5.1.1  P-CCPCH RSCP  p. 10

5.1.2  CPICH RSCP  p. 10

5.1.3  Timeslot ISCP  p. 10

5.1.4  UTRA carrier RSSI  p. 10

5.1.5  GSM carrier RSSI  p. 11

5.1.6  SIR  p. 11

5.1.7  CPICH Ec/No  p. 11

5.1.8  Transport channel BLER  p. 11

5.1.9  UE transmitted power  p. 12

5.1.10  SFN-SFN observed time difference  p. 13

5.1.11  SFN-CFN observed time difference  p. 14

5.1.12  Observed time difference to GSM cell  p. 14

5.1.13  UE GPS Timing of Cell Frames for UE positioning  p. 15

5.1.14  Timing Advance (TADV) for 1.28Mcps TDD |R4|  p. 15

5.1.15  UE GPS code phase |R4|  p. 15

5.1.16  UE transmission power headroom (1.28Mcps option only) |R7|  p. 16

5.1.17  UE transmission power headroom (3.84Mcps and 7.68Mcps options) |R7|  p. 16

5.1.18  E-UTRA RSRP |R8|  p. 17

5.1.19  E-UTRA RSRQ |R8|  p. 17

5.1.20  IEEE 802.11 Beacon RSSI |R12|  p. 18

5.2.1  RSCP  p. 18

5.2.2  Timeslot ISCP  p. 18

5.2.3  Received total wide band power  p. 18

5.2.4  SIR  p. 19

5.2.5  Transport channel BER  p. 19

5.2.6  Transmitted carrier power  p. 19

5.2.7  Transmitted code power  p. 19

5.2.8  RX Timing Deviation  p. 20

5.2.9  UTRAN GPS Timing of Cell Frames for UE positioning  p. 20

5.2.10  SFN-SFN observed time difference |R4|  p. 20

5.2.11  Cell Sync Burst Timing |R4|  p. 21

5.2.12  Cell Sync Burst SIR |R4|  p. 21

5.2.13  Received SYNC-UL Timing Deviation for 1.28Mcps TDD |R4|  p. 22

5.2.14  Angle of Arrival (AOA) for 1.28Mcps TDD |R5|  p. 22

5.2.15  HS-SICH reception quality |R5|  p. 22

5.2.16  Transmitted carrier power of all codes not used for HS-PDSCH, HS-SCCH, E-AGCH, or E-HICH transmission |R5|  p. 23

5.2.17  UpPTS interference (1.28Mcps TDD) |R6|  p. 23

A.1.1  Higher data rate traffic using more than 1 uplink and/or 1 downlink TDD timeslot  p. 25

A.2.1  Higher data rate traffic using more than 1 uplink and/or 1 downlink TDD timeslot (for 1.28Mcps TDD)  p. 27