Content for TR 37.812 Word version: 11.3.0
2 References
3 Definitions, symbols and abbreviations
4 General
5 MB-MSR deployment scenarios
6 Transmitter characteristics
7 Receiver characteristics
9 Test specification
$ Change History
2 References
3 Definitions, symbols and abbreviations
4 General Word‑p. 10
4.1 Work item objective
4.2 Relation to other RAN and GERAN specifications Word‑p. 11
4.3 Regional requirements Word‑p. 12
4.4 Manufacturer's declaration
4.5 Applicability of MB-MSR requirements Word‑p. 13
5 MB-MSR deployment scenarios Word‑p. 14
5.1 Definitions and terminology
5.2 Relation to legacy deployment Word‑p. 15
5.3 Application scenarios Word‑p. 16
5.4 Operating bands and Band categories Word‑p. 22
6 Transmitter characteristics Word‑p. 23
6.1 General
6.2 Base station output power Word‑p. 24
6.3 Output power dynamics
6.4 Transmit ON/OFF power
6.5 Transmitted signal quality
6.6 Unwanted emissions Word‑p. 25
6.6.1 Transmitter spurious emissions Word‑p. 26
6.6.2 Operating band unwanted emissions Word‑p. 27
6.6.3 Occupied bandwidth
6.6.4 Adjacent Channel Leakage power Ratio (ACLR)
6.7 Transmitter intermodulation
7 Receiver characteristics Word‑p. 28
7.1 General
7.2 Reference sensitivity level
7.3 Dynamic range
7.4 In-band selectivity and blocking
7.5 Out-of-band blocking Word‑p. 30
7.6 Receiver spurious emissions Word‑p. 31
7.7 Receiver intermodulation
7.8 In-channel selectivity Word‑p. 32
8 Void
9 Test specification
9.1 General
9.2 Test configurations Word‑p. 33
9.2.1 Test configurations for multi-band operation
9.2.2 Generation of MB-MSR test configurations
9.2.2.1 TC7a: MB-MSR test configuration for full carrier allocation
9.2.2.2 TC7b: MB-MSR test configuration with high PSD per carrier
9.2.2.3 TC7c: MB-MSR test configuration with GSM/EDGE single RAT operation in one band
9.2.3 RF channels
9.3 Applicability of requirements and test configurations
$ Change History Word‑p. 41
