Tech-
invite
3GPP
space
IETF
space
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
4‑5x
Content for
TR 36.815
Word version: 9.1.0
1…
2…
2
References
3
Definitions, symbols and abbreviations
4
Introduction
5
Radio transmission/reception and radio resource management
6
Conclusions
A
ITU Template response
$
Change history
2
References
3
Definitions, symbols and abbreviations
3.1
Definitions
3.2
Symbols
Word‑p. 7
3.3
Abbreviations
4
Introduction
5
Radio transmission/reception and radio resource management
Word‑p. 8
5.1
RF scenarios
5.1.1
Deployment scenarios for ITU-R submission
5.1.2
Deployment scenarios for Feasibility study
5.1.3
Scenario #1 (Single band contiguous allocation @3.5GHz for FDD (UL: 40MHz, DL: 80MHZ)
Word‑p. 10
5.1.4
Scenario #2 (Single band contiguous allocation @2.3GHz for TDD (100MHz)
Word‑p. 12
5.2
Common requirements for UE and BS
5.2.1
Operating bands
5.2.2
Component Carrier Aggregation
Word‑p. 13
5.2.2.1
Channel raster
Word‑p. 14
5.2.2.2
Channel bandwidth
5.2.2.3
Additional Transmission bandwidth configurations
Word‑p. 15
5.2.2.4
Extension Carrier
5.2.2.5
Carrier spacing between contiguously aggregated component carriers
5.3
UE RF requirements
Word‑p. 16
5.3.1
General
5.3.1.1
UE capability classes
5.3.2
Transmitter characteristics
5.3.2.1
General
5.3.2.2
Transmit power
Word‑p. 17
5.3.2.2.1
Power Class
5.3.2.2.2
MPR /A-MPR
Word‑p. 18
5.3.2.3
Output power dynamics
5.3.2.4
Transmit signal quality
5.3.2.5
Output RF spectrum emissions
5.3.2.5.1
Adjacent Channel Leakage ratio
Word‑p. 19
5.3.2.5.2
Spurious emission (UE to UE co-existence)
5.3.2.6
Transmit intermodulation
5.3.3
Receiver characteristics
5.3.3.1
General
Word‑p. 20
5.3.3.2
Receiver Sensitivity
5.3.3.2.1
MSD (Maximum sensitivity reduction)
5.3.3.3
Selectivity
5.3.3.4
Blocking performance
Word‑p. 21
5.3.3.5
Spurious response
5.3.3.6
Intermodulation performance
5.3.3.7
Spurious emission
5.4
BS RF requirements
Word‑p. 22
5.4.1
General
5.4.1.1
RF scenarios
5.4.1.2
Re-use of existing LTE Rel-8 requirements
5.4.2
Transmitter characteristics
Word‑p. 23
5.4.2.1
General
5.4.2.2
Base Station output power
5.4.2.3
Transmitted signal quality
5.4.2.4
Unwanted emissions
Word‑p. 24
5.4.2.4.1
Operating band Unwanted emissions
5.4.2.4.2
Transmitter spurious emissions
5.4.3
Receiver characteristics
Word‑p. 25
5.4.3.1
Reference sensitivity level
5.4.3.2
Dynamic range
5.4.3.3
In-channel selectivity
5.4.3.4
Adjacent Channel Selectivity (ACS), narrow-band blocking, Blocking, Receiver intermodulation
5.4.3.5
Performance requirements
Word‑p. 26
5.4.4
Implementation feasibility of carrier aggregation scenarios
5.4.4.1
Intra-band contiguous carrier aggregation
5.4.4.2
Intra-band non-contiguous carrier aggregation
Word‑p. 27
5.4.4.3
Inter-band non-contiguous carrier aggregation
5.4.4.4
Aspects related to MIMO multi-TX
5.5
TS 36.133 requirements enhancements
6
Conclusions
A
ITU Template response
Word‑p. 28
A.1
ITU Description template - characteristics template
A.2
ITU Description template - characteristics response (RAN4)
$
Change history
Word‑p. 29