Content for TS 37.145-1 Word version: 17.1.0
7 Conducted receiver characteristics
7.1 General
7.2 Reference sensitivity level
7.3 Dynamic range
7.4 Adjacent channel selectivity and narrowband blocking
7.5 Blocking
7.6 Receiver spurious emissions
7.7 Receiver intermodulation
7.8 In-channel selectivity
7 Conducted receiver characteristics Word‑p. 218
7.1 General
7.2 Reference sensitivity level
7.2.1 Definition and applicability
7.2.2 Minimum Requirement
7.2.3 Test Purpose Word‑p. 219
7.2.4 Method of test
7.2.5 Test Requirements Word‑p. 220
7.3 Dynamic range Word‑p. 223
7.3.1 Definition and applicability
7.3.2 Minimum requirement
7.3.3 Test purpose Word‑p. 224
7.3.4 Method of test
7.3.5 Test requirements Word‑p. 225
7.4 Adjacent channel selectivity and narrowband blocking Word‑p. 230
7.4.1 Definition and applicability
7.4.2 Minimum requirement Word‑p. 231
7.4.4 Method of test
7.4.4.1 Initial conditions
7.4.4.2 Procedure Word‑p. 232
7.4.5 Test requirements Word‑p. 234
7.4.5.1 MSR operation
7.4.5.1.1 General blocking test requirement
7.4.5.1.2 General narrowband blocking test requirement Word‑p. 235
7.4.5.1.3 Additional BC3 blocking test requirement Word‑p. 236
7.4.5.2 Single RAT UTRA FDD operation Word‑p. 237
7.4.5.3 Single RAT UTRA TDD 1,28 Mcps option operation
7.4.5.4 Single RAT E-UTRA operation Word‑p. 238
7.5 Blocking Word‑p. 240
7.5.1 Definition and applicability
7.5.2 Minimum requirement
7.5.3 Test purpose Word‑p. 241
7.5.4 Method of test
7.5.5 Test requirements
7.5.5.1 MSR operation
7.5.5.1.1 General out-of-band blocking test requirements
7.5.5.1.2 Co-location test requirements Word‑p. 244
7.5.5.2 Single RAT UTRA FDD operation Word‑p. 249
7.5.5.3 Single RAT UTRA TDD 1,28 Mcps option operation Word‑p. 267
7.5.5.3.1 General requirements
7.5.5.3.2 Co-location with GSM, DCS, UTRA FDD and/or E-UTRA FDD, UTRA TDD and/or E-UTRA TDD Word‑p. 271
7.5.5.4 Single RAT E-UTRA operation Word‑p. 275
7.6 Receiver spurious emissions Word‑p. 284
7.6.1 Definition and applicability
7.6.2 Minimum Requirement
7.6.3 Test Purpose
7.6.4 Method of test
7.6.4.1 Initial conditions
7.6.4.2 Procedure Word‑p. 285
7.6.5 Test Requirements
7.7 Receiver intermodulation Word‑p. 289
7.7.1 Definition and applicability
7.7.2 Minimum requirement
7.7.3 Test purpose Word‑p. 290
7.7.4 Method of test
7.7.5 Test requirements Word‑p. 292
7.7.5.1 MSR operation
7.7.5.1.1 General intermodulation test requirement
7.7.5.1.2 General narrowband intermodulation test requirement Word‑p. 293
7.7.5.2 Single RAT UTRA FDD operation Word‑p. 297
7.7.5.3 Single RAT UTRA TDD 1,28Mcps option operation Word‑p. 298
7.7.5.4 Single RAT E-UTRA operation Word‑p. 299
7.8 In-channel selectivity Word‑p. 302
