Tech-invite  3GPP-Specs  Releases  Features  Entities  Interfaces  SBIs  Identifiers  Ti+  Search in Tech-invite
21  22  23  24  25  26  27  28  29  31  32  33  34  35  36  37  38  4‑5x
Top   in Index   Prev   Next

TS 36.459  RAN3 ★
E-UTRAN — SLm Interface –
SLm Application Protocol (SLmAP)

3GPP‑Page   ETSI‑search  
use "3GPP‑Page" to get the Word version
use "ETSI‑search" to get the PDF version
for a better overview, the Table of Contents (ToC) is reproduced
V15.0.0 (PDF)  2018/06  49 p.
V14.0.0  2017/03  49 p.
V13.1.0  2016/03  74 p.
V12.1.0  2015/03  75 p.
V11.3.0  2013/09  50 p.
Rapporteur:  Mrs. Brooks, Terri
This TS specifies the E-UTRAN radio network layer signalling protocol for the SLm interface. The SLm Application Protocol (SLmAP) supports the functions of the SLm interface by signalling procedures defined in this document. SLmAP is developed in accordance to the general principles stated in TS 36.305 and TS 36.456.

full Table of Contents for  TS 36.459  Word version:   15.0.0

Here   Top
1 Scope  2 References  3 Definitions, symbols and abbreviations  4 General  5 SLmAP Services  6 Services Expected from Signalling Transport  7 Functions of SLmAP  8 SLmAP Procedures  9 Elements for SLmAP Communication  10 Handling of Unknown, Unforeseen and Erroneous Protocol Data  A Change history 

 

1  Scope  Word-p. 6
2  References
3  Definitions, symbols and abbreviations
3.1  Definitions
3.2  Symbols  Word-p. 7
3.3  Abbreviations
4  General
4.1  Procedure Specification Principles
4.2  Forwards and Backwards Compatibility  Word-p. 8
4.3  Specification Notations
5  SLmAP Services  Up
6  Services Expected from Signalling Transport
7  Functions of SLmAP
8  SLmAP Procedures  Word-p. 9
8.1  List of SLmAP Elementary procedures
8.2  Measurement Procedures
8.2.1  Measurement
8.2.1.1  General
8.2.1.2  Successful Operation  Word-p. 10
8.2.1.3  Unsuccessful Operation
8.2.1.4  Abnormal Conditions  Up
8.2.2  Measurement Update
8.2.2.1  General
8.2.2.2  Successful Operation  Word-p. 11
8.2.2.3  Unsuccessful Operation
8.2.2.4  Abnormal Conditions
8.2.3  Measurement Abort
8.2.3.1  General
8.2.3.2  Successful Operation
8.2.3.3  Unsuccessful Operation  Word-p. 12
8.2.3.4  Abnormal Conditions  Up
8.3  Management procedures
8.3.1  SLm Setup
8.3.1.1  General
8.3.1.2  Successful Operation
8.3.1.3  Unsuccessful Operation
8.3.1.4  Abnormal Conditions  Word-p. 13
8.3.2  Reset
8.3.2.1  General
8.3.2.2  Successful Operation
8.3.2.2.1  Reset Procedure Initiated from the E-SMLC  Up
8.3.2.2.2  Reset Procedure Initiated from the LMU
8.3.2.4  Abnormal Conditions  Word-p. 14
8.3.3  Error Indication
8.3.3.1  General
8.3.3.2  Successful Operation
9  Elements for SLmAP Communication
9.1  Message Functional Definition and Content
9.1.1  MEASUREMENT REQUEST
9.1.2  MEASUREMENT RESPONSE  Word-p. 15
9.1.3  MEASUREMENT FAILURE  Up
9.1.4  SLm SETUP REQUEST
9.1.5  SLm SETUP RESPONSE
9.1.6  SLm SETUP FAILURE
9.1.7  RESET REQUEST  Word-p. 16
9.1.8  RESET ACKNOWLEDGE
9.1.9  MEASUREMENT ABORT
9.1.10  MEASUREMENT UPDATE
9.1.11  ERROR INDICATION  Word-p. 17
9.2  Information Element Definitions
9.2.1  General  Up
9.2.2  Message Type
9.2.3  SLmAP Transaction ID
9.2.4  UL RTOA Measurement Configuration  Word-p. 18
9.2.5  UL RTOA Measurements  Word-p. 20
9.2.6  LMU ID
9.2.7  E-SMLC ID
9.2.8  LMU Information  Word-p. 21
9.2.9  LMU Position
9.2.10  Cause  Word-p. 22
9.2.11  Criticality Diagnostics  Word-p. 23
9.2.12  E-SMLC Measurement ID  Word-p. 24
9.3  Message and Information Element Abstract Syntax (with ASN.1)  Word-p. 25
9.3.1  General
9.3.2  Usage of Private Message Mechanism for Non-standard Use
9.3.3  Elementary Procedure Definitions
9.3.4  PDU Definitions  Word-p. 29
9.3.5  Information Element definitions  Word-p. 34
9.3.6  Common definitions  Word-p. 40
9.3.7  Constant definitions  Word-p. 41
9.3.8  Container definitions  Word-p. 42
9.4  Message Transfer Syntax  Word-p. 46
9.5  Timers
10  Handling of Unknown, Unforeseen and Erroneous Protocol Data  Word-p. 47
A  Change history

Up   Top