Tech-invite 3GPPspace IETFspace

21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 4‑5x

Content for TR 45.050 Word version: 16.0.0

1… 3… A… B… E… F… J… P… R… S… T… V… VA… X… Y… Z… ZD… ZF…

S.1 Introduction S.2 Transmitter characteristics S.3 Receiver characteristics S.4 CTS-FP TI5 performance requirements S.5 Conclusion
...

S CTS system scenarios Word‑p. 191

S.1 Introduction

S.1.1 Parameter Set

S.1.1.1 Transmitter Parameter

S.1.1.2 Receiver Parameter Word‑p. 192

S.1.1.3 Minimum coupling loss values

S.1.1.4 Path loss models

S.1.1.5 Margins Word‑p. 193

S.2 Transmitter characteristics

S.2.1 Maximum CTS-FP Transmit Power limited by MS blocking

S.2.2 Maximum CTS-FP Transmit Power limited by Spectrum due to Modulation and WBN Word‑p. 194

S.2.3 Specification of max. CTS-FP Transmit Power and CTS-FP Spectrum due to modulation and wide band noise Word‑p. 195

S.2.3.1 Maximum CTS-FP transmit power

S.2.3.2 Spectrum due to modulation and wide band noise Word‑p. 196

S.2.4 Balanced link for zero interference scenario (Interferer at MCL scenario) Word‑p. 197

S.2.5 Range of Coverage for CTS

S.2.6 Minimum CTS-FP transmit power Word‑p. 198

S.2.7 Power Level Distribution Word‑p. 199

S.2.8 Spurious Emission

S.3 Receiver characteristics Word‑p. 200

S.3.1 Blocking

S.3.2 AM suppression Word‑p. 201

S.3.2.1 Spectrum due to modulation

S.3.2.2 Switching transients Word‑p. 202

S.3.2.3 Blocking Word‑p. 203

S.3.2.4 Specification of AM Suppression

S.3.3 Intermodulation Word‑p. 204

S.3.3.1 uncoordinated CTS-MSs → GSM-BTS

S.3.3.2 uncoordinated CTS-FPs → MS

S.3.3.3 uncoordinated GSM-MSs → CTS-FP Word‑p. 205

S.4 CTS-FP TI5 performance requirements

S.4.1 Nominal Error Rates for the CTS-FP

S.5 Conclusion Word‑p. 206