Content for TS 25.142 Word version: 17.0.0
6.6 Output RF spectrum emissions p. 77
6.6.1 Occupied bandwidth p. 77
6.6.1.1 Definition and applicability p. 77
6.6.1.2 Minimum Requirements p. 77
6.6.1.2.1 3,84 Mcps TDD option |R4| p. 77
6.6.1.2.2 1,28 Mcps TDD option |R4| p. 77
6.6.1.2.3 7,68 Mcps TDD option |R7| p. 77
6.6.1.3 Test purpose p. 78
6.6.1.4 Method of test p. 78
6.6.1.4.1 Initial conditions p. 78
6.6.1.4.1.0 General test conditions p. 78
6.6.1.4.1.1 3,84 Mcps TDD option p. 78
6.6.1.4.1.2 1,28 Mcps TDD option p. 78
6.6.1.4.1.3 7,68 Mcps TDD option p. 79
6.6.1.4.2 Procedure p. 79
6.6.1.5 Test Requirements p. 80
6.6.2 Out of band emission p. 80
6.6.2.1 Spectrum emission mask p. 81
6.6.2.1.1 Definition and applicability p. 81
6.6.2.1.1.1 3,84 Mcps TDD option p. 81
6.6.2.1.1.2 1,28 Mcps TDD option p. 81
6.6.2.1.1.3 7,68 Mcps TDD option p. 81
6.6.2.1.2 Minimum Requirements p. 81
6.6.2.1.2.1 3,84 Mcps TDD option p. 81
6.6.2.1.2.2 1,28 Mcps TDD option p. 82
6.6.2.1.2.3 7,68 Mcps TDD option p. 84
6.6.2.1.3 Test purpose p. 85
6.6.2.1.4 Method of test p. 85
6.6.2.1.4.1 Initial conditions p. 85
6.6.2.1.4.2 Procedure p. 88
6.6.2.1.5 Test Requirements p. 89
6.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) p. 92
6.6.2.2.1 Definition and applicability p. 92
6.6.2.2.2 Minimum Requirements p. 92
6.6.2.2.2.1 Minimum requirement p. 92
6.6.2.2.2.2 Void
6.6.2.2.2.3 Void
6.6.2.2.3 Test purpose p. 94
6.6.2.2.4 Method of test p. 94
6.6.2.2.4.1 Initial conditions p. 94
6.6.2.2.4.2 Procedure p. 97
6.6.2.2.5 Test Requirements p. 99
6.6.3 Spurious emissions p. 100
6.6.3.1 Definition and applicability p. 100
6.6.3.2 Minimum Requirements p. 101
6.6.3.2.1 Mandatory requirements p. 101
6.6.3.2.1.1 Spurious emissions (Category A) p. 101
6.6.3.2.1.2 Spurious emissions (Category B) p. 102
6.6.3.2.2 Co-existence with GSM, DCS, UTRA and/or E-UTRA p. 103
6.6.3.2.2.1 Operation in the same geographic area p. 103
6.6.3.2.2.2 Co-located base stations p. 106
6.6.3.2.3 Void
6.6.3.2.4 Void
6.6.3.2.5 Co-existence with unsynchronised UTRA TDD and/or E-UTRA TDD p. 108
6.6.3.2.5.1 Operation in the same geographic area p. 108
6.6.3.2.5.2 Co-located base stations p. 110
6.6.3.2.6 Co-existence with PHS |R6| p. 113
6.6.3.3 Test purpose p. 114
6.6.3.3.1 3,84 Mcps TDD option |R4| p. 114
6.6.3.3.2 1,28 Mcps TDD option |R4| p. 114
6.6.3.3.3 7,68 Mcps TDD option |R7| p. 114
6.6.3.4 Method of test p. 114
6.6.3.4.1 Initial conditions p. 114
6.6.3.4.1.0 General test conditions p. 115
6.6.3.4.1.1 3,84 Mcps TDD option - General test set up p. 115
6.6.3.4.1.2 1,28 Mcps TDD option - General test set up p. 115
6.6.3.4.1.3 1,28 Mcps TDD option - Special test set up for 16QAM capable BS p. 115
6.6.3.4.1.4 3,84 Mcps TDD option - Special test set up for 16QAM capable BS p. 116
6.6.3.4.1.5 7,68 Mcps TDD option - General test set up p. 116
6.6.3.4.1.6 7,68 Mcps TDD option - Special test set up for 16QAM capable BS p. 117
6.6.3.4.2 Procedure p. 117
6.6.3.5 Test Requirements p. 117
6.7 Transmit intermodulation p. 118
6.7.1 Definition and applicability p. 118
6.7.1.1 3,84 Mcps TDD option |R4| p. 118
6.7.1.2 1,28 Mcps TDD option |R4| p. 118
6.7.1.3 7,68 Mcps TDD option |R7| p. 118
6.7.2 Minimum Requirements p. 119
6.7.3 Test purpose p. 119
6.7.4 Method of test p. 119
6.7.4.1 Initial conditions p. 119
6.7.4.1.0 General test conditions |R4| p. 119
6.7.4.1.1 3,84 Mcps TDD option - General test set up |R4| p. 119
6.7.4.1.2 1,28 Mcps TDD option - General test set up |R4| p. 120
6.7.4.1.3 1,28 Mcps TDD option - Special test set up for 16QAM capable BS |R5| p. 121
6.7.4.1.4 3,84 Mcps TDD option - Special test set up for 16QAM capable BS |R5| p. 122
6.7.4.1.5 7,68 Mcps TDD option - General test set up |R7| p. 123
6.7.4.1.6 7,68 Mcps TDD option - Special test set up for 16QAM capable BS |R7| p. 124
6.7.4.2 Procedure p. 125
6.7.5 Test Requirements p. 125
6.8 Transmit Modulation p. 125
6.8.1 Modulation accuracy p. 125
6.8.1.1 Definition and applicability p. 125
6.8.1.2 Minimum Requirements p. 126
6.8.1.3 Test purpose p. 126
6.8.1.4 Method of test p. 126
6.8.1.4.1 Initial conditions p. 126
6.8.1.4.1.0 General test conditions p. 126
6.8.1.4.1.1 3,84 Mcps TDD option - General test setup p. 126
6.8.1.4.1.2 1,28 Mcps TDD option - General test set up p. 126
6.8.1.4.1.3 1,28 Mcps TDD option - Special test set up for 16QAM capable BS p. 127
6.8.1.4.1.4 3,84 Mcps TDD option - Special test set up for 16QAM capable BS p. 127
6.8.1.4.1.5 7,68 Mcps TDD option - General test setup p. 128
6.8.1.4.1.6 7,68 Mcps TDD option - Special test set up for 16QAM capable BS p. 128
6.8.1.4.2 Procedure p. 129
6.8.1.4.2.1 3,84 Mcps TDD option - General procedure p. 129
6.8.1.4.2.2 1,28 Mcps TDD option - General procedure p. 129
6.8.1.4.2.3 1,28 Mcps TDD option - Special procedure for 16QAM capable BS p. 129
6.8.1.4.2.4 3,84 Mcps TDD option - Special test set up for 16QAM capable BS p. 130
6.8.1.4.2.5 7,68 Mcps TDD option - General procedure p. 130
6.8.1.4.2.6 7,68 Mcps TDD option - Special test set up for 16QAM capable BS p. 131
6.8.1.5 Test Requirements p. 131
6.8.2 Peak code domain error p. 131
6.8.2.1 Definition and applicability p. 131
6.8.2.2 Minimum Requirements p. 132
6.8.2.3 Test purpose p. 132
6.8.2.4 Method of test p. 132
6.8.2.4.1 Initial conditions p. 132
6.8.2.4.1.0 General test conditions p. 132
6.8.2.4.1.1 3,84 Mcps TDD option - General test set up p. 132
6.8.2.4.1.2 1,28 Mcps TDD option- General test set up p. 132
6.8.2.4.1.3 1,28 Mcps TDD option - Special test set up for 16QAM capable BS p. 133
6.8.2.4.1.4 3,84 Mcps TDD option - Special test set up for 16QAM capable BS p. 133
6.8.2.4.1.5 7,68 Mcps TDD option - General test set up p. 134
6.8.2.4.1.6 7,68 Mcps TDD option - Special test set up for 16QAM capable BS p. 134
6.8.2.4.2 Procedure p. 135
6.8.2.5 Test Requirements |R12| p. 135
6.8.3 Relative Code Domain Error |R7| p. 135
6.8.3.1 Definition and applicability p. 135
6.8.3.2 Minimum requirement p. 135
6.8.3.3 Test Purpose p. 135
6.8.3.4 Method of test p. 135
6.8.3.4.1 Initial conditions p. 135
6.8.3.4.1.0 General test conditions p. 135
6.8.3.4.1.1 1.28 Mcps TDD option- General test set up p. 135
6.8.3.4.1.2 1.28 Mcps TDD option - Special test set up for 64QAM capable BS p. 136
6.8.3.4.2 Procedure p. 136
6.8.3.5 Test Requirements p. 137
6.8.4 Time alignment error in MIMO transmission |R8| p. 137
6.8.4.1 Definition and applicability p. 137
6.8.4.2 Minimum requirement p. 137
6.8.4.3 Test Purpose p. 137
6.8.4.4 Method of test p. 137
6.8.4.4.1 Initial conditions p. 137
6.8.4.4.1.0 General test conditions p. 137
6.8.4.4.1.1 1.28 Mcps TDD option- General test set up p. 137
6.8.4.4.2 Procedure p. 138
6.8.4.5 Test Requirements p. 138
