Content for TS 38.171 Word version: 16.3.0
4 General
4.1 Introduction
4.2 Measurement parameters
4.3 Response time
4.4 Time assistance
4.5 RRC states
4.6 Error definitions
5 A-GNSS minimum performance requirements (UE supports A-GPS L1 C/A only)
5.0 Introduction
5.1 Sensitivity
5.2 Nominal accuracy
5.3 Dynamic range
5.4 Multi-path scenario
5.5 Moving scenario and periodic update
6 A-GNSS minimum performance requirements (UE supports other or additional GNSSs)
6.0 Introduction
6.1 Sensitivity
6.2 Nominal accuracy
6.3 Dynamic range
6.4 Multi-path scenario
6.5 Moving scenario and periodic update
4 General Word‑p. 10
4.1 Introduction Word‑p. 10
4.2 Measurement parameters Word‑p. 10
4.2.1 UE based A-GNSS measurement parameters Word‑p. 10
4.2.2 UE assisted A-GNSS measurement parameters Word‑p. 10
4.3 Response time Word‑p. 10
4.4 Time assistance Word‑p. 10
4.4.1 Use of fine time assistance Word‑p. 11
4.5 RRC states Word‑p. 11
4.6 Error definitions Word‑p. 11
5 A-GNSS minimum performance requirements (UE supports A-GPS L1 C/A only) Word‑p. 12
5.0 Introduction Word‑p. 12
5.1 Sensitivity Word‑p. 12
5.1.1 Coarse time assistance Word‑p. 12
5.1.2 Fine time assistance Word‑p. 12
5.2 Nominal accuracy Word‑p. 13
5.3 Dynamic range Word‑p. 13
5.3.1 Minimum requirements (dynamic range) Word‑p. 14
5.4 Multi-path scenario Word‑p. 14
5.5 Moving scenario and periodic update Word‑p. 15
6 A-GNSS minimum performance requirements (UE supports other or additional GNSSs) Word‑p. 16
6.0 Introduction Word‑p. 16
6.1 Sensitivity Word‑p. 16
6.1.1 Coarse time assistance Word‑p. 16
6.1.2 Fine time assistance Word‑p. 17
6.2 Nominal accuracy Word‑p. 18
6.3 Dynamic range Word‑p. 19
6.3.1 Minimum requirements (dynamic range) Word‑p. 19
6.4 Multi-path scenario Word‑p. 19
6.5 Moving scenario and periodic update Word‑p. 20
