Content for TR 37.941 Word version: 16.2.0
2 References
3 Definitions of terms, symbols and abbreviations
4 Coordinate system
5 Conformance testing aspects
6 Measurement types
6.1 Spatial definitions
6.2 Directional measurements
6.3 TRP measurement
6.4 Co-location measurements
6.5 Requirements classification
7 OTA measurement systems
7.1 General
7.2 Indoor Anechoic Chamber
7.3 Compact Antenna Test Range
7.4 One Dimensional Compact Range
7.5 Near Field Test Range
7.6 Plane Wave Synthesizer
7.7 General chamber
7.8 Reverberation chamber
8 Measurement system calibration
...
...
2 References Word‑p. 19
3 Definitions of terms, symbols and abbreviations Word‑p. 20
4 Coordinate system Word‑p. 24
5 Conformance testing aspects Word‑p. 28
6 Measurement types Word‑p. 31
6.1 Spatial definitions
6.2 Directional measurements
6.3 TRP measurement Word‑p. 34
6.3.1 General
6.3.2 TRP measurement procedures Word‑p. 36
6.3.2.1 General
6.3.2.2 Procedures for BS output power Word‑p. 37
6.3.2.2.1 General
6.3.2.2.2 Two cuts with pattern multiplication
6.3.2.2.3 Full sphere
6.3.2.2.4 Beam-based directions
6.3.2.3 Procedures for SEM and OBUE
6.3.2.3.1 General
6.3.2.3.2 Two cuts with pattern multiplication Word‑p. 38
6.3.2.3.3 Two or three cuts
6.3.2.3.4 Full sphere
6.3.2.3.5 Beam-based directions
6.3.2.4 Procedures for ACLR
6.3.2.5 Procedures for transmitter spurious emissions and EMC emissions Word‑p. 39
6.3.3 Angular alignment in TRP measurements
6.3.4 TRP measurement grids Word‑p. 43
6.3.4.1 Spherical equal angle grid
6.3.4.2 Reference angular step criteria Word‑p. 44
6.3.4.3 Spherical equal area grids Word‑p. 48
6.3.4.4 Spherical Fibonacci grids Word‑p. 49
6.3.4.5 Orthogonal cuts grids Word‑p. 50
6.3.4.6 Wave vector space sampling grid Word‑p. 52
6.3.5 Aspects related to measurement of OTA unwanted emission Word‑p. 55
6.3.6 TRP summation error
6.4 Co-location measurements Word‑p. 57
6.5 Requirements classification
7 OTA measurement systems Word‑p. 60
7.1 General
7.2 Indoor Anechoic Chamber
7.2.1 Measurement system description, Normal test conditions
7.2.2 Measurement system description, Extreme test conditions Word‑p. 64
7.2.3 Test method limitations
7.3 Compact Antenna Test Range
7.3.1 Measurement system description, Normal test conditions
7.3.2 Measurement system description, Extreme test conditions Word‑p. 67
7.3.3 Test method limitations Word‑p. 68
7.4 One Dimensional Compact Range
7.5 Near Field Test Range Word‑p. 70
7.6 Plane Wave Synthesizer Word‑p. 71
7.7 General chamber
7.8 Reverberation chamber
8 Measurement system calibration
8.1 General
8.2 Indoor Anechoic Chamber calibration
8.3 Compact Antenna Test Range calibration Word‑p. 79
8.4 One Dimensional Test Range calibration Word‑p. 82
8.5 Near Field Test Range calibration
8.6 Plane Wave Synthesizer calibration
8.7 General chamber calibration Word‑p. 83
8.8 Reverberation chamber calibration Word‑p. 85
