Tech-invite3GPPspaceIETFspace
21222324252627282931323334353637384‑5x

Content for  TS 33.128  Word version:  18.7.0

Top   Top   Up   Prev   Next
0…   4…   5…   5.7…   6…   6.2.2.2A…   6.2.3…   6.2.3.2.7…   6.2.3.3…   6.2.4…   6.3…   6.3.2.2A…   6.3.3…   6.3.3.2…   6.3.3.2.4…   6.3.3.2A…   7…   7.3…   7.3.3…   7.3.3.2.21…   7.3.3.2.42…   7.3.3.2.63…   7.3.4…   7.4…   7.4.3.8…   7.5…   7.6…   7.7…   7.7.4…   7.8…   7.8.4…   7.9…   7.10…   7.10.4…   7.11…   7.12…   7.13…   7.13.3…   7.13.3.4…   7.14…   7.15…   8…   A…   D…   E…   M…

 

7.3.3.2.63  Type: LADNInfop. 205
The LADNInfo type is used to report information derived from the LadnInfo type defined in clause 6.2.6.2.17 of TS 29.518.
Table 7.3.3.2.63-1 contains the details for the LADNInfo type.
Field name Type Cardi­nality Description M/C/O
lADNUTF8String1Represents the Local Access Data Network DNN.M
presencePresenceState0..1This IE shall be included when the UE presence in area of interest is reported. When present, this IE contains the status of UE presence within the Area of Interest.C
Up
7.3.3.2.64  Enumeration: AMFEventTypep. 206
The AMFEventType represents the AmfEventReport IE (clause 6.2.6.2.5 of TS 29.518) which triggered the LocationPresenceReport (clause 7.3.3.2.47).
Table 7.3.3.2.64-1 contains the details of the AMFEventType type.
Enumeration value Description
locationReport(1)Indicates that the AmfEventReport which triggered the LocationPresenceReport was the LOCATION_REPORT.
presenceInAOIReport(2)Indicates that the AmfEventReport which triggered the LocationPresenceReport was the PRESENCE_IN_AOI_REPORT.
Up
7.3.3.2.65  Enumeration: AccessTypep. 206
The AccessType indicates the access types of which the signalling or user data is transmitted.
Table 7.3.3.2.65-1 contains the details of the AccessType type.
Enumeration value Description
threeGPPAccess(1)Indicates that the access type is 3GPP.
nonThreeGPPAccess(2)Indicates that the access type is Non-3GPP .
threeGPPandNonThreeGPPAccess(3)Indicates that the access type is 3GPP and Non-3GPP.
Up
7.3.3.2.66  Enumeration: UEReachabilityp. 206
The UEReachability indicates the reachability of the UE. UEReachability is derived from the UeReachability type defined in clause 6.2.6.3.7 of TS 29.518.
Table 7.3.3.2.66-1 contains the details of the UEReachability type.
Enumeration value Description
unreachable(1)Indicates the UE is not reachable.
reachable(2)Indicates the UE is reachable for services and downlink traffic.
regulatoryOnly(3)Indicates the UE is reachable only for Regulatory Prioritized Service as the UE is in Not Allowed Areas.
Up
7.3.3.2.67  Enumeration: RMStatep. 206
The RMState indicates the registration management state of the UE. RMState is derived from the RmState type defined in clause 6.2.6.3.9 of TS 29.518.
Table 7.3.3.2.67-1 contains the details of the RMState type.
Enumeration value Description
registered(1)Indicates the UE in RM-REGISTERED state.
deregistered(2)Indicates the UE in RM-DEREGISTERED state.
Up
7.3.3.2.68  Enumeration: CMStatep. 207
The CMState indicates the connection management state of the UE. CMState is derived from the CmState type defined in clause 6.2.6.3.10 of TS 29.518.
Table 7.3.3.2.68-1 contains the details of the CMState type.
Enumeration value Description
idle(1)Indicates the UE is in CM-IDLE state.
connected(2)Indicates the UE is in CM-CONNECTED state.
Up
7.3.3.2.69  Enumeration: PresenceStatep. 207
The PresenceState indicates whether the UE is inside or outside of the area of interest (e.g presence reporting area or the LADN area), or if the presence reporting area is inactive in the serving node. PresenceState is derived from the PresenceState type defined in clause 5.4.3.20 of TS 29.571.
Table 7.3.3.2.69-1 contains the details of the PresenceState type.
Enumeration value Description
inArea(1)Indicates that the UE is inside or enters the presence reporting area.
outOfArea(2)Indicates that the UE is outside or leaves the presence reporting area.
unknown(3)Indicates it is unknown whether the UE is in the presence reporting area or not.
inactive(4)Indicates that the presence reporting area is inactive in the serving node.
Up
7.3.3.2.70  Type: FourGPositioningInfop. 207
The FourGPositioningInfo type is used to report EPS Location, The FourGPositioningInfo type is derived from the data present in the Provide Subscriber Location Answer Table defined in TS 29.172 Table 6.2.2.2.3-1.
Table 7.3.3.2.70-1 contains the details for the FourGPositioningInfo type.
Field name Type Cardi­nality Description M/C/O
locationDataLocationData1This structure is used any time information from the Provide Subscriber Location structure needs to be reported. This field is derived from the data present in the Provide Subscriber Location Answer message defined in TS 29.172 Table 6.2.2.2.3-1.M
cGICGI0..1This field shall contain the current cell location of the target UE when known by the NF. Defined in clause 4.3.1 of TS 23.003.C
sAISAI0..1This field shall contain the Service Area Identifier of the user where the user is located when known by the NF. Defined in clause 12.5 of TS 23.003.C
eSMLCCellInfoESMLCCellInfo0..1This field shall contain the current cell information of the target UE as known by E-SMLC when known by the NF. Defined in clause 7.4.57 of TS 29.172.C
gERANPositioningInfoGERANPositioningInfo0..1This field shall indicate the usage of each positioning method that was attempted to determine the location estimate, either successfully or unsuccessfully. This field is applicable only when the UE is attached to GERAN access and when the message is sent by the SGSN or the SGSN part of the combined MME/SGSN. Defined in clause 7.4.29 of TS 29.172.C
uTRANPositioningInfoUTRANPositioningInfo0..1This field shall indicate the usage of each positioning method that was attempted to determine the location estimate, either successfully or unsuccessfully. This field is applicable only when the UE is attached to UTRAN access and when the message is sent by the SGSN or the SGSN part of the combined MME/SGSN. Defined in clause 7.4.32 of TS 29.172.C
rawMLPResponseRawMLPResponse0..1 This field shall be used in the location field of the LALSReport record see clause 7.3.1.4. This field contains a copy of the unparsed XML code of the MLP Answer and Report messages. The contents of this field is described in OMA-TS-MLP-V3_5-20181211-C [20] clause 5.2.3.2.C
Up
7.3.3.2.71  Type: FourGLocationInfop. 208
The FourGLocationInfo type is derived from the data present in EPS-Location-Information type defined in clause 7.3.111 of TS 29.272 and the data present in User Location Information (ULI) IE, defined in clause 8.21 of TS 29.274.
Table 7.3.3.2.71-1 contains the details for the FourGLocationInfo type.
CHOICE Type Description
ePSLocationInformationEPSLocationInformationThis field is derived from the data present in EPS-LocationInformation type in clause 8.21 of TS 29.272.
ePSUserLocationInformationEPSUserLocationInformationThis field is derived from the data present in User Location Information (ULI) IE in clause 8.21 of TS 29.274.
Up
7.3.3.2.72  Type: CGIp. 208
The Cell Global Identification (CGI) type is used to report base station identification. The CGI type is derived from the data present in the CGI information element defined in clause 4.3.1 of TS 23.003.
Table 7.3.3.2.72-1 contains the details for the CGI type.
Field name Type Cardi­nality Description M/C/O
lAILAI1This field is derived from the Location Area Identification information element defined in clause 4.1 of TS 23.003.M
cellIDCellID1The Cell Identity that is being reported from the NF. Defined in clause 4.3.1 of TS 23.003.M
Up
7.3.3.2.73  Type: SAIp. 209
The Service Area Identifier (SAI) is used to identify an area consisting of one or more cells belonging to the same Location Area. Such an area is called a Service Area and can be used for indicating the location of a UE to the Core Network. The SAI is derived from the data present in the SAI information element defined in clause 12.5 of TS 23.003.
Table 7.3.3.2.73-1 contains the details for the SAI type.
Field name Type Cardi­nality Description M/C/O
pLMNIDPLMNID1The PLMN Identity of the service area being reported.M
lACLAC1The Location Area Code of the service area being reported.M
sACSAC1The Service Area Code of the service area being reported.M
Up
7.3.3.2.74  Type: ESMLCCellInfop. 209
The ESMLCCelInfo type is used to identify the current cell information of the target UE as known by E-SMLC. Derived from the information found in TS 29.172 Table 6.2.2.2.3-1.
Table 7.3.3.2.74-1 contains the details for the ESMLCCellInfo type.
Field name Type Cardi­nality Description M/C/O
eCGIECGI1ECGI type is used to report the E-UTRA Cell Identity.M
cellPortionIDCellPortionID1The current Cell Portion location of the target UE.M
Up
7.3.3.2.75  Type: GERANPositioningInfop. 209
The GERANPositioningInfo type is used to indicate the usage of each positioning method that was attempted to determine the location estimate, either successfully or unsuccessfully. This Information Element is applicable only when the UE is attached to GERAN access and when the message is sent by the SGSN or combined MME/SGSN. Derived from the data found in clause 7.4.29 of TS 29.172.
Table 7.3.3.2.75-1 contains the details for the GERANPositioningInfo type.
Field name Type Cardi­nality Description M/C/O
gERANPositioningDataGERANPositioningData0..1 Shall contain the encoded content of the "GERAN-Positioning-Data" in the "GERAN-Positioning-Info" parameter. Defined in clause 7.4.30 of TS 29.172. C
gERANGANSSPositioningDataGERANGANSSPositioningData0..1 Shall contain the encoded content of the "GERAN-GANSS-Positioning-Data" in the "GERAN-Positioning-Info" parameter. Defined in clause 7.4.31 of TS 29.172. C
Up
7.3.3.2.76  Type: UTRANPositioningInfop. 210
The UTRANPositioningInfo type is used to indicate the usage of each positioning method that was attempted to determine the location estimate, either successfully or unsuccessfully. This Information Element is applicable only when the UE is attached to UTRAN access and when the message is sent by the SGSN or the SGSN part of the combined MME/SGSN. Derived from the data found in clause 7.4.32 of TS 29.172.
Table 7.3.3.2.76-1 contains the details for the UTRANPositioningInfo type.
Field name Type Cardi­nality Description M/C/O
uTRANPositioningDataUTRANPositioningData0..1 Shall contain the encoded content of the "UTRAN-Positioning-Data" in the "UTRAN-Positioning-Info" parameter. Defined in clause 7.4.33 of TS 29.172. C
uTRANGANSSPositioningDataUTRANGANSSPositioningData0..1 Shall contain the encoded content of the "UTRAN-GANSS-Positioning-Data" only, included in the "UTRAN-Positioning-Info" parameter. Defined in clause 7.4.34 of TS 29.172. C
uTRANAdditionalPositioningDataUTRANAdditionalPositioningData0..1 Contains the "UTRAN-Additional-Positioning-Data" included in the "UTRAN-Positioning-Info" parameter. Defined in clause 7.4.63 of TS 29.172. C
Up
7.3.3.2.77  Type: EPSLocationInformationp. 210
The EPSLocationInformation type contains the information related to the user location relevant for EPS. Derived from the data found in EPS-Location-Information parameter from clause 7.3.111 of TS 29.272.
Table 7.3.3.2.77-1 contains the details for the EPSLocationInformation type.
Field name Type Cardi­nality Description M/C/O
mMELocationInformationMMELocationInformation0..1 Shall contain the information related to the user location relevant for the MME included in the "EPS-Location-Information" parameter. Defined in clause 7.3.115 of TS 29.272. C
sGSNLocationInformationSGSNLocationInformation0..1 Shall contain the information related to the user location relevant for the SGSN included in the "EPS-Location-Information" parameter. Defined in clause 7.3.116 of TS 29.272. C
Up
7.3.3.2.78  Type: MMELocationInformationp. 210
The MMELocationInformation type contains the information related to the user location relevant for the MME. Derived from the data found in MME-Location-Information parameter from clause 7.3.115 of TS 29.272.
Table 7.3.3.2.78-1 contains the details for the MMELocationInformation type.
Field name Type Cardi­nality Description M/C/O
eCGIECGI0..1Shall contain the E-UTRA Cell Identity when known at the NF.C
tAITAI0..1Shall contain the Tracking Area Identity when known at the NF.C
geographicalInformationGeographicalInformationOctet0..1Shall contain the geographical Information of the target when known at the NF.C
geodeticInformationGeodeticInformationOctet0..1Shall contain the Geodetic Location of the target when known at the NF.C
currentLocationRetrievedBOOLEAN0..1This value is used when location information was obtained after a successful paging procedure for Active Location Retrieval. Or after retrieving the most up-to-date location information from the eNB when the UE is in connected mode.C
ageOfLocationInformationINTEGER0..1The value represents the elapsed time in minutes since the last network contact of the mobile station.
Value "0" indicates that the location information was obtained after a successful paging procedure for Active Location Retrieval when the UE is in idle mode or after a successful location reporting procedure with the eNB when the UE is in connected mode.
Any other value than "0" indicates that the location information is the last known one. Shall be present if known at the NF where the POI is located.
C
userCSGInformationUserCSGInformation0..1The UserCSGInformation type holds the user Closed Subscriber Group information associated to CSG cell access. Shall be present if known at the NF.C
eNbIDeNbID0..1This field shall contain the identifier of the eNB in which the UE is currently located.C
additionalCellIDsSEQUENCE OF CellInformation0..1This parameter shall be present if the NF has additional cell information for the UE. Shall be used whenever Dual Connectivity is activated or whenever secondary cell information is available at the NF where the POI is located.C
Up
7.3.3.2.79  Type: SGSNLocationInformationp. 211
The SGSNLocationInformation type contains the information related to the user location relevant for the MME. Derived from the data found in MME-Location-Information parameter from clause 7.3.115 of TS 29.272.
Table 7.3.3.2.79-1 contains the details for the SGSNLocationInformation type.
Field name Type Cardi­nality Description M/C/O
cGICGI0..1The Cell Global Identification for the UTRA Cell the UE is currently located in. Shall be present if known at the NF where the POI is located.C
lAILAI0..1This field is derived from the Location Area Identification information element. Shall be present if known at the NF where the POI is located.C
sAISAI0..1Service Area Identity of the target.
Shall be present if known at the NF where the POI is located.
C
rAIRAI0..1Routing Area Identity of the target. Shall be present if known at the NF where the POI is located.C
geographicalInformationGeographicalInformationOctet0..1Shall contain the geographical Information of the target when known at the NF where the POI is located.C
geodeticInformationGeodeticInformationOctet0..1Shall contain the Geodetic Location of the target when known at the NF where the POI is located.C
currentLocationRetrievedBOOLEAN0..1This value is used when location information was obtained after a successful paging procedure for Active Location Retrieval. Or after retrieving the most up-to-date location information from the eNB when the UE is in connected mode.C
ageOfLocationInformationINTEGER0..1The value represents the elapsed time in minutes since the last network contact of the mobile station.
Value "0" indicates that the location information was obtained after a successful paging procedure for Active Location Retrieval when the UE is in idle mode or after a successful location reporting procedure with the eNB when the UE is in connected mode.
Any other value than "0" indicates that the location information is the last known one. Shall be present if known at the NF where the POI is located.
C
userCSGInformationUserCSGInformation0..1 The UserCSGInformation type holds the user "Closed Subscriber Group" information associated to CSG cell access. Shall be present if known at the NF where the POI is located. C
Up
7.3.3.2.80  Type: UserCSGInformationp. 212
The UserCSGInformation type holds the user "Closed Subscriber Group" information associated to CSG cell access: it comprises CSG ID within the PLMN, access mode and indication on CSG membership for the user when hybrid access applies. Derived from the data found in User-CSG-Information parameter from clause 7.2.240a of TS 32.299.
Table 7.3.3.2.80-1 contains the details for the UserCSGInformation type.
Field name Type Cardi­nality Description M/C/O
cSGIDCSGID1Represends the Closed Subscriber Group Identity.M
cSGAccessModeCSGAccessMode1Represents the CSG access mode that the UE is using.M
cSGMembershipIndicationCSGMembershipIndication1Indicates the UE membership state for the reported CSG.M
Up
7.3.3.2.81  Type: LAIp. 212
The LAI type is composed of the PLMNID and the Location Area Code. LAI is derived from the data found in LAI parameter from clause 4.1 of TS 23.003.
Table 7.3.3.2.81-1 contains the details for the LAI type.
Field name Type Cardi­nality Description M/C/O
pLMNIDPLMNID1The PLMN Identity of the location area being reported.M
lACLAC1Location Area Code of the location area being reported.M
Up
7.3.3.2.82  Type: RAIp. 213
The RAI type is composed of the PLMNID and the Location Area Code and the Routing Area Code. RAI is derived from the data found in RAI parameter from clause 4.2 of TS 23.003.
Table 7.3.3.2.82-1 contains the details for the RAI type.
Field name Type Cardi­nality Description M/C/O
pLMNIDPLMNID1The PLMN Identity of the location area being reported.M
lACLAC1Location Area Code of the location area being reported.M
rACRAC1Routing Area Code identifying a routing area within a location areaM
Up
7.3.3.2.83  Enumeration: CSGAccessModep. 213
The CSGAccessMode indicates the mode in which the CSG cell User is accessing to operate. CSGAccessMode is derived from the CSG-Access-Mode type defined in clause 7.2.46A of TS 32.299.
Table 7.3.3.2.83-1 contains the details of the CSGAccessMode type.
Enumeration value Description
closeMode(1)CSG Access mode is closed.
hybridMode(2)CSG Access mode is hybrid.
Up
7.3.3.2.84  Enumeration: CSGMembershipIndicationp. 213
The CSGMemebershipIndication indicates the UE is a member of the accessing CSG cell. CSGMemebershipIndication is derived from the CSG-Membership-Indication type defined in clause 7.2.46B of TS 32.299.
Table 7.3.3.2.84-1 contains the details of the CSGMembershipIndication type.
Enumeration value Description
notCSGMember(1)UE is not a member of the reported CSG.
cSGMember(2)UE is a member of the reported CSG.
Up

7.3.3.3  Reference datump. 213

When the reference datum used for a latitude and longitude given in the GeographicalCoordinates structure is known by the operator, the reference datum shall be identified in the mapDatumInformation field. The reference datum identity shall be specified as an Open Geospatial Consortium URN, as defined in OGC 05-010 [35].

Up   Top   ToC