Content for TS 36.141 Word version: 17.0.0
A Reference Measurement channels
B Propagation conditions
C Characteristics of the interfering signals
D Environmental requirements for the BS equipment
E General rules for statistical testing
F Global In-Channel TX-Test
G Test Tolerances and Derivation of Test Requirements
H E-UTRAN Measurement Test Cases
I Measurement system set-up
J Unwanted emission requirements for multi-carrier BS
$ Change history
A (Normative) Reference Measurement channels Word‑p. 417
A.0 General
A.1 Fixed Reference Channels for reference sensitivity and in -channel selectivity (QPSK, R=1/3) Word‑p. 419
A.2 Fixed Reference Channels for dynamic range (16QAM, R=2/3)
A.3 Fixed Reference Channels for performance requirements (QPSK 1/3) Word‑p. 420
A.4 Fixed Reference Channels for performance requirements (16QAM 3/4)
A.5 Fixed Reference Channels for performance requirements (64QAM 5/6) Word‑p. 421
A.6 PRACH Test preambles
A.7 Fixed Reference Channels for UL timing adjustment (Scenario 1) Word‑p. 422
A.8 Fixed Reference Channels for UL timing adjustment (Scenario 2)
A.9 Multi user PUCCH test Word‑p. 423
A.10 PUCCH transmission on two antenna ports test |R10|
A.11 Fixed Reference Channel for PUSCH with TTI bundling and enhanced HARQ pattern |R12|
A.14 Fixed Reference Channels for NB-IOT reference sensitivity (ϖ/2 BPSK, R=1/3) |R13| Word‑p. 424
A.15 Fixed Reference Channels for NB-IoT dynamic range (ϖ/4 QPSK, R=2/3) |R13| Word‑p. 425
A.16 Fixed Reference Channels for NB-IoT NPUSCH format 1 |R13| Word‑p. 426
A.17 Fixed Reference Channels for performance requirements (256QAM 5/6) |R14|
A.18 Fixed Reference Channels for PUSCH transmission in UpPTS (16QAM 0.65) |R14| Word‑p. 427
A.19 Fixed Reference Channels for PUSCH transmission in UpPTS (256QAM 0.69) |R14|
A.20 Fixed Reference Channels for PUSCH with Frame structure type 3 |R14| Word‑p. 428
A.21 Fixed Reference Channels for performance requirements (QPSK 3/5) |R15|
A.22 Fixed Reference Channels for performance requirements (64QAM 1/2) |R15| Word‑p. 429
A.23 Fixed Reference Channel for subslot-PUSCH |R15|
A.24 Fixed Reference Channels for PUSCH with SubPRB transmission |R15| Word‑p. 430
B (Normative) Propagation conditions Word‑p. 431
B.1 Static propagation condition
B.2 Multi-path fading propagation conditions
B.3 High speed train condition Word‑p. 432
B.4 Moving propagation conditions Word‑p. 436
B.5 Multi-Antenna channel models |R10| Word‑p. 437
B.5.1 Definition of MIMO Correlation Matrices
B.5.2 MIMO Correlation Matrices at High, Medium and Low Level Word‑p. 438
B.5A Multi-Antenna channel models using cross polarized antennas |R12| Word‑p. 440
B.5A.1 Definition of MIMO Correlation Matrices using cross polarized antennas Word‑p. 441
B.5A.2 Spatial Correlation Matrices at UE and eNB sides
B.5A.2.1 Spatial Correlation Matrices at UE side
B.5A.2.2 Spatial Correlation Matrices at eNB side Word‑p. 442
B.5A.3 MIMO Correlation Matrices using cross polarized antennas
B.6 Interference model for enhanced performance requirements type A and type B |R14| Word‑p. 443
C (Normative) Characteristics of the interfering signals Word‑p. 444
D (Normative) Environmental requirements for the BS equipment Word‑p. 445
D.1 General
D.2 Normal test environment
D.3 Extreme test environment
D.4 Vibration Word‑p. 446
D.5 Power supply
D.6 Measurement of test environments
E (Normative) General rules for statistical testing Word‑p. 447
F (Normative) Global In-Channel TX-Test Word‑p. 448
F.1 General
F.2.1 Basic principle
F.2.2 Output signal of the TX under test
F.2.3 Reference signal
F.2.4 Measurement results
F.2.5 Measurement points Word‑p. 449
F.3.1 Pre FFT minimization process
F.3.2 Timing of the FFT window Word‑p. 450
F.3.3 Resource Element TX power
F.3.4 Post FFT equalisation Word‑p. 451
F.4.1 EVM Word‑p. 452
F.4.2 Averaged EVM Word‑p. 453
F.4.2.1 Averaged EVM (TDD) Word‑p. 454
G Test Tolerances and Derivation of Test Requirements Word‑p. 456
G.1 Measurement of transmitter Word‑p. 457
G.2 Measurement of receiver Word‑p. 464
G.3 Measurement of Performance Requirements Word‑p. 470
H E-UTRAN Measurement Test Cases Word‑p. 473
I Measurement system set-up Word‑p. 474
I.1 Transmitter
I.1.1 Base station output power, output power dynamics, transmitted signal quality, Frequency error, EVM, DL RS power, Unwanted emissions
I.1.2 Transmitter intermodulation
I.1.3 Time alignment error Word‑p. 475
I.1.4 Home BS output power for adjacent channel protection |R9|
I.1.5 Home BS output power for co-channel E-UTRA protection |R10|
I.2 Receiver Word‑p. 476
I.2.1 Reference sensitivity level
I.2.2 Dynamic range Word‑p. 477
I.2.3 In-channel selectivity
I.2.4 Adjacent Channel Selectivity (ACS) and narrowband blocking Word‑p. 478
I.2.5 Blocking characteristics
I.2.6 Receiver spurious emission Word‑p. 479
I.2.7 Intermodulation characteristics
I.3 Performance requirement Word‑p. 480
I.3.1 Performance requirements for PRACH in static conditions
I.3.2 Performance requirements for PUSCH, PRACH, single user PUCCH in multipath fading conditions and for High Speed Train conditions
I.3.3 Performance requirements for multi user PUCCH in multipath fading conditions Word‑p. 481
I.3.4 Performance requirement for UL timing adjustment
I.3.5 Performance requirements for PUCCH transmission on two antenna ports in multipath fading conditions |R10| Word‑p. 482
I.3.6 Performance requirements for PUSCH transmission on two antenna ports in multipath fading conditions |R10| Word‑p. 483
I.3.7 Enhanced performance requirements type A of PUSCH in multipath fading propagation conditions with synchronous or asynchronous interference |R13| Word‑p. 484
I.3.8 Enhanced performance requirement type B of PUSCH in multipath fading propagation conditions |R15| Word‑p. 488
I.4 Channel access procedures |R13|
J Unwanted emission requirements for multi-carrier BS
J.1 General
J.2 Multi-carrier BS of different E-UTRA channel bandwidths Word‑p. 489
J.3 Multi-carrier BS of E-UTRA and UTRA
$ Change history Word‑p. 490
