| |
| 1 | Scope p. 26
|
| 2 | References p. 26
|
| 3 | Definitions of terms, symbols and abbreviations p. 29
| 3.1 | Terms p. 29
|
| 3.2 | Symbols p. 29
|
| 3.3 | Abbreviations p. 29
|
| 3.4 | Coding Conventions p. 29
|
| 3.5 | Generic procedures for 5G NR, E UTRAN, IMS and NB IoT p. 29
|
| 3.6 | Table of optional features p. 30
|
| 3.7 | Applicability p. 31
| 3.7.1 | Applicability to user equipment p. 31
|
| 3.7.2 | Supported additional explicit verification methods p. 32
|
| 3.7.3 | Applicability of the individual tests p. 32
|
|
| 3.8 | Applicability table p. 33
|
| 3.9 | Rules for the representation of number systems and strings p. 39
|
|
| 4 | Test environment p. 40
| 4.1 | - p. 40
| 4.1.1 | General test environment p. 40
|
| 4.1.2 | Example - test environment for implicit testing p. 41
|
| 4.1.3 | Example - test environment for contents verification p. 41
|
| 4.1.4 | Example - test environment for seamless testing p. 42
|
| 4.1.5 | Example - test environment for test toolkit events based testing p. 42
|
| 4.1.6 | Example - test environment for UEs with ETSI eSSP/iSSP p. 43
|
|
| 4.2 | Requirements to the EUT and the test environment p. 43
| 4.2.1 | General Requirements p. 43
|
| 4.2.2 | Requirements to the UE (EUT) - supported interfaces p. 44
|
| 4.2.3 | Supported RATs p. 44
|
| 4.2.4 | Initial and final procedure steps p. 44
|
|
| 4.3 | Random value generation p. 45
|
| 4.4 | Suitability assessment p. 45
| 4.4.1 | Suitability assessment in present test procedures p. 45
|
| 4.4.2 | Suitability assessment in test descriptions p. 45
|
| 4.4.3 | Suitability assessment in the test protocol p. 46
|
| 4.4.4 | Justification of additional measures p. 46
|
|
| 4.5 | Definition of default values p. 46
| 4.5.1 | Introduction p. 46
| 4.5.1.1 | Installation, provisioning or modification methods for EFs and DFs p. 46
|
| 4.5.1.2 | TS.48 Version and usage p. 46
|
|
| 4.5.2 | Definition of the Default UICC p. 46
|
| 4.5.3 | Definition of FDN UICC p. 47
|
| 4.5.4 | Definition of E-UTRAN/EPC UICC p. 48
|
| 4.5.5 | Definition of E-UTRAN/EPC ISIM-UICC p. 49
|
| 4.5.6 | Definition of ACSGL/OCSGL E-UTRAN/EPC UICC p. 49
|
| 4.5.7 | Definition of Non-Access Stratum Configuration UICC p. 56
|
| 4.5.8 | Definition of Non-Access Stratum Configuration of E-UTRAN/EPC UICC p. 56
|
| 4.5.9 | Definition of 5G-NR UICC p. 56
|
| 4.5.10 | Definition of 5G-NR UICC - non-IMSI SUPI Type p. 59
|
| 4.5.11 | Definition of 5G-NR UICC - support of Rel-16 features p. 61
|
| 4.5.12 | Definition of 5G-NR UICC - support of Rel-17 features p. 63
|
| 4.5.13 | Definition 5G-NR UICC - CAG support p. 63
|
| 4.5.14 | Definition of 5G-NR ISIM-UICC p. 64
|
| 4.5.15 | Definition of 5G-NR UICC - support of Rel-18 features p. 64
|
| 4.5.16 | Definition of 5G-NR SSIM-UICC p. 64
|
|
| 4.6 | Definition of default values for EFs commonly used with random value generation p. 65
| 4.6.1 | EFIMSI with 3-digit MNC and random value p. 65
|
| 4.6.2 | EFIMSI "short", with 3-digit MNC and random value p. 65
|
| 4.6.3 | EFIMSI "short", with 2-digit MNC and random value p. 66
|
| 4.6.4 | EFIMSI "long", with 3-digit MNC and random value p. 66
|
| 4.6.5 | EFIMSI for SUCI calculation tests p. 66
|
| 4.6.6 | EFIMSI for "change IMSI" tests p. 66
|
| 4.6.7 | EFRouting_Indicator with 2-digit MNC and random value p. 67
|
| 4.6.8 | EFLOCI with "short" random TMSI value p. 67
|
| 4.6.9 | EFLOCI with "long" random TMSI value p. 67
|
| 4.6.10 | EFEPSLOCI p. 67
|
| 4.6.11 | EFFDN p. 68
|
| 4.6.12 | EFECC p. 69
|
|
| 4.7 | Default values for NG-SS and UE configurations p. 69
| 4.7.1 | Default NG-SS and UE configuration for different usage settings p. 69
|
| 4.7.2 | Default NG-SS configuration for 3GPP access with IMS service p. 70
| 4.7.2.1 | Default NG-SS configuration for IMS Registration support p. 70
|
| 4.7.2.2 | Default NG-SS configuration for PS voice support p. 70
|
|
| 4.7.3 | Default NG-SS procedure for 5G Registration on 3GPP access with IMS service p. 70
|
| 4.7.4 | Default UE configuration for IMS service p. 70
|
|
|
| 5 | Subscription related tests p. 70
| 5.1 | IMSI/TMSI handling p. 70
| 5.1.1 | UE identification by short IMSI p. 70
|
| 5.1.2 | UE identification by short IMSI using a 2-digit MNC p. 70
|
| 5.1.3 | UE identification by "short" TMSI p. 70
|
| 5.1.4 | UE identification by "long" TMSI p. 71
|
| 5.1.5 | UE identification by long IMSI, TMSI updating and key set identifier assignment p. 71
|
| 5.1.6 | UE identification by short IMSI when accessing E-UTRAN/EPC p. 71
| 5.1.6.1 | Definition and applicability p. 71
|
| 5.1.6.2 | Conformance requirement p. 71
|
| 5.1.6.3 | Test purpose p. 71
|
| 5.1.6.4 | Method of test p. 71
| 5.1.6.4.1 | Initial conditions p. 71
|
| 5.1.6.4.2 | Procedure p. 72
| 5.1.6.4.2.1 | Test procedure A p. 72
|
| 5.1.6.4.2.2 | Test procedure B p. 72
|
|
|
| 5.1.6.5 | Acceptance criteria p. 72
| 5.1.6.5.1 | Acceptance criteria for Test Procedure A p. 72
|
| 5.1.6.5.2 | Acceptance criteria for Test Procedure B p. 73
|
| 5.1.6.4.3 | Common acceptance criteria p. 73
|
|
|
| 5.1.7 | UE identification by short IMSI using a 2-digit MNC when accessing E-UTRAN/EPC p. 73
| 5.1.7.1 | Definition and applicability p. 73
|
| 5.1.7.2 | Conformance requirement p. 73
|
| 5.1.7.3 | Test purpose p. 73
|
| 5.1.7.4 | Method of test p. 73
| 5.1.7.4.1 | Initial conditions p. 73
|
| 5.1.7.4.2 | Procedure p. 74
| 5.1.7.4.2.1 | Test procedure A p. 74
|
| 5.1.7.4.2.2 | Test procedure B p. 74
|
|
|
| 5.1.7.5 | Acceptance criteria p. 74
|
|
| 5.1.8 | UE identification after changed IMSI with service "EMM Information" not available p. 75
| 5.1.8.1 | Definition and applicability p. 75
|
| 5.1.8.2 | Conformance requirement p. 75
|
| 5.1.8.3 | Test purpose p. 75
|
| 5.1.8.4 | Method of test p. 75
| 5.1.8.4.1 | Initial conditions p. 75
|
| 5.1.8.4.2 | Procedure p. 76
| 5.1.8.4.2.1 | Test procedure A p. 76
|
| 5.1.8.4.2.2 | Test procedure B p. 76
|
|
|
| 5.1.8.5 | Acceptance criteria p. 77
|
|
| 5.1.9 | UE identification by GUTI when using USIM with service "EMM Information" not available p. 77
|
| 5.1.10 | UE identification by GUTI when using USIM with service "EMM Information" available p. 79
| 5.1.10.2 | Conformance requirement p. 79
|
| 5.1.10.3 | Test purpose p. 80
|
| 5.1.10.4 | Method of test p. 80
| 5.1.10.4.1 | Initial conditions p. 80
|
| 5.1.10.4.2 | Procedure p. 80
| 5.1.10.4.2.1 | Test procedure A p. 80
|
| 5.1.10.4.2.2 | Test procedure B p. 81
|
| 5.1.10.4.2.3 | Common final Test Procedure p. 81
|
|
|
| 5.1.10.5 | Acceptance criteria p. 81
|
|
|
| 5.2 | Access Control handling p. 82
| 5.2.1 | Access Control information handling p. 82
|
| 5.2.2 | Access Control information handling for E-UTRAN/EPC p. 82
| 5.2.2.1 | Definition and applicability p. 82
|
| 5.2.2.2 | Conformance requirement p. 82
|
| 5.2.2.3 | Test purpose p. 82
|
| 5.2.2.4 | Method of test p. 83
| 5.2.2.4.1 | Initial conditions p. 83
|
| 5.2.2.4.2 | Coding details p. 83
|
| 5.2.2.4.3 | Procedure p. 83
|
|
| 5.2.2.5 | Acceptance criteria p. 83
|
|
| 5.2.3 | Access Control information handling for NB-IoT p. 84
| 5.2.3.1 | Definition and applicability p. 84
|
| 5.2.3.2 | Conformance requirement p. 84
|
| 5.2.3.3 | Test purpose p. 84
|
| 5.2.3.4 | Method of test p. 84
| 5.2.3.4.1 | Initial conditions p. 84
|
| 5.2.3.4.2 | Coding details p. 85
|
| 5.2.3.4.3 | Procedure p. 85
|
|
| 5.2.3.5 | Acceptance criteria p. 85
|
|
|
| 5.3 | Handling subscription identifier privacy for 5G p. 85
| 5.3.1 | SUCI calculation by ME using null scheme p. 85
| 5.3.1.1 | Definition and applicability p. 85
|
| 5.3.1.2 | Conformance requirement p. 85
|
| 5.3.1.3 | Test purpose p. 86
|
| 5.3.1.4 | Method of test p. 86
| 5.3.1.4.1 | Initial conditions p. 86
|
| 5.3.1.4.2 | Procedure p. 87
|
|
| 5.3.1.5 | Acceptance criteria p. 88
|
|
| 5.3.2 | SUCI calculation by ME using Profile B p. 88
| 5.3.2.1 | Definition and applicability p. 88
|
| 5.3.2.2 | Conformance requirement p. 88
|
| 5.3.2.3 | Test purpose p. 89
|
| 5.3.2.4 | Method of test p. 89
| 5.3.2.4.1 | Initial conditions p. 89
|
| 5.3.2.4.2 | Procedure p. 89
|
|
| 5.3.2.5 | Acceptance criteria p. 90
|
|
| 5.3.3 | UE identification by SUCI during initial registration - SUCI calculation by USIM using profile B p. 90
| 5.3.3.1 | Definition and applicability p. 90
|
| 5.3.3.2 | Conformance requirement p. 90
|
| 5.3.3.3 | Test purpose p. 90
|
| 5.3.3.4 | Method of test p. 91
| 5.3.3.4.1 | Initial conditions p. 91
|
| 5.3.3.4.2 | Procedure p. 92
|
|
| 5.3.3.5 | Acceptance criteria p. 92
|
|
| 5.3.4 | UE identification by SUCI in response to IDENTITY REQUEST message p. 92
| 5.3.4.1 | Definition and applicability p. 92
|
| 5.3.4.2 | Conformance requirement p. 93
|
| 5.3.4.3 | Test purpose p. 93
|
| 5.3.4.4 | Method of test p. 93
| 5.3.4.4.1 | Initial conditions p. 93
|
| 5.3.4.4.2 | Procedure p. 94
|
|
| 5.3.4.5 | Acceptance criteria p. 95
|
|
| 5.3.5 | UE identification by SUCI in response to IDENTITY REQUEST message with T3519 timer expiry p. 95
| 5.3.5.1 | Definition and applicability p. 95
|
| 5.3.5.2 | Conformance requirement p. 95
|
| 5.3.5.3 | Test purpose p. 96
|
| 5.3.5.4 | Method of test p. 96
| 5.3.5.4.1 | Initial conditions p. 96
|
| 5.3.5.4.2 | Procedure p. 97
|
|
| 5.3.5.5 | Acceptance criteria p. 98
|
|
| 5.3.6 | UE identification by SUCI in response to IDENTITY REQUEST message and AUTHENTICATION REJECT p. 98
| 5.3.6.1 | Definition and applicability p. 98
|
| 5.3.6.2 | Conformance requirement p. 98
|
| 5.3.6.3 | Test purpose p. 99
|
| 5.3.6.4 | Method of test p. 99
| 5.3.6.4.1 | Initial conditions p. 99
|
| 5.3.6.4.2 | Procedure p. 100
|
|
| 5.3.6.5 | Acceptance criteria p. 101
|
|
| 5.3.7 | SUCI calculation by the ME using null scheme - missing parameters for subscription identifier privacy support by the USIM p. 101
| 5.3.7.1 | Definition and applicability p. 101
|
| 5.3.7.2 | Conformance requirement p. 101
|
| 5.3.7.3 | Test purpose p. 101
|
| 5.3.7.4 | Method of test p. 102
| 5.3.7.4.1 | Initial conditions p. 102
|
| 5.3.7.4.2 | Procedure p. 102
|
|
| 5.3.7.5 | Acceptance criteria p. 102
|
|
| 5.3.8 | UE identification by 5G-GUTI - Last Registered TAI stored on USIM p. 103
| 5.3.8.1 | Definition and applicability p. 103
|
| 5.3.8.2 | Conformance requirement p. 103
|
| 5.3.8.3 | Test purpose p. 103
|
| 5.3.8.4 | Method of test p. 103
| 5.3.8.4.1 | Initial conditions p. 103
|
| 5.3.8.4.2 | Procedure p. 104
|
|
| 5.3.8.5 | Acceptance criteria p. 104
|
|
| 5.3.9 | UE identification by 5G-GUTI - Last Registered TAI stored by ME p. 105
| 5.3.9.1 | Definition and applicability p. 105
|
| 5.3.9.2 | Conformance requirement p. 105
|
| 5.3.9.3 | Test purpose p. 105
|
| 5.3.9.4 | Method of test p. 105
| 5.3.9.4.1 | Initial conditions p. 105
|
| 5.3.9.4.2 | Procedure p. 106
|
|
| 5.3.9.5 | Acceptance criteria p. 106
|
|
| 5.3.10 | UE identification after SUPI is changed p. 107
| 5.3.10.1 | Definition and applicability p. 107
|
| 5.3.10.2 | Conformance requirement p. 107
|
| 5.3.10.3 | Test purpose p. 107
|
| 5.3.10.4 | Method of test p. 107
| 5.3.10.4.1 | Initial conditions p. 107
|
| 5.3.10.4.2 | Procedure p. 108
|
|
| 5.3.10.5 | Acceptance criteria p. 108
|
|
| 5.3.11 | SUCI calculation by ME using Profile A p. 108
| 5.3.11.1 | Definition and applicability p. 108
|
| 5.3.11.2 | Conformance requirement p. 108
|
| 5.3.11.3 | Test purpose p. 109
|
| 5.3.11.4 | Method of test p. 109
| 5.3.11.4.1 | Initial conditions p. 109
|
| 5.3.11.4.2 | Procedure p. 110
|
|
| 5.3.11.5 | Acceptance criteria p. 110
|
|
| 5.3.12 | UE identification by SUCI during initial registration - SUCI calculation by USIM using profile A p. 110
| 5.3.12.1 | Definition and applicability p. 110
|
| 5.3.12.2 | Conformance requirement p. 110
|
| 5.3.12.3 | Test purpose p. 111
|
| 5.3.12.4 | Method of test p. 111
| 5.3.12.4.1 | Initial conditions p. 111
|
| 5.3.12.4.2 | Procedure p. 112
|
|
| 5.3.12.5 | Acceptance criteria p. 112
|
|
| 5.3.13 | SUCI calculation by ME using null scheme- no Protection Scheme Identifier provisioned in the USIM p. 113
| 5.3.13.1 | Definition and applicability p. 113
|
| 5.3.13.2 | Conformance requirement p. 113
|
| 5.3.13.3 | Test purpose p. 113
|
| 5.3.13.4 | Method of test p. 113
| 5.3.13.4.1 | Initial conditions p. 113
|
| 5.3.13.4.2 | Procedure p. 114
|
|
| 5.3.13.5 | Acceptance criteria p. 114
|
|
| 5.3.14 | SUCI calculation by ME using null scheme - no Home Network Public Key for supported protection scheme provisioned in the USIM p. 114
| 5.3.14.1 | Definition and applicability p. 114
|
| 5.3.14.2 | Conformance requirement p. 114
|
| 5.3.14.3 | Test purpose p. 115
|
| 5.3.14.4 | Method of test p. 115
| 5.3.14.4.1 | Initial conditions p. 115
|
| 5.3.14.4.2 | Procedure p. 115
|
|
| 5.3.14.5 | Acceptance criteria p. 116
|
|
| 5.3.15 | SUCI calculation by ME using null scheme with the E-UTRAN/EPC UICC p. 116
| 5.3.15.1 | Definition and applicability p. 116
|
| 5.3.15.2 | Conformance requirement p. 116
|
| 5.3.15.3 | Test purpose p. 116
|
| 5.3.15.4 | Method of test p. 116
| 5.3.15.4.1 | Initial conditions p. 116
|
| 5.3.15.4.2 | Procedure p. 117
|
|
| 5.3.15.5 | Acceptance criteria p. 117
|
|
| 5.3.16 | SUCI calculation by ME using the lower priority protection scheme when the higher priority protection scheme is not supported by the ME p. 117
| 5.3.16.1 | Definition and applicability p. 117
|
| 5.3.16.2 | Conformance requirement p. 118
|
| 5.3.16.3 | Test purpose p. 118
|
| 5.3.16.4 | Method of test p. 118
| 5.3.16.4.1 | Initial conditions p. 118
|
| 5.3.16.4.2 | Procedure p. 119
|
|
| 5.3.16.5 | Acceptance criteria p. 120
|
|
| 5.3.17 | SUCI calculation by ME using Profile B with compressed Home Network Public Key p. 120
| 5.3.17.1 | Definition and applicability p. 120
|
| 5.3.17.2 | Conformance requirement p. 120
|
| 5.3.17.3 | Test purpose p. 121
|
| 5.3.17.4 | Method of test p. 121
| 5.3.17.4.1 | Initial conditions p. 121
|
| 5.3.17.4.2 | Procedure p. 122
|
|
| 5.3.17.5 | Acceptance criteria p. 123
|
|
|
| 5.4 | Unified Access Control information handling for 5G-NR p. 123
| 5.4.1 | Unified Access Control - Access identity 0, no access identities indicated by USIM p. 123
| 5.4.1.1 | Definition and applicability p. 123
|
| 5.4.1.2 | Conformance requirement p. 123
|
| 5.4.1.3 | Test purpose p. 124
|
| 5.4.1.4 | Method of test p. 124
| 5.4.1.4.1 | Initial conditions p. 124
|
| 5.4.1.4.2 | Test sequence settings p. 125
|
| 5.4.1.4.3 | Procedure p. 125
|
|
| 5.4.1.5 | Acceptance criteria p. 125
|
|
| 5.4.1A | Unified Access Control - Access identity 0, no access identities indicated by USIM, Access Category 8 p. 126
| 5.4.1A.1 | Definition and applicability p. 126
|
| 5.4.1A.2 | Conformance requirement p. 126
|
| 5.4.1A.3 | Test purpose p. 127
|
| 5.4.1A.4 | Method of test p. 127
| 5.4.1A.4.1 | Initial conditions p. 127
|
| 5.4.1A.4.2 | Test sequence settings p. 128
|
| 5.4.1A.4.3 | Procedure p. 128
|
|
| 5.4.1A.5 | Acceptance criteria p. 128
|
|
| 5.4.2 | Unified Access Control - Access Identity 1 - MPS indicated by USIM p. 129
| 5.4.2.1 | Definition and applicability p. 129
|
| 5.4.2.2 | Conformance requirement p. 129
|
| 5.4.2.3 | Test purpose p. 129
|
| 5.4.2.4 | Method of test p. 130
| 5.4.2.4.1 | Initial conditions p. 130
|
| 5.4.2.4.2 | Test sequence settings p. 130
|
| 5.4.2.4.3 | Procedure p. 131
|
|
| 5.4.2.5 | Acceptance criteria p. 132
|
|
| 5.4.2A | Unified Access Control - Access Identity 1 - MPS indicated by USIM, Access Category 8 p. 132
| 5.4.2A.1 | Definition and applicability p. 132
|
| 5.4.2A.2 | Conformance requirement p. 132
|
| 5.4.2A.3 | Test purpose p. 133
|
| 5.4.2A.4 | Method of test p. 133
| 5.4.2A.4.1 | Initial conditions p. 133
|
| 5.4.2A.4.2 | Test sequence settings p. 134
|
| 5.4.2A.4.3 | Procedure p. 134
|
|
| 5.4.2A.5 | Acceptance criteria p. 135
|
|
| 5.4.3 | Unified Access Control - Access Identity 1 - no MPS indication by USIM and SUPI not changed p. 135
| 5.4.3.1 | Definition and applicability p. 135
|
| 5.4.3.2 | Conformance requirement p. 135
|
| 5.4.3.3 | Test purpose p. 136
|
| 5.4.3.4 | Method of test p. 137
| 5.4.3.4.1 | Initial conditions p. 137
|
| 5.4.3.4.2 | Test sequence settings p. 138
|
| 5.4.3.4.3 | Procedure p. 138
|
|
| 5.4.3.5 | Acceptance criteria p. 139
|
|
| 5.4.4 | Unified Access Control - Access Identity 1 - no MPS indication by USIM and SUPI is changed p. 139
| 5.4.4.1 | Definition and applicability p. 139
|
| 5.4.4.2 | Conformance requirement p. 140
|
| 5.4.4.3 | Test purpose p. 140
|
| 5.4.4.4 | Method of test p. 141
| 5.4.4.4.1 | Initial conditions p. 141
|
| 5.4.4.4.2 | Test sequence settings p. 141
|
| 5.4.4.4.3 | Procedure p. 142
|
|
| 5.4.4.5 | Acceptance criteria p. 143
|
|
| 5.4.5 | Unified Access Control - Access Identity 2 - MCS indicated by USIM p. 143
| 5.4.5.1 | Definition and applicability p. 143
|
| 5.4.5.2 | Conformance requirement p. 143
|
| 5.4.5.3 | Test purpose p. 144
|
| 5.4.5.4 | Method of test p. 144
| 5.4.5.4.1 | Initial conditions p. 144
|
| 5.4.5.4.2 | Test sequence settings p. 145
|
| 5.4.5.4.3 | Procedure p. 145
|
|
| 5.4.5.5 | Acceptance criteria p. 146
|
|
| 5.4.5A | Unified Access Control - Access Identity 2 - MCS indicated by USIM p. 146
| 5.4.5A.1 | Definition and applicability p. 146
|
| 5.4.5A.2 | Conformance requirement p. 147
|
| 5.4.5A.3 | Test purpose p. 147
|
| 5.4.5A.4 | Method of test p. 148
| 5.4.5A.4.1 | Initial conditions p. 148
|
| 5.4.5A.4.2 | Test sequence settings p. 148
|
| 5.4.5A.4.3 | Procedure p. 149
|
|
| 5.4.5A.5 | Acceptance criteria p. 149
|
|
| 5.4.6 | Unified Access Control - Access Identity 2 - no MCS indication by USIM and SUPI is not changed p. 150
| 5.4.6.1 | Definition and applicability p. 150
|
| 5.4.6.2 | Conformance requirement p. 150
|
| 5.4.6.3 | Test purpose p. 151
|
| 5.4.6.4 | Method of test p. 151
| 5.4.6.4.1 | Initial conditions p. 151
|
| 5.4.6.4.2 | Test sequence settings p. 152
|
| 5.4.6.4.3 | Procedure p. 152
|
| 5.4.6.4.4 | Acceptance criteria p. 153
|
|
|
| 5.4.7 | Unified Access Control - Access Identity 2 - no MCS indication by USIM and SUPI is changed p. 154
| 5.4.7.1 | Definition and applicability p. 154
|
| 5.4.7.2 | Conformance requirement p. 154
|
| 5.4.7.3 | Test purpose p. 155
|
| 5.4.7.4 | Method of test p. 155
| 5.4.7.4.1 | Initial conditions p. 155
|
| 5.4.7.4.2 | Test sequence settings p. 156
|
| 5.4.7.4.3 | Procedure p. 156
|
|
| 5.4.7.5 | Acceptance criteria p. 157
|
|
| 5.4.8 | Unified Access Control - Access Identities 11 and 15 indicated by USIM p. 157
| 5.4.8.1 | Definition and applicability p. 157
|
| 5.4.8.2 | Conformance requirement p. 158
|
| 5.4.8.3 | Test purpose p. 158
|
| 5.4.8.4 | Method of test p. 158
| 5.4.8.4.1 | Initial conditions p. 158
|
| 5.4.8.4.2 | Test sequence settings p. 159
|
| 5.4.8.4.3 | Procedure p. 160
|
|
| 5.4.8.5 | Acceptance criteria p. 160
|
|
| 5.4.8A | Unified Access Control - Access Identities 11 and 15 indicated by USIM, Access Category 8 p. 161
| 5.4.8A.1 | Definition and applicability p. 161
|
| 5.4.8A.2 | Conformance requirement p. 161
|
| 5.4.8A.3 | Test purpose p. 162
|
| 5.4.8A.4 | Method of test p. 162
| 5.4.8A.4.1 | Initial conditions p. 162
|
| 5.4.8A.4.2 | Test sequence settings p. 163
|
| 5.4.8A.4.3 | Procedure p. 163
|
|
| 5.4.8A.5 | Acceptance criteria p. 164
|
|
| 5.4.9 | Unified Access Control - Access Identities 12, 13 and 14 indicated by USIM p. 164
| 5.4.9.1 | Definition and applicability p. 164
|
| 5.4.9.2 | Conformance requirement p. 164
|
| 5.4.9.3 | Test purpose p. 165
|
| 5.4.9.4 | Method of test p. 165
| 5.4.9.4.1 | Initial conditions p. 165
|
| 5.4.9.4.2 | Tables related to the test case p. 166
|
| 5.4.9.4.3 | Procedure p. 167
|
|
| 5.4.9.5 | Acceptance criteria p. 167
|
|
| 5.4.9A | Unified Access Control - Access Identities 12, 13 and 14 indicated by USIM, Access Category 8 p. 168
| 5.4.9A.1 | Definition and applicability p. 168
|
| 5.4.9A.2 | Conformance requirement p. 168
|
| 5.4.9A.3 | Test purpose p. 169
|
| 5.4.9A.4 | Method of test p. 169
| 5.4.9A.4.1 | Initial conditions p. 169
|
| 5.4.9A.4.2 | Tables related to the test case p. 170
|
| 5.4.9A.4.3 | Procedure p. 170
|
|
| 5.4.9A.5 | Acceptance criteria p. 171
|
|
| 5.4.10 | Unified Access Control - Operator-Defined Access Category p. 171
| 5.4.10.1 | Definition and applicability p. 171
|
| 5.4.10.2 | Conformance requirement p. 171
|
| 5.4.10.3 | Test purpose p. 173
|
| 5.4.10.4 | Method of test p. 173
| 5.4.10.4.1 | Initial conditions p. 173
|
| 5.4.10.4.2 | Tables related to the test case p. 174
|
| 5.4.10.4.3 | Procedure p. 175
|
|
| 5.4.10.5 | Acceptance criteria p. 176
|
|
| 5.4.11 | Unified Access Control - Operator-Defined Access Categories, no change in SUPI p. 176
| 5.4.11.1 | Definition and applicability p. 176
|
| 5.4.11.2 | Conformance requirement p. 177
|
| 5.4.11.3 | Test purpose p. 178
|
| 5.4.11.4 | Method of test p. 178
| 5.4.11.4.1 | Initial conditions p. 178
|
| 5.4.11.4.2 | Tables related to the test case p. 180
|
| 5.4.11.4.3 | Procedure p. 180
|
|
| 5.4.11.5 | Acceptance criteria p. 181
|
|
| 5.4.12 | Unified Access Control - Operator-Defined Access Categories, SUPI change p. 181
| 5.4.12.1 | Definition and applicability p. 181
|
| 5.4.12.2 | Conformance requirement p. 182
|
| 5.4.12.3 | Test purpose p. 183
|
| 5.4.12.4 | Method of test p. 184
| 5.4.12.4.1 | Initial conditions p. 184
|
| 5.4.12.4.2 | Tables related to the test case p. 185
|
| 5.4.12.4.3 | Procedure p. 186
|
|
| 5.4.12.5 | Acceptance criteria p. 187
|
|
|
| 5.5 | Handling of operator controlled features p. 187
| 5.5.1 | Display of registered 5G PLMN name from USIM p. 187
| 5.5.1.1 | Definition and applicability p. 187
|
| 5.5.1.2 | Conformance requirement p. 187
|
| 5.5.1.3 | Test purpose p. 187
|
| 5.5.1.4 | Method of tests p. 187
| 5.5.1.4.1 | Initial conditions p. 187
|
| 5.5.1.4.2 | Procedure p. 190
|
| 5.5.1.4.3 | Acceptance criteria p. 190
|
|
|
| 5.5.2 | Display of registered 5G PLMN name from ME p. 191
| 5.5.2.1 | Definition and applicability p. 191
|
| 5.5.2.2 | Conformance requirement p. 191
|
| 5.5.2.3 | Test purpose p. 191
|
| 5.5.2.4 | Method of tests p. 191
| 5.5.2.4.1 | Initial conditions p. 191
|
| 5.5.2.4.2 | Procedure p. 193
|
| 5.5.2.4.3 | Acceptance criteria p. 194
|
|
| 5.6.1.1 | Definition and applicability p. 194
|
| 5.6.1.2 | Conformance requirement p. 194
|
| 5.6.1.3 | Test purpose p. 195
|
| 5.6.1.4 | Method of test p. 195
| 5.6.1.4.1 | Initial conditions p. 195
|
| 5.6.1.4.2 | Procedure p. 196
|
|
| 5.6.1.5 | Acceptance criteria p. 197
|
| 5.6.2.1 | Definition and applicability p. 197
|
| 5.6.2.2 | Conformance requirement p. 197
|
| 5.6.2.3 | Test purpose p. 198
|
| 5.6.2.4 | Method of test p. 198
| 5.6.2.4.1 | Initial conditions p. 198
|
| 5.6.2.4.2 | Procedure p. 200
|
|
| 5.6.2.5 | Acceptance criteria p. 200
|
| 5.6.3.1 | Definition and applicability p. 200
|
| 5.6.3.2 | Conformance requirement p. 201
|
| 5.6.3.3 | Test purpose p. 201
|
| 5.6.3.4 | Method of test p. 202
| 5.6.3.4.1 | Initial conditions p. 202
|
| 5.6.3.4.2 | Procedure p. 203
|
|
| 5.6.3.5 | Acceptance criteria p. 203
|
|
| 5.6.4 | UE identification after SUPI is changed p. 204
| 5.6.4.1 | Definition and applicability p. 204
|
| 5.6.4.2 | Conformance requirement p. 204
|
| 5.6.4.3 | Test purpose p. 204
|
| 5.6.4.4 | Method of test p. 205
| 5.6.4.4.1 | Initial conditions p. 205
|
| 5.6.4.4.2 | Procedure p. 205
|
|
| 5.6.4.5 | Acceptance criteria p. 206
|
|
| 5.6.5 | UE identification by SUCI during initial registration - SUCI calculation by ME using profile A p. 206
| 5.6.5.1 | Definition and applicability p. 206
|
| 5.6.5.2 | Conformance requirement p. 206
|
| 5.6.5.3 | Test purpose p. 207
|
| 5.6.5.4 | Method of test p. 207
| 5.6.5.4.1 | Initial conditions p. 207
|
| 5.6.5.4.2 | Procedure p. 208
|
|
| 5.6.5.5 | Acceptance criteria p. 209
|
|
| 5.6.6 | UE identification by SUCI during initial registration - SUCI calculation by ME using profile A p. 209
| 5.6.6.1 | Definition and applicability p. 209
|
| 5.6.6.2 | Conformance requirement p. 209
|
| 5.6.6.3 | Test purpose p. 210
|
| 5.6.6.4 | Method of test p. 210
| 5.6.6.4.1 | Initial conditions p. 210
|
| 5.6.6.4.2 | Procedure p. 211
|
|
| 5.6.6.5 | Acceptance criteria p. 211
|
|
|
|
| 6 | Security related Tests p. 212
| 6.1 | PIN handling p. 212
| 6.1.1 | Entry of PIN p. 212
| 6.1.1.1 | Definition and applicability p. 212
|
| 6.1.1.2 | Conformance requirement p. 212
|
| 6.1.1.3 | Test purpose p. 212
|
| 6.1.1.4 | Method of test p. 212
| 6.1.1.4.1 | Initial conditions p. 212
|
| 6.1.1.4.2 | Procedure p. 212
|
|
| 6.1.1.5 | Acceptance criteria p. 213
|
|
| 6.1.2 | Change of PIN p. 213
| 6.1.2.1 | Definition and applicability p. 213
|
| 6.1.2.2 | Conformance requirement p. 213
|
| 6.1.2.3 | Test purpose p. 213
|
| 6.1.2.4 | Method of test p. 213
| 6.1.2.4.1 | Initial conditions p. 213
|
| 6.1.2.4.2 | Procedure p. 213
|
|
| 6.1.2.5 | Acceptance criteria p. 214
|
|
| 6.1.3 | Unblock PIN p. 214
| 6.1.3.1 | Definition and applicability p. 214
|
| 6.1.3.2 | Conformance requirement p. 214
|
| 6.1.3.3 | Test purpose p. 215
|
| 6.1.3.4 | Method of test p. 215
| 6.1.3.4.1 | Initial conditions p. 215
|
| 6.1.3.4.2 | Procedure p. 215
|
|
| 6.1.3.5 | Acceptance criteria p. 216
|
|
| 6.1.4 | Entry of PIN2 p. 217
| 6.1.4.1 | Definition and applicability p. 217
|
| 6.1.4.2 | Conformance requirement p. 217
|
| 6.1.4.3 | Test purpose p. 217
|
| 6.1.4.4 | Method of test p. 217
| 6.1.4.4.1 | Initial conditions p. 217
|
| 6.1.4.4.2 | Procedure p. 217
|
|
| 6.1.4.5 | Acceptance criteria p. 218
|
|
| 6.1.5 | Change of PIN2 p. 218
| 6.1.5.1 | Definition and applicability p. 218
|
| 6.1.5.2 | Conformance requirement p. 218
|
| 6.1.5.3 | Test purpose p. 218
|
| 6.1.5.4 | Method of test p. 218
| 6.1.5.4.1 | Initial conditions p. 218
|
| 6.1.5.4.2 | Procedure p. 218
|
|
| 6.1.5.5 | Acceptance criteria p. 219
|
|
| 6.1.6 | Unblock PIN2 p. 219
| 6.1.6.1 | Definition and applicability p. 219
|
| 6.1.6.2 | Conformance requirement p. 219
|
| 6.1.6.3 | Test purpose p. 220
|
| 6.1.6.4 | Method of test p. 220
| 6.1.6.4.1 | Initial conditions p. 220
|
| 6.1.6.4.2 | Procedure p. 220
|
|
| 6.1.6.5 | Acceptance criteria p. 221
|
|
| 6.1.7 | Replacement of PIN p. 222
| 6.1.7.1 | Definition and applicability p. 222
|
| 6.1.7.2 | Conformance requirement p. 222
|
| 6.1.7.3 | Test purpose p. 222
|
| 6.1.7.4 | Method of test p. 222
| 6.1.7.4.1 | Initial conditions p. 222
|
| 6.1.7.4.2 | Procedure p. 222
|
|
| 6.1.7.5 | Acceptance criteria p. 223
|
|
| 6.1.8 | Change of Universal PIN p. 223
| 6.1.8.1 | Definition and applicability p. 223
|
| 6.1.8.2 | Conformance requirement p. 224
|
| 6.1.8.3 | Test purpose p. 224
|
| 6.1.8.4 | Method of test p. 224
| 6.1.8.4.1 | Initial conditions p. 224
|
| 6.1.8.4.2 | Procedure p. 224
|
|
| 6.1.8.5 | Acceptance criteria p. 225
|
|
| 6.1.9 | Unblock Universal PIN p. 225
| 6.1.9.1 | Definition and applicability p. 225
|
| 6.1.9.2 | Conformance requirement p. 225
|
| 6.1.9.3 | Test purpose p. 225
|
| 6.1.9.4 | Method of test p. 225
| 6.1.9.4.1 | Initial conditions p. 225
|
| 6.1.9.4.2 | Procedure p. 225
|
|
| 6.1.9.5 | Acceptance criteria p. 226
|
|
| 6.1.10 | Entry of PIN on multi-verification capable UICCs p. 226
| 6.1.10.1 | Definition and applicability p. 226
|
| 6.1.10.2 | Conformance requirement p. 226
|
| 6.1.10.4 | Method of test p. 227
| 6.1.10.4.1 | Initial conditions p. 227
|
| 6.1.10.4.2 | Procedure p. 228
|
|
| 6.1.10.5 | Acceptance criteria p. 228
|
|
| 6.1.11 | Change of PIN on multi-verification capable UICCs p. 228
| 6.1.11.1 | Definition and applicability p. 228
|
| 6.1.11.2 | Conformance requirement p. 228
|
| 6.1.11.3 | Test purpose p. 228
|
| 6.1.11.4 | Method of test p. 229
| 6.1.11.4.1 | Initial conditions p. 229
|
| 6.1.11.4.2 | Procedure p. 229
|
|
| 6.1.11.5 | Acceptance criteria p. 230
|
|
| 6.1.12 | Unblock PIN on multi-verification capable UICCs p. 230
| 6.1.12.1 | Definition and applicability p. 230
|
| 6.1.12.2 | Conformance requirement p. 230
|
| 6.1.12.3 | Test purpose p. 231
|
| 6.1.12.4 | Method of test p. 231
| 6.1.12.4.1 | Initial conditions p. 231
|
| 6.1.12.4.2 | Procedure p. 232
|
|
| 6.1.12.5 | Acceptance criteria p. 233
|
|
| 6.1.13 | Entry of PIN2 on multi-verification capable UICCs p. 233
| 6.1.13.1 | Definition and applicability p. 233
|
| 6.1.13.2 | Conformance requirement p. 233
|
| 6.1.13.3 | Test purpose p. 233
|
| 6.1.13.4 | Method of test p. 234
| 6.1.13.4.1 | Initial conditions p. 234
|
| 6.1.13.4.2 | Procedure p. 235
|
|
| 6.1.13.5 | Acceptance criteria p. 235
|
|
| 6.1.14 | Change of PIN2 on multi-verification capable UICCs p. 235
| 6.1.14.1 | Definition and applicability p. 235
|
| 6.1.14.2 | Conformance requirement p. 235
|
| 6.1.14.3 | Test purpose p. 235
|
| 6.1.14.4 | Method of test p. 236
| 6.1.14.4.1 | Initial conditions p. 236
|
| 6.1.14.4.2 | Procedure p. 237
|
|
| 6.1.14.5 | Acceptance criteria p. 237
|
|
| 6.1.15 | Unblock PIN2 on multi-verification capable UICCs p. 237
| 6.1.15.1 | Definition and applicability p. 237
|
| 6.1.15.2 | Conformance requirement p. 237
|
| 6.1.15.3 | Test purpose p. 238
|
| 6.1.15.4 | Method of test p. 238
| 6.1.15.4.1 | Initial conditions p. 238
|
| 6.1.15.4.2 | Procedure p. 239
|
|
| 6.1.15.5 | Acceptance criteria p. 240
|
|
| 6.1.16 | Replacement of PIN with key reference "07" p. 241
| 6.1.16.1 | Definition and applicability p. 241
|
| 6.1.16.2 | Conformance requirement p. 241
|
| 6.1.16.3 | Test purpose p. 241
|
| 6.1.16.4 | Method of test p. 241
| 6.1.16.4.1 | Initial conditions p. 241
|
| 6.1.16.4.2 | Procedure p. 242
|
|
| 6.1.16.5 | Acceptance criteria p. 243
|
|
|
| 6.2 | Fixed Dialling Numbers (FDN) handling p. 243
| 6.2.1 | ME and USIM with FDN enabled, EFADN readable and updateable p. 243
|
| 6.2.2 | ME and USIM with FDN disabled p. 243
|
| 6.2.3 | Enabling, disabling and updating of FDN p. 243
|
| 6.2.4 | ME and USIM with FDN enabled, EFADN readable and updateable (Rel-4 and onwards) p. 243
|
|
| 6.3 | Void p. …
|
| 6.4 | Advice of charge (AoC) handling p. 244
| 6.4.1 | AoC not supported by USIM p. 244
|
| 6.4.2 | Maximum frequency of ACM updating p. 244
|
| 6.4.3 | Call terminated when ACM greater than ACMmax p. 244
|
| 6.4.4 | Response codes of increase command of ACM p. 244
|
|
|
| 7 | PLMN related tests p. 244
| 7.1 | FPLMN handling p. 244
| 7.1.1 | Adding FPLMN to the Forbidden PLMN list p. 244
|
| 7.1.2 | UE updating forbidden PLMNs p. 244
|
| 7.1.3 | UE deleting forbidden PLMNs p. 244
|
| 7.1.4 | Adding FPLMN to the forbidden PLMN list when accessing E UTRAN p. 244
| 7.1.4.1 | Definition and applicability p. 244
|
| 7.1.4.2 | Conformance requirement p. 244
|
| 7.1.4.3 | Test purpose p. 245
|
| 7.1.4.4 | Method of test p. 245
| 7.1.4.4.1 | Initial conditions p. 245
|
| 7.1.4.4.2 | Procedure p. 245
|
|
| 7.1.4.5 | Acceptance criteria p. 246
|
|
| 7.1.5 | UE updating forbidden PLMNs when accessing E-UTRAN p. 248
| 7.1.5.1 | Definition and applicability p. 248
|
| 7.1.5.2 | Conformance requirement p. 248
|
| 7.1.5.3 | Test purpose p. 248
|
| 7.1.5.4 | Method of test p. 248
| 7.1.5.4.1 | Initial conditions p. 248
|
| 7.1.5.4.2 | Procedure p. 248
|
|
| 7.1.5.5 | Acceptance criteria p. 248
|
|
| 7.1.6 | UE deleting forbidden PLMNs when accessing E-UTRAN p. 249
| 7.1.6.1 | Definition and applicability p. 249
|
| 7.1.6.2 | Conformance requirement p. 249
|
| 7.1.6.3 | Test purpose p. 250
|
| 7.1.6.4 | Method of test p. 250
| 7.1.6.4.1 | Initial conditions p. 250
|
| 7.1.6.4.2 | Procedure p. 250
|
|
| 7.1.6.5 | Acceptance criteria p. 250
|
|
| 7.1.7 | Updating the Forbidden PLMN list after receiving non-integrity protected reject message - UTRAN p. 251
|
| 7.1.8 | Updating the Forbidden PLMN list after receiving non-integrity protected reject message - E UTRAN p. 251
| 7.1.8.1 | Definition and applicability p. 251
|
| 7.1.8.2 | Conformance requirement p. 251
|
| 7.1.8.3 | Test purpose p. 252
|
| 7.1.8.4 | Method of test p. 252
| 7.1.8.4.1 | Initial conditions p. 252
|
| 7.1.8.4.2 | Procedure p. 252
|
|
| 7.1.8.5 | Acceptance criteria p. 253
|
|
|
| 7.2 | User controlled PLMN selector handling p. 253
| 7.2.1 | UE updating the User controlled PLMN selector list p. 253
| 7.2.1.1 | Definition and applicability p. 253
|
| 7.2.1.2 | Conformance requirement p. 254
|
| 7.2.1.3 | Test purpose p. 254
|
| 7.2.1.4 | Method of test p. 254
| 7.2.1.4.1 | Initial conditions p. 254
|
| 7.2.1.4.2 | Procedure p. 254
|
|
| 7.2.1.5 | Acceptance criteria p. 254
|
|
| 7.2.2 | UE recognizing the priority order of the User controlled PLMN selector list with the same access Technology p. 255
|
| 7.2.3 | UE recognizing the priority order of the User controlled PLMN selector list using an ACT Preference p. 255
|
| 7.2.4 | Void p. …
|
| 7.2.5 | UE updating the User controlled PLMN selector list for E-UTRAN p. 255
| 7.2.5.1 | Definition and applicability p. 255
|
| 7.2.5.2 | Conformance requirement p. 255
|
| 7.2.5.3 | Test purpose p. 255
|
| 7.2.5.4 | Method of test p. 256
| 7.2.5.4.1 | Initial conditions p. 256
|
| 7.2.5.4.2 | Procedure p. 256
|
|
| 7.2.5.5 | Acceptance criteria p. 256
|
|
| 7.2.6 | UE recognizing the priority order of the User controlled PLMN selector list using an ACT preference - UTRAN/E-UTRAN p. 257
|
| 7.2.7 | UE recognizing the priority order of the User controlled PLMN selector list using an ACT preference - GSM/E-UTRAN p. 257
|
| 7.2.8 | UE recognising the priority order of the User controlled PLMN selector list with the same access technology - E-UTRAN in NB-S1 mode p. 257
| 7.2.8.1 | Definition and applicability p. 257
|
| 7.2.8.2 | Conformance requirement p. 257
|
| 7.2.8.3 | Test purpose p. 257
|
| 7.2.8.4 | Method of test p. 257
| 7.2.8.4.1 | Initial conditions p. 257
|
| 7.2.8.4.2 | Procedure p. 258
|
|
| 7.2.8.5 | Acceptance criteria p. 259
|
|
| 7.2.9 | UE recognising the priority order of the User controlled PLMN selector list using the ACT preference - E UTRAN in WB-S1/E UTRAN in NB-S1 p. 259
| 7.2.9.1 | Definition and applicability p. 259
|
| 7.2.9.2 | Conformance requirement p. 260
|
| 7.2.9.3 | Test purpose p. 260
|
| 7.2.9.4 | Method of test p. 260
| 7.2.9.4.1 | Initial conditions p. 260
|
| 7.2.9.4.2 | Procedure p. 261
|
|
| 7.2.9.5 | Acceptance criteria p. 261
|
|
|
| 7.3 | Operator controlled PLMN selector handling p. 262
| 7.3.1 | UE recognizing the priority order of the Operator controlled PLMN selector list p. 262
|
| 7.3.2 | UE recognizing the priority order of the User controlled PLMN selector over the Operator controlled PLMN selector list p. 262
|
| 7.3.3 | UE recognizing the priority order of the Operator controlled PLMN selector list when accessing E UTRAN p. 262
| 7.3.3.1 | Definition and applicability p. 262
|
| 7.3.3.2 | Conformance requirement p. 262
|
| 7.3.3.3 | Test purpose p. 262
|
| 7.3.3.4 | Method of test p. 262
| 7.3.3.4.1 | Initial conditions p. 262
|
| 7.3.3.4.2 | Procedure p. 264
|
|
| 7.3.3.5 | Acceptance criteria p. 264
|
|
| 7.3.4 | UE recognizing the priority order of the User controlled PLMN selector over the Operator controlled PLMN selector list - E UTRAN p. 265
| 7.3.4.1 | Definition and applicability p. 265
|
| 7.3.4.2 | Conformance requirement p. 265
|
| 7.3.4.3 | Test purpose p. 265
|
| 7.3.4.4 | Method of test p. 265
| 7.3.4.4.1 | Initial conditions p. 265
|
| 7.3.4.4.2 | Procedure p. 266
|
|
| 7.3.4.5 | Acceptance criteria p. 266
|
|
| 7.3.5 | UE recognising the priority order of the Operator controlled PLMN selector list when accessing E UTRAN in NB-S1 mode p. 267
| 7.3.5.1 | Definition and applicability p. 267
|
| 7.3.5.2 | Conformance requirement p. 267
|
| 7.3.5.3 | Test purpose p. 267
|
| 7.3.5.4 | Method of test p. 267
| 7.3.5.4.1 | Initial conditions p. 267
|
| 7.3.5.4.2 | Procedure p. 268
|
|
| 7.3.5.5 | Acceptance criteria p. 269
|
|
| 7.3.6 | UE recognising the priority order of the User controlled PLMN selector over the Operator controlled PLMN selector list - E-UTRAN in NB-S1 mode p. 269
| 7.3.6.1 | Definition and applicability p. 269
|
| 7.3.6.2 | Conformance requirement p. 269
|
| 7.3.6.3 | Test purpose p. 270
|
| 7.3.6.4 | Method of test p. 270
| 7.3.6.4.1 | Initial conditions p. 270
|
| 7.3.6.4.2 | Procedure p. 272
|
|
| 7.3.6.5 | Acceptance criteria p. 272
|
|
| 7.3.7 | UE recognising the priority order of the Operator controlled PLMN selector list using the ACT preference - E UTRAN in NB-S1/ E UTRAN in WB-S1 mode p. 272
| 7.3.7.1 | Definition and applicability p. 272
|
| 7.3.7.2 | Conformance requirement p. 273
|
| 7.3.7.3 | Test purpose p. 273
|
| 7.3.7.4 | Method of test p. 273
| 7.3.7.4.1 | Initial conditions p. 273
|
| 7.3.7.4.2 | Procedure p. 274
|
|
| 7.3.7.5 | Acceptance criteria p. 274
|
|
| 7.3.8 | UE recognising the priority order of the Operator controlled PLMN selector list using the ACT preference - E UTRAN in NB S1 mode/ GSM p. 275
|
| 7.3.9 | UE recognising the priority order of the Operator controlled PLMN selector list using the ACT preference - E UTRAN in WB S1 mode/GSM p. 275
|
|
| 7.4 | Higher priority PLMN search handling p. 275
| 7.4.1 | UE recognizing the search period of the Higher priority PLMN p. 275
|
| 7.4.2 | GSM/UMTS dual mode UEs recognizing the search period of the Higher priority PLMN p. 275
|
| 7.4.3 | UE recognizing the search period of the Higher priority PLMN - E UTRAN p. 275
| 7.4.3.1 | Definition and applicability p. 275
|
| 7.4.3.2 | Conformance requirement p. 275
|
| 7.4.3.3 | Test purpose p. 276
|
| 7.4.3.4 | Method of test p. 276
| 7.4.3.4.1 | Initial conditions p. 276
|
| 7.4.3.4.2 | Procedure p. 276
|
|
| 7.4.3.5 | Acceptance criteria p. 277
|
|
| 7.4.4 | E-UTRAN/EPC capable UEs recognizing the search period of the Higher priority PLMN - GSM/E-UTRAN p. 278
|
| 7.4.5 | E UTRAN/EPC capable UEs recognizing the search period of the Higher priority PLMN - UTRAN/E UTRAN p. 278
|
| 7.4.6 | UE recognising the search period of the higher priority PLMN - Satellite NG RAN p. 278
|
| 7.4.7 | UE recognising the search period of the higher priority PLMN - NG RAN p. 278
| 7.4.7.1 | Definition and applicability p. 278
|
| 7.4.7.2 | Conformance requirement p. 278
|
| 7.4.7.3 | Test purpose p. 279
|
| 7.4.7.4 | Method of test p. 279
| 7.4.7.4.1 | Initial conditions p. 279
|
| 7.4.7.4.2 | Procedure p. 280
|
|
| 7.4.7.5 | Acceptance criteria p. 281
|
|
|
| 7.5 | Void p. …
|
|
| 8 | Subscription independent tests p. 282
| 8.1 | Phone book procedures p. 282
| 8.1.1 | Recognition of a previously changed phonebook p. 282
|
| 8.1.2 | Update of the Phonebook Synchronization Counter (PSC) p. 282
| 8.1.2.1 | Definition and applicability p. 282
|
| 8.1.2.2 | Conformance requirement p. 282
|
| 8.1.2.3 | Test purpose p. 282
|
| 8.1.2.4 | Method of test p. 282
| 8.1.2.4.1 | Initial conditions p. 282
|
| 8.1.2.4.2 | Procedure p. 283
|
|
| 8.1.2.5 | Acceptance criteria p. 284
|
|
| 8.1.3 | Handling of BCD number/ SSC content extension p. 284
| 8.1.3.1 | Definition and applicability p. 284
|
| 8.1.3.2 | Conformance requirement p. 284
|
| 8.1.3.3 | Test purpose p. 284
|
| 8.1.3.4 | Method of test p. 285
| 8.1.3.4.1 | Initial conditions p. 285
|
| 8.1.3.4.2 | Procedure p. 287
|
|
| 8.1.3.5 | Acceptance criteria p. 289
|
|
| 8.1.4 | Phonebook selection p. 289
| 8.1.4.1 | Definition and applicability p. 289
|
| 8.1.4.2 | Conformance requirement p. 289
|
| 8.1.4.3 | Test purpose p. 290
|
| 8.1.4.4 | Method of test p. 290
| 8.1.4.4.1 | Initial conditions p. 290
|
| 8.1.4.4.2 | Procedure p. 293
|
|
| 8.1.4.5 | Acceptance criteria p. 294
|
|
| 8.1.5 | Local Phonebook handling p. 295
| 8.1.5.1 | Definition and applicability p. 295
|
| 8.1.5.2 | Conformance requirement p. 295
|
| 8.1.5.3 | Test purpose p. 295
|
| 8.1.5.4 | Method of test p. 295
| 8.1.5.4.1 | Initial conditions p. 295
|
| 8.1.5.4.2 | Procedure p. 296
|
|
| 8.1.5.5 | Acceptance criteria p. 297
|
|
|
| 8.2 | Short message handling report p. 298
| 8.2.1 | Correct storage of a SM on the USIM p. 298
|
| 8.2.2 | Correct reading of a SM on the USIM p. 298
|
| 8.2.3 | SM memory capacity exceeded handling p. 298
|
| 8.2.4A | Correct storage of an SM on the UICC p. 298
|
| 8.2.4B | Correct storage of an SM on the UICC p. 298
|
| 8.2.5 | Correct reading of a SM on the USIM if USIM and ISIM are present p. 298
|
| 8.2.6 | Correct reading of a SM on the ISIM if USIM and ISIM are present p. 298
|
| 8.2.7 | Correct storage of an SM on the UICC p. 298
|
|
| 8.3 | MMS related tests p. 299
| 8.3.0 | General condition p. 299
|
| 8.3.1 | UE recognizing the priority order of MMS Issuer Connectivity Parameters p. 299
|
| 8.3.2 | UE recognizing the priority order of MMS User Connectivity Parameters p. 299
|
| 8.3.3 | UE recognizing the priority order of MMS Issuer Connectivity Parameters over the MMS User Connectivity Parameters p. 299
|
| 8.3.4 | Usage of MMS notification p. 299
|
|
| 8.4 | UICC presence detection p. 299
|
| 8.5 | UICC presence detection when connected to E UTRAN/EPC p. 299
|
|
| 9 | USIM service handling p. 299
| 9.1 | Access Point Name Control List handling p. 299
| 9.1.1 | Access Point Name Control List handling for UEs supporting ACL p. 299
|
| 9.1.2 | Network provided APN handling for UEs supporting ACL p. 299
|
| 9.1.3 | Access Point Name Control List handling for UEs not supporting ACL p. 300
|
| 9.1.4 | Access Point Name Control List handling for UEs supporting ACL connected to E-UTRAN/EPC p. 300
| 9.1.4.1 | Definition and applicability p. 300
|
| 9.1.4.2 | Conformance requirement p. 300
|
| 9.1.4.3 | Test purpose p. 300
|
| 9.1.4.4 | Method of test p. 300
| 9.1.4.4.1 | Initial conditions p. 300
|
| 9.1.4.4.2 | Procedure p. 301
|
|
| 9.1.4.5 | Acceptance criteria p. 302
|
|
|
| 9.2 | Service Dialling Numbers handling p. 302
| 9.2.1 | Service Dialling Numbers handling p. 302
|
|
|
| 10 | CSG list handling p. 302
| 10.1 | CSG list handling for E-UTRA p. 302
| 10.1.1 | Automatic CSG selection in E-UTRA with CSG list on USIM, success p. 302
| 10.1.1.1 | Definition and applicability p. 302
|
| 10.1.1.2 | Conformance requirement p. 302
|
| 10.1.1.3 | Test purpose p. 303
|
| 10.1.1.4 | Method of test p. 303
| 10.1.1.4.1 | Initial conditions p. 303
|
| 10.1.1.4.2 | Procedure p. 303
|
|
| 10.1.1.5 | Acceptance criteria p. 304
|
| 10.1.2.1 | Definition and applicability p. 304
|
| 10.1.2.2 | Conformance requirement p. 304
|
| 10.1.2.3 | Test purpose p. 305
|
| 10.1.2.4 | Method of test p. 305
| 10.1.2.4.1 | Initial conditions p. 305
|
| 10.1.2.4.2 | Procedure p. 305
|
|
| 10.1.2.5 | Acceptance criteria p. 305
|
|
| 10.1.3 | Manual CSG selection in E-UTRA with CSG list on USIM, success p. 306
| 10.1.3.1 | Definition and applicability p. 306
|
| 10.1.3.2 | Conformance requirement p. 306
|
| 10.1.3.3 | Test purpose p. 307
|
| 10.1.3.4 | Method of test p. 307
| 10.1.3.4.1 | Initial conditions p. 307
|
| 10.1.3.4.2 | Procedure p. 307
|
|
| 10.1.3.5 | Acceptance criteria p. 308
|
|
| 10.1.4 | Manual CSG selection in E-UTRA with CSG list on USIM, rejected p. 309
| 10.1.4.1 | Definition and applicability p. 309
|
| 10.1.4.2 | Conformance requirement p. 309
|
| 10.1.4.3 | Test purpose p. 309
|
| 10.1.4.4 | Method of test p. 310
| 10.1.4.4.1 | Initial conditions p. 310
|
| 10.1.4.4.2 | Procedure p. 310
|
|
| 10.1.4.5 | Acceptance criteria p. 310
|
|
| 10.1.5 | CSG selection in E-UTRA with no CSG list on USIM, no IMSI change p. 311
| 10.1.5.1 | Definition and applicability p. 311
|
| 10.1.5.2 | Conformance requirement p. 311
|
| 10.1.5.3 | Test purpose p. 312
|
| 10.1.5.4 | Method of test p. 312
| 10.1.5.4.1 | Initial conditions p. 312
|
| 10.1.5.4.2 | Procedure p. 312
|
|
| 10.1.5.5 | Acceptance criteria p. 313
|
|
| 10.1.6 | CSG selection in E-UTRA with no CSG list on USIM, with IMSI change p. 314
| 10.1.6.1 | Definition and applicability p. 314
|
| 10.1.6.2 | Conformance requirement p. 314
|
| 10.1.6.3 | Test purpose p. 314
|
| 10.1.6.4 | Method of test p. 314
| 10.1.6.4.1 | Initial conditions p. 314
|
| 10.1.6.4.2 | Procedure p. 315
|
|
| 10.1.6.5 | Acceptance criteria p. 316
|
|
| 10.1.7 | Manual CSG selection without display restrictions in E-UTRA with ACSG list and OCSG list on USIM p. 316
| 10.1.7.1 | Definition and applicability p. 316
|
| 10.1.7.2 | Conformance requirement p. 316
|
| 10.1.7.3 | Test purpose p. 317
|
| 10.1.7.4 | Method of test p. 317
| 10.1.7.4.1 | Initial conditions p. 317
|
| 10.1.7.4.2 | Procedure p. 317
|
|
| 10.1.7.5 | Acceptance criteria p. 318
|
|
| 10.1.8 | Manual CSG selection with display restrictions in E-UTRA with ACSG list and OCSG list on USIM p. 319
| 10.1.8.1 | Definition and applicability p. 319
|
| 10.1.8.2 | Conformance requirement p. 319
|
| 10.1.8.3 | Test purpose p. 320
|
| 10.1.8.4 | Method of test p. 320
| 10.1.8.4.1 | Initial conditions p. 320
|
| 10.1.8.4.2 | Procedure p. 320
|
|
| 10.1.8.5 | Acceptance criteria p. 321
|
|
|
| 10.2 | CSG list handling for UTRA p. 322
| 10.2.1 | Manual CSG selection without display restrictions in UTRA with ACSG list and OCSG list on USIM p. 322
|
| 10.2.2 | Manual CSG selection with display restrictions in UTRA with ACSG list and OCSG list on USIM p. 323
|
| 10.2.3 | Manual CSG selection in UTRA with CSG list on USIM, success p. 323
|
|
|
| 11 | NAS security context parameter handling p. 323
| 11.1 | NAS security context parameter handling when service "EMM Information" is available p. 323
| 11.1.1 | Definition and applicability p. 323
|
| 11.1.2 | Conformance requirement p. 323
|
| 11.1.3 | Test purpose p. 323
|
| 11.1.4 | Method of test p. 323
| 11.1.4.1 | Initial conditions p. 323
|
| 11.1.4.2 | Procedure p. 324
|
| 11.1.4.5 | Acceptance criteria p. 324
|
|
|
| 11.2 | NAS security context parameter handling when service "EMM Information" is not available, no IMSI change p. 325
| 11.2.1 | Definition and applicability p. 325
|
| 11.2.2 | Conformance requirement p. 325
|
| 11.2.3 | Test purpose p. 326
|
| 11.2.4 | Method of test p. 326
| 11.2.4.1 | Initial conditions p. 326
|
| 11.2.4.2 | Procedure p. 326
|
|
| 11.2.5 | Acceptance criteria p. 327
|
|
| 11.3 | NAS security context parameter handling when service "EMM Information" is not available, IMSI Changed p. 327
| 11.3.1 | Definition and applicability p. 327
|
| 11.3.2 | Conformance requirement p. 327
|
| 11.3.3 | Test purpose p. 328
|
| 11.3.4 | Method of test p. 328
| 11.3.4.1 | Initial conditions p. 328
|
| 11.3.4.2 | Procedure p. 328
|
|
| 11.3.5 | Acceptance criteria p. 329
|
|
| 11.4 | EPS NAS Security Context Storage p. 329
| 11.4.1 | Definition and applicability p. 329
|
| 11.4.2 | Conformance requirement p. 329
|
| 11.4.3 | Test purpose p. 330
|
| 11.4.4 | Method of test p. 330
| 11.4.4.1 | Initial conditions p. 330
|
| 11.4.4.2 | Procedure p. 330
|
|
| 11.4.5 | Acceptance criteria p. 331
|
|
|
| 12 | Non Access Stratum (NAS) Configuration parameter handling p. 331
| 12.1 | EFNASCONFIG - NAS signalling priority handling p. 331
|
| 12.2 | EFNASCONFIG - NMO I Network Mode of Operation I handling p. 331
|
| 12.3 | EFNASCONFIG - Attach with IMSI handling p. 331
|
| 12.4 | EFNASCONFIG - Verifying Minimum Periodic Search Timer p. 331
|
| 12.5 | EFNASCONFIG - Extended access barring handling p. 332
|
| 12.6 | EFNASCONFIG - Verifying Timer T3245 Behaviour p. 332
|
| 12.7 | EFNASCONFIG - Override NAS signalling low priority p. 332
|
| 12.8 | EFNASCONFIG - Override Extended access barring p. 332
|
| 12.9 | EFNASCONFIG - Fast First Higher Priority PLMN Search p. 332
|
| 12.10 | EFNASCONFIG - E-UTRA Disabling Allowed for EMM cause #15 p. 332
|
| 12.11 | EFNASCONFIG - SM_RetryWaitTime p. 332
|
| 12.12 | EFNASCONFIG - SM_RetryAtRATChange p. 332
|
|
| 13 | UICC interface during PSM p. 332
| 13.1 | UICC interface in PSM handling for E-UTRAN - No UICC deactivation in PSM p. 332
| 13.1.1 | Definition and applicability p. 332
|
| 13.1.2 | Conformance requirement p. 333
|
| 13.1.3 | Test purpose p. 333
|
| 13.1.4 | Method of test p. 333
| 13.1.4.1 | Initial conditions p. 333
|
| 13.1.4.2 | Procedure p. 333
|
|
| 13.1.5 | Acceptance criteria p. 334
|
|
| 13.2 | UICC interface in PSM handling for E-UTRAN - PSM not accepted by E-USS/NB-SS p. 334
| 13.2.1 | Definition and applicability p. 334
|
| 13.2.2 | Conformance requirement p. 334
|
| 13.2.3 | Test purpose p. 334
|
| 13.2.4 | Method of test p. 334
| 13.2.4.1 | Initial conditions p. 334
|
| 13.2.4.2 | Procedure p. 335
|
|
| 13.2.5 | Acceptance criteria p. 335
|
|
| 13.3 | UICC interface in PSM handling for E-UTRAN - UICC deactivation in PSM p. 335
|
| 13.4 | UICC interface in PSM for E-UTRAN - SUSPEND UICC p. 336
| 13.4.1 | Definition and applicability p. 336
|
| 13.4.2 | Conformance requirement p. 336
|
| 13.4.3 | Test purpose p. 336
|
| 13.4.4 | Method of test p. 336
| 13.4.4.1 | Initial conditions p. 336
|
| 13.4.4.2 | Procedure p. 337
|
|
| 13.4.5 | Acceptance criteria p. 337
|
|
|
| 14 | UICC interface during eDRX p. 337
| 14.1 | UICC interface during eDRX for E-UTRAN - eDRX is not supported by the UICC p. 337
| 14.1.1 | Definition and applicability p. 337
|
| 14.1.2 | Conformance requirement p. 338
|
| 14.1.3 | Test purpose p. 338
|
| 14.1.4 | Method of test p. 338
| 14.1.4.1 | Initial conditions p. 338
|
| 14.1.4.2 | Procedure p. 338
|
|
| 14.1.5 | Acceptance criteria p. 339
|
|
| 14.2 | UICC interface during eDRX for E UTRAN - eDRX is not accepted by E USS/NB SS p. 339
| 14.2.1 | Definition and applicability p. 339
|
| 14.2.2 | Conformance requirement p. 339
|
| 14.2.3 | Test purpose p. 340
|
| 14.2.4 | Method of test p. 340
| 14.2.4.1 | Initial conditions p. 340
|
| 14.2.4.2 | Procedure p. 340
|
|
| 14.2.5 | Acceptance criteria p. 341
|
|
| 14.3 | UICC interface during eDRX for E UTRAN - UICC deactivation during eDRX p. 341
|
| 14.4 | UICC interface during eDRX for E UTRAN- SUSPEND UICC p. 341
|
|
| 15 | Authentication procedure and NAS security context handling for 5G p. 341
| 15.1 | Authentication procedure for EAP-AKA' p. 341
| 15.1.1 | Authentication procedure for EAP-AKA' - Authentication is successful p. 341
| 15.1.1.1 | Definition and applicability p. 341
|
| 15.1.1.2 | Conformance requirement p. 342
|
| 15.1.1.3 | Test purpose p. 342
|
| 15.1.1.4 | Method of test p. 343
| 15.1.1.4.1 | Initial conditions p. 343
|
| 15.1.1.4.2 | Procedure p. 343
|
|
| 15.1.1.5 | Acceptance criteria p. 344
|
|
| 15.1A.1 | Authentication procedure for EAP-AKA' - Authentication is successful p. 345
| 15.1A.1.1 | Definition and applicability p. 345
|
| 15.1A.1.2 | Conformance requirement p. 345
|
| 15.1A.1.3 | Test purpose p. 346
|
| 15.1A.1.4 | Method of test p. 346
| 15.1A.1.4.1 | Initial conditions p. 346
|
| 15.1A.1.4.2 | Procedure p. 346
|
|
| 15.1A.1.5 | Acceptance criteria p. 347
|
|
| 15.1.2 | Authentication procedure for EAP-AKA' - Authentication is successful - GSM UICC p. 348
| 15.1.2.1 | Definition and applicability p. 348
|
| 15.1.2.2 | Conformance requirement p. 348
|
| 15.1.2.3 | Test purpose p. 349
|
| 15.1.2.4 | Method of test p. 349
| 15.1.2.4.1 | Initial conditions p. 349
|
| 15.1.2.4.2 | Procedure p. 349
|
|
| 15.1.2.5 | Acceptance criteria p. 350
|
|
| 15.1.3 | Authentication procedure for EAP-AKA' - AUTN fails on the USIM p. 350
| 15.1.3.1 | Definition and applicability p. 350
|
| 15.1.3.2 | Conformance requirement p. 351
|
| 15.1.3.3 | Test purpose p. 351
|
| 15.1.3.4 | Method of test p. 351
| 15.1.3.4.1 | Initial conditions p. 351
|
| 15.1.3.4.2 | Procedure p. 351
|
|
| 15.1.3.5 | Acceptance criteria p. 352
|
|
| 15.1.4 | Authentication procedure for EAP-AKA' - after SUPI is changed p. 352
| 15.1.4.1 | Definition and applicability p. 352
|
| 15.1.4.2 | Conformance requirement p. 353
|
| 15.1.4.3 | Test purpose p. 353
|
| 15.1.4.4 | Method of test p. 353
| 15.1.4.4.2 | Procedure p. 353
|
|
| 15.1.4.5 | Acceptance criteria p. 355
|
|
|
| 15.2 | Authentication procedure for 5G AKA p. 355
| 15.2.1 | Authentication procedure for 5G AKA - Authentication is successful p. 355
| 15.2.1.4 | Method of test p. 356
| 15.2.1.4.1 | Initial conditions p. 356
|
|
| 15.2.1.5 | Acceptance criteria p. 357
|
|
| 15.2A.1 | Authentication procedure for 5G AKA - Authentication is successful p. 358
| 15.2A.1.4 | Method of test p. 359
| 15.2A.1.4.1 | Initial conditions p. 359
|
|
| 15.2A.1.5 | Acceptance criteria p. 360
|
|
| 15.2.2 | Authentication procedure for 5G AKA - Authentication is successful - GSM UICC p. 361
| 15.2.2.1 | Definition and applicability p. 361
|
| 15.2.2.2 | Conformance requirement p. 361
|
| 15.2.2.3 | Test purpose p. 362
|
| 15.2.2.4 | Method of test p. 362
| 15.2.2.4.1 | Initial conditions p. 362
|
| 15.2.2.4.2 | Procedure p. 362
|
|
| 15.2.2.5 | Acceptance criteria p. 363
|
|
| 15.2A.2 | Authentication procedure for 5G AKA - Authentication is successful p. 363
| 15.2A.2.1 | Definition and applicability p. 363
|
| 15.2A.2.2 | Conformance requirement p. 364
|
| 15.2A.2.3 | Test purpose p. 364
|
| 15.2A.2.4 | Method of test p. 364
| 15.2A.2.4.1 | Initial conditions p. 364
|
| 15.2A.2.4.2 | Procedure p. 364
|
|
| 15.2A.2.5 | Acceptance criteria p. 365
|
|
| 15.2.3 | Authentication procedure 5G AKA - AUTN fails on the USIM p. 365
| 15.2.3.1 | Definition and applicability p. 365
|
| 15.2.3.2 | Conformance requirement p. 366
|
| 15.2.3.3 | Test purpose p. 366
|
| 15.2.3.4 | Method of test p. 366
| 15.2.3.4.1 | Initial conditions p. 366
|
| 15.2.3.4.2 | Procedure p. 366
|
|
| 15.2.3.5 | Acceptance criteria p. 367
|
|
| 15.2.4 | Authentication procedure for 5G AKA - after SUPI is changed p. 368
| 15.2.4.1 | Definition and applicability p. 368
|
| 15.2.4.2 | Conformance requirement p. 368
|
| 15.2.4.3 | Test purpose p. 368
|
| 15.2.4.4 | Method of test p. 368
| 15.2.4.4.1 | Initial conditions p. 368
|
| 15.2.4.4.2 | Procedure p. 369
|
|
| 15.2.4.5 | Acceptance criteria p. 370
|
| 15.2.5.2 | Conformance requirement p. 371
|
| 15.2.5.4 | Method of test p. 372
| 15.2.5.4.1 | Initial conditions p. 372
|
| 15.2.5.4.2 | Procedure p. 372
|
|
| 15.2.5.5 | Acceptance criteria p. 373
|
|
|
|
| 16 | UE Route Selection Policy (URSP) procedure p. 376
| 16.1 | Pre-configured URSP rules p. 376
| 16.1.1 | Support for URSP by USIM p. 376
| 16.1.1.1 | Definition and applicability p. 376
|
| 16.1.1.2 | Conformance requirement p. 376
|
| 16.1.1.3 | Test purpose p. 376
|
| 16.1.1.4 | Method of test p. 377
| 16.1.1.4.1 | Initial conditions p. 377
|
| 16.1.1.4.2 | Procedure p. 378
|
|
| 16.1.1.5 | Acceptance criteria p. 378
|
|
| 16.1.2 | Support for URSP by ME p. 379
| 16.1.2.1 | Definition and applicability p. 379
|
| 16.1.2.2 | Conformance requirement p. 379
|
| 16.1.2.3 | Test purpose p. 379
|
| 16.1.2.4 | Method of test p. 379
| 16.1.2.4.1 | Initial conditions p. 379
|
| 16.1.2.4.2 | Procedure p. 380
|
|
| 16.1.2.5 | Acceptance criteria p. 380
|
|
| 16.1.3 | Support of Signalled URSP p. 381
| 16.1.3.1 | Definition and applicability p. 381
|
| 16.1.3.2 | Conformance requirement p. 381
|
| 16.1.3.3 | Test purpose p. 381
|
| 16.1.3.4 | Method of test p. 381
| 16.1.3.4.1 | Initial conditions p. 381
|
| 16.1.3.4.2 | Procedure p. 382
|
|
| 16.1.3.5 | Acceptance criteria p. 383
|
|
|
|
| 17 | CAG list handling p. 383
| 17.1 | CAG list handling for 5G p. 383
| 17.1.1 | Automatic CAG selection with preconfigured CAG list on USIM p. 383
| 17.1.1.1 | Definition and applicability p. 383
|
| 17.1.1.2 | Conformance requirement p. 383
|
| 17.1.1.3 | Test purpose p. 384
|
| 17.1.1.4 | Method of tests p. 384
| 17.1.1.4.1 | Initial conditions p. 384
|
| 17.1.1.4.2 | Procedure p. 384
|
|
| 17.1.1.5 | Acceptance criteria p. 385
|
|
|
|
| 18 | NSSAA procedure with SSIM p. 385
| 18.1 | SSIM management procedures p. 385
| 18.1.1 | SSIM identification, S-NSSAI list request p. 385
| 18.1.1.1 | Definition and applicability p. 385
|
| 18.1.1.2 | Conformance requirement p. 385
|
| 18.1.1.3 | Test purpose p. 386
|
| 18.1.1.4 | Method of tests p. 386
| 18.1.1.4.1 | Initial conditions p. 386
|
| 18.1.1.4.2 | Procedure p. 387
|
| 18.1.1.4.3 | Acceptance criteria p. 388
|
|
|
|
| 18.2 | SSIM commands p. 388
| 18.2.1 | AUTHENTICATE command, Identity EAP-Request/EAP-Response messages p. 388
| 18.2.1.1 | Definition and applicability p. 388
|
| 18.2.1.2 | Conformance requirement p. 389
|
| 18.2.1.3 | Test purpose p. 389
|
| 18.2.1.4 | Method of tests p. 389
| 18.2.1.4.1 | Initial conditions p. 389
|
| 18.2.1.4.2 | Procedure p. 389
|
| 18.2.1.4.3 | Acceptance criteria p. 390
|
|
|
| 18.2.2 | AUTHENTICATE command, other EAP-Request/EAP-Response messages p. 390
| 18.2.2.1 | Definition and applicability p. 390
|
| 18.2.2.2 | Conformance requirement p. 391
|
| 18.2.2.3 | Test purpose p. 391
|
| 18.2.2.4 | Method of tests p. 391
| 18.2.2.4.1 | Initial conditions p. 391
|
| 18.2.2.4.2 | Procedure p. 391
|
| 18.2.2.4.3 | Acceptance criteria p. 391
|
|
|
| 18.2.3 | AUTHENTICATE command, EAP-Success/EAP-Failure messages p. 392
| 18.2.3.1 | Definition and applicability p. 392
|
| 18.2.3.2 | Conformance requirement p. 392
|
| 18.2.3.3 | Test purpose p. 392
|
| 18.2.3.4 | Method of tests p. 392
| 18.2.3.4.1 | Initial conditions p. 392
|
| 18.2.3.4.2 | Procedure p. 392
|
| 18.2.3.4.3 | Acceptance criteria p. 393
|
|
|
|
|
| A | Suggested requirements lists for Test Applet functionality p. 393
| A.1 | General requirements p. 393
|
| A.2 | Test instruction or input data requirements p. 394
| A.2.1 | Test instruction or input data requirements list-1 p. 394
|
| A.2.2 | Test instruction or input data requirements list-2 p. 394
|
|
| A.3 | APDU content verification requirements p. 394
| A.3.1 | APDU content verification requirements list-1 p. 394
|
| A.3.2 | APDU content verification requirements list-2 p. 395
|
|
|
| B | Examples of Test EFs in the Test-nrUICC configuration p. 395
| B.1 | Test EF structure - 1 p. 395
| B.1.1 | EFSTK (SIMToolkit data) p. 396
|
| B.1.2 | EFSETSTK (Set SIM Toolkit) p. 396
|
| B.1.3 | EFCC (CALL CONTROL) p. 397
|
| B.1.4 | EFEVENTLIST (EVENT LIST) p. 397
|
|
| B.2 | Test EF structure - 2 p. 397
| B.2.1 | EFTC_IN (Test Case Input) p. 398
|
| B.2.2 | EFTC_OUT (Test Case Output) p. 399
|
| B.2.3 | EFEF_RESET (EF_RESET) p. 399
|
|
|
| C | Add a title p. 401
| C.1 | 5G-NR generic procedure for 5G Registration on 3GPP access with IMS service p. 401
| C.1.1 | 'voice centric' Procedure p. 401
|
|
|
| D | APDU logging in seamless testing p. 402
| D.1 | Example of SIM APDU logging via AT interface p. 402
|
|
| $ | Change history p. 403
|
