Content for TS 31.121 Word version: 16.9.0
5 Subscription related tests
5.1 IMSI / TMSI handling
5.1.1 UE identification by short IMSI
5.1.2 UE identification by short IMSI using a 2 digit MNC
5.1.3 UE identification by "short" TMSI
5.1.4 UE identification by "long" TMSI
5.1.5 UE identification by long IMSI, TMSI updating and key set identifier assignment
5.1.6 UE identification by short IMSI when accessing E-UTRAN/EPC
5.1.7 UE identification by short IMSI using a 2 digit MNC when accessing E-UTRAN/EPC
5.1.8 UE identification after changed IMSI with service "EMM Information" not available
5.1.9 UE identification by GUTI when using USIM with service "EMM Information" not available
5.1.10 UE identification by GUTI when using USIM with service "EMM Information" available
...
...
5 Subscription related tests p. 95
5.1 IMSI / TMSI handling p. 95
5.1.1 UE identification by short IMSI p. 95
5.1.1.1 Definition and applicability p. 95
5.1.1.2 Conformance requirement p. 95
5.1.1.3 Test purpose p. 96
5.1.1.4 Method of test p. 96
5.1.1.4.1 Initial conditions p. 96
5.1.1.4.2 Procedure p. 96
5.1.1.5 Acceptance criteria p. 96
5.1.2 UE identification by short IMSI using a 2 digit MNC p. 96
5.1.2.1 Definition and applicability p. 96
5.1.2.2 Conformance requirement p. 97
5.1.2.3 Test purpose p. 97
5.1.2.4 Method of test p. 97
5.1.2.4.1 Initial conditions p. 97
5.1.2.4.2 Procedure p. 98
5.1.2.5 Acceptance criteria p. 98
5.1.3 UE identification by "short" TMSI p. 98
5.1.3.1 Definition and applicability p. 98
5.1.3.2 Conformance requirement p. 98
5.1.3.3 Test purpose p. 98
5.1.3.4 Method of test p. 99
5.1.3.4.1 Initial conditions p. 99
5.1.3.4.2 Procedure p. 99
5.1.3.5 Acceptance criteria p. 99
5.1.4 UE identification by "long" TMSI p. 100
5.1.4.1 Definition and applicability p. 100
5.1.4.2 Conformance requirement p. 100
5.1.4.3 Test purpose p. 100
5.1.4.4 Method of test p. 100
5.1.4.4.1 Initial conditions p. 100
5.1.4.4.2 Procedure p. 101
5.1.4.5 Acceptance criteria p. 101
5.1.5 UE identification by long IMSI, TMSI updating and key set identifier assignment p. 101
5.1.5.1 Definition and applicability p. 101
5.1.5.2 Conformance requirement p. 102
5.1.5.3 Test purpose p. 102
5.1.5.4 Method of test p. 102
5.1.5.4.1 Initial conditions p. 102
5.1.5.4.2 Procedure p. 103
5.1.5.5 Acceptance criteria p. 104
5.1.6 UE identification by short IMSI when accessing E-UTRAN/EPC p. 104
5.1.6.1 Definition and applicability p. 104
5.1.6.2 Conformance requirement p. 104
5.1.6.3 Test purpose p. 105
5.1.6.4 Method of test p. 105
5.1.6.4.1 Initial conditions p. 105
5.1.6.4.2 Procedure p. 105
5.1.6.5 Acceptance criteria p. 105
5.1.7 UE identification by short IMSI using a 2 digit MNC when accessing E-UTRAN/EPC p. 105
5.1.7.1 Definition and applicability p. 105
5.1.7.2 Conformance requirement p. 106
5.1.7.3 Test purpose p. 106
5.1.7.4 Method of test p. 106
5.1.7.4.1 Initial conditions p. 106
5.1.7.4.2 Procedure p. 107
5.1.7.5 Acceptance criteria p. 107
5.1.8 UE identification after changed IMSI with service "EMM Information" not available p. 107
5.1.8.2 Conformance requirement p. 107
5.1.8.3 Test purpose p. 108
5.1.8.4 Method of test p. 108
5.1.8.4.1 Initial conditions p. 108
5.1.8.4.2 Procedure p. 108
5.1.8.5 Acceptance criteria p. 108
5.1.9 UE identification by GUTI when using USIM with service "EMM Information" not available p. 109
5.1.9.2 Conformance requirement p. 109
5.1.9.3 Test purpose p. 109
5.1.9.4 Method of test p. 109
5.1.9.4.1 Initial conditions p. 109
5.1.9.4.2 Procedure p. 109
5.1.9.5 Acceptance criteria p. 110
5.1.10 UE identification by GUTI when using USIM with service "EMM Information" available p. 110
5.1.10.1 Definition and applicability p. 110
5.1.10.2 Conformance requirement p. 110
5.1.10.3 Test purpose p. 111
5.1.10.4 Method of test p. 111
5.1.10.4.1 Initial conditions p. 111
5.1.10.4.2 Procedure p. 111
5.1.10.5 Acceptance criteria p. 111
