tech-invite   World Map
3GPP     Specs     Glossaries     UICC       IETF     RFCs     Groups     SIP     ABNFs       T+       Search     Home

RFC 3287

 
 
 

Remote Monitoring MIB Extensions for Differentiated Services

Part 4 of 5, p. 75 to 108
Prev RFC Part       Next RFC Part

 


prevText      Top      Up      ToC       Page 75 
dsmonMatrixCtlMaxDesiredEntries OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 1..2147483647)
    UNITS       "table entries"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The maximum number of entries that are desired in the
            dsmonMatrix tables on behalf of this control entry.  The
            probe will not create more than this number of associated
            entries in these tables, but may choose to create fewer
            entries in this table for any reason including the lack of
            resources.

            If this value is set to -1, the probe may create any number
            of entries in this table.

            This object MUST NOT be modified if the associated
            dsmonMatrixCtlStatus object is equal to active(1)."
    ::= { dsmonMatrixCtlEntry 4 }

dsmonMatrixCtlDroppedFrames OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The total number of frames which were received by the probe
            and therefore not accounted for in the *StatsDropEvents, but
            for which the probe chose not to count for the associated
            dsmonMatrixSD and dsmonMatrixDS entries for whatever reason.
            Most often, this event occurs when the probe is out of some
            resources and decides to shed load from this collection.

            This count does not include packets that were not counted
            because they had MAC-layer errors.

            Note that if the dsmonMatrix tables are inactive because no
            appropriate protocols are enabled in the protocol directory,
            this value SHOULD be 0.

            Note that, unlike the dropEvents counter, this number is the
            exact number of frames dropped."
    ::= { dsmonMatrixCtlEntry 5 }

dsmonMatrixCtlInserts OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "table entries"
    MAX-ACCESS read-only

Top      Up      ToC       Page 76 
    STATUS     current
    DESCRIPTION
            "The number of times a dsmonMatrix entry has been inserted
            into the dsmonMatrix tables.  If an entry is inserted, then
            deleted, and then inserted, this counter will be incremented
            by 2.  The addition of a conversation into both the
            dsmonMatrixSDTable and dsmonMatrixDSTable shall be counted
            as two insertions (even though every addition into one table
            must be accompanied by an insertion into the other).

            To allow for efficient implementation strategies, agents may
            delay updating this object for short periods of time.  For
            example, an implementation strategy may allow internal data
            structures to differ from those visible via SNMP for short
            periods of time.  This counter may reflect the internal data
            structures for those short periods of time.  Note that the
            sum of the dsmonMatrixSDTable and dsmonMatrixDSTable sizes
            can be determined by subtracting dsmonMatrixCtlDeletes from
            dsmonMatrixCtlInserts."
    ::= { dsmonMatrixCtlEntry 6 }

dsmonMatrixCtlDeletes OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "table entries"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of times a dsmonMatrix entry has been deleted
            from the dsmonMatrix tables (for any reason).  If an entry
            is deleted, then inserted, and then deleted, this counter
            will be incremented by 2.  The deletion of a conversation
            from both the dsmonMatrixSDTable and dsmonMatrixDSTable
            shall be counted as two deletions (even though every
            deletion from one table must be accompanied by a deletion
            from the other).

            To allow for efficient implementation strategies, agents MAY
            delay updating this object for short periods of time.  For
            example, an implementation strategy may allow internal data
            structures to differ from those visible via SNMP for short
            periods of time.  This counter may reflect the internal data
            structures for those short periods of time.

            Note that the sum of the dsmonMatrixSDTable and
            dsmonMatrixDSTable sizes can be determined by subtracting
            dsmonMatrixCtlDeletes from dsmonMatrixCtlInserts."
    ::= { dsmonMatrixCtlEntry 7 }

Top      Up      ToC       Page 77 
dsmonMatrixCtlCreateTime OBJECT-TYPE
    SYNTAX     LastCreateTime
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The value of sysUpTime when this control entry was last
            activated.  This can be used by the management station to
            detect if the table has been deleted and recreated between
            polls."
    ::= { dsmonMatrixCtlEntry 8 }

dsmonMatrixCtlOwner OBJECT-TYPE
    SYNTAX      OwnerString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The entity that configured this entry and is therefore
            using the resources assigned to it."
    ::= { dsmonMatrixCtlEntry 9 }

dsmonMatrixCtlStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The status of this dsmonMatrixCtlEntry.

            An entry MUST NOT exist in the active state unless all
            objects in the entry have an appropriate value.

            If this object is not equal to active(1), all associated
            entries in the dsmonMatrixSDTable and dsmonMatrixDSTable
            shall be deleted."
    ::= { dsmonMatrixCtlEntry 10 }

--
-- AL Matrix SD Statistics Table
--

dsmonMatrixSDTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DsmonMatrixSDEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of application traffic matrix entries which collect
            statistics for conversations of a particular application
            protocol between two network-level addresses.  This table is
            indexed first by the source address and then by the

Top      Up      ToC       Page 78 
            destination address to make it convenient to collect all
            statistics from a particular address.

            The probe will add to this table all pairs of addresses for
            all protocols seen in all packets with no MAC errors, and
            will increment octet and packet counts in the table for all
            packets with no MAC errors."
    ::= { dsmonMatrixObjects 2 }

dsmonMatrixSDEntry OBJECT-TYPE
    SYNTAX      DsmonMatrixSDEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the dsmonMatrixSDTable.

            The dsmonMatrixCtlIndex value in the index identifies the
            dsmonMatrixCtlEntry on whose behalf this entry was created.

            The dsmonAggGroupIndex value in the index is determined by
            examining the DSCP value in each monitored packet, and the
            dsmonAggProfileTable entry configured for that value."
    INDEX { dsmonMatrixCtlIndex,
            dsmonMatrixTimeMark,
            dsmonAggGroupIndex,
            dsmonMatrixNLIndex,
            dsmonMatrixSourceAddress,
            dsmonMatrixDestAddress,
            dsmonMatrixALIndex
           }
    ::= { dsmonMatrixSDTable 1 }

DsmonMatrixSDEntry ::= SEQUENCE {
    dsmonMatrixTimeMark                 TimeFilter,
    dsmonMatrixNLIndex                  Integer32,
    dsmonMatrixSourceAddress            OCTET STRING,
    dsmonMatrixDestAddress              OCTET STRING,
    dsmonMatrixALIndex                  Integer32,
    dsmonMatrixSDPkts                   ZeroBasedCounter32,
    dsmonMatrixSDOvflPkts               ZeroBasedCounter32,
    dsmonMatrixSDHCPkts                 ZeroBasedCounter64,
    dsmonMatrixSDOctets                 ZeroBasedCounter32,
    dsmonMatrixSDOvflOctets             ZeroBasedCounter32,
    dsmonMatrixSDHCOctets               ZeroBasedCounter64,
    dsmonMatrixSDCreateTime             LastCreateTime
}

dsmonMatrixTimeMark OBJECT-TYPE

Top      Up      ToC       Page 79 
    SYNTAX      TimeFilter
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The Time Filter index for this table.  This object may be
            used by a management station to retrieve only rows which
            have been created or modified since a particular time.  Note
            that the current value for a row are always returned and the
            TimeFilter is not a historical data archiving mechanism.
            Refer to RFC 2021 [RFC2021] for a detailed description of
            TimeFilter operation."
    ::= { dsmonMatrixSDEntry 1 }

dsmonMatrixNLIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The protocolDirLocalIndex value of a protocolDirEntry
            representing the specific network layer protocol
            encapsulation associated with each entry, and the network
            protocol type of the dsmonMatrixSourceAddress and
            dsmonMatrixDestAddress objects."
    ::= { dsmonMatrixSDEntry 2 }

dsmonMatrixSourceAddress OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..54))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The network source address for this dsmonMatrix entry.

            This is represented as an octet string with specific
            semantics and length as identified by the dsmonMatrixNLIndex
            component of the index.

            For example, if the dsmonMatrixNLIndex indicates an
            encapsulation of IPv4, this object is encoded as a length
            octet of 4, followed by the 4 octets of the IPv4 address, in
            network byte order."
    ::= { dsmonMatrixSDEntry 3 }

dsmonMatrixDestAddress OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..54))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The network destination address for this dsmonMatrix entry.

Top      Up      ToC       Page 80 
            This is represented as an octet string with specific
            semantics and length as identified by the dsmonMatrixNLIndex
            component of the index.

            For example, if the dsmonMatrixNLIndex indicates an
            encapsulation of IPv4, this object is encoded as a length
            octet of 4, followed by the 4 octets of the IPv4 address, in
            network byte order."
    ::= { dsmonMatrixSDEntry 4 }

dsmonMatrixALIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The protocolDirLocalIndex value of the protocolDirEntry
            representing the specific application layer protocol
            associated with each entry.

            It MUST identify an protocolDirEntry which is a direct or
            indirect descendant of the protocolDirEntry identified by
            the associated dsmonMatrixNLIndex object."
    ::= { dsmonMatrixSDEntry 5 }

dsmonMatrixSDPkts OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    UNITS       "packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of packets of this protocol type (indicated by
            the associated dsmonMatrixALIndex object) without errors
            transmitted from the source address to the destination
            address since this entry was added to the
            dsmonMatrixSDTable.  Note that this is the number of link-
            layer packets, so if a single network-layer packet is
            fragmented into several link-layer frames, this counter is
            incremented several times."
    ::= { dsmonMatrixSDEntry 6 }

dsmonMatrixSDOvflPkts OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "The number of times the associated dsmonMatrixSDPkts
            counter has overflowed, since this entry was added to the
            dsmonMatrixSDTable."

Top      Up      ToC       Page 81 
    ::= { dsmonMatrixSDEntry 7 }

dsmonMatrixSDHCPkts OBJECT-TYPE
    SYNTAX      ZeroBasedCounter64
    UNITS       "packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The 64-bit version of the dsmonMatrixSDPkts object.

            Note that this object will only be instantiated if the RMON
            agent supports High Capacity monitoring for a particular
            dataSource."
    ::= { dsmonMatrixSDEntry 8 }

dsmonMatrixSDOctets OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of octets in packets of this protocol type
            transmitted from the source address to the destination
            address since this entry was added to the dsmonMatrixSDTable
            (excluding framing bits but including FCS octets), excluding
            those octets in packets that contained errors.

            Note this doesn't count just those octets in the particular
            protocol frames, but includes the entire packet that
            contained the protocol."
    ::= { dsmonMatrixSDEntry 9 }

dsmonMatrixSDOvflOctets OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "The number of times the associated dsmonMatrixSDOctets
            counter has overflowed, since this entry was added to the
            dsmonMatrixSDTable."
    ::= { dsmonMatrixSDEntry 10 }

dsmonMatrixSDHCOctets OBJECT-TYPE
    SYNTAX      ZeroBasedCounter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION

Top      Up      ToC       Page 82 
            "The 64-bit version of the dsmonMatrixSDPkts object.

            Note that this object will only be instantiated if the RMON
            agent supports High Capacity monitoring for a particular
            dataSource."
    ::= { dsmonMatrixSDEntry 11 }

dsmonMatrixSDCreateTime OBJECT-TYPE
    SYNTAX     LastCreateTime
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The value of sysUpTime when this entry was last activated.
            This can be used by the management station to ensure that
            the entry has not been deleted and recreated between polls."
    ::= { dsmonMatrixSDEntry 12 }


--
-- AL Matrix DS Statistics Table
--

dsmonMatrixDSTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DsmonMatrixDSEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of application traffic matrix entries which collect
            statistics for conversations of a particular application
            protocol between two network-level addresses.  This table is
            indexed first by the destination address and then by the
            source address to make it convenient to collect all
            statistics from a particular address.

            The probe will add to this table all pairs of addresses for
            all protocols seen in all packets with no MAC errors, and
            will increment octet and packet counts in the table for all
            packets with no MAC errors."
    ::= { dsmonMatrixObjects 3 }

dsmonMatrixDSEntry OBJECT-TYPE
    SYNTAX      DsmonMatrixDSEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the dsmonMatrixDSTable.  Note that this
            table is conceptually a re-ordered version of the
            dsmonMatrixSDTable.  Therefore, all of the index values from

Top      Up      ToC       Page 83 
            that table are used by reference, and their semantics are
            exactly as described in the dsmonMatrixSDTable.

            The dsmonMatrixCtlIndex value in the index identifies the
            dsmonMatrixCtlEntry on whose behalf this entry was created.

            The dsmonMatrixTimeMark value in the index identifies the
            Time Filter index for this table.

            The dsmonAggGroupIndex value in the index is determined by
            examining the DSCP value in each monitored packet, and the
            dsmonAggProfileTable entry configured for that value.

            The dsmonMatrixNLIndex value in the index identifies the
            protocolDirLocalIndex value of a protocolDirEntry
            representing the specific network layer protocol
            encapsulation associated with each entry, and the network
            protocol type of the dsmonMatrixSourceAddress and
            dsmonMatrixDestAddress objects.

            The dsmonMatrixDestAddress value in the index identifies the
            network destination address for this dsmonMatrix entry.

            The dsmonMatrixSourceAddress value in the index identifies
            the network source address for this dsmonMatrix entry.

            The dsmonMatrixALIndex value in the index identifies the
            protocolDirLocalIndex value of the protocolDirEntry
            representing the specific application layer protocol
            associated with each entry."
    INDEX { dsmonMatrixCtlIndex,
            dsmonMatrixTimeMark,
            dsmonAggGroupIndex,
            dsmonMatrixNLIndex,
            dsmonMatrixDestAddress,
            dsmonMatrixSourceAddress,
            dsmonMatrixALIndex
           }
    ::= { dsmonMatrixDSTable 1 }

DsmonMatrixDSEntry ::= SEQUENCE {
    dsmonMatrixDSPkts                   ZeroBasedCounter32,
    dsmonMatrixDSOvflPkts               ZeroBasedCounter32,
    dsmonMatrixDSHCPkts                 ZeroBasedCounter64,
    dsmonMatrixDSOctets                 ZeroBasedCounter32,
    dsmonMatrixDSOvflOctets             ZeroBasedCounter32,
    dsmonMatrixDSHCOctets               ZeroBasedCounter64,
    dsmonMatrixDSCreateTime             LastCreateTime

Top      Up      ToC       Page 84 
}

dsmonMatrixDSPkts OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    UNITS       "packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of packets of this protocol type (indicated by
            the associated dsmonMatrixALIndex object) without errors
            transmitted from the source address to the destination
            address since this entry was added to the
            dsmonMatrixDSTable.  Note that this is the number of link-
            layer packets, so if a single network-layer packet is
            fragmented into several link-layer frames, this counter is
            incremented several times."
    ::= { dsmonMatrixDSEntry 1 }

dsmonMatrixDSOvflPkts OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "The number of times the associated dsmonMatrixDSPkts
            counter has overflowed, since this entry was added to the
            dsmonMatrixDSTable."
    ::= { dsmonMatrixDSEntry 2 }

dsmonMatrixDSHCPkts OBJECT-TYPE
    SYNTAX      ZeroBasedCounter64
    UNITS       "packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The 64-bit version of the dsmonMatrixDSPkts object.

            Note that this object will only be instantiated if the RMON
            agent supports High Capacity monitoring for a particular
            dataSource."
    ::= { dsmonMatrixDSEntry 3 }

dsmonMatrixDSOctets OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of octets in packets of this protocol type

Top      Up      ToC       Page 85 
            transmitted from the source address to the destination
            address since this entry was added to the dsmonMatrixDSTable
            (excluding framing bits but including FCS octets), excluding
            those octets in packets that contained errors.

            Note this doesn't count just those octets in the particular
            protocol frames, but includes the entire packet that
            contained the protocol."
    ::= { dsmonMatrixDSEntry 4 }

dsmonMatrixDSOvflOctets OBJECT-TYPE
    SYNTAX      ZeroBasedCounter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "The number of times the associated dsmonMatrixDSOctets
            counter has overflowed, since this entry was added to the
            dsmonMatrixDSTable."
    ::= { dsmonMatrixDSEntry 5 }

dsmonMatrixDSHCOctets OBJECT-TYPE
    SYNTAX      ZeroBasedCounter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The 64-bit version of the dsmonMatrixDSPkts object.

            Note that this object will only be instantiated if the RMON
            agent supports High Capacity monitoring for a particular
            dataSource."
    ::= { dsmonMatrixDSEntry 6 }

dsmonMatrixDSCreateTime OBJECT-TYPE
    SYNTAX     LastCreateTime
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The value of sysUpTime when this entry was last activated.
            This can be used by the management station to ensure that
            the entry has not been deleted and recreated between polls."
    ::= { dsmonMatrixDSEntry 7 }


--
-- Per-Protocol Per-Matrix Statistics TopN Control Table
--

Top      Up      ToC       Page 86 
dsmonMatrixTopNCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DsmonMatrixTopNCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A set of parameters that control the creation of a report
            of the top N dsmonMatrix entries according to a selected
            metric.

            Note that an agent MAY choose to limit the actual number of
            entries which may be created in this table.  In this case,
            the agent SHOULD return an error-status of
            'resourceUnavailable(13)', as per section 4.2.5 of the
            'Protocol Operations for SNMPv2' specification [RFC1905]."
    ::= { dsmonMatrixObjects 4 }

dsmonMatrixTopNCtlEntry OBJECT-TYPE
    SYNTAX      DsmonMatrixTopNCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the dsmonMatrixTopNCtlTable.

            Entries are created and deleted from this table by
            management action only, using the dsmonMatrixTopNCtlStatus
            RowStatus object.

            The agent SHOULD support non-volatile configuration of this
            table, and upon system initialization, the table SHOULD be
            initialized with the saved values.

            Activation of a control row in this table will cause an
            associated dsmonMatrixTopNTable to be created and maintained
            by the agent."
    INDEX { dsmonMatrixTopNCtlIndex }
    ::= { dsmonMatrixTopNCtlTable 1 }

DsmonMatrixTopNCtlEntry ::= SEQUENCE {
    dsmonMatrixTopNCtlIndex            Integer32,
    dsmonMatrixTopNCtlMatrixIndex      Integer32,
    dsmonMatrixTopNCtlRateBase         INTEGER,
    dsmonMatrixTopNCtlTimeRemaining    Integer32,
    dsmonMatrixTopNCtlGeneratedRpts    Counter32,
    dsmonMatrixTopNCtlDuration         Integer32,
    dsmonMatrixTopNCtlRequestedSize    Integer32,
    dsmonMatrixTopNCtlGrantedSize      Integer32,
    dsmonMatrixTopNCtlStartTime        TimeStamp,
    dsmonMatrixTopNCtlOwner            OwnerString,

Top      Up      ToC       Page 87 
    dsmonMatrixTopNCtlStatus           RowStatus
}

dsmonMatrixTopNCtlIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An index that uniquely identifies an entry in the
            dsmonMatrixTopNCtlTable.  Each such entry defines one Top N
            report prepared for one RMON dataSource."
    ::= { dsmonMatrixTopNCtlEntry 1 }

dsmonMatrixTopNCtlMatrixIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The dsmonMatrixSDTable for which a top N report will be
            prepared on behalf of this entry.  The dsmonMatrixSDTable is
            identified by the same value of the dsmonMatrixCtlIndex
            object.

            This object MUST NOT be modified if the associated
            dsmonMatrixTopNCtlStatus object is equal to active(1)."
    ::= { dsmonMatrixTopNCtlEntry 2 }

dsmonMatrixTopNCtlRateBase OBJECT-TYPE
    SYNTAX     INTEGER {
                  dsmonMatrixTopNPkts(1),
                  dsmonMatrixTopNOctets(2),
                  dsmonMatrixTopNHCPkts(3),
                  dsmonMatrixTopNHCOctets(4)
               }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The variable for each dsmonMatrixSD entry that the
            dsmonMatrixTopNRate and dsmonMatrixTopNHCRate variables are
            based upon.  Each dsmonMatrixTopN report generated on behalf
            of this control entry will be ranked in descending order,
            based on the associated dsmonMatrixSDTable counter,
            identified by this object.

            The following table identifies the dsmonMatrixSDTable
            counters associated with each enumeration:

            Enumeration                 RateBase MIB Objects

Top      Up      ToC       Page 88 
            -----------                 --------------------
            dsmonMatrixTopNPkts         dsmonMatrixSDPkts
            dsmonMatrixTopNOctets       dsmonMatrixSDOctets
            dsmonMatrixTopNHCPkts       dsmonMatrixSDHCPkts
            dsmonMatrixTopNHCOctets     dsmonMatrixSDHCOctets

            The following enumerations are only available if the agent
            supports High Capacity monitoring:

            dsmonMatrixTopNHCPkts
            dsmonMatrixTopNHCOctets

            This object MUST NOT be modified if the associated
            dsmonMatrixTopNCtlStatus object is equal to active(1)."
    ::= { dsmonMatrixTopNCtlEntry 3 }

dsmonMatrixTopNCtlTimeRemaining OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    UNITS      "seconds"
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The number of seconds left in the report currently being
            collected.  When this object is modified by the management
            station, a new collection is started, possibly aborting a
            currently running report.  The new value is used as the
            requested duration of this report, and is immediately loaded
            into the associated dsmonMatrixTopNCtlDuration object.

            When the report finishes, the probe will automatically start
            another collection with the same initial value of
            dsmonMatrixTopNCtlTimeRemaining.  Thus the management
            station may simply read the resulting reports repeatedly,
            checking the startTime and duration each time to ensure that
            a report was not missed or that the report parameters were
            not changed.

            While the value of this object is non-zero, it decrements by
            one per second until it reaches zero.  At the time that this
            object decrements to zero, the report is made accessible in
            the dsmonMatrixTopNTable, overwriting any report that may be
            there.

            When this object is modified by the management station, any
            associated entries in the dsmonMatrixTopNTable shall be
            deleted."
    DEFVAL { 1800 }
    ::= { dsmonMatrixTopNCtlEntry 4 }

Top      Up      ToC       Page 89 
dsmonMatrixTopNCtlGeneratedRpts OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "reports"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of reports that have been generated by this
            entry."
    ::= { dsmonMatrixTopNCtlEntry 5 }

dsmonMatrixTopNCtlDuration OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of seconds that this report has collected during
            the last sampling interval.

            When the associated dsmonMatrixTopNCtlTimeRemaining object
            is set, this object shall be set by the probe to the same
            value and shall not be modified until the next time the
            dsmonMatrixTopNCtlTimeRemaining is set.

            This value shall be zero if no reports have been requested
            for this dsmonMatrixTopNCtlEntry."
    ::= { dsmonMatrixTopNCtlEntry 6 }

dsmonMatrixTopNCtlRequestedSize OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    UNITS      "table entries"
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The maximum number of dsmonMatrix entries requested for
            this report.

            When this object is created or modified, the probe SHOULD
            set dsmonMatrixTopNCtlGrantedSize as closely to this object
            as is possible for the particular probe implementation and
            available resources."
    DEFVAL { 150 }
    ::= { dsmonMatrixTopNCtlEntry 7 }

dsmonMatrixTopNCtlGrantedSize OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    UNITS      "table entries"
    MAX-ACCESS read-only

Top      Up      ToC       Page 90 
    STATUS     current
    DESCRIPTION
            "The maximum number of dsmonMatrix entries in this report.

            When the associated dsmonMatrixTopNCtlRequestedSize object
            is created or modified, the probe SHOULD set this object as
            closely to the requested value as is possible for the
            particular implementation and available resources.  The
            probe MUST NOT lower this value except as a result of a
            set to the associated dsmonMatrixTopNCtlRequestedSize
            object.

            Protocol entries with the highest value of
            dsmonMatrixTopNRate or dsmonMatrixTopNHCRate (depending on
            the value of the associated dsmonMatrixTopNCtlRateBase
            object) shall be placed in this table in decreasing order of
            this rate until there is no more room or until there are no
            more dsmonMatrix entries."
    ::= { dsmonMatrixTopNCtlEntry 8 }

dsmonMatrixTopNCtlStartTime OBJECT-TYPE
    SYNTAX     TimeStamp
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The value of sysUpTime when this top N report was last
            started.  In other words, this is the time that the
            associated dsmonMatrixTopNCtlTimeRemaining object was
            modified to start the requested report or the time the
            report was last automatically (re)started.

            This object may be used by the management station to
            determine if a report was missed or not."
    ::= { dsmonMatrixTopNCtlEntry 9 }

dsmonMatrixTopNCtlOwner OBJECT-TYPE
    SYNTAX     OwnerString
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The entity that configured this entry and is therefore
            using the resources assigned to it."
    ::= { dsmonMatrixTopNCtlEntry 10 }

dsmonMatrixTopNCtlStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current

Top      Up      ToC       Page 91 
    DESCRIPTION
            "The status of this dsmonMatrixTopNCtlEntry.

            An entry MUST NOT exist in the active state unless all
            objects in the entry have an appropriate value.

            If this object is not equal to active(1), all associated
            entries in the dsmonMatrixTopNTable shall be deleted by the
            agent."
    ::= { dsmonMatrixTopNCtlEntry 11 }

--
-- dsmonMatrix TopN Table
--

dsmonMatrixTopNTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF DsmonMatrixTopNEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A set of statistics for those dsmonMatrix entries that have
            counted the highest number of octets or packets.

            If the dsmonAggControlLocked object is equal to 'false',
            then all entries in this table SHALL be deleted, and the
            agent will not process TopN reports on behalf of any
            dsmonMatrixTopNCtlEntry.

            When the dsmonAggControlLocked object is set to 'true', then
            particular reports SHOULD be restarted from the beginning,
            on behalf of all active rows in the dsmonMatrixTopNCtlTable.

            Note that dsmonMatrix entries which did not increment at all
            during the report interval SHOULD NOT be included in
            dsmonMatrixTopN reports."
    ::= { dsmonMatrixObjects 5 }

dsmonMatrixTopNEntry OBJECT-TYPE
    SYNTAX     DsmonMatrixTopNEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A conceptual row in the dsmonMatrixTopNTable.

            The dsmonMatrixTopNCtlIndex value in the index identifies
            the dsmonMatrixTopNCtlEntry on whose behalf this entry was
            created.

Top      Up      ToC       Page 92 
            Entries in this table are ordered from 1 to 'N', where lower
            numbers represent higher values of the rate base object,
            over the report interval."
    INDEX { dsmonMatrixTopNCtlIndex, dsmonMatrixTopNIndex }
    ::= { dsmonMatrixTopNTable 1 }

DsmonMatrixTopNEntry ::= SEQUENCE {
    dsmonMatrixTopNIndex                Integer32,
    dsmonMatrixTopNAggGroup             DsmonCounterAggGroupIndex,
    dsmonMatrixTopNNLIndex              Integer32,
    dsmonMatrixTopNSourceAddress        OCTET STRING,
    dsmonMatrixTopNDestAddress          OCTET STRING,
    dsmonMatrixTopNALIndex              Integer32,
    dsmonMatrixTopNPktRate              Gauge32,
    dsmonMatrixTopNPktRateOvfl          Gauge32,
    dsmonMatrixTopNHCPktRate            CounterBasedGauge64,
    dsmonMatrixTopNRevPktRate           Gauge32,
    dsmonMatrixTopNRevPktRateOvfl       Gauge32,
    dsmonMatrixTopNHCRevPktRate         CounterBasedGauge64,
    dsmonMatrixTopNOctetRate            Gauge32,
    dsmonMatrixTopNOctetRateOvfl        Gauge32,
    dsmonMatrixTopNHCOctetRate          CounterBasedGauge64,
    dsmonMatrixTopNRevOctetRate         Gauge32,
    dsmonMatrixTopNRevOctetRateOvfl     Gauge32,
    dsmonMatrixTopNHCRevOctetRate       CounterBasedGauge64
  }

dsmonMatrixTopNIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An index that uniquely identifies an entry in the
            dsmonMatrixTopNTable among those in the same report.  This
            index is between 1 and N, where N is the number of entries
            in this report."
    ::= { dsmonMatrixTopNEntry 1 }

dsmonMatrixTopNAggGroup OBJECT-TYPE
    SYNTAX      DsmonCounterAggGroupIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The counter aggregation group index value associated with
            host identified in this entry.  This object identifies the
            dsmonAggGroupEntry with the same dsmonAggControlIndex value
            as the associated dsmonMatrixCtlAggProfile object and the
            same dsmonAggGroupIndex value as this object."

Top      Up      ToC       Page 93 
    ::= { dsmonMatrixTopNEntry 2 }

dsmonMatrixTopNNLIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The protocolDirLocalIndex value which identifies the
            protocol associated with the dsmonMatrixTopNSourceAddress
            and dsmonMatrixTopNDestAddress objects in this entry.

            If the protocolDirEntry associated with the
            protocolDirLocalIndex with the same value as this object is
            de-activated or deleted, then the agent MUST delete this
            dsmonMatrixTopN entry."
    ::= { dsmonMatrixTopNEntry 3 }

dsmonMatrixTopNSourceAddress OBJECT-TYPE
    SYNTAX     OCTET STRING
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The dsmonMatrixSDSourceAddress value for the source network
            host identified in this entry.  The associated
            dsmonMatrixTopNNLIndex object identifies the network
            protocol type and the encoding rules for this object."
    ::= { dsmonMatrixTopNEntry 4 }

dsmonMatrixTopNDestAddress OBJECT-TYPE
    SYNTAX     OCTET STRING
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The dsmonMatrixSDDestAddress value for the destination
            network host identified in this entry.  The associated
            dsmonMatrixTopNNLIndex object identifies the network
            protocol type and the encoding rules for this object."
    ::= { dsmonMatrixTopNEntry 5 }

dsmonMatrixTopNALIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The protocolDirLocalIndex value which identifies the
            application protocol associated with this entry.

            If the protocolDirEntry associated with the

Top      Up      ToC       Page 94 
            protocolDirLocalIndex with the same value as this object is
            de-activated or deleted, then the agent MUST delete this
            dsmonMatrixTopN entry."
    ::= { dsmonMatrixTopNEntry 6 }

dsmonMatrixTopNPktRate OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of packets seen of this protocol from the source
            host to the destination host during this sampling interval,
            counted using the rules for counting the dsmonMatrixSDPkts
            object.

            If the value of dsmonMatrixTopNCtlRateBase is
            dsmonMatrixTopNPkts, this variable will be used to sort this
            report.

            If the value of the dsmonMatrixTopNCtlRateBase is
            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
            object will contain the the least significant 32 bits of the
            associated dsmonMatrixTopNHCPktRate object."
    ::= { dsmonMatrixTopNEntry 7 }

dsmonMatrixTopNPktRateOvfl OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     deprecated
    DESCRIPTION
            "The most significant 32 bits of the associated
            dsmonMatrixTopNHCPktRate object.

            If the associated dsmonMatrixTopNCtlRateBase is equal to
            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
            object will contain the most significant 32 bits of the
            associated dsmonMatrixTopNHCPktRate object, otherwise this
            object will contain the value zero.

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 8 }

dsmonMatrixTopNHCPktRate OBJECT-TYPE
    SYNTAX     CounterBasedGauge64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION

Top      Up      ToC       Page 95 
            "The number of packets seen of this protocol from the source
            host to the destination host during this sampling interval,
            counted using the rules for counting the dsmonMatrixSDHCPkts
            object.

            If the value of dsmonMatrixTopNCtlRateBase is
            dsmonMatrixTopNHCPkts, this variable will be used to sort
            this report.

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 9 }

dsmonMatrixTopNRevPktRate OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of packets seen of this protocol from the
            destination host to the source host during this sampling
            interval, counted using the rules for counting the
            dsmonMatrixDSPkts object  (note that the corresponding
            dsmonMatrixSDPkts object selected is the one whose source
            address is equal to dsmonMatrixTopNDestAddress and whose
            destination address is equal to
            dsmonMatrixTopNSourceAddress.)"
    ::= { dsmonMatrixTopNEntry 10 }

dsmonMatrixTopNRevPktRateOvfl OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     deprecated
    DESCRIPTION
            "The most significant 32 bits of the associated
            dsmonMatrixTopNHCRevPktRate object.

            If the associated dsmonMatrixTopNCtlRateBase is equal to
            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOCtets, then this
            object will contain the most significant 32 bits of the
            associated dsmonMatrixTopNHCRevPktRate object, otherwise
            this object will contain the value zero.

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 11 }

dsmonMatrixTopNHCRevPktRate OBJECT-TYPE
    SYNTAX     CounterBasedGauge64

Top      Up      ToC       Page 96 
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of packets seen of this protocol from the
            destination host to the source host during this sampling
            interval, counted using the rules for counting the
            dsmonMatrixDSHCPkts object  (note that the corresponding
            dsmonMatrixSDHCPkts object selected is the one whose source
            address is equal to dsmonMatrixTopNDestAddress and whose
            destination address is equal to
            dsmonMatrixTopNSourceAddress.)

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 12 }

dsmonMatrixTopNOctetRate OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of octets seen of this protocol from the source
            host to the destination host during this sampling interval,
            counted using the rules for counting the dsmonMatrixSDOctets
            object.

            If the value of dsmonMatrixTopNCtlRateBase is
            dsmonMatrixTopNOctets, this variable will be used to sort
            this report.

            If the value of the dsmonMatrixTopNCtlRateBase is
            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
            object will contain the the least significant 32 bits of the
            associated dsmonMatrixTopNHCPktRate object."
    ::= { dsmonMatrixTopNEntry 13 }

dsmonMatrixTopNOctetRateOvfl OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     deprecated
    DESCRIPTION
            "The most significant 32 bits of the associated
            dsmonMatrixTopNHCOctetRate object.

            If the associated dsmonMatrixTopNCtlRateBase is equal to
            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
            object will contain the most significant 32 bits of the
            associated dsmonMatrixTopNHCOctetRate object, otherwise this

Top      Up      ToC       Page 97 
            object will contain the value zero.

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 14 }

dsmonMatrixTopNHCOctetRate OBJECT-TYPE
    SYNTAX     CounterBasedGauge64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of octets seen of this protocol from the source
            host to the destination host during this sampling interval,
            counted using the rules for counting the
            dsmonMatrixSDHCOctets object.

            If the value of dsmonMatrixTopNCtlRateBase is
            dsmonMatrixTopNHCOctets, this variable will be used to sort
            this report.

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 15 }

dsmonMatrixTopNRevOctetRate OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of octets seen of this protocol from the
            destination host to the source host during this sampling
            interval, counted using the rules for counting the
            dsmonMatrixDSOctets object  (note that the corresponding
            dsmonMatrixSDOctets object selected is the one whose source
            address is equal to dsmonMatrixTopNDestAddress and whose
            destination address is equal to
            dsmonMatrixTopNSourceAddress.)"
    ::= { dsmonMatrixTopNEntry 16 }

dsmonMatrixTopNRevOctetRateOvfl OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     deprecated
    DESCRIPTION
            "The most significant 32 bits of the associated
            dsmonMatrixTopNHCRevOctetRate object.

            If the associated dsmonMatrixTopNCtlRateBase is equal to

Top      Up      ToC       Page 98 
            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOCtets, then this
            object will contain the most significant 32 bits of the
            associated dsmonMatrixTopNHCRevPktRate object, otherwise
            this object will contain the value zero.

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 17 }

dsmonMatrixTopNHCRevOctetRate OBJECT-TYPE
    SYNTAX     CounterBasedGauge64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of octets seen of this protocol from the
            destination host to the source host during this sampling
            interval, counted using the rules for counting the
            dsmonMatrixDSHCOctets object  (note that the corresponding
            dsmonMatrixSDHCOctets object selected is the one whose
            source address is equal to dsmonMatrixTopNDestAddress and
            whose destination address is equal to
            dsmonMatrixTopNSourceAddress.)

            The agent MAY choose not to instantiate this object if High
            Capacity monitoring is not supported."
    ::= { dsmonMatrixTopNEntry 18 }

--
-- Conformance Section
--

dsmonCompliances OBJECT IDENTIFIER ::= { dsmonConformance 1 }
dsmonGroups      OBJECT IDENTIFIER ::= { dsmonConformance 2 }

--
-- Compliance for agents that do not support HC or Counter64
--

dsmonCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for conformance to the
            Differentiated Services Monitoring MIB."
    MODULE  -- this module
        MANDATORY-GROUPS {
                           dsmonCounterAggControlGroup,
                           dsmonStatsGroup,
                           dsmonCapsGroup

Top      Up      ToC       Page 99 
                         }

        GROUP   dsmonStatsHCGroup
        DESCRIPTION
            "The dsmonStatsHCGroup is mandatory for systems which
            implement High Capacity monitoring."

        GROUP   dsmonPdistGroup
        DESCRIPTION
            "The dsmonPdistGroup is mandatory for systems which
            implement RMON-2 protocolDirTable based protocol
            distribution monitoring."

        GROUP  dsmonPdistHCGroup
        DESCRIPTION
            "The dsmonPdistHCGroup is mandatory for systems which
            implement RMON-2 protocolDirTable based protocol
            distribution monitoring on high capacity interfaces."

        GROUP  dsmonHostGroup
        DESCRIPTION
            "The dsmonHostGroup is mandatory for systems which implement
            RMON-2 nlHostTable based network protocol monitoring."

        GROUP  dsmonHostHCGroup
        DESCRIPTION
            "The dsmonHostHCGroup is mandatory for systems which
            implement RMON-2 nlHostTable based network protocol
            monitoring, on high capacity interfaces."

        GROUP  dsmonMatrixGroup
        DESCRIPTION
            "The dsmonMatrixGroup is mandatory for systems which
            implement RMON-2 alMatrix based application protocol
            monitoring."

        GROUP  dsmonMatrixHCGroup
        DESCRIPTION
            "The dsmonMatrixHCGroup is mandatory for systems which
            implement RMON-2 alMatrix based application protocol
            monitoring, on high capacity interfaces."

    ::= { dsmonCompliances 1 }

--
-- Compliance for agents that support HC and Counter64
--

Top      Up      ToC       Page 100 
dsmonHCCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for conformance to the
            Differentiated Services Monitoring MIB for agents which also
            support High Capacity monitoring and the Counter64 data
            type."
    MODULE  -- this module
        MANDATORY-GROUPS {
                           dsmonCounterAggControlGroup,
                           dsmonStatsGroup,
                           dsmonStatsHCGroup,
                           dsmonCapsGroup
                         }

        GROUP   dsmonPdistGroup
        DESCRIPTION
            "The dsmonPdistGroup is mandatory for systems which
            implement RMON-2 protocolDirTable based protocol
            distribution monitoring."

        GROUP  dsmonPdistHCGroup
        DESCRIPTION
            "The dsmonPdistHCGroup is mandatory for systems which
            implement RMON-2 protocolDirTable based protocol
            distribution monitoring."

        GROUP  dsmonHostGroup
        DESCRIPTION
            "The dsmonHostGroup is mandatory for systems which implement
            RMON-2 nlHostTable based network protocol monitoring."

        GROUP  dsmonHostHCGroup
        DESCRIPTION
            "The dsmonHostHCGroup is mandatory for systems which
            implement RMON-2 nlHostTable based network protocol
            monitoring."

        GROUP  dsmonMatrixGroup
        DESCRIPTION
            "The dsmonMatrixGroup is mandatory for systems which
            implement RMON-2 alMatrix based application protocol
            monitoring."

        GROUP  dsmonMatrixHCGroup
        DESCRIPTION
            "The dsmonMatrixHCGroup is mandatory for systems which
            implement RMON-2 alMatrix based application protocol

Top      Up      ToC       Page 101 
            monitoring."

    ::= { dsmonCompliances 2 }

--
-- Compliance for agents that support HC, but not Counter64
--

dsmonHCNoC64Compliance MODULE-COMPLIANCE
    STATUS  deprecated
    DESCRIPTION
            "Describes the requirements for conformance to the
            Differentiated Services Monitoring MIB for an agent which
            supports high capacity monitoring, but does not support the
            Counter64 data type (e.g., only supports the SNMPv1
            protocol)."
    MODULE  -- this module
        MANDATORY-GROUPS {
                           dsmonCounterAggControlGroup,
                           dsmonStatsGroup,
                           dsmonStatsOvflGroup,
                           dsmonCapsGroup
                         }

        GROUP   dsmonStatsHCGroup
        DESCRIPTION
            "Implementation of the dsmonStatsHCGroup is not required.
            High Capacity monitoring."

        GROUP   dsmonPdistGroup
        DESCRIPTION
            "The dsmonPdistGroup is mandatory for systems which
            implement RMON-2 protocolDirTable based protocol
            distribution monitoring."

        GROUP   dsmonPdistOvflGroup
        DESCRIPTION
            "The dsmonPdistGroup is mandatory for systems which
            implement RMON-2 protocolDirTable based protocol
            distribution monitoring."

        GROUP  dsmonPdistHCGroup
        DESCRIPTION
            "Implementation of the dsmonPdistHCGroup is not required."

        GROUP  dsmonHostGroup
        DESCRIPTION
            "The dsmonHostGroup is mandatory for systems which implement

Top      Up      ToC       Page 102 
            RMON-2 nlHostTable based network protocol monitoring."

        GROUP  dsmonHostOvflGroup
        DESCRIPTION
            "The dsmonHostGroup is mandatory for systems which implement
            RMON-2 nlHostTable based network protocol monitoring."

        GROUP  dsmonHostHCGroup
        DESCRIPTION
            "Implementation of the dsmonHostHCGroup is not required."

        GROUP  dsmonMatrixGroup
        DESCRIPTION
            "The dsmonMatrixGroup is mandatory for systems which
            implement RMON-2 alMatrix based application protocol
            monitoring."

        GROUP  dsmonMatrixOvflGroup
        DESCRIPTION
            "The dsmonMatrixGroup is mandatory for systems which
            implement RMON-2 alMatrix based application protocol
            monitoring."

        GROUP  dsmonMatrixHCGroup
        DESCRIPTION
            "Implementation of the dsmonMatrixHCGroup is not required."

    ::= { dsmonCompliances 3 }



-- Object Groups

dsmonCounterAggControlGroup OBJECT-GROUP
    OBJECTS {
             dsmonMaxAggGroups,
             dsmonAggControlLocked,
             dsmonAggControlChanges,
             dsmonAggControlLastChangeTime,
             dsmonAggControlDescr,
             dsmonAggControlOwner,
             dsmonAggControlStatus,
             dsmonAggGroupIndex,
             dsmonAggGroupDescr,
             dsmonAggGroupStatus
    }
    STATUS  current
    DESCRIPTION

Top      Up      ToC       Page 103 
            "A collection of objects used to configure and manage
            counter aggregation groups for DSMON collection purposes."
    ::= { dsmonGroups 1 }

dsmonStatsGroup OBJECT-GROUP
    OBJECTS {
             dsmonStatsControlDataSource,
             dsmonStatsControlAggProfile,
             dsmonStatsControlDroppedFrames,
             dsmonStatsControlCreateTime,
             dsmonStatsControlOwner,
             dsmonStatsControlStatus,
             dsmonStatsInPkts,
             dsmonStatsInOctets,
             dsmonStatsOutPkts,
             dsmonStatsOutOctets
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per DSCP statistics."
    ::= { dsmonGroups 2 }

dsmonStatsOvflGroup OBJECT-GROUP
    OBJECTS {
            dsmonStatsInOvflPkts,
            dsmonStatsInOvflOctets,
            dsmonStatsOutOvflPkts,
            dsmonStatsOutOvflOctets
    }
    STATUS  deprecated
    DESCRIPTION
            "A collection of objects providing per-DSCP overflow
            counters for systems with high capacity data sources, but
            without support for the Counter64 data type."
    ::= { dsmonGroups 3 }

dsmonStatsHCGroup OBJECT-GROUP
    OBJECTS {
            dsmonStatsInHCPkts,
            dsmonStatsInHCOctets,
            dsmonStatsOutHCPkts,
            dsmonStatsOutHCOctets
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per DSCP statistics for
            high capacity data sources."
    ::= { dsmonGroups 4 }

Top      Up      ToC       Page 104 
dsmonPdistGroup OBJECT-GROUP
    OBJECTS {
            dsmonPdistCtlDataSource,
            dsmonPdistCtlAggProfile,
            dsmonPdistCtlMaxDesiredEntries,
            dsmonPdistCtlDroppedFrames,
            dsmonPdistCtlInserts,
            dsmonPdistCtlDeletes,
            dsmonPdistCtlCreateTime,
            dsmonPdistCtlOwner,
            dsmonPdistCtlStatus,
            dsmonPdistStatsPkts,
            dsmonPdistStatsOctets,
            dsmonPdistStatsCreateTime,
            dsmonPdistTopNCtlPdistIndex,
            dsmonPdistTopNCtlRateBase,
            dsmonPdistTopNCtlTimeRemaining,
            dsmonPdistTopNCtlGeneratedReprts,
            dsmonPdistTopNCtlDuration,
            dsmonPdistTopNCtlRequestedSize,
            dsmonPdistTopNCtlGrantedSize,
            dsmonPdistTopNCtlStartTime,
            dsmonPdistTopNCtlOwner,
            dsmonPdistTopNCtlStatus,
            dsmonPdistTopNPDLocalIndex,
            dsmonPdistTopNAggGroup,
            dsmonPdistTopNRate
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per protocol DSCP
            monitoring extensions to the RMON-2 MIB."
    ::= { dsmonGroups 5 }

dsmonPdistOvflGroup OBJECT-GROUP
    OBJECTS {
            dsmonPdistStatsOvflPkts,
            dsmonPdistStatsOvflOctets,
            dsmonPdistTopNRateOvfl
    }
    STATUS  deprecated
    DESCRIPTION
            "A collection of objects providing per-protocol DSCP
            overflow counters for systems with high capacity data
            sources, but without support for the Counter64 data type."
    ::= { dsmonGroups 6 }

dsmonPdistHCGroup OBJECT-GROUP

Top      Up      ToC       Page 105 
    OBJECTS {
            dsmonPdistStatsHCPkts,
            dsmonPdistStatsHCOctets,
            dsmonPdistTopNHCRate
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per protocol DSCP
            monitoring extensions to the RMON-2 MIB for High Capacity
            networks."
    ::= { dsmonGroups 7 }

dsmonHostGroup OBJECT-GROUP
    OBJECTS {
            dsmonHostCtlDataSource,
            dsmonHostCtlAggProfile,
            dsmonHostCtlMaxDesiredEntries,
            dsmonHostCtlIPv4PrefixLen,
            dsmonHostCtlIPv6PrefixLen,
            dsmonHostCtlDroppedFrames,
            dsmonHostCtlInserts,
            dsmonHostCtlDeletes,
            dsmonHostCtlCreateTime,
            dsmonHostCtlOwner,
            dsmonHostCtlStatus,
            dsmonHostInPkts,
            dsmonHostInOctets,
            dsmonHostOutPkts,
            dsmonHostOutOctets,
            dsmonHostCreateTime,
            dsmonHostTopNCtlHostIndex,
            dsmonHostTopNCtlRateBase,
            dsmonHostTopNCtlTimeRemaining,
            dsmonHostTopNCtlGeneratedReports,
            dsmonHostTopNCtlDuration,
            dsmonHostTopNCtlRequestedSize,
            dsmonHostTopNCtlGrantedSize,
            dsmonHostTopNCtlStartTime,
            dsmonHostTopNCtlOwner,
            dsmonHostTopNCtlStatus,
            dsmonHostTopNPDLocalIndex,
            dsmonHostTopNAddress,
            dsmonHostTopNAggGroup,
            dsmonHostTopNRate
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per Host monitoring

Top      Up      ToC       Page 106 
            functions."
    ::= { dsmonGroups 8 }

dsmonHostOvflGroup OBJECT-GROUP
    OBJECTS {
            dsmonHostInOvflPkts,
            dsmonHostInOvflOctets,
            dsmonHostOutOvflPkts,
            dsmonHostOutOvflOctets,
            dsmonHostTopNRateOvfl
    }
    STATUS  deprecated
    DESCRIPTION
            "A collection of objects providing per host DSCP overflow
            counters for systems with high capacity data sources, but
            without support for the Counter64 data type."
    ::= { dsmonGroups 9 }

dsmonHostHCGroup OBJECT-GROUP
    OBJECTS {
            dsmonHostInHCPkts,
            dsmonHostInHCOctets,
            dsmonHostOutHCPkts,
            dsmonHostOutHCOctets,
            dsmonHostTopNHCRate
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per Host monitoring
            functions for High Capacity networks."
    ::= { dsmonGroups 10 }

dsmonCapsGroup OBJECT-GROUP
    OBJECTS {
            dsmonCapabilities
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing an indication of the
            DSMON monitoring functions supported by the agent."
    ::= { dsmonGroups 11 }

dsmonMatrixGroup OBJECT-GROUP
    OBJECTS {
            dsmonMatrixCtlDataSource,
            dsmonMatrixCtlAggProfile,
            dsmonMatrixCtlMaxDesiredEntries,
            dsmonMatrixCtlDroppedFrames,

Top      Up      ToC       Page 107 
            dsmonMatrixCtlInserts,
            dsmonMatrixCtlDeletes,
            dsmonMatrixCtlCreateTime,
            dsmonMatrixCtlOwner,
            dsmonMatrixCtlStatus,
            dsmonMatrixSDPkts,
            dsmonMatrixSDOctets,
            dsmonMatrixSDCreateTime,
            dsmonMatrixDSPkts,
            dsmonMatrixDSOctets,
            dsmonMatrixDSCreateTime,
            dsmonMatrixTopNCtlMatrixIndex,
            dsmonMatrixTopNCtlRateBase,
            dsmonMatrixTopNCtlTimeRemaining,
            dsmonMatrixTopNCtlGeneratedRpts,
            dsmonMatrixTopNCtlDuration,
            dsmonMatrixTopNCtlRequestedSize,
            dsmonMatrixTopNCtlGrantedSize,
            dsmonMatrixTopNCtlStartTime,
            dsmonMatrixTopNCtlOwner,
            dsmonMatrixTopNCtlStatus,
            dsmonMatrixTopNAggGroup,
            dsmonMatrixTopNNLIndex,
            dsmonMatrixTopNSourceAddress,
            dsmonMatrixTopNDestAddress,
            dsmonMatrixTopNALIndex,
            dsmonMatrixTopNPktRate,
            dsmonMatrixTopNRevPktRate,
            dsmonMatrixTopNOctetRate,
            dsmonMatrixTopNRevOctetRate
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per conversation
            monitoring functions."
    ::= { dsmonGroups 12 }

dsmonMatrixOvflGroup OBJECT-GROUP
    OBJECTS {
            dsmonMatrixSDOvflPkts,
            dsmonMatrixSDOvflOctets,
            dsmonMatrixDSOvflPkts,
            dsmonMatrixDSOvflOctets,
            dsmonMatrixTopNPktRateOvfl,
            dsmonMatrixTopNRevPktRateOvfl,
            dsmonMatrixTopNOctetRateOvfl,
            dsmonMatrixTopNRevOctetRateOvfl
    }

Top      Up      ToC       Page 108 
    STATUS  deprecated
    DESCRIPTION
            "A collection of objects providing per conversation
            monitoring functions for systems with high capacity data
            sources, but without support for the Counter64 data type."
    ::= { dsmonGroups 13 }

dsmonMatrixHCGroup OBJECT-GROUP
    OBJECTS {
            dsmonMatrixSDHCPkts,
            dsmonMatrixSDHCOctets,
            dsmonMatrixDSHCPkts,
            dsmonMatrixDSHCOctets,
            dsmonMatrixTopNHCPktRate,
            dsmonMatrixTopNHCRevPktRate,
            dsmonMatrixTopNHCOctetRate,
            dsmonMatrixTopNHCRevOctetRate
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing per conversation
            monitoring functions for High Capacity networks."
    ::= { dsmonGroups 14 }

END



(page 108 continued on part 5)

Next RFC Part