Tech-invite3GPPspecsGlossariesIETFRFCsGroupsSIPABNFsWorld Map
Top   in Index   Prev   Next

TR 25.816 (RAN)
UMTS 900 MHz Work Item technical report

ToC   3GPP‑Page   Help    
V8.0.0 (Wzip)  2009/09  105 p.
V7.0.0  2005/12  94 p.


Rapporteur:  Dr. Li, Yannick
See also:  –

This document is the technical report of the UMTS 900 MHz WI which was approved in TSG RAN meeting #26.

The purpose of this TR is to summarize the study of radio frequency (RF) requirements for UTRA-FDD operating in the 900 MHz Band defined as follows :
  • 880 – 915 MHz: Up-link (UE transmit, Node B receive)
  • 925 – 960 MHz: Down-link (Node B transmit, UE receive).


 

Here   Top

 

 

1  ScopeWord-p. 7
2  References
3  Definitions, symbols and abbreviationsWord-p. 8
4  Study of the RF requirementsWord-p. 9
4.1  Reusability of existing UMTS 850 and UMTS 1800 MHz simulation results and RF requirements
4.2  Additional deployment scenarios and simulation results
4.2.1  Scenario_1: UMTS(macro)-GSM(macro) in Urban area with cell range of 500 m in uncoordinated operationWord-p. 10
4.2.2  Scenario_2: UMTS(macro)-GSM(macro) in Rural area with cell range of 5000 m in uncoordinated operation
4.2.3  Scenario_3: UMTS(macro)-GSM(macro) in Rural area with cell range of 5000 m in coordinated operation
4.2.4  Scenario_4: UMTS(macro)-UMTS(macro) in Rural area with cell range of 5000 m in uncoordinated operation
4.2.5  Scenario_5: UMTS(macro)-GSM(micro) in Urban area in uncoordinated operationWord-p. 41
4.2.6  Scenario_6: UMTS(macro)-GSM(pico) in Urban area in uncoordinated operationWord-p. 53
4.2.7  Compatibility between GSM MCBTS and UMTS 900 systemsWord-p. 62
4.3  Channel Raster
4.4  Specific Node B requirements for UMTS900Word-p. 70
4.5  UE Rx sensitivity and possible impact on network coverage & capacityWord-p. 82
4.6  Specific UE requirements for UMTS900
5  Required changes to the SpecificationsWord-p. 97
6  ConclusionWord-p. 101
A  Intermodulation characteristicsWord-p. 102
B  Change historyWord-p. 105

Up   Top