Content for TR 37.843 Word version: 15.7.0
6 Radiated receiver characteristics
7 Performance requirements
8 EMC requirements
9 Manufacturer declarations
10 Conformance testing aspects
B OTA sensitivity measurement error contribution descriptions
C Beam sweeping
D Sparse sampling for spurious emissions
E Radiated transmit measurement error contribution descriptions
F Test equipment uncertainty values
G Power density measurements close to EUT
$ Change history
6 Radiated receiver characteristics Word‑p. 48
6.1 General
6.2 Reference sensitivity level
6.2.1 Background information on the conducted requirement
6.2.2 OTA sensitivity requirements Word‑p. 50
6.3 Dynamic range Word‑p. 53
6.3.1 Background information on the conducted requirement
6.3.2 Core requirement: Receiver dynamic range
6.3.3 Conformance requirement: Receiver dynamic range
6.4 In-band selectivity and blocking
6.4.1 Background information on the conducted requirement
6.4.2 In-band selectivity and blocking: Core requirement Word‑p. 54
6.4.3 In-band selectivity and blocking: Conformance requirement Word‑p. 58
6.5 Out-of-band blocking
6.5.1 Background
6.5.2 Out-of-band blocking OTA core requirement
6.5.2.1 Interferer level
6.5.2.2 Wanted signal level and direction Word‑p. 60
6.5.2.3 Out of band region
6.5.2.4 Frequency range Word‑p. 61
6.5.3 Out-of-band blocking OTA conformance requirement
6.6 Receiver spurious emissions
6.6.1 Background information on the conducted requirement
6.6.2 Receiver spurious emissions OTA: Core requirement
6.6.3 Receiver spurious emissions OTA: Conformance requirement Word‑p. 62
6.7 Receiver intermodulation
6.7.1 Background information on the conducted requirement
6.7.2 Receiver intermodulation: Core requirement
6.7.3 Receiver intermodulation: Conformance requirement Word‑p. 63
6.8 In-channel selectivity
6.8.1 Background information on the conducted requirement
6.8.2 In-channel selectivity: Core requirement
6.8.3 In-channel selectivity: Conformance requirement
6.9 ACS and NB blocking Word‑p. 64
7 Performance requirements
7.1 General
7.2 Core requirements for OTA tests
7.3 UTRA FDD requirements
7.4 E-UTRA requirements Word‑p. 66
7.5 Propagation conditions Word‑p. 69
7.6 Conformance requirements
7.7 OTA test setup
7.8 BS demodulation requirements feasible OTA
8 EMC requirements Word‑p. 70
8.1 General
8.2 Regulatory EMC requirements Word‑p. 71
8.3 Field strength in EMC chamber
8.4 Protection of measurement equipment Word‑p. 72
8.5 EMC radiated emission requirement
8.6 Radiated Immunity
9 Manufacturer declarations
10 Conformance testing aspects Word‑p. 73
A Void
B OTA sensitivity measurement error contribution descriptions Word‑p. 75
C Beam sweeping Word‑p. 76
D Sparse sampling for spurious emissions Word‑p. 77
E Radiated transmit measurement error contribution descriptions Word‑p. 78
F Test equipment uncertainty values Word‑p. 79
G Power density measurements close to EUT Word‑p. 80
$ Change history Word‑p. 81
