Content for TS 25.143 Word version: 17.0.0
4 Frequency bands and channel arrangement
5 General test conditions and declarations
6 Output power
7 Frequency stability
8 Out of band gain
9 Unwanted emission
10 Modulation accuracy
11 Input intermodulation
12 Output intermodulation
13 Adjacent Channel Rejection Ratio (ACRR)
A Repeater measurement system set-up
B Derivation of Test Requirements
C Acceptable uncertainty of Test Equipment
$ Change History
4 Frequency bands and channel arrangement |R4| p. 9
5 General test conditions and declarations |R4| p. 12
5.1 Acceptable uncertainty of Test System p. 13
5.2 Repeater test tolerances (informative) p. 15
5.3 Interpretation of measurement results p. 16
5.4 Test Environment p. 17
5.4.1 Normal test environment p. 17
5.4.2 Extreme test environment p. 17
5.4.3 Vibration p. 18
5.4.4 Power supply p. 18
5.5 Selection of configurations for testing p. 18
5.6 Regional requirements p. 19
5.7 Test Models p. 20
5.8 Format and interpretation of tests p. 20
5.9 Repeater configurations p. 21
6 Output power |R4| p. 21
6.1 Maximum output power p. 21
6.1.1 Definition and applicability p. 21
6.1.2 Minimum Requirements p. 21
6.1.3 Test purpose p. 22
6.1.4 Method of test p. 22
6.1.4.1 Initial conditions p. 22
6.1.4.2 Procedure p. 22
6.1.5 Test Requirements p. 22
7 Frequency stability |R4| p. 23
7.1 Definition and applicability p. 23
7.2 Minimum Requirement p. 23
7.3 Test purpose p. 23
7.4 Method of test p. 24
7.4.1 Initial conditions p. 24
7.4.2 Procedure p. 24
7.5 Test requirements p. 24
8 Out of band gain |R4| p. 24
8.1 Definitions and applicability p. 24
8.2 Minimum Requirements p. 24
8.3 Test purpose p. 25
8.4 Method of test p. 25
8.4.1 Initial conditions p. 25
8.4.2 Procedure p. 25
8.5 Test requirements p. 25
9 Unwanted emission |R4| p. 26
9.1 Out of band emission p. 26
9.1.1 Void
9.1.2 Operating band unwanted emissions |R8| p. 26
9.1.2.1 Definitions and applicability p. 26
9.1.2.2 Minimum Requirements p. 27
9.1.2.3 Test purpose p. 30
9.1.2.4 Method of test p. 30
9.1.2.4.1 Initial conditions p. 30
9.1.2.4.2 Procedures p. 31
9.1.2.5 Test requirements p. 31
9.1.3 Protection of BS receiver in the operating band |R8| p. 34
9.1.4 Co-existence with services in adjacent frequency bands |R8| p. 35
9.2 Spurious emissions p. 35
9.2.1 Definition and applicability p. 35
9.2.2 Minimum Requirements p. 35
9.2.2.1 Spurious emission (Category A) p. 35
9.2.2.2 Spurious emission (Category B) p. 36
9.2.2.3 Void
9.2.2.4 Co-existence with other systems in the same geographical area p. 37
9.2.2.5 Co-existence with co-located and co-sited base stations p. 41
9.2.2.6 Co-existence with PHS p. 44
9.2.2.7 Co-existence with UTRA-TDD and/or E-UTRA TDD p. 45
9.2.2.7.1 Operation in the same geographic area p. 45
9.2.2.7.2 Co-located Repeaters and UTRA-TDD and/or E-UTRA TDD base stations p. 47
9.2.2.8 Void
9.2.2.9 Protection of public safety operations |R8| p. 49
9.2.3 Test purpose p. 49
9.2.4 Method of test p. 49
9.2.4.1 Initial conditions p. 49
9.2.4.2 Procedures p. 50
9.2.5 Test requirements p. 50
10 Modulation accuracy |R4| p. 50
10.1 Error vector magnitude p. 50
10.1.1 Definition and applicability p. 50
10.1.2 Minimum Requirements p. 50
10.1.3 Test purpose p. 51
10.1.4 Method of test p. 51
10.1.5 Test requirements p. 51
10.2 Peak code domain error p. 51
10.2.1 Definition and applicability p. 51
10.2.2 Minimum Requirements p. 51
10.2.3 Test purpose p. 51
10.2.4 Method of test p. 52
10.2.4.1 Initial conditions p. 52
10.2.4.2 Procedure p. 52
10.2.5 Test requirements p. 52
10.3 Relative Code Domain Error (RCDE) for 64QAM modulation |R7| p. 52
10.3.1 Definition and applicability p. 52
10.3.2 Minimum requirement p. 52
10.3.3 Test purpose p. 52
10.3.4 Method of test p. 52
10.3.4.1 Initial conditions p. 52
10.3.4.2 Procedure p. 53
10.3.5 Test requirements p. 53
11 Input intermodulation |R4| p. 53
11.1 Definition and applicability p. 53
11.2 Minimum Requirements p. 53
11.2.1 General requirement p. 53
11.2.2 Co-location with BS in other systems p. 53
11.2.3 Co-existence with other systems p. 57
11.3 Test purpose p. 60
11.4 Method of test p. 60
11.4.1 Initial conditions p. 60
11.4.2 Procedure p. 61
11.5 Test requirements p. 61
12 Output intermodulation |R4| p. 68
12.1 Definition and applicability p. 68
12.2 Minimum requirement p. 69
12.3 Test purpose p. 69
12.4 Method of test p. 69
12.4.1 Initial conditions p. 69
12.4.2 Procedures p. 69
12.5 Test requirements p. 69
13 Adjacent Channel Rejection Ratio (ACRR) |R4| p. 70
13.1 Definitions and applicability p. 70
13.2 Minimum Requirements p. 70
13.3 Test purpose p. 70
13.4 Method of test p. 70
A Repeater measurement system set-up |R4| p. 72
A.1 Maximum output power p. 72
A.2 Frequency stability p. 72
A.3 Out of band gain p. 72
A.4 Unwanted emission: Spectrum emission mask p. 72
A.5 Unwanted emission: Spurious emission p. 73
A.6 Modulation Accuracy: Error Vector Magnitude p. 73
A.7 Modulation Accuracy: Peak Code Domain Error Error and Relative Coder Domain Error p. 73
A.8 Input inter modulation p. 74
A.9 Output Intermodulation p. 74
B Derivation of Test Requirements |R4| p. 75
C Acceptable uncertainty of Test Equipment |R4| p. 78
$ Change History p. 79
