tech-invite   World Map     

IETF     RFCs     Groups     SIP     ABNFs    |    3GPP     Specs     Glossaries     Architecture     IMS     UICC    |    search

RFC 2564

 
 
 

Application Management MIB

Part 3 of 4, p. 43 to 67
Prev RFC Part       Next RFC Part

 


prevText      Top      Up      ToC       Page 43 
   applTransactFlowBytesLow OBJECT-TYPE
           SYNTAX           Counter32
           UNITS            "bytes"
           MAX-ACCESS       read-only
           STATUS           current
           DESCRIPTION
              "This attribute corresponds to the low thirty-two
               bits of applTransactFlowBytes.

               Discontinuities in this counter can be detected
               by monitoring the corresponding instance of
               applOpenChannelOpenTime."
           ::= { applTransactFlowEntry 6 }

   applTransactFlowTime OBJECT-TYPE
           SYNTAX       DateAndTime
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "The applTransactFlowTime attribute records the time of
               the processing (receipt or transmission as indicated
               by the applTransactFlowDirection index) by this
               running application element or service instance of
               the most recent request/response (as indicated by
               the applTransactFlowReqRsp index) on this transaction
               stream.

               If no requests/responses been received/transmitted by
               this entity over this transaction stream, the value
               of this attribute shall be '0000000000000000'H "
           DEFVAL { '0000000000000000'H }
           ::= { applTransactFlowEntry 7 }

   -- ****************************************************************
   --
   --      applTransactKindTable - transaction statistics broken down
   --      according to the kinds of transactions in each direction
   --      for a transaction stream.
   --
   -- ****************************************************************

   applTransactKindTable   OBJECT-TYPE
           SYNTAX SEQUENCE OF ApplTransactKindEntry
           MAX-ACCESS      not-accessible
           STATUS          current

Top      Up      ToC       Page 44 
           DESCRIPTION
              "The applTransactKindTable provides transaction statistics
               broken down by kinds of transaction.  The definition of
               the kinds of transactions is specific to the application
               protocol in use, and may be documented in the form of an
               applicability statement.  "
           ::= { applChannelGroup 6 }

   applTransactKindEntry OBJECT-TYPE
           SYNTAX        ApplTransactKindEntry
           MAX-ACCESS    not-accessible
           STATUS        current
           DESCRIPTION
              "An applTransactKindEntry reports information for a
               specific service instance or running application
               element's use of a specific transaction stream in
               a particular direction in requests or responses
               (as indicated by the applTransactFlowReqRsp index)
               broken down by transaction kind, as indicated by the
               applTransactKind index.

               Discontinuities in any of the counters in an entry can
               be detected by monitoring the corresponding instance of
               applOpenChannelOpenTime."

           INDEX           { applElmtOrSvc,
                             applElmtOrSvcId,
                             applOpenChannelIndex,
                             applTransactFlowDirection,
                             applTransactFlowReqRsp,
                             applTransactKind }
           ::= { applTransactKindTable 1 }

   ApplTransactKindEntry ::= SEQUENCE
           {
                   applTransactKind                SnmpAdminString,
                   applTransactKindTrans           Counter64,
                   applTransactKindTransLow        Counter32,
                   applTransactKindBytes           Counter64,
                   applTransactKindBytesLow        Counter32,
                   applTransactKindTime            DateAndTime
           }

   applTransactKind   OBJECT-TYPE
           SYNTAX     SnmpAdminString (SIZE (1 .. 32))
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION

Top      Up      ToC       Page 45 
              "The applTransactKind index is the human-readable
               identifier for a particular transaction kind within
               the context of an application protocol.  The values
               to be used for a particular protocol may be identified
               in an applicability statement."
           ::= { applTransactKindEntry 1 }

   applTransactKindTrans OBJECT-TYPE
           SYNTAX        Counter64
           UNITS         "transactions"
           MAX-ACCESS    read-only
           STATUS        current
           DESCRIPTION
              "The applTransactKindTrans attribute reports the number
               of request/response (as indicated by the
               applTransactFlowReqRsp index) transactions
               received/generated (as indicated by the
               applTransactFlowDirection index) handled by this
               application instance or application element on this
               transaction stream for this transaction kind.

               Discontinuities in this counter can be detected
               by monitoring the corresponding instance of
               applOpenChannelOpenTime."
           ::= { applTransactKindEntry 2 }

   applTransactKindTransLow OBJECT-TYPE
           SYNTAX           Counter32
           UNITS            "transactions"
           MAX-ACCESS       read-only
           STATUS           current
           DESCRIPTION
              "The applTransactKindTransLow attribute reports
               the low thirty-two bits of applTransactKindTrans.

               Discontinuities in this counter can be detected
               by monitoring the corresponding instance of
               applOpenChannelOpenTime."
           ::= { applTransactKindEntry 3 }

   applTransactKindBytes OBJECT-TYPE
           SYNTAX        Counter64
           UNITS         "bytes"
           MAX-ACCESS    read-only
           STATUS        current
           DESCRIPTION
              "The applTransactKindBytes attribute reports the number
               of request/response (as indicated by the

Top      Up      ToC       Page 46 
               applTransactFlowReqRsp index) bytes received/generated
               (as indicated by the applTransactFlowDirection index)
               handled by this application element on this transaction
               stream for this transaction kind.

               All application layer bytes are included in this count,
               including any application layer wrappers, headers, or
               other overhead.

               Discontinuities in this counter can be detected
               by monitoring the corresponding instance of
               applOpenChannelOpenTime."
           ::= { applTransactKindEntry 4 }

   applTransactKindBytesLow OBJECT-TYPE
           SYNTAX           Counter32
           UNITS            "bytes"
           MAX-ACCESS       read-only
           STATUS           current
           DESCRIPTION
              "The applTransactKindBytesLow attribute corresponds
               to the low thirty-two bits of applTransactKindBytes.

               Discontinuities in this counter can be detected
               by monitoring the corresponding instance of
               applOpenChannelOpenTime."
           ::= { applTransactKindEntry 5 }

   applTransactKindTime OBJECT-TYPE
           SYNTAX       DateAndTime
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "The applTransactKindTime attribute records the time of
               the processing (receipt or transmission as indicated
               by the applTransactFlowDirection index) by this
               running application element or service instance of
               the most recent request/response (as indicated by
               the applTransactFlowReqRsp index) of this kind of
               transaction on this transaction stream.

               If no requests/responses of this kind been
               received/transmitted by this running application element
               or service instance over this transaction stream, the
               value of this attribute shall be '0000000000000000'H "
           DEFVAL { '0000000000000000'H }
           ::= { applTransactKindEntry 6 }

Top      Up      ToC       Page 47 
   -- ****************************************************************
   --
   --      applPastChannelGroup - logged information on former channels.
   --      These tables control the collection of channel history
   --      information and represent the accumulated historical data.
   --
   -- ****************************************************************

   applPastChannelControlTable OBJECT-TYPE
           SYNTAX           SEQUENCE OF ApplPastChannelControlEntry
           MAX-ACCESS       not-accessible
           STATUS           current
           DESCRIPTION
              "The applPastChannelControlTable controls the
               accumulation of history information about channels
               from the perspective of service instances and running
               application elements.  Entries in this table are indexed
               by applElmtOrSvc and applElmtOrSvcId, giving control
               of channel history accumulation at the level of each
               service instance and running application element."
           ::= { applPastChannelGroup 1 }

   applPastChannelControlEntry OBJECT-TYPE
           SYNTAX           ApplPastChannelControlEntry
           MAX-ACCESS       not-accessible
           STATUS           current
           DESCRIPTION
              "An applPastChannelControlEntry provides the ability
               to control the retention of channel history information
               by service instances and running application elements."
           INDEX           { applElmtOrSvc, applElmtOrSvcId }
           ::= { applPastChannelControlTable 1 }

   ApplPastChannelControlEntry  ::= SEQUENCE
           {
                   applPastChannelControlCollect   INTEGER,
                   applPastChannelControlMaxRows   Unsigned32,
                   applPastChannelControlTimeLimit Unsigned32,
                   applPastChannelControlRemItems  Counter32
           }

   applPastChannelControlCollect OBJECT-TYPE
           SYNTAX             INTEGER { enabled (1),
                                        frozen (2),
                                        disabled (3) }
           MAX-ACCESS         read-write
           STATUS             current
           DESCRIPTION

Top      Up      ToC       Page 48 
              "When the value of applPastChannelControlCollect is
               'enabled', each time the corresponding running
               application element or service instance closes
               an open channel a new entry will be added to the
               applPastChannelTable.

               When the value of applPastChannelControlCollect
               is 'frozen', no new entries are added to the
               applPastChannelTable for this running application
               element or service instance, and old entries are not
               aged out.

               When the value of applPastChannelControlCollect
               is 'disabled', all entries are removed from
               applPastChannelTable for this running application or
               service instance, and no new entries are added."
           DEFVAL { enabled }
           ::= { applPastChannelControlEntry 1 }

   applPastChannelControlMaxRows OBJECT-TYPE
           SYNTAX             Unsigned32
           UNITS              "channel history entries"
           MAX-ACCESS         read-write
           STATUS             current
           DESCRIPTION
              "The maximum number of entries allowed in the
               applPastChannelTable for this running application element
               or service instance.  Once the number of rows for this
               running application element or service instance in the
               applPastChannelTable reaches this value, when new
               entries are to be added the management subsystem will
               make room for them by removing the oldest entries.
               Entries will be removed on the basis of oldest
               applPastChannelCloseTime value first."
           DEFVAL          { 500 }
           ::= { applPastChannelControlEntry 2 }

   applPastChannelControlTimeLimit OBJECT-TYPE
           SYNTAX               Unsigned32
           UNITS                "seconds"
           MAX-ACCESS           read-write
           STATUS               current
           DESCRIPTION
              "The maximum time in seconds which an entry for this
               running application element or service instance
               may exist in the applPastChannelTable before it
               is removed.  Any entry that is older than this value
               will be removed (aged out) from the table, unless the

Top      Up      ToC       Page 49 
               applPastChannelControlCollect is set to 'frozen'.

               Note that an entry may be aged out prior to reaching
               this time limit if it is the oldest entry in the table
               and must be removed to make space for a new entry so
               as to not exceed applPastChannelControlMaxRows, or if the
               applPastChannelControlCollect is set to 'disabled'."
           DEFVAL          { 7200 }
           ::= { applPastChannelControlEntry 3 }

   applPastChannelControlRemItems OBJECT-TYPE
           SYNTAX              Counter32
           UNITS               "channel history entries"
           MAX-ACCESS          read-only
           STATUS              current
           DESCRIPTION
              "The applPastChannelControlRemItems attribute reports the
               number of applPastChannelControlTable entries for this
               running application element or service instance that
               were deleted in order to make room for new history
               entries.

               This count does NOT include entries deleted for the
               following reasons:
                   - the corresponding applPastChannelControlCollect
                     attribute has been set to 'disabled'

                   - the entry has been in the table longer that the
                     time limit indicated by the corresponding
                     applPastChannelControlTimeLimit.
             "
           ::= { applPastChannelControlEntry 4 }


   -- ****************************************************************
   --
   --      applPastChannelTable - Table of former channels
   --
   -- ****************************************************************

   applPastChannelTable   OBJECT-TYPE
           SYNTAX         SEQUENCE OF ApplPastChannelEntry
           MAX-ACCESS    not-accessible
           STATUS        current
           DESCRIPTION
              "The applPastChannelTable provides history information
               about channels from the perspective of running
               application elements and service instances.

Top      Up      ToC       Page 50 
               Entries in this table are indexed by applElmtOrSvc,
               applElmtOrSvcId, and by applPastChannelIndex, which
               serves to uniquely identify each former channel in the
               context of a running application element or service
               instance.

               Note that the value of applPastChannelIndex is
               independent of the value applOpenChannelIndex had when
               this channel was open.

               Entries for closed channels for a given running
               application element or service instance can
               be added to this table only if its entry in the
               applPastChannelControlTable has the value 'enabled'
               for the attribute applPastChannelControlCollect.

               Entries for closed channels are removed under the
               following circumstances:

                   - the running application element or service
                     instance no longer exists

                   - the corresponding applPastChannelControlCollect
                     attribute has been set to 'disabled'

                   - the entry has been in the table longer that the
                     time limit indicated by the corresponding
                     applPastChannelControlTimeLimit and the value of
                     applPastChannelControlCollect is not 'frozen'

                   - this is the oldest entry for the running
                     application element or service instance in
                     question and the addition of a new element would
                     otherwise cause applPastChannelControlMaxRows to
                     be exceeded for this running application element
                     or service instance.

                   - a value of applPastChannelIndex has been re-used.
                     Note that under normal circumstances, this is
                     unlikely.

               Removal/replacement of an entry under the
               last two conditions causes the corresponding
               applPastChannelControlRemItems to be incremented."
           ::= { applPastChannelGroup 2 }

Top      Up      ToC       Page 51 
   applPastChannelEntry   OBJECT-TYPE
           SYNTAX         ApplPastChannelEntry
           MAX-ACCESS     not-accessible
           STATUS         current
           DESCRIPTION
             "An applPastChannelEntry indicates that a running
              application element or service instance once had an open
              channel, which is now closed.  The entry has information
              describing that channel."
           INDEX       { applElmtOrSvc, applElmtOrSvcId,
                         applPastChannelIndex }
           ::= { applPastChannelTable 1 }

   ApplPastChannelEntry  ::= SEQUENCE
           {
                   applPastChannelIndex           Unsigned32,
                   applPastChannelOpenTime        DateAndTime,
                   applPastChannelCloseTime       DateAndTime,
                   applPastChannelReadRequests    Unsigned64TC,
                   applPastChannelReadReqsLow     Unsigned32,
                   applPastChannelReadFailures    Unsigned32,
                   applPastChannelBytesRead       Unsigned64TC,
                   applPastChannelBytesReadLow    Unsigned32,
                   applPastChannelLastReadTime    DateAndTime,
                   applPastChannelWriteRequests   Unsigned64TC,
                   applPastChannelWriteReqsLow    Unsigned32,
                   applPastChannelWriteFailures   Unsigned32,
                   applPastChannelBytesWritten    Unsigned64TC,
                   applPastChannelBytesWritLow    Unsigned32,
                   applPastChannelLastWriteTime   DateAndTime
           }

   applPastChannelIndex      OBJECT-TYPE
           SYNTAX            Unsigned32 (1..'ffffffff'h)
           MAX-ACCESS        not-accessible
           STATUS            current
           DESCRIPTION
              "This attribute serves to uniquely identify this closed
               channel in the context of the running application
               element or service instance.  This attribute has no
               other semantics.

               Note that the value of applPastChannelIndex is
               independent of the value applOpenChannelIndex had when
               this channel was active.

               In issuing this index value, the implementation must
               avoid re-issuing an index value which has already been

Top      Up      ToC       Page 52 
               assigned to an entry which has not yet been deleted due
               to age or space considerations.

               The value zero is excluded from the set of permitted
               values for this index in order to permit other tables to
               possibly represent information that cannot be associated
               with a specific entry in this table.  "
           ::= { applPastChannelEntry 1 }

   applPastChannelOpenTime OBJECT-TYPE
           SYNTAX          DateAndTime
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This attribute records the time when this channel was
               originally opened.  Note that this information is quite
               different from applOpenChannelOpenTime, which is used
               for the detection of counter discontinuities."
           ::= { applPastChannelEntry 2 }

   applPastChannelCloseTime OBJECT-TYPE
           SYNTAX           DateAndTime
           MAX-ACCESS       read-only
           STATUS           current
           DESCRIPTION
              "This attribute records the time when this channel
               was closed."
           ::= { applPastChannelEntry 3 }

   applPastChannelReadRequests OBJECT-TYPE
           SYNTAX              Unsigned64TC
           UNITS               "read requests"
           MAX-ACCESS          read-only
           STATUS              current
           DESCRIPTION
              "This attribute records the number of read requests for
               this channel made by this running application element or
               service instance.  All read requests for this channel by
               this running application element or service instance,
               regardless of completion status, are included in this
               count.  Read requests are counted in terms of system
               calls, rather than API calls."

           ::= { applPastChannelEntry 4 }

Top      Up      ToC       Page 53 
   applPastChannelReadReqsLow OBJECT-TYPE
           SYNTAX             Unsigned32
           UNITS              "read requests"
           MAX-ACCESS         read-only
           STATUS             current
           DESCRIPTION
              "This attribute corresponds to the low thirty-two bits
               of applPastChannelReadRequests."
           ::= { applPastChannelEntry 5 }

   applPastChannelReadFailures OBJECT-TYPE
           SYNTAX              Unsigned32
           UNITS               "failed read requests"
           MAX-ACCESS          read-only
           STATUS              current
           DESCRIPTION
              "This attribute reports the number of failed read
               requests."
           ::= { applPastChannelEntry 6 }

   applPastChannelBytesRead OBJECT-TYPE
           SYNTAX           Unsigned64TC
           UNITS            "bytes"
           MAX-ACCESS       read-only
           STATUS           current
           DESCRIPTION
              "This attribute reports the number of bytes read from this
               channel by this running application element or service
               instance.  Only bytes successfully read are included in
               this count. "
           ::= { applPastChannelEntry 7 }

   applPastChannelBytesReadLow OBJECT-TYPE
           SYNTAX              Unsigned32
           UNITS               "bytes"
           MAX-ACCESS          read-only
           STATUS              current
           DESCRIPTION
              "This attribute corresponds to the low thirty-two bits
               of applPastChannelBytesRead."
           ::= { applPastChannelEntry 8 }

   applPastChannelLastReadTime OBJECT-TYPE
           SYNTAX              DateAndTime
           MAX-ACCESS          read-only
           STATUS              current

Top      Up      ToC       Page 54 
           DESCRIPTION
              "This attribute reports the time of the most recent read
               request made by this running application element or
               service instance regardless of completion status, for
               this former channel.

               If no read requests have been made , the value of this
               attribute shall be '0000000000000000'H "
           DEFVAL { '0000000000000000'H }
           ::= { applPastChannelEntry 9 }

   applPastChannelWriteRequests OBJECT-TYPE
           SYNTAX               Unsigned64TC
           UNITS                "write requests"
           MAX-ACCESS           read-only
           STATUS               current
           DESCRIPTION
              "The applPastChannelWriteRequests attribute reports
               the number of write requests, regardless of completion
               status, made by this running application element or
               service instance for this former channel.

               Write requests are counted in terms of system calls,
               rather than API calls."
           ::= { applPastChannelEntry 10 }

   applPastChannelWriteReqsLow OBJECT-TYPE
           SYNTAX              Unsigned32
           UNITS               "write requests"
           MAX-ACCESS          read-only
           STATUS              current
           DESCRIPTION
              "This attribute corresponds to the low thirty-two
               bits of applPastChannelWriteRequests."
           ::= { applPastChannelEntry 11 }

   applPastChannelWriteFailures OBJECT-TYPE
           SYNTAX               Unsigned32
           UNITS                "failed write requests"
           MAX-ACCESS           read-only
           STATUS               current
           DESCRIPTION
              "This attribute reports the number of failed write
               requests."
           ::= { applPastChannelEntry 12 }

Top      Up      ToC       Page 55 
   applPastChannelBytesWritten OBJECT-TYPE
           SYNTAX              Unsigned64TC
           UNITS               "bytes"
           MAX-ACCESS          read-only
           STATUS              current
           DESCRIPTION
              "This attribute reports the number of bytes written to
               this former channel by this running application element
               or service instance.  Only bytes successfully written
               (no errors reported by the API in use by the application)
               are included in this count."
           ::= { applPastChannelEntry 13 }

   applPastChannelBytesWritLow OBJECT-TYPE
           SYNTAX              Unsigned32
           UNITS               "bytes"
           MAX-ACCESS          read-only
           STATUS              current
           DESCRIPTION
              "This attribute corresponds to the low thirty-two bits of
               applPastChannelBytesWritten."
           ::= { applPastChannelEntry 14 }

   applPastChannelLastWriteTime OBJECT-TYPE
           SYNTAX               DateAndTime
           MAX-ACCESS           read-only
           STATUS               current
           DESCRIPTION
              "The applPastChannelLastWriteTime attribute reports
               the time of the most recent write request made by
               this running application element or service instance,
               regardless of completion status, for this former
               channel.

               If no write requests have been made the value of this
               attribute shall be '0000000000000000'H "
           DEFVAL { '0000000000000000'H }
           ::= { applPastChannelEntry 15 }

   -- ****************************************************************
   --
   --      applPastFileTable - information specific to former files
   --
   -- ****************************************************************

Top      Up      ToC       Page 56 
   applPastFileTable  OBJECT-TYPE
           SYNTAX     SEQUENCE OF ApplPastFileEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
              "The applPastFileTable supplements the
               applPastChannelTable for entries corresponding to
               channels which were files.  The indexing structure is
               identical to applPastChannelTable.  An entry exists in
               the applPastFileTable only if there is a corresponding
               (same index values) entry in the applPastChannelTable
               and if the channel was a file.

               Entries for closed files are removed when the
               corresponding entries are removed from the
               applPastChannelTable."
           ::= { applPastChannelGroup 3 }

   applPastFileEntry   OBJECT-TYPE
           SYNTAX      ApplPastFileEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
             "An applPastFileEntry provides additional, file-specific
              information to complement the corresponding
              applPastChannelEntry for a channel which was a file."
           INDEX       { applElmtOrSvc, applElmtOrSvcId,
                         applPastChannelIndex }
           ::= { applPastFileTable 1 }

   ApplPastFileEntry ::= SEQUENCE
           {
                   applPastFileName                LongUtf8String,
                   applPastFileSizeHigh            Unsigned32,
                   applPastFileSizeLow             Unsigned32,
                   applPastFileMode                INTEGER
           }


   applPastFileName   OBJECT-TYPE
           SYNTAX     LongUtf8String
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
             "This attribute records the last known value of
              applOpenFileName before the channel was closed."
           ::= { applPastFileEntry 1 }

Top      Up      ToC       Page 57 
   applPastFileSizeHigh OBJECT-TYPE
           SYNTAX       Unsigned32
           UNITS        "2^32 byte blocks"
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
             "This attribute records the value of applOpenFileSizeHigh
              at the time this channel was closed.

              For example, for a file with a total size of
              4,294,967,296 bytes, this attribute would have a value
              of 1; for a file with a total size of 4,294,967,295
              bytes this attribute's value would be 0."
           ::= { applPastFileEntry 2 }

   applPastFileSizeLow OBJECT-TYPE
           SYNTAX      Unsigned32
           UNITS       "bytes"
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "This attribute records the value of applOpenFileSizeLow
               at the time this channel was closed.

               For example, for a file with a total size of
               4,294,967,296 bytes this attribute would have a value
               of 0; for a file with a total size of 4,294,967,295
               bytes this attribute's value would be 4,294,967,295."
           ::= { applPastFileEntry 3 }

   applPastFileMode   OBJECT-TYPE
           SYNTAX     INTEGER { read(1),
                                write(2),
                                readWrite(3) }
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
              "This attribute records the value of applOpenFileMode
               at the time this channel was closed.  "
           ::= { applPastFileEntry 4 }

   -- ****************************************************************
   --
   --      applPastConTable - information specific to former connections
   --
   -- ****************************************************************

Top      Up      ToC       Page 58 
   applPastConTable OBJECT-TYPE
           SYNTAX    SEQUENCE OF ApplPastConEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
              "The applPastConTable supplements the applPastChannelTable
               for entries corresponding to channels which were
               connections.  The indexing structure is identical
               to applPastChannelTable.  An entry exists in the
               applPastConTable only if there is a corresponding
               (same index values) entry in the applPastChannelTable
               and if the channel was a connection.

               Entries for closed connections are removed when
               the corresponding entries are removed from the
               applPastChannelTable."
           ::= { applPastChannelGroup 4 }

   applPastConEntry   OBJECT-TYPE
           SYNTAX      ApplPastConEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
             "An applPastConEntry provides additional,
              connection-specific information to complement the
              corresponding applPastChannelEntry for a channel which
              was a connection."
           INDEX       { applElmtOrSvc, applElmtOrSvcId,
                         applPastChannelIndex }
           ::= { applPastConTable 1 }

   ApplPastConEntry ::= SEQUENCE
           {
                   applPastConTransport       TDomain,
                   applPastConNearEndAddr     ApplTAddress,
                   applPastConNearEndpoint    SnmpAdminString,
                   applPastConFarEndAddr      ApplTAddress,
                   applPastConFarEndpoint     SnmpAdminString,
                   applPastConApplication     SnmpAdminString
           }

   applPastConTransport OBJECT-TYPE
           SYNTAX       TDomain
           MAX-ACCESS   read-only
           STATUS       current

Top      Up      ToC       Page 59 
           DESCRIPTION
              "The applPastConTransport attribute identifies the
               transport protocol that was in use for this former
               connection.  If the transport protocol could not be
               determined, the value { 0 0 } shall be used."
           DEFVAL { zeroDotZero }
           ::= { applPastConEntry 1 }

   applPastConNearEndAddr OBJECT-TYPE
           SYNTAX         ApplTAddress
           MAX-ACCESS     read-only
           STATUS         current
           DESCRIPTION
              "The applPastConNearEndAddr attribute reports the
               transport address and port information for the near
               end of this former connection.

               If the information could not be determined, the value
               shall be a zero-length string."
           DEFVAL { "" }
           ::= { applPastConEntry 2 }

   applPastConNearEndpoint OBJECT-TYPE
           SYNTAX          SnmpAdminString
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "The applPastConNearEndpoint attribute reports the
               fully-qualified domain name and port information for the
               near end of this former connection.

               The format of this attribute for TCP and UDP-based
               protocols is the fully-qualified domain name immediately
               followed by a colon which is immediately followed by
               the decimal representation of the port number.

               If the information could not be determined, the value
               shall be a zero-length string."
           DEFVAL { "" }
           ::= { applPastConEntry 3 }

   applPastConFarEndAddr OBJECT-TYPE
           SYNTAX        ApplTAddress
           MAX-ACCESS    read-only
           STATUS        current
           DESCRIPTION
              "The applPastConFarEnd attribute reports the transport
               address and port information for the far end of this

Top      Up      ToC       Page 60 
               former connection.

               If not known, as in the case of a connectionless
               transport, the value of this attribute shall be a
               zero-length string."
           DEFVAL { "" }
           ::= { applPastConEntry 4 }

   applPastConFarEndpoint OBJECT-TYPE
           SYNTAX        SnmpAdminString
           MAX-ACCESS    read-only
           STATUS        current
           DESCRIPTION
              "The applPastConFarEndpoint attribute reports the
               transport address and port information for the far
               end of this former connection.

               The format of this attribute for TCP and UDP-based
               protocols is the fully-qualified domain name immediately
               followed by a colon which is immediately followed by
               the decimal representation of the port number.

               If not known, as in the case of a connectionless
               transport, the value of this attribute shall be a
               zero-length string."
           DEFVAL { "" }
           ::= { applPastConEntry 5 }

   applPastConApplication OBJECT-TYPE
           SYNTAX         SnmpAdminString
           MAX-ACCESS     read-only
           STATUS         current
           DESCRIPTION
              "The applPastConApplication attribute identifies the
               application layer protocol that was in use.  Where
               possible, the values defined in [13] shall be used.
               If not known, the value of this attribute shall be a
               zero-length string."
           DEFVAL { "" }
           ::= { applPastConEntry 6 }


   -- ****************************************************************
   --
   --      applPastTransStreamTable - historical
   --      information for transaction stream monitoring
   --
   -- ****************************************************************

Top      Up      ToC       Page 61 
   applPastTransStreamTable OBJECT-TYPE
           SYNTAX             SEQUENCE OF ApplPastTransStreamEntry
           MAX-ACCESS         not-accessible
           STATUS             current
           DESCRIPTION
              "The applPastTransStreamTable contains common
               information for historical transaction statistics."
           ::= { applPastChannelGroup 5 }

   applPastTransStreamEntry OBJECT-TYPE
           SYNTAX             ApplPastTransStreamEntry
           MAX-ACCESS         not-accessible
           STATUS             current
           DESCRIPTION
              "An applPastTransStreamEntry contains information for
               a single former transaction stream.  A transaction
               stream could have been a network connection, file, or
               other source of transactions."
           INDEX           { applElmtOrSvc, applElmtOrSvcId,
                             applPastChannelIndex }
           ::= { applPastTransStreamTable 1 }

   ApplPastTransStreamEntry ::= SEQUENCE {
           applPastTransStreamDescr        SnmpAdminString,
           applPastTransStreamUnitOfWork   SnmpAdminString,
           applPastTransStreamInvokes      Unsigned64TC,
           applPastTransStreamInvokesLow   Unsigned32,
           applPastTransStreamInvCumTimes  Unsigned32,
           applPastTransStreamInvRspTimes  Unsigned32,
           applPastTransStreamPerforms     Unsigned64TC,
           applPastTransStreamPerformsLow  Unsigned32,
           applPastTransStreamPrfCumTimes  Unsigned32,
           applPastTransStreamPrfRspTimes  Unsigned32 }
   applPastTransStreamDescr OBJECT-TYPE
           SYNTAX          SnmpAdminString
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "The applPastTransStreamDescr attribute provides a
               human-readable description of this transaction stream.

               If no descriptive information is available, this
               attribute's value shall be a zero-length string."
           DEFVAL { "" }
           ::= { applPastTransStreamEntry 1 }

Top      Up      ToC       Page 62 
   applPastTransStreamUnitOfWork OBJECT-TYPE
           SYNTAX               SnmpAdminString
           MAX-ACCESS           read-only
           STATUS               current
           DESCRIPTION
              "The applPastTransStreamUnitOfWork attribute provides a
               human-readable definition of what the unit of work is
               for this transaction stream.

               If no descriptive information is available, this
               attribute's value shall be a zero-length string."
           DEFVAL { "" }
           ::= { applPastTransStreamEntry 2 }

   applPastTransStreamInvokes OBJECT-TYPE
           SYNTAX            Unsigned64TC
           UNITS             "transactions"
           MAX-ACCESS        read-only
           STATUS            current
           DESCRIPTION
              "Cumulative count of requests / invocations issued
               for this transaction stream when it was active."
           ::= { applPastTransStreamEntry 3 }

   applPastTransStreamInvokesLow OBJECT-TYPE
           SYNTAX               Unsigned32
           UNITS                "transactions"
           MAX-ACCESS           read-only
           STATUS               current
           DESCRIPTION
              "This object corresponds to the low thirty-two
               bits of applPastTransStreamInvokes."
           ::= { applPastTransStreamEntry 4 }

   applPastTransStreamInvCumTimes OBJECT-TYPE
           SYNTAX                Unsigned32
           UNITS                 "milliseconds"
           MAX-ACCESS            read-only
           STATUS                current
           DESCRIPTION
              "The applPastTransStreamInvCumTimes attribute reports the
               cumulative sum of the lengths of the intervals times
               measured between the transmission of requests and the
               receipt of (the first of) the corresponding response(s)."
           ::= { applPastTransStreamEntry 5 }

Top      Up      ToC       Page 63 
   applPastTransStreamInvRspTimes OBJECT-TYPE
           SYNTAX                Unsigned32
           UNITS                 "milliseconds"
           MAX-ACCESS            read-only
           STATUS                current
           DESCRIPTION
              "The applPastTransStreamInvRspTimes attribute reports the
               cumulative sum of the lengths of the intervals measured
               between the receipt of the first and last of multiple
               responses to a request.

               For transaction streams which do not permit multiple
               responses to a single request, this attribute will be
               zero."
           ::= { applPastTransStreamEntry 6 }

   applPastTransStreamPerforms OBJECT-TYPE
           SYNTAX             Unsigned64TC
           UNITS              "transactions"
           MAX-ACCESS         read-only
           STATUS             current
           DESCRIPTION
              "Total number of transactions performed."
           ::= { applPastTransStreamEntry 7 }

   applPastTransStreamPerformsLow OBJECT-TYPE
           SYNTAX                Unsigned32
           UNITS                 "transactions"
           MAX-ACCESS            read-only
           STATUS                current
           DESCRIPTION
              "This objecy reports the low thirty-two bits of
               applPastTransStreamPerforms."
           ::= { applPastTransStreamEntry 8 }

   applPastTransStreamPrfCumTimes OBJECT-TYPE
           SYNTAX                Unsigned32
           UNITS                 "milliseconds"
           MAX-ACCESS            read-only
           STATUS                current
           DESCRIPTION
              "The applPastTransStreamPrfCumTimes attribute reports the
               cumulative sum of the lengths of the intervals measured
               between receipt of requests and the transmission of the
               corresponding responses."
           ::= { applPastTransStreamEntry 9 }

Top      Up      ToC       Page 64 
   applPastTransStreamPrfRspTimes OBJECT-TYPE
           SYNTAX                 Unsigned32
           UNITS                  "milliseconds"
           MAX-ACCESS             read-only
           STATUS                 current
           DESCRIPTION
              "For each transaction performed, the elapsed time between
               when the first response is enqueued and when the last
               response is enqueued is added to this cumulative sum.

               For single-response protocols, the value of
               applPastTransStreamPrfRspTimes will be zero."
           ::= { applPastTransStreamEntry 10 }


   -- ****************************************************************
   --
   --      applPastTransFlowTable
   --
   -- ****************************************************************

   applPastTransFlowTable OBJECT-TYPE
           SYNTAX        SEQUENCE OF ApplPastTransFlowEntry
           MAX-ACCESS    not-accessible
           STATUS        current
           DESCRIPTION
              "The applPastTransFlowTable contains entries, organized by
               application instance or running application element,
               direction of flow, and type (request/response) for each
               former transaction stream.

               The simple model of a transaction used here looks like
               this:

                   invoker  |   Request     | performer
                            | - - - - - - > |
                            |               |
                            |   Response    |
                            | < - - - - - - |
                            |               |

               Since in some protocols it is possible for an entity
               to take on both the invoker and performer roles,
               information here is accumulated for transmitted and
               received requests, as well as for transmitted and
               received responses.  Counts are maintained for both
               transactions and bytes transferred."
           ::= { applPastChannelGroup 6 }

Top      Up      ToC       Page 65 
   applPastTransFlowEntry OBJECT-TYPE
           SYNTAX        ApplPastTransFlowEntry
           MAX-ACCESS    not-accessible
           STATUS        current
           DESCRIPTION
              "An applPastTransFlowEntry records transaction throughput
               information for requests or response in a particular
               direction (transmit / receive) for a transaction stream.

               Entries in this table correspond to those in the
               applPastTransStreamTable with identical values
               for the applElmtOrSvc, applElmtOrSvcId, and the
               applPastChannelIndex."
           INDEX           { applElmtOrSvc,
                             applElmtOrSvcId,
                             applPastChannelIndex,
                             applPastTransFlowDirection,
                             applPastTransFlowReqRsp }
           ::= { applPastTransFlowTable 1 }

   ApplPastTransFlowEntry ::= SEQUENCE {
                   applPastTransFlowDirection INTEGER,
                   applPastTransFlowReqRsp    INTEGER,
                   applPastTransFlowTrans     Unsigned64TC,
                   applPastTransFlowTransLow  Unsigned32,
                   applPastTransFlowBytes     Unsigned64TC,
                   applPastTransFlowBytesLow  Unsigned32,
                   applPastTransFlowTime      DateAndTime }

   applPastTransFlowDirection OBJECT-TYPE
           SYNTAX             INTEGER { transmit(1),
                                        receive(2) }
           MAX-ACCESS         not-accessible
           STATUS             current
           DESCRIPTION
               "The applPastTransFlowDirection index serves
                to identify an entry as containing information
                pertaining to the transmit (1) or receive (2) flow
                of a past transaction stream.  This index corresponds
                to applTransactFlowDirection."
           ::= { applPastTransFlowEntry 1 }

   applPastTransFlowReqRsp OBJECT-TYPE
           SYNTAX          INTEGER { request(1),
                                     response(2) }
           MAX-ACCESS      not-accessible
           STATUS          current
           DESCRIPTION

Top      Up      ToC       Page 66 
              "The value of the applPastTransFlowReqRsp index indicates
               whether this entry contains information on requests
               (1), or responses (2).  This index corresponds to
               applTransactFlowReqRsp."
           ::= { applPastTransFlowEntry 2 }

   applPastTransFlowTrans OBJECT-TYPE
           SYNTAX        Unsigned64TC
           UNITS         "transactions"
           MAX-ACCESS    read-only
           STATUS        current
           DESCRIPTION
               "The applPastTransFlowTrans attribute reports the number
                of request/response (as indicated by the
                applPastTransFlowReqRsp index) transactions
                received/generated (as indicated by the
                applPastTransFlowDirection index) handled on this
                transaction stream."
           ::= { applPastTransFlowEntry 3 }

   applPastTransFlowTransLow OBJECT-TYPE
           SYNTAX           Unsigned32
           UNITS            "transactions"
           MAX-ACCESS       read-only
           STATUS           current
           DESCRIPTION
               "This attribute corresponds to the low thirty-two
                bits of applPastTransFlowTrans."
           ::= { applPastTransFlowEntry 4 }

   applPastTransFlowBytes OBJECT-TYPE
           SYNTAX        Unsigned64TC
           UNITS         "bytes"
           MAX-ACCESS    read-only
           STATUS        current
           DESCRIPTION
              "The applPastTransFlowBytes attribute reports the number
               of request/response (as indicated by the
               applPastTransFlowReqRsp index) bytes received/generated
               (as indicated by the applPastTransFlowDirection index)
               handled on this transaction stream.

               All application layer bytes are included in this count,
               including any application layer wrappers, headers, or
               other overhead."
           ::= { applPastTransFlowEntry 5 }

Top      Up      ToC       Page 67 
   applPastTransFlowBytesLow OBJECT-TYPE
           SYNTAX           Unsigned32
           UNITS            "bytes"
           MAX-ACCESS       read-only
           STATUS           current
           DESCRIPTION
              "This attribute corresponds to the low thirty-two
               bits of applPastTransFlowBytes."
           ::= { applPastTransFlowEntry 6 }

   applPastTransFlowTime OBJECT-TYPE
           SYNTAX       DateAndTime
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "The applPastTransFlowTime attribute records the time of
               the processing (receipt or transmission as
               indicated by the applPastTransFlowDirection index)
               of the last request/response (as indicated by the
               applPastTransFlowReqRsp index) on this transaction
               stream.

               If no requests/responses been received/transmitted by
               this entity over this transaction stream, the value
               of this attribute shall be '0000000000000000'H "
           DEFVAL { '0000000000000000'H }
           ::= { applPastTransFlowEntry 7 }

   -- ****************************************************************
   --
   --      applPastTransKindTable - transaction statistics broken down
   --      according to the kinds of transactions in each direction
   --      for a transaction stream.
   --
   -- ****************************************************************

   applPastTransKindTable   OBJECT-TYPE
           SYNTAX SEQUENCE OF ApplPastTransKindEntry
           MAX-ACCESS      not-accessible
           STATUS          current
           DESCRIPTION
              "The applPastTransKindTable provides transaction
               statistics broken down by kinds of transaction.
               The definition of the kinds of transactions is
               specific to the application protocol in use, and may be
               documented in the form of an applicability statement.  "
           ::= { applPastChannelGroup 7 }


Next RFC Part