Content for TS 37.145-2 Word version: 17.1.0
2 References
3 Definitions, symbols and abbreviations
4 General test conditions and declarations
4.1 Measurement uncertainties and test requirements
4.2 Conducted and radiated requirement reference points
4.3 Base station classes for AAS BS
4.4 Regional requirements
4.5 Operating bands and band categories
4.6 Channel arrangements
4.7 Requirements for AAS BS capable of multi-band operation
4.8 AAS BS configurations
4.9 Capability sets
4.10 Manufacturer declarations
4.11 Test signal configurations for testing
4.12 RF channels and test models
4.13 Format and interpretation of tests
4.14 Reference coordinate system
4.15 Co-location requirements
5 Applicability of Requirements
...
...
2 References
3 Definitions, symbols and abbreviations Word‑p. 17
4 General test conditions and declarations Word‑p. 24
4.1 Measurement uncertainties and test requirements
4.1.1 General
4.1.2 Acceptable uncertainty of Test System Word‑p. 26
4.1.2.1 General
4.1.2.2 Measurement of transmitter Word‑p. 27
4.1.2.3 Measurement of receiver Word‑p. 30
4.1.2.4 Measurement of performance requirement Word‑p. 31
4.1.3 Interpretation of measurement results
4.2 Conducted and radiated requirement reference points
4.3 Base station classes for AAS BS Word‑p. 32
4.4 Regional requirements
4.5 Operating bands and band categories Word‑p. 34
4.6 Channel arrangements
4.7 Requirements for AAS BS capable of multi-band operation
4.8 AAS BS configurations Word‑p. 35
4.8.1 Transmit configurations
4.8.2 Receive configurations Word‑p. 36
4.8.3 Power supply options Word‑p. 37
4.8.4 BS with integrated Iuant BS modem
4.9 Capability sets
4.10 Manufacturer declarations Word‑p. 38
4.11 Test signal configurations for testing Word‑p. 45
4.11.1 General
4.11.1A NR Test signal used to build Test Configurations Word‑p. 46
4.11.2 Test signal configurations
4.11.2.1 ATCR1: UTRA multicarrier operation
4.11.2.1.1 General
4.11.2.1.2 ATCR1a generation
4.11.2.1.3 ATCR1b generation
4.11.2.1.4 ATCR1 power allocation
4.11.2.2 ANTCR1: UTRA FDD multicarrier non-contiguous operation Word‑p. 47
4.11.2.3 ATCR2: E-UTRA multicarrier operation
4.11.2.3.1 General
4.11.2.3.2 ATCR2a generation
4.11.2.3.3 ATCR2b generation Word‑p. 48
4.11.2.3.4 ATCR2 power allocation
4.11.2.4 ANTCR2: E-UTRA multicarrier non-contiguous operation Word‑p. 49
4.11.2.5 ATCR3: UTRA and E-UTRA multi-RAT operation
4.11.2.5.1 General
4.11.2.5.2 ATCR3a generation Word‑p. 50
4.11.2.5.3 ATCR3b generation
4.11.2.5.4 ATCR3 power allocation
4.11.2.6 ANTCR3: UTRA and E-UTRA multi-RAT non-contiguous operation
4.11.2.7 ATCR4: Single carrier for receiver tests
4.11.2.7.1 ATCR4a generation
4.11.2.7.2 ATCR4b generation
4.11.2.7.3 ATCR4c generation Word‑p. 52
4.11.2.7.3A ATCR4d generation
11.2.7.4 ATCR4 power allocation
4.11.2.8 ATCR5: MB-MSR operation
4.11.2.8.1 ATCR5a: MB-MSR test configuration for full carrier allocation
4.11.2.8.2 ATCR5b: MB-MSR test configuration with high PSD per carrier Word‑p. 53
4.11.2.9 ATCR6: Single carrier for transmitter tests Word‑p. 54
4.11.2.9.1 ATCR6a generation
4.11.2.9.2 ATCR6b generation
4.11.2.9.3 Void
4.11.2.9.3A ATCR6d generation
4.11.2.9.4 ATCR6 power allocation
4.11.2.10 ATCR7: E-UTRA and NR multi RAT operation Word‑p. 55
4.11.2.11 ANTCR7: E-UTRA and NR multi RAT non-contiguous operation Word‑p. 56
4.11.2.12 ATCR8: NR multicarrier operation Word‑p. 57
4.11.2.12.1 General
4.11.2.12.2 ATCR8a generation
4.11.2.12.3 ATCR8b generation
4.11.2.12.4 ATCR8 power allocation
4.11.2.13 ANTCR8: NR multicarrier non-contiguous operation Word‑p. 58
4.11.2.14 ATCR9: UTRA, E-UTRA and NR multi-RAT operation
4.11.2.15 ANTCR9: UTRA, E-UTRA and NR multi-RAT non-contiguous operation
4.12 RF channels and test models
4.12.1 RF channels
4.12.2 Test models Word‑p. 61
4.13 Format and interpretation of tests Word‑p. 62
4.14 Reference coordinate system Word‑p. 63
4.15 Co-location requirements Word‑p. 64
5 Applicability of Requirements Word‑p. 66
5.1 General
5.2 Test configurations for AAS BS for operating bands where MSR with more than 1 RAT is supported Word‑p. 69
5.3 Test configurations for multi-carrier capable AAS BS in operating bands where one RAT capability sets are supported Word‑p. 76
5.3.1 General
5.3.2 AAS BS supporting one RAT only MSR in the operating band
5.3.3 AAS BS supporting Single-RAT UTRA in the operating band Word‑p. 82
5.3.4 AAS BS supporting Single-RAT E-UTRA in the operating band Word‑p. 84
5.4 Test configurations for AAS BS operating bands with multi-band dependencies Word‑p. 87
