Content for TS 38.141-2 Word version: 18.3.0
7 Radiated receiver characteristics
7.1 General
7.2 OTA sensitivity
7.3 OTA reference sensitivity level
7.4 OTA dynamic range
7.5 OTA in-band selectivity and blocking
7.6 OTA out-of-band blocking
7.7 OTA receiver spurious emissions
7.8 OTA receiver intermodulation
7.9 OTA in-channel selectivity
...
...
7 Radiated receiver characteristics p. 152
7.1 General p. 152
7.2 OTA sensitivity p. 153
7.2.1 Definition and applicability p. 153
7.2.2 Minimum requirement p. 153
7.2.3 Test Purpose p. 153
7.2.4 Method of test p. 153
7.2.4.1 Initial conditions p. 153
7.2.4.2 Procedure p. 154
7.2.5 Test requirements p. 154
7.3 OTA reference sensitivity level p. 156
7.3.1 Definition and applicability p. 156
7.3.2 Minimum requirement p. 156
7.3.3 Test Purpose p. 156
7.3.4 Method of test p. 156
7.3.4.1 Initial conditions p. 156
7.3.4.2 Procedure p. 156
7.3.5 Test requirements p. 157
7.4 OTA dynamic range p. 160
7.4.1 Definition and applicability p. 160
7.4.2 Minimum requirement p. 160
7.4.3 Test purpose p. 160
7.4.4 Method of test p. 160
7.4.4.1 Initial conditions p. 160
7.4.4.2 Procedure p. 160
7.4.5 Test requirement p. 161
7.4.5.1 General p. 161
7.4.5.2 Test requirements for BS type 1-O p. 161
7.5 OTA in-band selectivity and blocking p. 174
7.5.1 OTA adjacent channel selectivity p. 174
7.5.1.1 Definition and applicability p. 174
7.5.1.2 Minimum requirement p. 174
7.5.1.3 Test purpose p. 174
7.5.1.4 Method of test p. 174
7.5.1.4.1 Initial conditions p. 174
7.5.1.4.2 Procedure p. 174
7.5.1.5 Test requirement p. 175
7.5.2 OTA in-band blocking p. 177
7.5.2.1 Definition and applicability p. 177
7.5.2.2 Minimum requirement p. 177
7.5.2.3 Test purpose p. 177
7.5.2.4 Method of test p. 177
7.5.2.4.1 Initial conditions p. 177
7.5.2.4.2 Procedure p. 178
7.5.2.5 Test requirement p. 179
7.6 OTA out-of-band blocking p. 183
7.6.1 Definition and applicability p. 183
7.6.2 Minimum requirement p. 183
7.6.3 Test purpose p. 183
7.6.4 Method of test p. 184
7.6.4.1 Initial conditions p. 184
7.6.4.2 Procedure p. 184
7.6.5 Test requirements p. 186
7.6.5.1 Requirement for BS type 1-O p. 186
7.6.5.1.1 General p. 186
7.6.5.1.2 Co-location requirement p. 187
7.6.5.2 Requirement for BS type 2-O p. 187
7.7 OTA receiver spurious emissions p. 188
7.7.1 Definition and applicability p. 188
7.7.2 Minimum requirement p. 188
7.7.3 Test purpose p. 189
7.7.4 Method of test p. 189
7.7.4.1 Initial conditions p. 189
7.7.4.2 Procedure p. 189
7.7.5 Test requirement p. 190
7.8 OTA receiver intermodulation p. 192
7.8.1 Definition and applicability p. 192
7.8.2 Minimum requirement p. 192
7.8.3 Test purpose p. 192
7.8.4 Method of test p. 192
7.8.4.1 Initial conditions p. 192
7.8.4.2 Procedure p. 193
7.8.5 Test requirement p. 193
7.8.5.1 BS type 1-O p. 193
7.8.5.2 BS type 2-O p. 199
7.9 OTA in-channel selectivity p. 200
7.9.1 Definition and applicability p. 200
7.9.2 Minimum requirement p. 200
7.9.3 Test purpose p. 201
7.9.4 Method of test p. 201
7.9.4.1 Initial conditions p. 201
7.9.4.2 Procedure p. 201
7.9.5 Test requirement p. 202
7.9.5.1 BS type 1-O p. 202
7.9.5.2 BS type 2-O p. 207
