RFC 1593
SNA APPN Node MIB
Pages: 120
Informational
Informational
Part 2 of 4 – Pages 27 to 50
ibmappnNodeLsMigration OBJECT-TYPE
SYNTAX INTEGER {yes(1), no(2)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this link station will be used
for connections to down-level or migration partners."
::= { ibmappnNodeLsEntry 9 }
ibmappnNodeLsBlockNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The block number is the first three digits of the node_id.
These 3 hexideimal digits identify the product and are not
configurable."
::= { ibmappnNodeLsEntry 10 }
ibmappnNodeLsIdNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (5))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is
include in APPN alerts as well as being included in XIDs.
A unique value is required for connections to SNA
sub-area."
::= { ibmappnNodeLsEntry 11 }
ibmappnNodeLsCpCpSession OBJECT-TYPE
SYNTAX INTEGER {yes(1), no(2)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether CP-CP sessions are
supported by this link station."
::= { ibmappnNodeLsEntry 12 }
ibmappnNodeLsTargetPacingCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Numeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performed."
::= { ibmappnNodeLsEntry 13 }
ibmappnNodeLsMaxSendBtuSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Numeric value between 0 and 32767 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assigned value."
::= { ibmappnNodeLsEntry 14 }
ibmappnNodeLsEffCap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 15 }
ibmappnNodeLsConnCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 16 }
ibmappnNodeLsByteCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 17 }
ibmappnNodeLsSecurity OBJECT-TYPE
SYNTAX INTEGER {
nonsecure(1), --X'01'
publicSwitchedNetwork(32), --X'20'
undergroundCable(64), --X'40'
secureConduit(96), --X'60'
guardedConduit(128), --X'80'
encrypted(160), --X'A0'
guardedRadiation(192) --X'C0'
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 18 }
ibmappnNodeLsDelay OBJECT-TYPE
SYNTAX INTEGER {
minimum(0), --X'00'
negligible(384), --X'4C'
terrestrial(9216), --X'71'
packet(147456), --X'91'
long(294912), --X'99'
maximum(2013265920) --X'FF'
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 19 }
ibmappnNodeLsUsr1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 20 }
ibmappnNodeLsUsr2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 21 }
ibmappnNodeLsUsr3 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station."
::= { ibmappnNodeLsEntry 22 }
ibmappnNodeLsInXidBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of XID bytes received."
::= { ibmappnNodeLsEntry 23 }
ibmappnNodeLsInMsgBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of message (I-frame) bytes received."
::= { ibmappnNodeLsEntry 24 }
ibmappnNodeLsInXidFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of XID frames received."
::= { ibmappnNodeLsEntry 25 }
ibmappnNodeLsInMsgFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of message (I-frame) frames received."
::= { ibmappnNodeLsEntry 26 }
ibmappnNodeLsOutXidBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of XID bytes sent."
::= { ibmappnNodeLsEntry 27 }
ibmappnNodeLsOutMsgBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of message (I-frame) bytes sent."
::= { ibmappnNodeLsEntry 28 }
ibmappnNodeLsOutXidFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of XID frames sent."
::= { ibmappnNodeLsEntry 29 }
ibmappnNodeLsOutMsgFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of message (I-frame) frames sent."
::= { ibmappnNodeLsEntry 30 }
ibmappnNodeLsEchoRsps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of responses returned from adjacent link station.
A response should be returned for each test frame sent by
this node.
Test frames are sent to adjacent nodes periodically to
verify connectivity and to measure that actual round trip
time, that is the time the test frame is sent until the
response is received."
::= { ibmappnNodeLsEntry 31 }
ibmappnNodeLsCurrentDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time that it took for the last test signal to be
sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds."
::= { ibmappnNodeLsEntry 32 }
ibmappnNodeLsMaxDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The longest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds ."
::= { ibmappnNodeLsEntry 33 }
ibmappnNodeLsMinDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The shortest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds."
::= { ibmappnNodeLsEntry 34 }
ibmappnNodeLsMaxDelayTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (since system up in hundredth of seconds)
when the longest delay occurred.
This time can be used to identify when this high
water mark occurred in relation to the last initialization
of the APPN node."
::= { ibmappnNodeLsEntry 35 }
ibmappnNodeLsGoodXids OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of successful XIDs that have occurred
on this link station since the time it was started."
::= { ibmappnNodeLsEntry 36 }
ibmappnNodeLsBadXids OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of unsuccessful XIDs that have occurred
on this link station since the time it was started."
::= { ibmappnNodeLsEntry 37 }
ibmappnNodeLsSpecific OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the DLC specific OBJECT IDENTIFIER
that can provide additional information."
::= { ibmappnNodeLsEntry 38 }
ibmappnNodeLsSubState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
sentReqOpnstn(2),
pendXidExch(3),
sentActAs(4),
sentSetMode(5),
active(6),
sentDeactAsOrd(7),
sentDiscOrd(8),
sentDestroyTg(9),
sentCreateTg(10),
sentConnReq(11),
pendRcvConnInd(12),
pendSendConnRsp(13),
sentConnRsp(14),
pendDeact(15)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of this link station."
::= { ibmappnNodeLsEntry 39 }
ibmappnNodeLsStartTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredth of seconds) this link station
has been active the last time since the time APPN was
initialized."
::= { ibmappnNodeLsEntry 40 }
ibmappnNodeLsActiveTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredth of seconds) this link station
has been in the active state.
A zero value indicates the link station has never been
active."
::= { ibmappnNodeLsEntry 41 }
ibmappnNodeLsCurrentStateTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredth of seconds) the link station is
in the current state."
::= { ibmappnNodeLsEntry 42 }
-- **************************************************************
-- Link station table (TCP/IP specific)
--
ibmappnNodeLsIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmappnNodeLsIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Link station table (TCP/IP specific)."
::= { ibmappnLinkStationInformation 2 }
ibmappnNodeLsIpEntry OBJECT-TYPE
SYNTAX IbmappnNodeLsIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The IP Name is used as the index to this table."
INDEX
{ibmappnNodeLsIpName }
::= { ibmappnNodeLsIpTable 1 }
IbmappnNodeLsIpEntry ::= SEQUENCE {
ibmappnNodeLsIpName DisplayString,
ibmappnNodeLsIpState INTEGER,
ibmappnNodeLsLocalIpAddr IpAddress,
ibmappnNodeLsLocalIpPortNum INTEGER,
ibmappnNodeLsRemoteIpAddr IpAddress,
ibmappnNodeLsRemoteIpPortNum INTEGER
}
ibmappnNodeLsIpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively-assigned name for this link station. The
name can be from one to eight characters."
::= { ibmappnNodeLsIpEntry 1 }
ibmappnNodeLsIpState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
pendactive(2),
active(3),
pendinact(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of this link station."
::= { ibmappnNodeLsIpEntry 2 }
ibmappnNodeLsLocalIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local IP address."
::= { ibmappnNodeLsIpEntry 3 }
ibmappnNodeLsLocalIpPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local TCP/IP port number.
The default listening port will be administratively
assigned and will dynamically change if this node
initiates a session with adjacent node."
::= { ibmappnNodeLsIpEntry 4 }
ibmappnNodeLsRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote IP address."
::= { ibmappnNodeLsIpEntry 5 }
ibmappnNodeLsRemoteIpPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote TCP/IP port number."
::= { ibmappnNodeLsIpEntry 6 }
-- **************************************************************
-- Ls Table (DLS specific)
--
ibmappnNodeLsDlsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmappnNodeLsDlsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ls Table (DLS specific)."
::= { ibmappnLinkStationInformation 3 }
ibmappnNodeLsDlsEntry OBJECT-TYPE
SYNTAX IbmappnNodeLsDlsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The DLS Name is used as the index to this table."
INDEX
{ibmappnNodeLsDlsName }
::= { ibmappnNodeLsDlsTable 1 }
IbmappnNodeLsDlsEntry ::= SEQUENCE {
ibmappnNodeLsDlsName DisplayString,
ibmappnNodeLsDlsState INTEGER,
ibmappnNodeLsLocalDlsMac OCTET STRING,
ibmappnNodeLsLocalDlsSap OCTET STRING,
ibmappnNodeLsRemoteDlsMac OCTET STRING,
ibmappnNodeLsRemoteDlsSap OCTET STRING
}
ibmappnNodeLsDlsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively-assigned name for this link station.
The name can be from one to eight characters."
::= { ibmappnNodeLsDlsEntry 1 }
ibmappnNodeLsDlsState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
pendactive(2),
active(3),
pendinact(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of this link station."
::= { ibmappnNodeLsDlsEntry 2 }
ibmappnNodeLsLocalDlsMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local MAC address."
::= { ibmappnNodeLsDlsEntry 3 }
ibmappnNodeLsLocalDlsSap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local SAP address."
::= { ibmappnNodeLsDlsEntry 4 }
ibmappnNodeLsRemoteDlsMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote MAC address."
::= { ibmappnNodeLsDlsEntry 5 }
ibmappnNodeLsRemoteDlsSap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote SAP address."
::= { ibmappnNodeLsDlsEntry 6 }
-- **************************************************************
-- Ls Table (Token Ring specific)
--
ibmappnNodeLsTrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmappnNodeLsTrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ls Table (Token Ring specific)."
::= { ibmappnLinkStationInformation 4 }
ibmappnNodeLsTrEntry OBJECT-TYPE
SYNTAX IbmappnNodeLsTrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The TR Name is used as the index to this table."
INDEX
{ibmappnNodeLsTrName }
::= { ibmappnNodeLsTrTable 1 }
IbmappnNodeLsTrEntry ::= SEQUENCE {
ibmappnNodeLsTrName DisplayString,
ibmappnNodeLsTrState INTEGER,
ibmappnNodeLsLocalTrMac OCTET STRING,
ibmappnNodeLsLocalTrSap OCTET STRING,
ibmappnNodeLsRemoteTrMac OCTET STRING,
ibmappnNodeLsRemoteTrSap OCTET STRING
}
ibmappnNodeLsTrName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively-assigned name for this link station.
The name can be from one to eight characters."
::= { ibmappnNodeLsTrEntry 1 }
ibmappnNodeLsTrState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
pendactive(2),
active(3),
pendinact(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of this link station."
::= { ibmappnNodeLsTrEntry 2 }
ibmappnNodeLsLocalTrMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local MAC address."
::= { ibmappnNodeLsTrEntry 3 }
ibmappnNodeLsLocalTrSap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local SAP address."
::= { ibmappnNodeLsTrEntry 4 }
ibmappnNodeLsRemoteTrMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote MAC address."
::= { ibmappnNodeLsTrEntry 5 }
ibmappnNodeLsRemoteTrSap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote SAP address."
::= { ibmappnNodeLsTrEntry 6 }
-- **************************************************************
-- This table provides information about errors this node encountered
-- with connections to adjacent nodes. This includes all exceptional
-- conditions encountered establishing connections and all exceptional
-- conditions that result in terminating the connection.
-- **************************************************************
ibmappnNodeLsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmappnNodeLsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information related to exceptional
and potential exceptional conditions that occur during
the activation, XID exchange, and termination of the
connection."
::= { ibmappnLinkStationInformation 5 }
ibmappnNodeLsStatusEntry OBJECT-TYPE
SYNTAX IbmappnNodeLsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is indexed by the LsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps. This provides the management station the ability
to retrieve only the updates to the table by using the
standard GET NEXT."
INDEX
{ ibmappnNodeLsStatusIndex }
::= { ibmappnNodeLsStatusTable 1 }
IbmappnNodeLsStatusEntry ::= SEQUENCE {
ibmappnNodeLsStatusIndex INTEGER,
ibmappnNodeLsStatusTime TimeTicks,
ibmappnNodeLsStatusLsName DisplayString,
ibmappnNodeLsStatusCpName DisplayString,
ibmappnNodeLsStatusNodeId OCTET STRING,
ibmappnNodeLsStatusTgNum INTEGER,
ibmappnNodeLsStatusGeneralSense OCTET STRING,
ibmappnNodeLsStatusNofRetry INTEGER,
ibmappnNodeLsStatusEndSense OCTET STRING,
ibmappnNodeLsStatusXidLocalSense OCTET STRING,
ibmappnNodeLsStatusXidRemoteSense OCTET STRING,
ibmappnNodeLsStatusXidByteInError INTEGER,
ibmappnNodeLsStatusXidBitInError INTEGER,
ibmappnNodeLsStatusDlcType INTEGER,
ibmappnNodeLsStatusLocalAddr DisplayString,
ibmappnNodeLsStatusRemoteAddr DisplayString
}
ibmappnNodeLsStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This index is continuous index this table."
::= { ibmappnNodeLsStatusEntry 1 }
ibmappnNodeLsStatusTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time (in hundreds of a second) since this node was last
initialized."
::= { ibmappnNodeLsStatusEntry 2 }
ibmappnNodeLsStatusLsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively-assigned name for this link station."
::= { ibmappnNodeLsStatusEntry 3 }
ibmappnNodeLsStatusCpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Administratively-assigned fully-qualified name of the
adjacent node partner. This will be provided when the
adjacent node has been defined at this node or when the
XID sequence has proceeded far enough to to identify the
adjacent node. A blank CP name will indicate the name is
unknown."
::= { ibmappnNodeLsStatusEntry 4 }
ibmappnNodeLsStatusNodeId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Adjacent Node id"
::= { ibmappnNodeLsStatusEntry 5 }
ibmappnNodeLsStatusTgNum OBJECT-TYPE
SYNTAX INTEGER (0..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number associated with the TG to this link station
with a range from 0 to 256. A value of 256 indicates
the tg number has not been negotiated and is unknown at
this time."
::= { ibmappnNodeLsStatusEntry 6 }
ibmappnNodeLsStatusGeneralSense OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The error sense code associated with the start sequence of
activation of a link up to the beginning of the XID
sequence."
::= { ibmappnNodeLsStatusEntry 7 }
ibmappnNodeLsStatusNofRetry OBJECT-TYPE
SYNTAX INTEGER {
retry(1),
noretry(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether Node Operator Facility will retry the
start request to activate the link."
::= { ibmappnNodeLsStatusEntry 8 }
ibmappnNodeLsStatusEndSense OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sense code associated with the termination of the link
connection to adjacent node. This includes all sense
information included in the disconnect recieved from the
lower layer DLCs and also sense information indicating the
link termination originated by upper layer APPN components."
::= { ibmappnNodeLsStatusEntry 9 }
ibmappnNodeLsStatusXidLocalSense OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The error sense code associated with the rejection of the
XID."
::= { ibmappnNodeLsStatusEntry 10 }
ibmappnNodeLsStatusXidRemoteSense OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The error sense code adjacent node returned to this node
indicating the reason the XID was rejected."
::= { ibmappnNodeLsStatusEntry 11 }
ibmappnNodeLsStatusXidByteInError OBJECT-TYPE
SYNTAX INTEGER {
na(1000)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This identifies the actual byte in the XID that caused the
error. The value of zero (0) indicates that the variable
has no meaning."
::= { ibmappnNodeLsStatusEntry 12 }
ibmappnNodeLsStatusXidBitInError OBJECT-TYPE
SYNTAX INTEGER {
na(8) -- not applicable
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This identifies the actual bit within the error byte of the
XID. This only has meaning when the byte in error is
greater than zero."
::= { ibmappnNodeLsStatusEntry 13 }
ibmappnNodeLsStatusDlcType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
sdlc(2),
dls(3),
socket(4),
ethernet(5),
tr(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This identifies DLC type that was being used when error
occurred. This also is used to the format of the
local and remote address provided.
other = free form DisplayString
ip = ld. ld. ld. ld / 2d
tr = lx: lx: lx: lx: lx: lx . lx
dlsw = lx: lx: lx: lx: lx: lx . lx
ethernet = lx: lx: lx: lx: lx: lx . lx
"
::= { ibmappnNodeLsStatusEntry 14 }
ibmappnNodeLsStatusLocalAddr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format."
::= { ibmappnNodeLsStatusEntry 15 }
ibmappnNodeLsStatusRemoteAddr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format."
::= { ibmappnNodeLsStatusEntry 16 }
-- **************************************************************
-- APPN SNMP Performance Information
--
ibmappnSnmpInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of messages delivered to the APPN SNMP sub-agent."
::= { ibmappnSnmpInformation 1 }
ibmappnSnmpInGetRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of GET requests delivered to the APPN SNMP
sub-agent."
::= { ibmappnSnmpInformation 2 }
ibmappnSnmpInGetNexts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of GETNEXT requests delivered to the APPN SNMP
sub-agent."
::= { ibmappnSnmpInformation 3 }
ibmappnSnmpInSetRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of SET requests delivered to the APPN SNMP
sub-agent."
::= { ibmappnSnmpInformation 4 }
ibmappnSnmpInTotalVars OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of VARIABLES included in both
GET and GETNEXT requests to the APPN SNMP sub-agent."
::= { ibmappnSnmpInformation 5 }
ibmappnSnmpInGetVars OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of VARIBLES included in all
GET requests to the APPN SNMP sub-agent."
::= { ibmappnSnmpInformation 6 }
ibmappnSnmpInGetNextVars OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of VARIABLES included in all
GETNEXT requests to the APPN SNMP sub-agent."
::= { ibmappnSnmpInformation 7 }
ibmappnSnmpInSetVars OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of VARIBLES included in all
SET requests to the APPN SNMP sub-agent."
::= { ibmappnSnmpInformation 8 }
ibmappnSnmpOutNoSuchNames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of VARIABLES that could not
be found by the APPN SNMP sub-agent."
::= { ibmappnSnmpInformation 9 }
ibmappnSnmpOutGenErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of undefined errors that
occurred processing SNMP request to the
APPN SNMP sub-agent."
::= { ibmappnSnmpInformation 10 }
-- **************************************************************
-- This group provides global information about the
-- APPN node performance.
-- The first section applies to the APPN control point
-- storage utilization.
ibmappnMemorySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Size of the shared storage segment, as obtained
by storage management from the underlying operating
system."
::= { ibmappnMemoryUse 1 }
ibmappnMemoryUsed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of bytes in the segment that are currently
allocated to process."
::= { ibmappnMemoryUse 2 }
ibmappnMemoryWarnThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Allocation threshold beyond which storage
management considers the storage resources
to be constrained."
::= { ibmappnMemoryUse 3 }
ibmappnMemoryCritThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Allocation threshold beyond which storage
management considers the storage resources
to be critically constrained."
::= { ibmappnMemoryUse 4 }
-- **************************************************************
-- The following are Counters maintained by the APPN CS component that
-- relate to total overall XID activity.
------------------------------------------------------------------------
ibmappnNodeDefLsGoodXids OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of successfull XIDs that have occurred
on all defined link stations since the last time this
node was initialized."
::= { ibmappnXidInformation 1 }
ibmappnNodeDefLsBadXids OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of unsuccessfull XIDs that have
occurred on all defined link stations since the last
time this node was initialized."
::= { ibmappnXidInformation 2 }
ibmappnNodeDynLsGoodXids OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of successfull XIDs that have
occurred on all dynamic link stations since the last
time this node was initialized."
::= { ibmappnXidInformation 3 }
(next page on part 3)