Content for TS 36.141 Word version: 17.0.0
6 Transmitter characteristics
6.1 General
6.2 Base station output power
6.3 Output power dynamics
6.4 Transmit ON/OFF power
6.5 Transmitted signal quality
6.5.1 Frequency error
6.5.2 Error Vector Magnitude
6.5.3 Time alignment error
6.5.4 DL RS power
6.6 Unwanted emissions
6.6.1 Occupied bandwidth
6.6.2 Adjacent Channel Leakage power Ratio (ACLR)
6.6.3 Operating band unwanted emissions
6.6.4 Transmitter spurious emissions
6.7 Transmitter intermodulation
...
...
6 Transmitter characteristics Word‑p. 80
6.1 General
6.1.1 E-UTRA Test Models
6.1.1.1 E-UTRA Test Model 1.1 (E-TM1.1)
6.1.1.2 E-UTRA Test Model 1.2 (E-TM1.2) Word‑p. 82
6.1.1.3 E-UTRA Test Model 2 (E-TM2) Word‑p. 84
6.1.1.3a E-UTRA Test Model 2a (E-TM2a) |R12| Word‑p. 87
6.1.1.3b E-UTRA Test Model 2b (E-TM2b) |R15|
6.1.1.3c E-UTRA subslot TTI Test Model 2-1 (sE-TM2-1) |R15|
6.1.1.3d E-UTRA subslot TTI Test Model 2a (sE-TM2a-1) |R15| Word‑p. 89
6.1.1.3e E-UTRA slot TTI Test Model 2-1 (sE-TM2-1) |R15|
6.1.1.3f E-UTRA slot TTI Test Model 2a (sE-TM2a-2) |R15| Word‑p. 91
6.1.1.4 E-UTRA Test Model 3.1 (E-TM3.1)
6.1.1.4a E-UTRA Test Model 3.1a (E-TM3.1a) |R12| Word‑p. 92
6.1.1.4b E-UTRA Test Model 3.1b (E-TM3.1b) |R15|
6.1.1.4c E-UTRA subslot TTI Test Model 3.1 (sE-TM3.1-1) |R15| Word‑p. 93
6.1.1.4d E-UTRA subslot TTI Test Model 3.1a (sE-TM3.1a-1) |R15| Word‑p. 94
6.1.1.4e E-UTRA slot TTI Test Model 3.1 (sE-TM3.1-2) |R15| Word‑p. 95
6.1.1.4f E-UTRA slot TTI Test Model 3.1a (sE-TM3.1a-2) |R15|
6.1.1.5 E-UTRA Test Model 3.2 (E-TM3.2) Word‑p. 96
6.1.1.5a E-UTRA subslot TTI Test Model 3.2 (sE-TM3.2-1) |R15| Word‑p. 100
6.1.1.5b E-UTRA slot TTI Test Model 3.2 (sE-TM3.2-2) |R15| Word‑p. 112
6.1.1.6 E-UTRA Test Model 3.3 (E-TM3.3) Word‑p. 124
6.1.1.6a E-UTRA subslot TTI Test Model 3.3 (sE-TM3.3-1) |R15| Word‑p. 129
6.1.1.6b E-UTRA slot TTI Test Model 3.3 (sE-TM3.3-2) |R15| Word‑p. 135
6.1.2 Data content of Physical channels and Signals for E-TM Word‑p. 142
6.1.2.1 Reference signals Word‑p. 143
6.1.2.2 Primary Synchronization signal
6.1.2.3 Secondary Synchronization signal
6.1.2.4 PBCH
6.1.2.5 PCFICH
6.1.2.6 PHICH
6.1.2.7 PDCCH Word‑p. 144
6.1.2.8 PDSCH or sPDSCH
6.1.2.9 sPDCCH |R15|
6.1.3 NB-IoT Test Model |R13| Word‑p. 145
6.1.4 Data content of Physical channels and Signals for N-TM |R13|
6.1.4.1 Reference signals Word‑p. 146
6.1.4.2 Synchronization signals
6.1.4.3 NPBCH
6.1.4.4 NPDCCH
6.1.4.5 NPDSCH
6.1.5 Test Model for NB-IoT guard band operation |R13| Word‑p. 147
6.1.6 Test Model for NB-IoT in-band operation |R13|
6.2 Base station output power
6.2.1 Definition and applicability
6.2.2 Minimum Requirement Word‑p. 148
6.2.3 Test purpose
6.2.4 Method of test
6.2.4.1 Initial conditions
6.2.4.2 Procedure Word‑p. 149
6.2.5 Test Requirements
6.2.6 Home BS output power for adjacent UTRA channel protection |R9| Word‑p. 150
6.2.6.1 Definition and applicability
6.2.6.2 Minimum Requirement Word‑p. 151
6.2.6.3 Test purpose
6.2.6.4 Method of test
6.2.6.5 Test Requirements Word‑p. 152
6.2.7 Home BS output power for adjacent E-UTRA channel protection |R9|
6.2.7.1 Definition and applicability
6.2.7.2 Minimum Requirement Word‑p. 153
6.2.7.3 Test purpose
6.2.7.4 Method of test
6.2.7.4.1 Initial conditions
6.2.7.4.2 Procedure Word‑p. 154
6.2.7.5 Test Requirements
6.2.8 Home BS output power for co-channel E-UTRA protection |R10| Word‑p. 155
6.3 Output power dynamics
6.3.1 RE Power control dynamic range
6.3.2 Total power dynamic range Word‑p. 158
6.3.2.1 Definition and applicability
6.3.2.2 Minimum Requirement
6.3.2.3 Test purpose
6.3.2.4 Method of test
6.3.2.5 Test Requirement
6.3.3 NB-IoT RB power dynamic range for in-band or guard band operation |R13| Word‑p. 159
6.4 Transmit ON/OFF power Word‑p. 160
6.4.1 Transmitter OFF power
6.4.1.1 Definition and applicability
6.4.1.2 Minimum Requirement
6.4.1.3 Test purpose
6.4.1.4 Method of test
6.4.1.5 Test requirement
6.4.2 Transmitter transient period
6.5 Transmitted signal quality
6.5.1 Frequency error
6.5.1.1 Definition and applicability
6.5.1.2 Minimum Requirement
6.5.1.3 Test purpose
6.5.1.4 Method of test
6.5.1.5 Test requirement
6.5.2 Error Vector Magnitude Word‑p. 163
6.5.2.1 Definition and applicability
6.5.2.2 Minimum Requirement
6.5.2.3 Test purpose
6.5.2.4 Method of test
6.5.2.5 Test requirement Word‑p. 164
6.5.3 Time alignment error Word‑p. 165
6.5.3.1 Definition and applicability
6.5.3.2 Minimum Requirement
6.5.3.3 Test Purpose
6.5.3.4 Method of Test
6.5.3.4.1 Initial Conditions
6.5.3.4.2 Procedure Word‑p. 166
6.5.3.5 Test Requirement
6.5.4 DL RS power Word‑p. 167
6.6 Unwanted emissions Word‑p. 168
6.6.1 Occupied bandwidth
6.6.1.1 Definition and applicability
6.6.1.2 Minimum Requirements
6.6.1.3 Test purpose
6.6.1.4 Method of test
6.6.1.4.1 Initial conditions
6.6.1.4.2 Procedure Word‑p. 169
6.6.1.5 Test requirements Word‑p. 170
6.6.2 Adjacent Channel Leakage power Ratio (ACLR)
6.6.2.1 Definition and applicability
6.6.2.2 Minimum Requirement
6.6.2.3 Test purpose Word‑p. 171
6.6.2.4 Method of test
6.6.2.5 Test Requirement Word‑p. 172
6.6.2.6 Cumulative ACLR test requirement in non-contiguous spectrum |R11| Word‑p. 174
6.6.3 Operating band unwanted emissions Word‑p. 176
6.6.3.1 Definition and applicability
6.6.3.2 Minimum Requirement Word‑p. 177
6.6.3.3 Test purpose
6.6.3.4 Method of test
6.6.3.4.1 Initial conditions
6.6.3.4.2 Procedure Word‑p. 178
6.6.3.5 Test requirement
6.6.3.5.1 Test requirements for Wide Area BS (Category A) Word‑p. 179
6.6.3.5.2 Test requirements for Wide Area BS (Category B) Word‑p. 184
6.6.3.5.2A Test requirements for Local Area BS (Category A and B) |R9| Word‑p. 190
6.6.3.5.2B Test requirements for Home BS (Category A and B) |R11| Word‑p. 193
6.6.3.5.2C Test requirements for Medium Range BS (Category A and B) |R11| Word‑p. 194
6.6.3.5.2D Minimum requirements for Local Area and Medium Range BS in Band 46 (Category A and B) |R13| Word‑p. 199
6.6.3.5.2E Minimum requirements for stand-alone NB-IoT Wide Area BS |R13| Word‑p. 200
6.6.3.5.2F Minimum requirements for stand-alone NB-IoT Local Area BS |R15| Word‑p. 201
6.6.3.5.2G Minimum requirements for stand-alone NB-IoT Home BS |R15| Word‑p. 202
6.6.3.5.2H Minimum requirements for stand-alone NB-IoT Medium Range BS |R15| Word‑p. 203
6.6.3.5.3 Additional requirements Word‑p. 204
6.6.4 Transmitter spurious emissions Word‑p. 209
6.7 Transmitter intermodulation Word‑p. 242
