Content for TS 38.104 Word version: 18.3.0
A Reference measurement channels
B Error Vector Magnitude (FR1)
C Error Vector Magnitude (FR2)
D Characteristics of the interfering signals
F Relationship between EIRP based regulatory requirements and 3GPP requirements
G Propagation conditions
$ Change history
A (Normative) Reference measurement channels p. 312
A.1 Fixed Reference Channels for reference sensitivity level, ACS, in-band blocking, out-of-band blocking, receiver intermodulation and in-channel selectivity (QPSK, R=1/3) p. 312
A.2 Fixed Reference Channels for dynamic range (16QAM, R=2/3) p. 315
A.3 Fixed Reference Channels for performance requirements (QPSK, R=193/1024) p. 317
A.3A Fixed Reference Channels for performance requirements (QPSK, R=99/1024) |R16| p. 324
A.3B Fixed Reference Channels for performance requirements (QPSK, R=308/1024) |R16| p. 326
A.4 Fixed Reference Channels for performance requirements (16QAM, R=658/1024) p. 330
A.5 Fixed Reference Channels for performance requirements (64QAM, R=567/1024) p. 335
A.6 PRACH Test preambles p. 338
A.7 Fixed Reference Channels for performance requirements (16QAM, R=434/1024) |R16| p. 339
A.8 Fixed Reference Channels for performance requirements (QPSK, R=157/1024) |R16| p. 341
A.9 Fixed Reference Channels for performance requirements (256QAM, R=682.5/1024) |R17| p. 342
A.10 Fixed Reference Channels for performance requirements (64QAM, R=517/1024) |R17| p. 343
B (Normative) Error Vector Magnitude (FR1) p. 347
B.1 Reference point for measurement p. 347
B.2 Basic unit of measurement p. 347
B.3 Modified signal under test p. 348
B.4 Estimation of frequency offset p. 348
B.5 Estimation of time offset p. 348
B.5.1 General p. 348
B.5.2 Window length p. 349
B.6 Estimation of TX chain amplitude and frequency response parameters p. 350
B.7 Averaged EVM p. 352
C (Normative) Error Vector Magnitude (FR2) p. 354
C.1 Reference point for measurement p. 354
C.2 Basic unit of measurement p. 354
C.3 Modified signal under test p. 355
C.4 Estimation of frequency offset p. 355
C.5 Estimation of time offset p. 355
C.5.1 General p. 355
C.5.2 Window length p. 356
C.6 Estimation of TX chain amplitude and frequency response parameters p. 357
C.7 Averaged EVM p. 359
D (Normative) Characteristics of the interfering signals p. 361
E Void
F (Normative) Relationship between EIRP based regulatory requirements and 3GPP requirements p. 363
F.1 General p. 363
F.2 Relationship between EIRP based regulatory requirements and conducted requirements p. 363
F.3 Relationship between EIRP based regulatory requirements and OTA requirements p. 364
G (Normative) Propagation conditions p. 365
G.1 Static propagation condition p. 365
G.2 Multi-path fading propagation conditions p. 365
G.2.1 Delay profiles p. 365
G.2.1.1 Delay profiles for FR1 p. 366
G.2.1.2 Delay profiles for FR2 p. 367
G.2.2 Combinations of channel model parameters p. 369
G.2.3 MIMO Channel Correlation Matrices p. 370
G.2.3.1 MIMO Correlation Matrices using Uniform Linear Array (ULA) p. 370
G.2.3.1.1 Definition of MIMO Correlation Matrices p. 370
G.2.3.1.2 MIMO Correlation Matrices at High, Medium and Low Level p. 374
G.2.3.2 Multi-Antenna channel models using cross polarized antennas p. 376
G.2.3.2.1 Definition of MIMO Correlation Matrices using cross polarized antennas p. 377
G.2.3.2.2 Spatial Correlation Matrices at UE and gNB sides p. 377
G.2.3.2.2.1 Spatial Correlation Matrices at UE side p. 377
G.2.3.2.2.2 Spatial Correlation Matrices at gNB side p. 378
G.2.3.2.3 MIMO Correlation Matrices using cross polarized antennas p. 378
G.3 High speed train condition |R16| p. 378
G.4 Moving propagation conditions |R16| p. 383
$ Change history p. 385
