECONFIG containing a User Service Description (USD).
Coding:
According to TS 31.101.
Service type
NR-ARFCN List TLV
Contents:
Each NR-ARFCN is coded in 4 bytes, as specified in TS 38.101-1 and TS 38.101-2.
Unused bytes shall be set to 'FF'.
List of one or more NR-ARFCN values of MBS frequency.
Coding:
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| NR-ARFCN List Tag | '82' | M | 1 |
| Length | 4m | M | Note |
| NR-ARFCN #1 | -- | M | 4 |
| NR-ARFCN #2 | -- | O | 4 |
| ... | |||
| NR-ARFCN #m | -- | O | 4 |
|
NOTE:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
PDU Info List TLV
PDU Info List Tag:
| Description | Tag Value |
|---|---|
| PDU Info List data object Tag | 'A1' |
PDU Info List information
Contents:
As described in TS 24.575, PDU session-specific information which consists of DNN and S-NSSAI pair for a PDU session that can be used to join MBS multicast session(s).
Each PDU session-specific information is defined as:
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| PDU Info List Tag | 'A1' | M | 1 |
| Length | L0 | M | Note |
| PDU session-specific information #1 | M | ||
| PDU session-specific information #2 | O | ||
| … | |||
| PDU session-specific information #n | O | ||
|
NOTE:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
| Description | Value | M/O | Length (bytes) |
|---|---|---|---|
| DNN Tag | '83' | M | 1 |
| DNN Length | L1 | M | Note |
| DNN value | -- | M | L1 value |
| S-NSSAI Tag | '84' | M | 1 |
| S-NSSAI Length | L2 | M | Note |
| S-NSSAI value | - | M | L2 value |
DNN Tag '83'
Contents:
DNN length. provides the length of DNN value.
DNN value is the DNN value of one PDU session associated with an MBS session.
Coding:
Each DNN value contains an APN which is encoded as defined in subclause 9A of TS 23.003.
S-NSSAI Tag '84'
Contents:
S-NSSAI length provides the length of S-NSSAI value.
S-NSSAI value is the S-NSSAI value of one PDU session associated with an MBS session.
Coding:
The coding of the S-NSSAI is defined in subclause 28.4.2 of TS 23.003.
Unused bytes shall be set to 'FF'.
4.4.14.3 EF5MBSUSD (5MBS User Service Description) p. 250
This file contains the User Service Description (USD) associated with one or more entries in the EF5MBSUECONFIG.
Multiple EF5MBSUSD files may exist in the DF, each one associated with a different entry in EF5MBSUECONFIG.
The ME retrieves this file identifier from the EF5MBSUECONFIG.
| Identifier: '4FXX' | Structure: transparent | Optional |
| ≥ L bytes | Update activity: low | ||||||||
Access Conditions:
| |||||||||
| Bytes | Description | M/O | Length |
|---|---|---|---|
| 1 to L | USD TLV data object | M | L bytes |
USD TLV data object
| Description | Value | M/O/C | Length (bytes) |
|---|---|---|---|
| USD tag | '80' | M | 1 |
| Length | X | M | Note |
| USD | -- | M | X |
|
NOTE:
The length is coded according to ISO/IEC 8825-1 [35].
|
|||
USD
Contents:
User Service Description (USD).
Coding:
According to clause J.1 of TS 26.346.
Unused bytes shall be set to 'FF'.
The identifier '4FXX' shall be different from one 5MBS User Service Description file to another. For the range of 'XX', see TS 31.101. The value of 'XX' shall be greater than 7. The length Z may be different from one 5MBS User Service Description file to another.
