Tech-invite3GPPspecsSIPRFCs
Overview21222324252627282931323334353637384‑5x

Content for  TS 23.008  Word version:  16.3.0

Top   Top   Up   Prev   Next
0…   2…   2.3…   2.4…   2.5…   2.8…   2.10…   2.13…   2.13.50…   2.13.100…   2.13.150…   2.14…   2.16…   2.22…   2.23…   2.25…   3…   3.2…   3.4…   3.10…   3.13…   3.14…   3.15…   4…   5.1   5.2   5.2A   5.2B   5.3   5.4…   5.6…   5.8…   5.10…

 

3.14  Architecture Enhancements for Service Exposure (AESE) |R13|

3.14.1  General

Following clauses describe the data that are defined on a per user basis and are related to Architecture Enhancements for Service Exposure (AESE).

3.14.2  SCEF-Reference-ID

SCEF-Reference-ID is defined in TS 29.336.
SCEF-Reference-ID is used to uniquely identify an event created by an SCEF.
SCEF-Reference-ID is temporary data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.3  SCEF-ID

SCEF-ID is defined in TS 29.336.
SCEF-ID is used to uniquely identify an SCEF.
SCEF-ID is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.4  Monitoring-Type

Monitoring-Type is defined in TS 29.336.
Monitoring-Type is used to identify type the event to be monitored.
Monitoring-Type is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.5  Maximum-Number-of-Reports

Maximum-Number-of-Reports is defined in TS 29.336.
Maximum-Number-of-Reports is used to indicate the number of reports to be delivered to the SCEF.
Maximum-Number-of-Reports is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.6  UE-Reachability-Configuration

UE-Reachability-Configuration number is defined in TS 29.336.
UE-Reachability-Configuration contain details for configuration for UE reachability.
UE-Reachability-Configuration is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.7  Monitoring-DurationWord‑p. 111
Monitoring-Duration is defined in TS 29.336.
Monitoring-Duration indicates the time for which the SCEF request to perform the monitoring.
Monitoring-Duration is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.8  Maximum-Detection-Time

Maximum-Detection-Time is defined in TS 29.336.
Maximum-Detection-Time contains the maximum number of time without any communication with the UE after which the SCEF is to be informed that the UE is considered to be unreachable.
Maximum-Detection-Time is permanent data conditionaly stored in the SCEF and HSS.

3.14.9  Reachability-Type

Reachability-Type is defined in TS 29.336.
Reachability-Type indicates for which kind of reachability of the subscriber needs to be reported i.e. reachable for SMS or data.
Reachability-Type is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.10  Maximum-Latency

Maximum Latency is defined in TS 29.336.
Maximum Latency contains the maximum acceptable delay time for downlink data transfer.
Maximum Latency is permanent data conditionaly stored in the SCEFand HSS.

3.14.11  Maximum-Response-Time

Maximum Response Time is defined in TS 29.336.
Maximum Response Time contains the maximum time for which the UE stays reachable.
Maximum Response Time is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.12  MONTE-Location-Type

MONTE-Location-Type is defined in TS 29.336.
MONTE-Location-Type indicates how actual the location information should be.
Location-Type is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.13  Accuracy

Accuracy is defined in TS 29.336.
Accuracy is used to indicate in which form geographic location information has to be provided in the report. Accuracy is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.14  Association-TypeWord‑p. 112
Association-Type is defined in TS 29.336.
Association-Type indicates which kind (IMEI or SV) of change of the IMEI has to be reported. Association-Type is permanent data conditionaly stored in the SCEF and HSS.

3.14.15  Charged-Party

Charged-Party is defined in TS 32.299.
Charged-Party holds the address (Public User ID: SIP URI, Tel URI, etc.) of the party to be charged.
Charged-Party is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.16  Remaining-number-of-reports

Remaining number of reports is defined in TS 29.336.
Remaining number of reports holds the number of reports which are outstanding to be sent to the SCEF. Remaining number of reports is temporary data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.17  Communication Pattern set

3.14.17.1  Periodic-Communication-Indicator

Periodic-Communication-Indicator is defined in TS 29.336.
Periodic-Communication-Indicator provides information if the CP occurs periodically or on demand.
Periodic-Communication-Indicator is permanent data conditionaly stored in the SCEF, HSS and MME.

3.14.17.2  Communication-Duration-Time

Communication-duration-time is defined in TS 29.336.
Communication-duration-time contains the time in seconds of the duration of the periodic communication.
Communication-duration-time is permanent data conditionaly stored in the SCEF, HSS and MME.

3.14.17.3  Periodic-Time

Periodic-Time is defined in TS 29.336.
Periodic-Time contains the time in seconds of the interval for periodic communication.
Periodic-Time is permanent data conditionaly stored in the SCEF, HSS and MME.

3.14.17.4  Scheduled-Communication-Time

Scheduled-Communication-Time is defined in TS 29.336.
Scheduled-Communication-Time contains start and end times and repetion during a week for periodic communication.
Scheduled-Communication-Time is permanent data conditionaly stored in the SCEF, HSS and MME.

3.14.17.5  Stationary-Indication

Stationary-Indication is defined in TS 29.336.
Stationary-Indication contains the information if the subscriber is stationary or mobile.
Stationary-Indication is permanent data conditionaly stored in the SCEF, HSS and MME.

3.14.17.6  Validity-TimeWord‑p. 113
Validity-Time is defined in TS 29.336.
Validity-Time provides the expiration time at which the CP sets shall be deleteted.
Validity-Time is permanent data conditionaly stored in the SCEF, HSS and MME.

3.14.18  AESE-Subscription-Data

AESE-Subscription-Data contains details on subscription information of the allowed services such as:
  • allowed service (e.g. monitoring, CP set);
  • allowed service types (e.g. allowed Monitoring events).
AESE-Subscription-Data is permanent data conditionally stored in the HSS.

3.14.19  SCEF-Realm

SCEF-Realm is defined in TS 29.272.
SCEF-Realm is used to identify the realm of the SCEF.
SCEF-Realm is permanent data conditionaly stored in the SCEF, HSS, MME and SGSN.

3.14.20  External Identifier for Monitoring Event Configuration |R14|

The External Identifier for Monitoring Event Configuration contains an External Identifier as defined in TS 23.003 and identifies the External Identifier in the subscription that is associated to each Monitoring Event Configuration (MONTE) data instance.
The External Identifier for each Monitoring Event Configuration is permanent subscriber data and is stored in the HSS and conditionally in the SCEF, MME and SGSN.

3.14.21  External Group Identifier |R14|

The External Group Identifier contains an External Group Identifier as defined in TS 23.003.
The External Group Identifier for Monitoring Event Configuration is permanent subscriber data and is stored in the HSS and conditionally in the SCEF.

Up   Top   ToC