Content for TS 36.307 Word version: 16.2.0
3A Release independent features
A Frequency arrangement for overlapping operating bands
B Common Requirements for bands or CA
B.1 Purpose of annex
B.2 Common RRM requirements
B.3 Common UE performance requirements
B.4 Common UE RF requirements
C Common Requirements for 4Rx
C.1 Common UE RF requirements
C.2 Common UE demodulation and CSI requirements
D Common Requirements for performance enhancements for high speed scenario
D.1 Common RRM requirements for performance enhancements for high speed scenario
D.2 Common UE demodulation requirements for performance enhancements for high speed scenario
E Common Requirements for 8Rx
E.1 Common UE RF requirements
E.2 Common UE demodulation and CSI requirements
$ Change history
3A Release independent features
3A.0 General
3A.1 Additional E-UTRA operating bands
3A.2 Additional E-UTRA CA configurations Word‑p. 8
3A.3 Additional operating bands and/or CA configurations for specific features Word‑p. 10
3A.4 Other release independent features Word‑p. 12
4_292 Void
A Frequency arrangement for overlapping operating bands Word‑p. 14
B (Normative) Common Requirements for bands or CA Word‑p. 15
B.1 Purpose of annex
B.2 Common RRM requirements
B.2.1 Common RRM requirements for a release independent band
B.2.2 Common RRM requirements for an intra-band contiguous CA configuration Word‑p. 16
B.2.3 Common RRM requirements for an intra-band non-contiguous CA with single uplink configuration Word‑p. 17
B.2.4 Common RRM requirements for an inter-band CA with single uplink configuration Word‑p. 18
B.2.5 Common RRM requirements for an inter-band CA with dual uplink configuration
B.2.6 Common RRM requirements for an intra-band non-contiguous CA with dual uplink configuration Word‑p. 19
B.2.7 Common RRM requirements for an inter-band CA with three uplink configuration Word‑p. 20
B.2.8 Common RRM requirements for operating bands for UE category NB1
B.2.9 Common RRM requirements for operating bands for UE category 0
B.2.10 Common RRM requirements for operating bands for UE category M1 Word‑p. 21
B.2.11 Common RRM requirements for operating bands for UE category M2
B.2.12 Common RRM requirements for operating bands for UE category NB2 Word‑p. 22
B.2.13 Common RRM requirements for operating bands for LTE-based V2X Communication
B.2.14 Common RRM requirements for an inter-band CA with four uplink configuration Word‑p. 23
B.2.15 Common RRM requirements for operating bands for UE category 1bis
B.3 Common UE performance requirements Word‑p. 24
B.3.1 Void
B.3.2 Common UE performance requirements and tests for different CA configurations and combination sets
B.3.3 Void
B.3.4 Void
B.3.5 Common UE performance requirements and tests for operating bands for UE category 0 Word‑p. 25
B.3.6 Common UE performance requirements and tests for operating bands for UE category M1 Word‑p. 26
B.3.7 Common UE performance requirements and tests for operating bands for UE category NB1 and NB2
B.3.8 Common UE performance requirements and tests for operating bands for UE category 1bis
B.4 Common UE RF requirements
B.4.1 Common UE RF requirements for a release independent band
B.4.2 Common UE RF requirements for an intra-band contiguous CA configuration Word‑p. 27
B.4.3 Common UE RF requirements for an single uplink inter-band CA configuration Word‑p. 28
B.4.4 Common UE RF requirements for an inter-band CA configuration including an operating band without uplink band Word‑p. 29
B.4.5 Common UE RF requirements for a single uplink intra-band non-contiguous CA configuration
B.4.6 Common UE RF requirements for dual uplink inter-band CA configuration Word‑p. 30
B.4.7 Common UE RF requirements for dual uplink intra-band non-contiguous CA configuration
B.4.8 Common UE RF requirements for three uplink inter-band CA configuration Word‑p. 31
B.4.9 Common UE RF requirements for operating bands for UE category NB1 and NB2 Word‑p. 32
B.4.10 Common UE RF requirements for operating bands for UE category 0
B.4.11 Common UE RF requirements for operating bands for UE category M1 and M2
B.4.12 Common UE RF requirements for operating bands for LTE-based V2X operation Word‑p. 33
B.4.13 Common UE RF requirements for four uplink inter-band CA configuration Word‑p. 34
B.4.14 Common UE RF requirements for operating bands for UE category 1bis Word‑p. 35
C (Normative) Common Requirements for 4Rx Word‑p. 36
D (Normative) Common Requirements for performance enhancements for high speed scenario Word‑p. 38
D.1 Common RRM requirements for performance enhancements for high speed scenario
D.2 Common UE demodulation requirements for performance enhancements for high speed scenario
E (Normative) Common Requirements for 8Rx Word‑p. 39
$ Change history Word‑p. 40
