RFC 5833
Control and Provisioning of Wireless Access Points (CAPWAP) Protocol Base MIB
Pages: 73
Informational
Informational
Part 2 of 4 – Pages 14 to 32
9. Definitions
CAPWAP-BASE-MIB DEFINITIONS ::= BEGIN IMPORTS PhysAddress, TEXTUAL-CONVENTION, TruthValue, DateAndTime, RowStatus FROM SNMPv2-TC LongUtf8String FROM SYSAPPL-MIB InterfaceIndex, ifGeneralInformationGroup FROM IF-MIB PhysicalIndex FROM ENTITY-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB NOTIFICATION-GROUP, OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2, Integer32, Unsigned32, Counter32, Gauge32, TimeTicks
FROM SNMPv2-SMI
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
capwapBaseMIB MODULE-IDENTITY
LAST-UPDATED "201004300000Z" -- 30 April 2010
ORGANIZATION "IETF Control And Provisioning of Wireless Access
Points (CAPWAP) Working Group
http://www.ietf.org/html.charters/capwap-charter.html"
CONTACT-INFO
"General Discussion: capwap@frascone.com
To Subscribe: http://lists.frascone.com/mailman/listinfo/capwap
Yang Shi (editor)
Hangzhou H3C Tech. Co., Ltd.
Beijing R&D Center of H3C, Digital Technology Plaza
NO. 9 Shangdi 9th Street, Haidian District
Beijing 100085
China
Phone: +86 010 82775276
Email: rishyang@gmail.com
David T. Perkins (editor)
228 Bayview Dr.
San Carlos, CA 94070
USA
Phone: +1 408 394-8702
Email: dperkins@dsperkins.com
Chris Elliott (editor)
1516 Kent St.
Durham, NC 27707
USA
Phone: +1 919-308-1216
Email: chelliot@pobox.com
Yong Zhang (editor)
Fortinet, Inc.
1090 Kifer Road
Sunnyvale, CA 94086
USA
Email: yzhang@fortinet.com"
DESCRIPTION
"Copyright (c) 2010 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this MIB module is part of RFC 5833;
see the RFC itself for full legal notices.
This MIB module contains managed object definitions for
the CAPWAP Protocol."
REVISION "201004300000Z"
DESCRIPTION
"Initial version published as RFC 5833"
::= { mib-2 196 }
-- Textual Conventions
CapwapBaseWtpProfileIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Represents the unique identifier of a WTP profile."
SYNTAX Unsigned32 (0..4096)
CapwapBaseWtpIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"Represents the unique identifier of a WTP instance.
As usual, the Base MAC address of the WTP is used."
SYNTAX OCTET STRING (SIZE(6|8))
CapwapBaseStationIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"Represents the unique identifier of a station instance.
As usual, the MAC address of the station is used."
SYNTAX OCTET STRING (SIZE(6|8))
CapwapBaseRadioIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Represents the unique identifier of a radio on a WTP."
SYNTAX Unsigned32 (1..31)
CapwapBaseTunnelModeTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the tunneling modes of operation that are
supported by a WTP.
The WTP MAY support more than one option, represented by
the bit field below:
localBridging(0) - Local bridging mode
dot3Tunnel(1) - 802.3 frame tunnel mode
nativeTunnel(2) - Native frame tunnel mode"
REFERENCE
"Section 4.6.43 of CAPWAP Protocol Specification, RFC 5415."
SYNTAX BITS {
localBridging(0),
dot3Tunnel(1),
nativeTunnel(2)
}
CapwapBaseMacTypeTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the MAC mode of operation supported by a WTP.
The following enumerated values are supported:
localMAC(0) - Local-MAC mode
splitMAC(1) - Split-MAC mode
both(2) - Both Local-MAC and Split-MAC
Note that the CAPWAP field [RFC5415] modeled by this
object takes zero as starting value; this MIB object
follows that rule."
REFERENCE
"Section 4.6.44 of CAPWAP Protocol Specification, RFC 5415."
SYNTAX INTEGER {
localMAC(0),
splitMAC(1),
both(2)
}
CapwapBaseChannelTypeTC::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the channel type for CAPWAP protocol.
The following enumerated values are supported:
data(1) - Data channel
control(2) - Control channel"
SYNTAX INTEGER {
data(1),
control(2)
}
CapwapBaseAuthenMethodTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the authentication credential type for a WTP.
The following enumerated values are supported:
other(1) - Other method, for example, vendor specific
clear(2) - Clear text and no authentication
x509(3) - X.509 certificate authentication
psk(4) - Pre-Shared secret authentication
As a mandatory requirement, CAPWAP control channel
authentication SHOULD use DTLS, either by certificate or
PSK. For data channel authentication, DTLS is optional."
SYNTAX INTEGER {
other(1),
clear(2),
x509(3),
psk(4)
}
-- Top-level components of this MIB module
-- Notifications
capwapBaseNotifications OBJECT IDENTIFIER
::= { capwapBaseMIB 0 }
-- Tables, Scalars
capwapBaseObjects OBJECT IDENTIFIER
::= { capwapBaseMIB 1 }
-- Conformance
capwapBaseConformance OBJECT IDENTIFIER
::= { capwapBaseMIB 2 }
-- AC Objects Group
capwapBaseAc OBJECT IDENTIFIER
::= { capwapBaseObjects 1 }
capwapBaseWtpSessions OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the total number of WTPs that are connecting to
the AC."
REFERENCE
"Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 1 }
capwapBaseWtpSessionsLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the maximum number of WTP sessions configured on
the AC.
The value of the object is persistent at restart/reboot."
REFERENCE
"Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 2 }
capwapBaseStationSessions OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the total number of stations that are accessing
the wireless service provided by the AC."
REFERENCE
"Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 3 }
capwapBaseStationSessionsLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the maximum number of station sessions configured
on the AC.
The value of the object is persistent at restart/reboot."
REFERENCE
"Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 4 }
capwapBaseDataChannelDTLSPolicyOptions OBJECT-TYPE
SYNTAX BITS {
other(0),
clear(1),
dtls(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC communicates its policy on the use of DTLS for
the CAPWAP data channel.
The AC MAY support more than one option, represented by the bit
field below:
other(0) - Other method, for example, vendor specific
clear(1) - Clear text
dtls(2) - DTLS"
REFERENCE
"Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 5 }
capwapBaseControlChannelAuthenOptions OBJECT-TYPE
SYNTAX BITS {
x509(0),
psk(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the authentication credential type supported by the
AC for CAPWAP control channel.
The AC MAY support more than one option, represented by the bit
field below:
x509(0) - X.509 certificate based
psk(1) - Pre-Shared secret"
REFERENCE
"Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 6 }
-- capwapBaseAcNameListTable table
capwapBaseAcNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF CapwapBaseAcNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that configure the AC name list.
Values of all read-create objects in this table are
persistent at restart/reboot."
REFERENCE
"Section 4.6.5 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 9 }
capwapBaseAcNameListEntry OBJECT-TYPE
SYNTAX CapwapBaseAcNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that configures the AC name list."
INDEX { capwapBaseAcNameListId }
::= { capwapBaseAcNameListTable 1 }
CapwapBaseAcNameListEntry ::= SEQUENCE {
capwapBaseAcNameListId Unsigned32,
capwapBaseAcNameListName LongUtf8String,
capwapBaseAcNameListPriority Unsigned32,
capwapBaseAcNameListRowStatus RowStatus
}
capwapBaseAcNameListId OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents the unique identifier of an AC Name list."
::= { capwapBaseAcNameListEntry 1 }
capwapBaseAcNameListName OBJECT-TYPE
SYNTAX LongUtf8String (SIZE(1..512))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the name of an AC, and it is expected to be
an UTF-8 encoded string."
REFERENCE
"Section 4.6.5 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAcNameListEntry 2 }
capwapBaseAcNameListPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the priority order of the preferred AC.
For instance, the value of one (1) is used to set the primary
AC, the value of two (2) is used to set the secondary AC, etc."
REFERENCE
"Section 4.6.5 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAcNameListEntry 3 }
capwapBaseAcNameListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create, modify, and/or delete a row
in this table.
The value of capwapBaseAcNameListName and
capwapBaseAcNameListPriority can be changed when this
object is in state 'active' or in 'notInService'.
The capwapBaseAcNameListRowStatus may be changed to 'active'
if all the managed objects in the conceptual row with
MAX-ACCESS read-create have been assigned valid values."
::= { capwapBaseAcNameListEntry 4 }
-- End of capwapBaseAcNameListTable table
-- capwapBaseMacAclTable table
capwapBaseMacAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF CapwapBaseMacAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that configure station Access Control
Lists (ACLs).
The WTP will not provide service to the MAC addresses
configured in this table.
Values of all read-create objects in this table are persistent
at AC restart/reboot."
REFERENCE
"Section 4.6.7 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseAc 10 }
capwapBaseMacAclEntry OBJECT-TYPE
SYNTAX CapwapBaseMacAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that configures station Access Control
Lists (ACLs)."
INDEX { capwapBaseMacAclId }
::= { capwapBaseMacAclTable 1 }
CapwapBaseMacAclEntry ::= SEQUENCE {
capwapBaseMacAclId Unsigned32,
capwapBaseMacAclStationId CapwapBaseStationIdTC,
capwapBaseMacAclRowStatus RowStatus
}
capwapBaseMacAclId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents the unique identifier of an ACL."
::= { capwapBaseMacAclEntry 1 }
capwapBaseMacAclStationId OBJECT-TYPE
SYNTAX CapwapBaseStationIdTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the MAC address of a station to which WTPs will
no longer provides service."
REFERENCE
"Section 4.6.7 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseMacAclEntry 2 }
capwapBaseMacAclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create, modify, and/or delete a row
in this table.
The value of capwapBaseMacAclStationId can be changed when
this object is in state 'active' or in 'notInService'.
The capwapBaseMacAclRowStatus may be changed to 'active'
if all the managed objects in the conceptual row with
MAX-ACCESS read-create have been assigned valid values."
::= { capwapBaseMacAclEntry 3 }
-- End of capwapBaseMacAclTable table
-- End of AC Objects Group
-- WTP Objects Group
capwapBaseWtps OBJECT IDENTIFIER
::= { capwapBaseObjects 2 }
-- capwapBaseWtpProfileTable Table
capwapBaseWtpProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CapwapBaseWtpProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that configure WTP profiles for WTPs to
be managed before they connect to the AC.
An operator could change a WTP's configuration by changing
the values of parameters in the corresponding WTP profile,
then the WTP could get the new configuration through the
CAPWAP control channel.
Values of all read-create objects in this table are
persistent at restart/reboot."
::= { capwapBaseWtps 1 }
capwapBaseWtpProfileEntry OBJECT-TYPE
SYNTAX CapwapBaseWtpProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that configures and displays a WTP profile."
INDEX { capwapBaseWtpProfileId }
::= { capwapBaseWtpProfileTable 1 }
CapwapBaseWtpProfileEntry ::= SEQUENCE {
capwapBaseWtpProfileId CapwapBaseWtpProfileIdTC,
capwapBaseWtpProfileName SnmpAdminString,
capwapBaseWtpProfileWtpMacAddress CapwapBaseWtpIdTC,
capwapBaseWtpProfileWtpModelNumber SnmpAdminString,
capwapBaseWtpProfileWtpName LongUtf8String,
capwapBaseWtpProfileWtpLocation LongUtf8String,
capwapBaseWtpProfileWtpStaticIpEnable TruthValue,
capwapBaseWtpProfileWtpStaticIpType InetAddressType,
capwapBaseWtpProfileWtpStaticIpAddress InetAddress,
capwapBaseWtpProfileWtpNetmask InetAddress,
capwapBaseWtpProfileWtpGateway InetAddress,
capwapBaseWtpProfileWtpFallbackEnable INTEGER,
capwapBaseWtpProfileWtpEchoInterval Unsigned32,
capwapBaseWtpProfileWtpIdleTimeout Unsigned32,
capwapBaseWtpProfileWtpMaxDiscoveryInterval Unsigned32,
capwapBaseWtpProfileWtpReportInterval Unsigned32,
capwapBaseWtpProfileWtpStatisticsTimer Unsigned32,
capwapBaseWtpProfileWtpEcnSupport INTEGER,
capwapBaseWtpProfileRowStatus RowStatus
}
capwapBaseWtpProfileId OBJECT-TYPE
SYNTAX CapwapBaseWtpProfileIdTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents the unique identifier of a WTP profile."
::= { capwapBaseWtpProfileEntry 1 }
capwapBaseWtpProfileName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the name of a WTP profile."
::= { capwapBaseWtpProfileEntry 2 }
capwapBaseWtpProfileWtpMacAddress OBJECT-TYPE
SYNTAX CapwapBaseWtpIdTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the Base MAC address of a WTP.
A WTP profile MUST contain the Base MAC address of the WTP
because the CAPWAP message received from the WTP contains
its Base MAC address and the AC uses the Base MAC address to
find the corresponding WTP profile.
Section 4.6.40 of [RFC5415] omits indicating that the WTP's
Base MAC address must be included in the WTP Board Data
message element. This is a known errata item and should be
fixed in any future revision of the RFC 5415."
REFERENCE
"Section 4.6.40 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 3 }
capwapBaseWtpProfileWtpModelNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the model number of a WTP.
A WTP profile MUST include the WTP's model number, which
reflects the number of Physical Layer (PHY) radios on the WTP.
In this way, the creation of a WTP profile triggers the AC
to automatically create the same number of WTP Virtual Radio
Interfaces corresponding to the WTP's PHY radios without
manual intervention. With the ifIndexes of WTP Virtual
Radio Interfaces, the operator could configure and manage
the WTP's PHY radios through the wireless binding MIB
modules."
REFERENCE
"Section 4.6.40 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 4 }
capwapBaseWtpProfileWtpName OBJECT-TYPE
SYNTAX LongUtf8String (SIZE(1..512))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the name of the WTP."
REFERENCE
"Section 4.6.45 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 5 }
capwapBaseWtpProfileWtpLocation OBJECT-TYPE
SYNTAX LongUtf8String (SIZE(1..1024))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the location of the WTP."
REFERENCE
"Section 4.6.30 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 6 }
capwapBaseWtpProfileWtpStaticIpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents whether the WTP SHOULD use a static IP address
or not. A value of false disables the static IP address,
while a value of true enables it."
REFERENCE
"Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 7 }
capwapBaseWtpProfileWtpStaticIpType OBJECT-TYPE
SYNTAX InetAddressType {ipv4(1)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the static IP address type used by the WTP.
Only ipv4(1) is supported by the object.
Although the CAPWAP protocol [RFC5415] supports both IPv4
and IPv6, note that the CAPWAP field modeled by this
object does not support IPv6, so the object does not
support ipv6(2)."
REFERENCE
"Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 8 }
capwapBaseWtpProfileWtpStaticIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When capwapBaseWtpProfileWtpStaticIpEnable is true,
it represents the static IP address to be assigned to the WTP.
The format of this IP address is determined by the
corresponding instance of object
capwapBaseWtpProfileWtpStaticIpType."
REFERENCE
"Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 9 }
capwapBaseWtpProfileWtpNetmask OBJECT-TYPE
SYNTAX InetAddress (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When capwapBaseWtpProfileWtpStaticIpEnable is true,
it represents the netmask to be assigned to the WTP.
The format of this netmask is determined by the
corresponding instance of object
capwapBaseWtpProfileWtpStaticIpType."
REFERENCE
"Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 10 }
capwapBaseWtpProfileWtpGateway OBJECT-TYPE
SYNTAX InetAddress (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When capwapBaseWtpProfileWtpStaticIpEnable is true,
it represents the gateway to be assigned to the WTP.
The format of this IP address is determined by the
corresponding instance of object
capwapBaseWtpProfileWtpStaticIpType."
REFERENCE
"Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 11 }
capwapBaseWtpProfileWtpFallbackEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents whether to enable or disable automatic CAPWAP
fallback in the event that a WTP detects its preferred AC
and is not currently connected to it.
The following enumerated values are supported:
enabled(1) - The fallback mode is enabled
disabled(2) - The fallback mode is disabled"
REFERENCE
"Section 4.6.42 of CAPWAP Protocol Specification, RFC 5415."
DEFVAL { enabled }
::= { capwapBaseWtpProfileEntry 12 }
capwapBaseWtpProfileWtpEchoInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the minimum time, in seconds, between sending Echo
Request messages to the AC that the WTP has joined."
REFERENCE
"Section 4.7.7 of CAPWAP Protocol Specification, RFC 5415."
DEFVAL { 30 }
::= { capwapBaseWtpProfileEntry 13 }
capwapBaseWtpProfileWtpIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the idle timeout value that the WTP SHOULD enforce
for its active stations."
REFERENCE
"Section 4.7.8 of CAPWAP Protocol Specification, RFC 5415."
DEFVAL { 300 }
::= { capwapBaseWtpProfileEntry 14 }
capwapBaseWtpProfileWtpMaxDiscoveryInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..180)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the maximum time allowed between sending Discovery
Request messages, in seconds."
REFERENCE
"Section 4.7.10 of CAPWAP Protocol Specification, RFC 5415."
DEFVAL { 20 }
::= { capwapBaseWtpProfileEntry 15 }
capwapBaseWtpProfileWtpReportInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the interval for WTP to send the Decryption Error
report."
REFERENCE
"Section 4.7.11 of CAPWAP Protocol Specification, RFC 5415."
DEFVAL { 120 }
::= { capwapBaseWtpProfileEntry 16 }
capwapBaseWtpProfileWtpStatisticsTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the interval the WTP uses between the WTP Event
Requests it transmits to the AC to communicate its statistics,
in seconds."
REFERENCE
"Section 4.7.14 of CAPWAP Protocol Specification, RFC 5415."
DEFVAL { 120 }
::= { capwapBaseWtpProfileEntry 17 }
capwapBaseWtpProfileWtpEcnSupport OBJECT-TYPE
SYNTAX INTEGER {
limited(0),
fullAndLimited(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the support for the Explicit Congestion Notification
(ECN) bits, as defined in [RFC3168].
The following enumerated values are supported:
limited(0) - Limited ECN support
fullAndLimited(1) - Full and limited ECN support
Note that the CAPWAP field [RFC5415] modeled by this
object takes zero as starting value; this MIB object follows
that rule."
REFERENCE
"Section 4.6.25 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpProfileEntry 18 }
capwapBaseWtpProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create, modify, and/or delete a row
in this table.
The value of capwapBaseWtpProfileName,
capwapBaseWtpProfileWtpName and capwapBaseWtpProfileWtpLocation
can be changed when this object is in state 'active' or in
'notInService'.
The other objects in a row can be modified only when the value
of this object in the corresponding conceptual row is not
'active'. Thus, to modify one or more of the objects in
this conceptual row:
a. change the row status to 'notInService'
b. change the values of the row
c. change the row status to 'active'
The capwapBaseWtpProfileRowStatus may be changed to 'active'
if the managed objects capwapBaseWtpProfileName,
capwapBaseWtpProfileWtpMacAddress,
capwapBaseWtpProfileWtpModelNumber,
capwapBaseWtpProfileWtpName, and
capwapBaseWtpProfileWtpLocation in the conceptual row
have been assigned valid values.
Deleting a WTP profile in use will disconnect the WTP from
the AC. So the network management system SHOULD
ask the operator to confirm such an operation.
When a WTP profile entry is removed from the table,
the corresponding WTP Virtual Radio Interfaces are also
removed from the capwapBaseWirelessBindingTable and
ifTable [RFC2863].
Also, the related object instances SHOULD be removed from
the wireless binding MIB modules such as the IEEE 802.11
MIB module [IEEE.802-11.2007]."
::= { capwapBaseWtpProfileEntry 19 }
-- End of capwapBaseWtpProfileTable table
-- capwapBaseWtpStateTable table
capwapBaseWtpStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CapwapBaseWtpStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that indicate the AC's CAPWAP FSM state
for each WTP, and helps the operator to query a WTP's
current configuration."
::= { capwapBaseWtps 2 }
capwapBaseWtpStateEntry OBJECT-TYPE
SYNTAX CapwapBaseWtpStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that displays the AC's CAPWAP FSM state
for each WTP.
Also, the operator could query the current configuration
of a WTP by using the identifier of the corresponding
WTP profile."
INDEX { capwapBaseWtpStateWtpId }
::= { capwapBaseWtpStateTable 1 }
CapwapBaseWtpStateEntry ::= SEQUENCE {
capwapBaseWtpStateWtpId CapwapBaseWtpIdTC,
capwapBaseWtpStateWtpIpAddressType InetAddressType,
capwapBaseWtpStateWtpIpAddress InetAddress,
capwapBaseWtpStateWtpLocalIpAddressType InetAddressType,
capwapBaseWtpStateWtpLocalIpAddress InetAddress,
capwapBaseWtpStateWtpBaseMacAddress PhysAddress,
capwapBaseWtpState INTEGER,
capwapBaseWtpStateWtpUpTime TimeTicks,
capwapBaseWtpStateWtpCurrWtpProfileId CapwapBaseWtpProfileIdTC
}
capwapBaseWtpStateWtpId OBJECT-TYPE
SYNTAX CapwapBaseWtpIdTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents the unique identifier of a WTP."
::= { capwapBaseWtpStateEntry 1 }
capwapBaseWtpStateWtpIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the IP address type of a WTP.
Only ipv4(1) and ipv6(2) are supported by the object."
::= { capwapBaseWtpStateEntry 2 }
capwapBaseWtpStateWtpIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the IP address of a WTP that corresponds to
the IP address in the IP packet header.
The format of this IP address is determined by
the corresponding instance of object
capwapBaseWtpStateWtpIpAddressType."
REFERENCE
"Section 4 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpStateEntry 3 }
capwapBaseWtpStateWtpLocalIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the local IP address type of a WTP.
Only ipv4(1) and ipv6(2) are supported by the object."
::= { capwapBaseWtpStateEntry 4 }
capwapBaseWtpStateWtpLocalIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the local IP address of a WTP and models the
CAPWAP Local IPv4 Address or CAPWAP Local IPv6 Address fields
[RFC5415].
If a Network Address Translation (NAT) device is present
between WTP and AC, the value of
capwapBaseWtpStateWtpLocalIpAddress will be different from the
value of capwapBaseWtpStateWtpIpAddress.
The format of this IP address is determined by
the corresponding instance of object
capwapBaseWtpStateWtpLocalIpAddressType."
REFERENCE
"Sections 4.6.11 and 4.6.12 of CAPWAP Protocol Specification,
RFC 5415."
::= { capwapBaseWtpStateEntry 5 }
capwapBaseWtpStateWtpBaseMacAddress OBJECT-TYPE
SYNTAX PhysAddress (SIZE(6|8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the WTP's Base MAC Address, which MAY be
assigned to the primary Ethernet interface.
The instance of the object corresponds to the Base MAC Address
sub-element in the CAPWAP protocol [RFC5415]."
REFERENCE
"Section 4.6.40 of CAPWAP Protocol Specification, RFC 5415."
::= { capwapBaseWtpStateEntry 6 }
(next page on part 3)