Content for TS 38.176-1 Word version: 18.2.0
1 Scope p. 15
The present document establishes the minimum RF characteristics and minimum performance requirements of NR Integrated access and backhaul (IAB).
The present document specifies the Radio Frequency (RF) test methods and conformance requirements for NR Integrated access and backhaul (IAB) type 1-H. These have been derived from, and are consistent with the conducted requirements for NR Integrated access and backhaul (IAB) type 1-H in NR Integrated access and backhaul specification defined in TS 38.174.
An IAB type 1-H has both conducted and radiated requirements so it requires compliance to the applicable requirements of the present document and TS 38.176-2.
IAB type 1-O and IAB type 2-O have only radiated requirements so they require compliance to TS 38.176-2 only.
2 References p. 15
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 38.174: "NR Integrated access and backhaul radio transmission and reception".
[3]
TS 38.176-2: " NR; Integrated Access and Backhaul (IAB) conformance testing; Part 2: Radiated conformance testing".
[4]
Recommendation ITU-R M.1545: "Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000".
[5]
Recommendation ITU-R SM.329: "Unwanted emissions in the spurious domain".
[6]
Recommendation ITU-R SM.328: "Spectra and bandwidth of emissions".
[7]
"Title 47 of the Code of Federal Regulations (CFR)", Federal Communications Commission.
[8]
TR 25.942: "RF system scenarios"
[9]
TS 38.211: "NR; Physical channels and modulation"
[10]
TS 38.212: "NR; Multiplexing and channel coding"
[11]
TS 38.104: "NR Base Station (BS) radio transmission and reception"
[12]
TS 38.213: "NR; Physical layer procedures for control".
[13]
TS 38.141-1: "NR; Base Station (BS) conformance testing; Part 1: Conducted conformance testing".
[14]
TS 38.331: "NR; Radio Resource Control (RRC); Protocol specification".
[15]
Recommendation ITU-T O.150, "Equipment for the measurement of digital and analogue/digital parameters"
[16]
TS 38.521-1: "NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Range 1 Standalone".
[17]
IEC 60 721-3-3: "Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weather protected locations"
[18]
IEC 60 721-3-4: "Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Clause 4: Stationary use at non-weather protected locations"
[19]
IEC 60 721: "Classification of environmental conditions"
[20]
IEC 60 068-2-1 (2007): "Environmental testing - Part 2: Tests. Tests A: Cold"
[21]
IEC 60 068-2-2: (2007): "Environmental testing - Part 2: Tests. Tests B: Dry heat"
[22]
IEC 60 068-2-6: (2007): "Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)"
[23]
TS 38.101-1: "NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone"
[24]
TS 38.214: "NR; Physical layer procedures for data"
[25]
TR 38.901: "Study on channel model for frequencies from 0.5 to 100 GHz"
