Content for TS 36.304 Word version: 16.3.0
5 Process and procedure descriptions
5.1 PLMN selection
5.2 Cell selection and reselection
5.2.1 Introduction
5.2.2 States and state transitions in Idle Mode
5.2.3 Cell Selection process
5.2.4 Cell Reselection evaluation process
5.2.6 Camped Normally state
5.2.7 Cell Selection at transition to RRC_IDLE or RRC_INACTIVE state
5.2.7a Cell Selection at transition to RRC_IDLE state for NB-IoT
5.2.8 Any Cell Selection state
5.2.8a Any Cell Selection state for NB-IoT
5.2.9 Camped on Any Cell state
5.3 Cell Reservations and Access Restrictions
5.3.1 Cell status and cell reservations
5.3.2 Access control
5.3.3 Emergency call
5.4 Tracking Area registration
5.5 Support for manual CSG selection
5.5.1 E-UTRA case
5.5.2 UTRA case
5.6 RAN-assisted WLAN interworking
5.6.1 RAN assistance parameter handling in RRC_IDLE
5.6.2 Access network selection and traffic steering rules
5.6.3 RAN assistance parameters definition
5 Process and procedure descriptions
5.1 PLMN selection
5.1.1 Void
5.1.2 Support for PLMN selection Word‑p. 18
5.2 Cell selection and reselection Word‑p. 19
5.2.1 Introduction
5.2.2 States and state transitions in Idle Mode Word‑p. 20
5.2.3 Cell Selection process Word‑p. 21
5.2.3.1 Description
5.2.3.2 Cell Selection Criterion Word‑p. 22
5.2.3.2a Cell Selection Criterion for NB-IoT |R13| Word‑p. 23
5.2.3.3 CSG cells and Hybrid cells in Cell Selection Word‑p. 24
5.2.3.4 GSM case in Cell Selection
5.2.3.5 UTRAN case in Cell Selection
5.2.3.6 NR case in Cell Selection |R15|
5.2.4 Cell Reselection evaluation process
5.2.4.1 Reselection priorities handling
5.2.4.2 Measurement rules for cell re-selection Word‑p. 27
5.2.4.2a Measurement rules for cell re-selection for NB-IoT |R13|
5.2.4.3 Mobility states of a UE Word‑p. 28
5.2.4.4 Cells with cell reservations, access restrictions or unsuitable for normal camping Word‑p. 29
5.2.4.5 E-UTRAN Inter-frequency and inter-RAT Cell Reselection criteria
5.2.4.6 Intra-frequency and equal priority inter-frequency Cell Reselection criteria Word‑p. 31
5.2.4.6a Reselection for enhanced coverage |R13| Word‑p. 32
5.2.4.7 Cell reselection parameters in system information broadcasts
5.2.4.8 Cell reselection with CSG cells Word‑p. 35
5.2.4.8.1 Cell reselection from a non-CSG cell to a CSG cell
5.2.4.8.2 Cell reselection from a CSG cell Word‑p. 36
5.2.4.9 Cell reselection with Hybrid cells |R9|
5.2.4.10 E-UTRAN Inter-frequency Redistribution procedure |R13|
5.2.4.11 Cell reselection or CN type change when storing UE AS context |R13| Word‑p. 37
5.2.4.12 Relaxed monitoring |R14|
5.2.4.13 Cell reselection or CN type change in RRC_INACTIVE state |R15| Word‑p. 38
5.2.5 Void
5.2.6 Camped Normally state
5.2.7 Cell Selection at transition to RRC_IDLE or RRC_INACTIVE state
5.2.7a Cell Selection at transition to RRC_IDLE state for NB-IoT |R13|
5.2.8 Any Cell Selection state Word‑p. 39
5.2.8a Any Cell Selection state for NB-IoT |R13|
5.2.9 Camped on Any Cell state
5.3 Cell Reservations and Access Restrictions
5.3.1 Cell status and cell reservations Word‑p. 40
5.3.2 Access control Word‑p. 42
5.3.3 Emergency call
5.4 Tracking Area registration
5.5 Support for manual CSG selection
5.5.1 E-UTRA case
5.5.2 UTRA case Word‑p. 43
5.6 RAN-assisted WLAN interworking |R12|
