Content for TS 38.104 Word version: 17.4.0
A Reference measurement channels
B Error Vector Magnitude (FR1)
C Error Vector Magnitude (FR2)
D Characteristics of the interfering signals
F Relationship between EIRP based regulatory requirements and 3GPP requirements
G Propagation conditions
$ Change history
A (Normative) Reference measurement channels Word‑p. 255
A.1 Fixed Reference Channels for reference sensitivity level, ACS, in-band blocking, out-of-band blocking, receiver intermodulation and in-channel selectivity (QPSK, R=1/3) Word‑p. 255
A.2 Fixed Reference Channels for dynamic range (16QAM, R=2/3) Word‑p. 257
A.3 Fixed Reference Channels for performance requirements (QPSK, R=193/1024) Word‑p. 259
A.3A Fixed Reference Channels for performance requirements (QPSK, R=99/1024) |R16| Word‑p. 265
A.3B Fixed Reference Channels for performance requirements (QPSK, R=308/1024) |R16| Word‑p. 267
A.4 Fixed Reference Channels for performance requirements (16QAM, R=658/1024) Word‑p. 268
A.5 Fixed Reference Channels for performance requirements (64QAM, R=567/1024) Word‑p. 272
A.6 PRACH Test preambles Word‑p. 275
A.7 Fixed Reference Channels for performance requirements (16QAM, R=434/1024) |R16| Word‑p. 276
A.8 Fixed Reference Channels for performance requirements (QPSK, R=157/1024) |R16| Word‑p. 277
B (Normative) Error Vector Magnitude (FR1) Word‑p. 279
B.1 Reference point for measurement Word‑p. 279
B.2 Basic unit of measurement Word‑p. 279
B.3 Modified signal under test Word‑p. 280
B.4 Estimation of frequency offset Word‑p. 280
B.5 Estimation of time offset Word‑p. 280
B.5.1 General Word‑p. 280
B.5.2 Window length Word‑p. 281
B.6 Estimation of TX chain amplitude and frequency response parameters Word‑p. 282
B.7 Averaged EVM Word‑p. 284
C (Normative) Error Vector Magnitude (FR2) Word‑p. 286
C.1 Reference point for measurement Word‑p. 286
C.2 Basic unit of measurement Word‑p. 286
C.3 Modified signal under test Word‑p. 287
C.4 Estimation of frequency offset Word‑p. 287
C.5 Estimation of time offset Word‑p. 287
C.5.1 General Word‑p. 287
C.5.2 Window length Word‑p. 288
C.6 Estimation of TX chain amplitude and frequency response parameters Word‑p. 288
C.7 Averaged EVM Word‑p. 290
D (Normative) Characteristics of the interfering signals Word‑p. 292
E Void
F (Normative) Relationship between EIRP based regulatory requirements and 3GPP requirements Word‑p. 294
F.1 General Word‑p. 294
F.2 Relationship between EIRP based regulatory requirements and conducted requirements Word‑p. 294
F.3 Relationship between EIRP based regulatory requirements and OTA requirements Word‑p. 295
G (Normative) Propagation conditions Word‑p. 296
G.1 Static propagation condition Word‑p. 296
G.2 Multi-path fading propagation conditions Word‑p. 296
G.2.1 Delay profiles Word‑p. 296
G.2.1.1 Delay profiles for FR1 Word‑p. 297
G.2.1.2 Delay profiles for FR2 Word‑p. 298
G.2.2 Combinations of channel model parameters Word‑p. 299
G.2.3 MIMO Channel Correlation Matrices Word‑p. 300
G.2.3.1 MIMO Correlation Matrices using Uniform Linear Array (ULA) Word‑p. 300
G.2.3.1.1 Definition of MIMO Correlation Matrices Word‑p. 300
G.2.3.1.2 MIMO Correlation Matrices at High, Medium and Low Level Word‑p. 304
G.2.3.2 Multi-Antenna channel models using cross polarized antennas Word‑p. 306
G.2.3.2.1 Definition of MIMO Correlation Matrices using cross polarized antennas Word‑p. 307
G.2.3.2.2 Spatial Correlation Matrices at UE and gNB sides Word‑p. 307
G.2.3.2.2.1 Spatial Correlation Matrices at UE side Word‑p. 307
G.2.3.2.2.2 Spatial Correlation Matrices at gNB side Word‑p. 308
G.2.3.2.3 MIMO Correlation Matrices using cross polarized antennas Word‑p. 308
G.3 High speed train condition |R16| Word‑p. 308
G.4 Moving propagation conditions |R16| Word‑p. 312
$ Change history Word‑p. 314
