Tech-invite3GPPspaceIETFspace
959493929190898887868584838281807978777675747372717069686766656463626160595857565554535251504948474645444342414039383736353433323130292827262524232221201918171615141312111009080706050403020100
in Index   Prev   Next

RFC 3381

Internet Printing Protocol (IPP): Job Progress Attributes

Pages: 17
Obsoleted by:  8011
Updates:  2910

ToP   noToC   RFC3381 - Page 1
Network Working Group                                        T. Hastings
Request for Comments: 3381                             Xerox Corporation
Updates: 2910                                                   H. Lewis
Category: Standards Track                           IBM Printing Company
                                                              R. Bergman
                                          Hitachi Koki Imaging Solutions
                                                          September 2002


                   Internet Printing Protocol (IPP):
                        Job Progress Attributes

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

Abstract

This document defines four new Job Description attributes for monitoring job progress to be registered as OPTIONAL extensions to the Internet Printing Protocol (IPP/1.0 and IPP/1.1). These attributes are drawn from the PWG Job Monitoring MIB. This document also defines a new "sheet-collate" Job Template attribute to control sheet collation and to help with the interpretation of the job progress attributes.
ToP   noToC   RFC3381 - Page 2

Table of Contents

1 Introduction.....................................................2 2 Terminology......................................................2 2.1 Conformance Terminology........................................4 2.2 Other terminology..............................................4 3 Job Template attributes..........................................4 3.1 sheet-collate (type2 keyword)..................................4 4 IPP Job Description attributes for monitoring Job Progress.......6 4.1 job-collation-type (type2 enum)................................9 4.2 sheet-completed-copy-number (integer(0:MAX))..................11 4.3 sheet-completed-document-number (integer(0:MAX))..............11 4.4 impressions-completed-current-copy (integer(0:MAX))...........11 5 Conformance Requirements........................................11 6 IANA Considerations.............................................12 6.1 Attributes....................................................12 6.2 Keyword Attribute Values......................................12 6.3 Enum Attribute Values.........................................12 7 Internationalization Considerations.............................12 8 Security Considerations.........................................12 9 References......................................................12 10 Description of the Base IPP Documents..........................13 11 Authors' Addresses.............................................15 12 Full Copyright Statement.......................................16

1 Introduction

This document defines four new Job Description attributes for monitoring job progress to be registered as OPTIONAL extensions to IPP/1.0 [RFC2566] and IPP/1.1 [RFC2911]. These attributes are drawn from the PWG Job Monitoring MIB [RFC2707]. See section 10 for a description of the base IPP documents. The new Job Description attributes are: "job-collation-type" (type2 enum) "sheet-completed-copy-number" (integer(0:MAX)) "sheet-completed-document-number" (integer(0:MAX)) "impressions-completed-current-copy" (integer(0:MAX)) This document also defines a new "sheet-collate" Job Template attribute to control sheet collation and to help with the interpretation of the job progress attributes. These new attributes may also be used by themselves in combination with the IPP/1.1 "job- impressions-completed" attribute, as useful job progress monitoring attributes and/or may be passed in an IPP Notification (see [ipp- ntfy]).
ToP   noToC   RFC3381 - Page 3

2 Terminology

This section defines terminology used throughout this document.

2.1 Conformance Terminology

Capitalized terms, such as MUST, MUST NOT, REQUIRED, SHOULD, SHOULD NOT, MAY, NEED NOT, and OPTIONAL, have special meaning relating to conformance, as defined in RFC 2119 [RFC2119] and [RFC2911] section 12.1. If an implementation supports the extension defined in this document, then these terms apply; otherwise, they do not. These terms define conformance to this document only; they do not affect conformance to other documents, unless explicitly stated otherwise.

2.2 Other terminology

This document uses terms such as Job object (or Job), IPP Printer object (or Printer), "operation", "attribute", "keyword", "support", and "impression". These terms have special meaning and are defined in the model terminology [RFC2911], section 12.2.

3 Job Template attributes

3.1 sheet-collate (type2 keyword)

+===================+======================+=====================+ | Job Attribute |Printer: Default Value| Printer: Supported | | | Attribute | Values Attribute | +===================+======================+=====================+ | sheet-collate | sheet-collate-default| sheet-collate- | | (type2 keyword) | (type2 keyword) | supported (1setOf | | | | type2 keyword) | +-------------------+----------------------+---------------------+ This attribute specifies whether or not the media sheets of each copy of each printed document in a job are to be in sequence, when multiple copies of the document are specified by the 'copies' attribute. Standard keyword values are: 'uncollated': each print-stream sheet is printed a number of times in succession equal to the value of the 'copies' attribute, followed by the next print-stream sheet. 'collated': each copy of each document is printed with the print-stream sheets in sequence, followed by the next document copy.
ToP   noToC   RFC3381 - Page 4
   For example, suppose a document produces two media sheets as output,
   and "copies" is equal to '6'.  For the 'uncollated' case, six copies
   of the first media sheet are printed, followed by six copies of the
   second media sheet.  For the 'collated' case, one copy of each of the
   six sheets is printed, followed by another copy of each of the six
   media sheets.

   Whether the effect of sheet collation is achieved by placing copies
   of a document in multiple output bins, or in the same output bin with
   implementation defined document separation, is implementation
   dependent.  Also whether it is achieved by making multiple passes
   over the job or by using an output sorter, is implementation
   dependent.

   Note: IPP/1.0 [RFC2566] and IPP/1.1 [RFC2911] are silent on whether
   or not sheets within documents are collated.  The "sheet-collate-
   supported" Printer attribute permits a Printer object to indicate
   whether or not it collates sheets with each document and whether it
   allows the client to control sheet collation.  An implementation is
   able to indicate that it supports uncollated sheets, collated sheets,
   or both, using the 'uncollated', 'collated', or both 'uncollated' and
   'collated' values, respectively.

   This attribute is affected by "multiple-document-handling".  The
   "multiple-document-handling" attribute describes the collation of
   documents, and the "sheet-collate" attribute describes the semantics
   of collating individual pages within a document.  To better explain
   the interaction between these two attributes, the term "set" is
   introduced.  A "set" is a logical boundary between the delivered
   media sheets of a printed job.  For example, in the case of a ten
   page single document with collated pages and a request for 50 copies,
   each of the 50 printed copies of the document constitutes a "set".
   In the above example if the pages were uncollated, then 50 copies of
   each of the individual pages within the document would represent each
   "set".
ToP   noToC   RFC3381 - Page 5
   The following table describes the interaction of "sheet-collate" with
   multiple document handling.

      "sheet-        "multiple-       Semantics
      collate"       document-
                     handling"

      'collated'     'single-         Each copy of the concatenated
                     document'        documents, with their pages in
                                      sequence, represents a "set".

      'collated'     'single-         Each copy of the concatenated
                     document-new-    documents, with their pages in
                     sheet'           sequence, represents a "set".

      'collated'     'separate-       Each copy of each separate
                     documents-       document, with its pages in
                     collated-        sequence, represents a "set".
                     copies'

      'collated'     'separate-       Each copy of each separate
                     documents-       document, with its pages in
                     uncollated-      sequence, represents a "set".
                     copies

      'uncollated'   'single-         Each media sheet of the document
                     document'        is printed a number of times equal
                                      to the "copies" attribute; which
                                      constitutes a "set".

      'uncollated'   'single-         Each media sheet of the
                     document-new-    concatenated documents is printed
                     sheet'           a number of times equal to the
                                      "copies" attribute; which
                                      constitutes a "set".

      'uncollated'   'separate-       This is a degenerate case, and the
                     documents-       printer object MUST reject the job
                     collated-        and return the status, "client-
                     copies'          error-conflicting-attributes".

      'uncollated'   'separate-       This is a degenerate case, and the
                     documents-       printer object MUST reject the job
                     uncollated-      and return the status "client-
                     copies           error-conflicting-attributes".
ToP   noToC   RFC3381 - Page 6
      From the above table it is obvious that the implicit value of the
      "sheet-collate" attribute in a printer that does not support the
      "sheet-collate" attribute, is 'collated.'  The semantics of
      "multiple-document-handling" are otherwise nonsensical in the case
      of separate documents.

4 IPP Job Description attributes for monitoring Job Progress

The following IPP Job Description attributes are proposed to be added to IPP through the type2 registration procedures. They are useful for monitoring the progress of a job. They are also used as attributes in the notification content in a notification report [ipp-ntfy]. There are a number of Job Description attributes for monitoring the progress of a job. These objects and attributes count the number of K octets, impressions, sheets, and pages requested or completed. For impressions and sheets, "completed" means stacked, unless the implementation is unable to detect when each sheet is stacked, in which case, stacked is approximated when the processing of each sheet is completed. There are objects and attributes for the overall job and for the current copy of the document currently being stacked. For the latter, the rate at which the various objects and attributes count, depends on the sheet and document collation of the job. Consider the following four Job Description attributes that are used to monitor the progress of a job's impressions: 1. "job-impressions-completed" - counts the total number of impressions stacked for the job (see [RFC2911] section 4.3.18.2). 2. "impressions-completed-current-copy" - counts the number of impressions stacked for the current document copy. 3. "sheet-completed-copy-number" - identifies the number of the copy for the current document being stacked, where the first copy is 1. 4. "sheet-completed-document-number" - identifies the current document within the job that is being stacked, where the first document in a job is 1. NOTE: this attribute SHOULD NOT be implemented for implementations that only support one document per job.
ToP   noToC   RFC3381 - Page 7
   For each of the three types of job collation, a job with three copies
   of two documents (1, 2), where each document consists of 3
   impressions, the four variables have the following values, as each
   sheet is stacked for one-sided printing:

   "job-collation-type" = 'uncollated-sheets(3)'

   "job-            "impressions-     "sheet-         "sheet-
   impressions-     completed-        completed-      completed-
   completed"       current-copy"     copy-number"    document-
                                                      number"

        0                0                0               0
        1                1                1               1
        2                1                2               1
        3                1                3               1
        4                2                1               1
        5                2                2               1
        6                2                3               1
        7                3                1               1
        8                3                2               1
        9                3                3               1
       10                1                1               2
       11                1                2               2
       12                1                3               2
       13                2                1               2
       14                2                2               2
       15                2                3               2
       16                3                1               2
       17                3                2               2
       18                3                3               2
ToP   noToC   RFC3381 - Page 8
   "job-collation-type" = 'collated-documents(4)'

   "job-            "impressions-     "sheet-         "sheet-
   impressions-     completed-        completed-      completed-
   completed"       current-copy"     copy-           document-
                                      number"         number"

        0                0                0               0
        1                1                1               1
        2                2                1               1
        3                3                1               1
        4                1                1               2
        5                2                1               2
        6                3                1               2
        7                1                2               1
        8                2                2               1
        9                3                2               1
       10                1                2               2
       11                2                2               2
       12                3                2               2
       13                1                3               1
       14                2                3               1
       15                3                3               1
       16                1                3               2
       17                2                3               2
       18                3                3               2
ToP   noToC   RFC3381 - Page 9
   "job-collation-type" = 'uncollated-documents(5)'

   "job-            "impressions-     "sheet-         "sheet-
   impressions-     completed-        completed-      completed-
   completed"       current-copy"     copy-t          document-
                                      number"         number"

        0                0                0               0
        1                1                1               1
        2                2                1               1
        3                3                1               1
        4                1                2               1
        5                2                2               1
        6                3                2               1
        7                1                3               1
        8                2                3               1
        9                3                3               1
       10                1                1               2
       11                2                1               2
       12                3                1               2
       13                1                2               2
       14                2                2               2
       15                3                2               2
       16                1                3               2
       17                2                3               2
       18                3                3               2

4.1 job-collation-type (type2 enum)

Job Collation includes sheet collation and document collation. Sheet collation is defined to be the ordering of sheets within a document copy. Document collation is defined to be the ordering of document copies within a multi-document job. The value of the "job- collation-type" is affected by the value of the "sheet-collate" Job Template attribute (see section 3.1), if supplied and supported. The Standard enum values are: '1' 'other': not one of the defined values '2' 'unknown': the collation type is unknown '3' 'uncollated-sheets': No collation of the sheets within each document copy, i.e., each sheet of a document that is to produce multiple copies, is replicated before the next sheet in the document is processed and stacked. If the device has an output bin collator, the 'uncollated-sheets(3)' value may actually
ToP   noToC   RFC3381 - Page 10
                    produce collated sheets as far as the user is
                    concerned (in the output bins).  However, when the
                    job collation is the 'uncollated-sheets(3)' value,
                    job progress is indistinguishable from a monitoring
                    application between a device that has an output bin
                    collator and one that does not.

      '4' 'collated-documents':  Collation of the sheets within each
                    document copy is performed within the printing
                    device by making multiple passes over, either the
                    source or an intermediate representation of the
                    document.  In addition, when there are multiple
                    documents per job, the i'th copy of each document is
                    stacked before the j'th copy of each document, i.e.,
                    the documents are collated within each job copy.
                    For example, if a job is submitted with documents, A
                    and B, the job is made available to the end user as:
                    A, B, A, B, ....  The 'collated-documents(4)' value
                    corresponds to the IPP [RFC2911] 'separate-
                    documents-collated-copies' keyword value of the
                    "multiple-document-handling" attribute.

                    If the job's "copies" attribute is '1' (or not
                    supplied), then the "job-collation-type" attribute
                    is defined to be '4'.

      '5' 'uncollated-documents':  Collation of the sheets within each
                    document copy is performed within the printing
                    device by making multiple passes over either the
                    source or an intermediate representation of the
                    document.  In addition, when there are multiple
                    documents per job, all copies of the first document
                    in the job are stacked before any copied of the next
                    document in the job, i.e., the documents are
                    uncollated within the job.  For example, if a job is
                    submitted with documents, A and B, the job is made
                    available to the end user as:  A, A, ..., B, B, ....
                    The 'uncollated-documents(5)' value corresponds to
                    the IPP [RFC2911] 'separate-documents-uncollated-
                    copies' keyword value of the "multiple-document-
                    handling" attribute.
ToP   noToC   RFC3381 - Page 11

4.2 sheet-completed-copy-number (integer(0:MAX))

The number of the copy being stacked for the current document. This number starts at 0, is set to 1 when the first sheet of the first copy for each document is being stacked and is equal to n where n is the nth sheet stacked in the current document copy. If the value is unknown, the Printer MUST return the 'unknown' out-of-band value (see [RFC2911] section 4.1), rather than the -2 value used in some MIBs [RFC2707].

4.3 sheet-completed-document-number (integer(0:MAX))

The ordinal number of the document in the job that is currently being stacked. This number starts at 0, increments to 1 when the first sheet of the first document in the job is being stacked, and is equal to n where n is the nth document in the job, starting with 1. If the value is unknown, the Printer MUST return the 'unknown' out-of-band value (see [RFC2911] section 4.1), rather than the -2 value used in some MIBs [RFC2707]. Implementations that only support one document job SHOULD NOT implement this attribute.

4.4 impressions-completed-current-copy (integer(0:MAX))

The number of impressions completed by the device for the current copy of the current document so far. For printing, the impressions completed includes interpreting, marking, and stacking the output. For other types of job services, the number of impressions completed includes the number of impressions processed. If the value is unknown, the Printer MUST return the 'unknown' out-of-band value (see [RFC2911] section 4.1), rather than the -2 value used in some MIBs [RFC2707]. This value MUST be reset to 0 for each document in the job and for each document copy.

5 Conformance Requirements

This section summarizes the Conformance Requirements detailed in the definitions in this document. In general each of the attributes defined in this document are OPTIONAL for a client and/or a Printer to support, so that client and Printer implementers MAY implement any combination of these attributes.
ToP   noToC   RFC3381 - Page 12

6 IANA Considerations

This section contains registration information for IANA to add to the IPP Registry according to the procedures defined in RFC 2911 [RFC2911], section 6. The resulting registrations will be published in the http://www.iana.org/assignments/ipp-registrations registry.

6.1 Attributes

Job Template attributes: Ref. Section: sheet-collate (type2 keyword) RFC 3381 3.1 sheet-default (type2 keyword) RFC 3381 3.1 sheet-supported (1setOf type2 keyword) RFC 3381 3.1 Job Description attributes: Ref. Section: job-collation-type (type2 enum) RFC 3381 4.1 sheet-completed-copy-number (integer(0:MAX)) RFC 3381 4.2 sheet-completed-document-number (integer(0:MAX))RFC 3381 4.3 impressions-completed-current-copy (integer(0:MAX)) RFC 3381 4.4

6.2 Keyword Attribute Values

The following table provides registration information for all of the attributes defined in this document that have keyword values. These keywords are to be registered according to the procedures defined in RFC 2911 [RFC2911] section 6.1. sheet-collate (type2 keyword) RFC 3381 3.1 'uncollated' RFC 3381 3.1 'collated' RFC 3381 3.1 sheet-collate-default (type2 keyword) RFC 3381 3.1 See "sheet-collate" attribute sheet-collate-supported (1setOf type2 keyword) RFC 3381 3.1 See "sheet-collate" attribute

6.3 Enum Attribute Values

The following table provides registration information for all of the attributes defined in this document that have enum values. These enums are to be registered according to the procedures defined in RFC 2911 [RFC2911] section 6.1. job-collation-type (type2 enum) RFC 3381 4.1 '1' 'other' RFC 3381 4.1 '2' 'unknown' RFC 3381 4.1 '3' 'uncollated-sheets' RFC 3381 4.1 '4' 'collated-documents' RFC 3381 4.1 '5' 'uncollated-documents' RFC 3381 4.1
ToP   noToC   RFC3381 - Page 13

7 Internationalization Considerations

The IPP extensions defined in this document require the same internationalization considerations as any of the Job Template and Job Description attributes defined in IPP/1.1 [RFC2911].

8 Security Considerations

The IPP extensions defined in this document require the same security considerations as any of the Job Template attributes and Job Description attributes defined in IPP/1.1 [RFC2911].

9 References

9.1 Normative References

[RFC2910] Herriot, R., Butler, S., Moore, P. and R. Turner, "Internet Printing Protocol/1.1: Encoding and Transport", RFC 2910, September 2000. [RFC2911] Hastings, T., Herriot, R., deBry, R., Isaacson, S. and P. Powell, "Internet Printing Protocol/1.1: Model and Semantics", RFC 2911, September 2000.

9.2 Informative References

[RFC2565] Herriot, R., Butler, S., Moore, P. and R. Turner, "Internet Printing Protocol/1.0: Encoding and Transport", RFC 2565, April 1999. [RFC2566] deBry, R., Hastings, T., Herriot, R., Isaacson, S. and P. Powell, "Internet Printing Protocol/1.0: Model and Semantics", RFC 2566, April 1999. [RFC2567] Wright, F.D., "Design Goals for an Internet Printing Protocol", RFC 2567, April 1999. [RFC2568] Zilles, S., "Rationale for the Structure and Model and Protocol for the Internet Printing Protocol", RFC 2568, April 1999. [RFC2569] Herriot, R., Hastings, T., Jacobs, N. and J. Martin, "Mapping between LPD and IPP Protocols", RFC 2569, April 1999. [RFC2707] Bergman, R., Hastings, T., Isaacson, S. and H. Lewis, "PWG Job Monitoring MIB - V1", RFC 2707, November 1999.
ToP   noToC   RFC3381 - Page 14
   [RFC3196]  Hastings, T., Manros, C., Zehler, P., Kugler, C. and H.
              Holst, "Internet Printing Protocol/1.1: Implementor's
              Guide", RFC 3196, November 2001.

   [ipp-ntfy] Herriot, R., Hastings, T., et. al., "Internet Printing
              Protocol (IPP): Event Notification and Subscriptions",
              Work in Progress.

10 Description of the Base IPP Documents

The base set of IPP documents includes: Design Goals for an Internet Printing Protocol [RFC2567] Rationale for the Structure and Model and Protocol for the Internet Printing Protocol [RFC2568] Internet Printing Protocol/1.1: Model and Semantics [RFC2911] Internet Printing Protocol/1.1: Encoding and Transport [RFC2910] Internet Printing Protocol/1.1: Implementer's Guide [RFC3196] Mapping between LPD and IPP Protocols [RFC2569] The "Design Goals for an Internet Printing Protocol" document takes a broad look at distributed printing functionality, and enumerates real-life scenarios that help to clarify the features that need to be included in a printing protocol for the Internet. It identifies requirements for three types of users: end users, operators, and administrators. It calls out a subset of end user requirements that are satisfied in IPP/1.0 [RFC2566, RFC2565]. A few OPTIONAL operator operations have been added to IPP/1.1 [RFC2911, RFC2910]. The "Rationale for the Structure and Model and Protocol for the Internet Printing Protocol" document describes IPP from a high level view, defines a roadmap for the various documents that form the suite of IPP specification documents, and gives background and rationale for the IETF IPP working group's major decisions. The "Internet Printing Protocol/1.1: Model and Semantics" document describes a simplified model with abstract objects, their attributes, and their operations. The model introduces a Printer and a Job. The Job supports multiple documents per Job. The model document also addresses how security, internationalization, and directory issues are addressed. The "Internet Printing Protocol/1.1: Encoding and Transport" document is a formal mapping of the abstract operations and attributes defined in the model document onto HTTP/1.1 [RFC2616]. It also defines the encoding rules for a new Internet MIME media type called "application/ipp". This document also defines the rules for transporting over HTTP a message body whose Content-Type is
ToP   noToC   RFC3381 - Page 15
   "application/ipp".  This document defines the 'ipp' scheme for
   identifying IPP printers and jobs.

   The "Internet Printing Protocol/1.1: Implementer's Guide" document
   gives insight and advice to implementers of IPP clients and IPP
   objects.  It is intended to help them understand IPP/1.1 and some of
   the considerations that may assist them in the design of their client
   and/or IPP object implementations.  For example, a typical order of
   processing requests is given, including error checking.  Motivation
   for some of the specification decisions is also included.

   The "Mapping between LPD and IPP Protocols" document gives some
   advice to implementers of gateways between IPP and LPD (Line Printer
   Daemon) implementations.

   In addition to the base IPP documents, the "Event Notification
   Specification" document [ipp-ntfy] defines OPTIONAL operations that
   allow a client to subscribe to printing related events.
   Subscriptions include "Per-Job subscriptions" and "Per-Printer
   subscriptions".  Subscriptions are modeled as Subscription objects.
   Four other operations are defined for subscription objects:  get
   attributes, get subscriptions, renew a subscription, and cancel a
   subscription.
ToP   noToC   RFC3381 - Page 16

11 Authors' Addresses

Tom Hastings Xerox Corporation 737 Hawaii St. ESAE 231 El Segundo, CA 90245 Phone: 310-333-6413 Fax: 310-333-5514 EMail: hastings@cp10.es.xerox.com Harry Lewis IBM 6300 Diagonal Hwy Boulder, CO 80301-9191 Phone: (303) 924-5337 EMail: harryl@us.ibm.com Ron Bergman (Editor) Hitachi Koki Imaging Solutions 1757 Tapo Canyon Road Simi Valley, CA 93063-3394 Phone: 805-578-4421 Fax: 805-578-4001 EMail: rbergma@hitachi-hkis.com IPP Web Page: http://www.pwg.org/ipp/ IPP Mailing List: ipp@pwg.org To subscribe to the ipp mailing list, send the following email: 1) send it to majordomo@pwg.org 2) leave the subject line blank 3) put the following two lines in the message body: subscribe ipp end Implementers of this specification document are encouraged to join the IPP Mailing List in order to participate in any discussions of clarification issues and review of registration proposals for additional attributes and values. In order to reduce spam, the mailing list rejects mail from non-subscribers, so you must subscribe to the mailing list in order to send a question or comment to the mailing list.
ToP   noToC   RFC3381 - Page 17

12 Full Copyright Statement

Copyright (C) The Internet Society (2002). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.