4  General radiated test conditions and declarations  Word‑p. 27

4.1  Measurement uncertainties and test requirements

4.1.1  General

4.1.2  Acceptable uncertainty of OTA Test System  Word‑p. 29

4.1.2.1  General

4.1.2.2  Measurement of transmitter  Word‑p. 30

4.1.2.3  Measurement of receiver  Word‑p. 33

4.1.2.4  Measurement of performance requirement  Word‑p. 36

4.1.3  Interpretation of measurement results  Word‑p. 37

4.2  Radiated requirement reference points  Word‑p. 38

4.3  Base station classes  Word‑p. 39

4.4  Regional requirements

4.5  BS configurations  Word‑p. 40

4.5.1  Transmit configurations

4.5.2  Receive configurations  Word‑p. 41

4.5.3  Power supply options  Word‑p. 42

4.5.4  BS with integrated Iuant BS modem  Word‑p. 43

4.6  Manufacturer's declarations

4.7  Test configurations  Word‑p. 53

4.7.1  General

4.7.2  Test signal configurations

4.7.2.1  Test signal used to build Test Configurations

4.7.2.2  NRTC1: Contiguous spectrum operation  Word‑p. 54

4.7.2.2.1  NRTC1 generation

4.7.2.2.2  NRTC1 power allocation

4.7.2.3  NRTC2: Contiguous CA occupied bandwidth  Word‑p. 55

4.7.2.3.1  NRTC2 generation

4.7.2.3.2  NRTC2 power allocation

4.7.2.4  NRTC3: Non-contiguous spectrum operation

4.7.2.4.1  NRTC3 generation

4.7.2.4.2  NRTC3 power allocation  Word‑p. 56

4.7.2.5  NRTC4: Multi-band test configuration for full carrier allocation

4.7.2.5.1  NRTC4 generation

4.7.2.5.2  NRTC4 power allocation  Word‑p. 57

4.7.2.6  NRTC5: Multi-band test configuration with high PSD per carrier

4.7.2.6.1  NRTC5 generation

4.7.2.6.2  NRTC5 power allocation

4.8  Applicability of requirements |R16|  Word‑p. 58

4.8.1  Requirement set applicability

4.8.2  Applicability of test configurations for single-band RIB

4.8.3  Applicability of test configurations for multi-band RIB  Word‑p. 59

4.9  RF channels and test models  Word‑p. 60

4.9.1  RF channels

4.9.2  Test models  Word‑p. 61

4.9.2.1  General

4.9.2.2  NR FR2 test models

4.9.2.2.1  NR FR2 test model 1.1 (NR-FR2-TM1.1)  Word‑p. 63

4.9.2.2.2  NR FR2 test model 2 (NR-FR2-TM2)

4.9.2.2.2a  NR FR2 test model 2a (NR-FR2-TM2a) |R16|  Word‑p. 64

4.9.2.2.3  NR FR2 test model 3.1 (NR-FR2-TM3.1)

4.9.2.2.4  NR FR2 test model 3.1a (NR-FR2-TM3.1a) |R16|

4.9.2.3  Data content of physical channels and signals for NR-FR2-TM  Word‑p. 65

4.9.2.3.1  PDCCH

4.9.2.3.2  PDSCH  Word‑p. 66

4.10  Requirements for contiguous and non-contiguous spectrum  Word‑p. 67

4.11  Requirements for BS capable of multi-band operation

4.12  Co-location requirements

4.12.1  General

4.12.2  Co-location test antenna  Word‑p. 68

4.12.2.1  General

4.12.2.2  Co-location test antenna characteristics

4.12.2.3  Co-location test antenna alignment  Word‑p. 69

4.13  Format and interpretation of tests  Word‑p. 70

4.14  Reference coordinate system

5  Operating bands and channel arrangement  Word‑p. 72

---