Content for TS 38.133 Word version: 17.4.0
5 SA: RRC_INACTIVE state mobility
5.1 Cell Re-selection
5.1A Cell Re-selection with CCA
5.3 Minimization of Drive Tests (MDT)
5.4 Idle Mode CA/DC Measurements
...
...
5 SA: RRC_INACTIVE state mobility p. 81
5.1 Cell Re-selection p. 81
5.1.1 Introduction p. 81
5.1.2 Requirements p. 81
5.1.2.1 UE measurement capability p. 81
5.1.2.2 Measurement and evaluation of serving cell p. 81
5.1.2.3 Measurements of intra-frequency NR cells p. 81
5.1.2.4 Measurements of inter-frequency NR cells p. 81
5.1.2.5 Measurements of inter-RAT E-UTRAN cells p. 81
5.1.2.6 Maximum interruption in paging reception p. 81
5.1.2.7 General requirements p. 81
5.1A Cell Re-selection with CCA p. 81
5.1A.1 Introduction p. 81
5.1A.2 Requirements p. 82
5.1A.2.1 UE measurement capability p. 82
5.1A.2.2 Measurement and evaluation when CCA is used on the serving cell p. 82
5.1A.2.3 Measurements of intra-frequency NR cells when CCA is used on the serving cell and target cell p. 82
5.1A.2.4 Measurements of inter-frequency NR cells when CCA is used on the target cell p. 82
5.1A.2.5 Measurements of inter-RAT E-UTRAN cells when CCA is used on the serving cell p. 82
5.1A.2.6 Maximum interruption in paging reception when CCA is used on the target cell p. 82
5.1A.2.7 General requirements p. 82
5.2 Void
5.3 Minimization of Drive Tests (MDT) p. 82
5.3.1 Introduction p. 82
5.3.2 Measurement Requirements p. 83
5.3.3 Requirements for Relative Time Stamp Accuracy p. 83
5.3.4 Requirements for Relative Time Stamp Accuracy for RRC Connection Establishment Failure Log Reporting p. 83
5.3.5 Requirements for Relative Time Stamp Accuracy for Radio Link Failure and Handover Failure Log Reporting p. 83
5.3.6 Requirements for Relative Time Stamp Accuracy for RRC Resume Failure Log Reporting p. 83
5.4 Idle Mode CA/DC Measurements p. 83
5.4.1 Introduction p. 83
5.4.2 Measurement Requirements p. 83
