Content for TS 38.101-1 Word version: 18.4.0
5.2B Operating bands for DC
5.2C Operating band combination for SUL
5.2D Operating bands for UL MIMO
5.2E Operating band for V2X
5.2E.1 V2X operating bands
5.2E.1A Sidelink CA operating bands
5.2E.1F Operating bands for Sidelink Unlicensed
5.2E.2 V2X operating bands for con-current operation
5.2E.2F Operating bands for SL-U con-current operation
5.2J Operating band for ATG
5.2K Operating bands for Aerial UE
...
...
5.2B Operating bands for DC p. 51
The operating bands are specified in clause 5.5B for operation with NR dual connectivity configured, where all operating bands are within FR1.
If the mandatory simultaneous Rx/Tx capability applies for a band combination, the mandatory simultaneous Rx/Tx capability also applies for the band combination when the applicable band combination is a subset of a higher order band combination.
5.2C Operating band combination for SUL p. 51
NR operation is designed to operate in the operating band combination defined in Table 5.2C-1, Table 5.2C-2, Table 5.2C-3 and Table 5.2C-4, where all operating bands are within FR1.
If the mandatory simultaneous Rx/Tx capability applies for a band combination, when the applicable lower order band combination is a band pair in a higher order band combination, the mandatory simultaneous Rx/Tx capability also applies for the band pair in the higher order band combination.
| NR Band combination for SUL | NR Band (Table 5.2-1) |
|---|---|
| SUL_n1-n80 2 | n1, n80 |
| SUL_n1-n81 2 | n1, n81 |
| SUL_n1-n89 2 | n1, n89 |
| SUL_n3-n84 2 | n3, n84 |
| SUL_n24-n99 2 | n24, n99 |
| SUL_n41-n80 2 | n41, n80 |
| SUL_n41-n81 2 | n41, n81 |
| SUL_n41-n83 2 | n41, n83 |
| SUL_n41-n95 2 | n41, n95 |
| SUL_n41-n97 2 | n41, n97 |
| SUL_n41-n98 2 | n41, n98 |
| SUL_n41-n99 2 | n41, n99 |
| SUL_n48-n99 2 | n48, n99 |
| SUL_n77-n80 2 | n77, n80 |
| SUL_n77-n84 2 | n77, n84 |
| SUL_n77-n99 2 | n77, n99 |
| SUL_n78-n80 2 | n78, n80 |
| SUL_n78-n81 2 | n78, n81 |
| SUL_n78-n82 2 | n78, n82 |
| SUL_n78-n83 2 | n78, n83 |
| SUL_n78-n84 2 | n78, n84 |
| SUL_n78-n86 2 | n78, n86 |
| SUL_n78-n89 2 | n78, n89 |
| SUL_n79-n80 2 | n79, n80 |
| SUL_n79-n81 2 | n79, n81 |
| SUL_n79-n83 2 | n79, n83 |
| SUL_n79-n84 2 | n79, n84 |
| SUL_n79-n95 2 | n79, n95 |
| SUL_n79-n97 2 | n79, n97 |
| SUL_n79-n98 2 | n79, n98 |
|
NOTE 1:
If a UE is configured with both NR UL and NR SUL carriers in a cell, the switching time between NR UL carrier and NR SUL carrier is 0 us.
NOTE 2:
For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory.
|
|
| NR Band combination for SUL | NR Band (Table 5.2-1) |
|---|---|
| CA_n41(*)-n99 2 | n41, n99 |
| CA_n48(*)-n99 2 | n48, n99 |
| CA_n77(*)-n99 2 | n77, n99 |
| CA_n78(*)-n86 2 | n78, n86 |
|
NOTE 1:
If a UE is configured with both NR UL and NR SUL carriers in a cell, the switching time between NR UL carrier and NR SUL carrier is 0 us.
NOTE 2:
For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory.
NOTE 3:
The notation CA_nX(*) in this table indicates intra-band non-contiguous CA for band nX. The configurations for each band are in Table 5.5C-2.
|
|
| NR Band combination for SUL | NR Band (Table 5.2-1) |
|---|---|
| CA_n41-n80 | n41, n80 |
| CA_n41-n83 | n41, n83 |
| CA_n41-n95 | n41, n95 |
| CA_n41-n98 | n41, n98 |
| CA_n78-n80 | n78, n80 |
| CA_n78-n81 | n78, n81 |
| CA_n78-n84 | n78, n84 |
| CA_n78-n89 | n78, n89 |
| CA_n79-n80 | n79, n80 |
| CA_n79-n83 | n79, n83 |
| CA_n79-n95 | n79, n95 |
| CA_n79-n98 | n79, n98 |
|
NOTE 1:
If a UE is configured with both NR UL and NR SUL carriers in a cell, the switching time between NR UL carrier and NR SUL carrier is 0 us.
NOTE 2:
For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory.
|
|
| NR Band combination for SUL | NR Band (Table 5.2-1) |
|---|---|
| CA_n1_n78-n80 | n1, n78, n80 |
| CA_n1_n78-n81 | n1, n78, n81 |
| CA_n1_n78-n84 | n1, n78, n84 |
| CA_n3_n41-n80 | n3, n41, n80 |
| CA_n3_n78-n80 | n3, n78, n80 |
| CA_n3_n79-n80 | n3, n79, n80 |
| CA_n8_n78-n81 | n8, n78, n81 |
| CA_n28_n41-n83 | n28, n41, n83 |
| CA_n28_n79-n83 | n28, n79, n83 |
| CA_n41_n79-n80 | n41, n79, n80 |
| CA_n41_n79-n83 | n41, n79, n83 |
| CA_n41_n79-n95 | n41, n79, n95 |
| CA_n41_n79-n97 | n41, n79, n97 |
| CA_n41_n79-n98 | n41, n79, n98 |
| CA_n78_n1-n80 | n1, n78, n80 |
| CA_n78_n1-n81 | n1, n78, n81 |
| CA_n78_n1-n89 | n1, n78, n89 |
| CA_n78_n3-n84 | n3, n78, n84 |
| CA_n79_n41-n80 | n41, n79, n80 |
| CA_n79_n41-n83 | n41, n79, n83 |
| CA_n79_n41-n95 | n41, n79, n95 |
| CA_n79_n41-n97 | n41, n79, n97 |
| CA_n79_n41-n98 | n41, n79, n98 |
| CA_n28-n79_n41-n83 | n28, n41, n79, n83 |
| CA_n28-n41_n79-n83 | n28, n41, n79, n83 |
| CA_n41A-n95A_n79A-n98A | n41, n95, n79, n98 |
| CA_n41A-n98A_n79A-n95A | n41, n98, n79, n95 |
| CA_n41A-n83A_n79A-n98A | n41, n83, n79, n98 |
| CA_n41A-n83A_n79A-n95A | n41, n83, n79, n95 |
| CA_n78C_n80A-n84A | n78, n80, n84 |
| CA_n78C_n81A-n84A | n78, n81, n84 |
| CA_n78C_n84A-n89A | n78, n84, n89 |
|
NOTE 1:
If a UE is configured with a single cell consisting of a NR UL carrier and a corresponding NR SUL carrier, the switching time between NR UL carrier and the corresponding NR SUL carrier is 0 us.
NOTE 2:
For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory.
|
|
5.2D Operating bands for UL MIMO p. 53
NR is designed to support UL MIMO where all of the operating bands are in FR1 defined in Table 5.2D-1.
| NR operating band |
|---|
| n1 |
| n2 |
| n3 |
| n5 |
| n7 |
| n8 |
| n13 |
| n24 |
| n25 |
| n28 |
| n30 1 |
| n34 |
| n38 |
| n39 |
| n40 |
| n41 |
| n46 |
| n48 |
| n66 |
| n70 |
| n71 |
| n77 |
| n78 |
| n79 |
| n80 |
| n81 |
| n83 |
| n84 |
| n85 |
| n86 |
| n95 |
| n96 |
| n97 |
| n98 |
| n99 |
| n102 |
|
NOTE 1:
Uplink transmission is not allowed at this band for UE with external vehicle-mounted antennas.
NOTE 2:
Void.
|
5.2E Operating band for V2X p. 54
5.2E.1 V2X operating bands p. 54
NR V2X is designed to operate in the operating bands in FR1 defined in Table 5.2E.1-1.
| V2X Operating Band | Sidelink (SL) Transmission operating band
FUL_low – FUL_high |
Sidelink (SL) Reception operating band
FDL_low – FDL_high |
Duplex Mode | Interface |
|---|---|---|---|---|
| n14 2 | 788 MHz – 798 MHz | 788 MHz – 798 MHz | HD | PC5 |
| n38 1 | 2570 MHz – 2620 MHz | 2570 MHz – 2620 MHz | HD | PC5 |
| n47 | 5855 MHz – 5925 MHz | 5855 MHz – 5925 MHz | HD | PC5 |
| n79 | 4400 MHz – 5000 MHz | 4400 MHz – 5000 MHz | HD | PC5 |
|
NOTE 1:
When this band is used for V2X SL service, the band is exclusively used for NR V2X in particular regions.
NOTE 2:
When this band is used for public safety service, the NR band is operated with both in-coverage scenarios and out-of-coverage scenarios.
|
||||
5.2E.1A Sidelink CA operating bands p. 55
For NR sidelink intra-band CA operation is designed to operate in the operating bands in FR1 defined in Table 5.2E.1A-1.
| NR SL CA Band | NR Band | Interface |
|---|---|---|
| SL_n47 | n47 | PC5 |
5.2E.1F Operating bands for Sidelink Unlicensed p. 55
NR Sidelink is designed to operate in the unlicensed operating bands in FR1 defined in Table 5.2E.1F-1.
| NR SL-U operating band | Sidelink (SL) Transmission operating band
FUL_low – FUL_high |
Sidelink (SL) Reception operating band
FDL_low – FDL_high |
Duplex Mode | Interface |
|---|---|---|---|---|
| n46 1 | 5150 MHz – 5925 MHz | 5150 MHz – 5925 MHz | HD | PC5 |
| n96 1 | 5925 MHz – 7125 MHz | 5925 MHz – 7125 MHz | HD | PC5 |
| n102 1 | 5925 MHz – 6425 MHz | 5925 MHz – 6425 MHz | HD | PC5 |
|
NOTE 1:
Direct connection between client devices and between vehicular devices in the shared spectrum bands or portions of the shared spectrum bands is subject to country-specific conditions and can be prohibited per region-specific regulatory rules, e.g., in USA and Canada.
|
||||
5.2E.2 V2X operating bands for con-current operation p. 55
NR V2X operation is designed to operate concurrent with NR uplink/downlink on the operating bands combinations listed in Table 5.2E.2-1 and Table 5.2E.2-2.
| V2X con-current operating Band | NR or V2X Operating Band | Interface |
|---|---|---|
| V2X_n1-n47 | n1 | Uu |
| n47 | PC5 | |
| V2X_n3-n47 | n3 | Uu |
| n47 | PC5 | |
| V2X_n5-n47 | n5 | Uu |
| n47 | PC5 | |
| V2X_n8-n47 | n8 | Uu |
| n47 | PC5 | |
| V2X_n34-n47 | n34 | Uu |
| n47 | PC5 | |
| V2X_n39-n47 | n39 | Uu |
| n47 | PC5 | |
| V2X_n40-n47 | n40 | Uu |
| n47 | PC5 | |
| V2X_n41-n47 | n41 | Uu |
| n47 | PC5 | |
| V2X_n71-n47 | n71 | Uu |
| n47 | PC5 | |
| V2X_n78-n47 | n78 | Uu |
| n47 | PC5 | |
| V2X_n79-n47 | n79 | Uu |
| n47 | PC5 |
| V2X con-current operating Band | NR or V2X Operating Band | Interface |
|---|---|---|
| V2X_n79-n79 | n79 | Uu |
| n79 | PC5 |
5.2E.2F Operating bands for SL-U con-current operation p. 56
For NR SL-U inter-band con-current operation, NR sidelink in the unlicensed operating band is designed to operate concurrently with NR uplink/downlink on the operating band combinations are listed in Table 5.2E.2F-1.
| NR SL inter-band con-current operating Band | NR Operating Band | Interface |
|---|---|---|
| SL_n78-n46 | n78 | Uu |
5.2J Operating band for ATG p. 56
NR operating bands n1, n3, n34, n39, n41, n78, n79, which are defined in Table 5.2-1, can be applied for ATG operation.
5.2K Operating bands for Aerial UE p. 56
Aerial UE is designed to operate in NR operating bands as defined in Table 5.2-1, following applicable spectrum regulations, e.g. ECC Decision (22)07 [17] for CEPT countries.
