Tech-invite3GPPspaceIETF RFCsSIP
Quick21222324252627282931323334353637384‑5x

Content for  TS 36.133  Word version:  17.0.0

Top   Top   Up   Prev   None
1…   3.2…   4…   5…   6…   7…   8…   8.12…   9…   10…   A…   B…

 

B (Normative)  Conditions for RRM requirements applicability for operating bands |R10|Word‑p. 3088

B.1  Conditions for E-UTRAN RRC_IDLE state mobility

B.2  Conditions for UE Measurements Procedures in RRC_CONNECTED State

B.2.1  Conditions for E-UTRAN intra-frequency measurements

B.2.2  Conditions for E-UTRAN intra-frequency measurements with autonomous gapsWord‑p. 3095

B.2.3  Conditions for E-UTRAN inter-frequency measurements

B.2.4  Conditions for E-UTRAN inter-frequency measurements with autonomous gapsWord‑p. 3096

B.2.5  Conditions for E-UTRAN OTDOA intra-frequency RSTD Measurements

B.2.6  Conditions for E-UTRAN OTDOA inter-frequency RSTD Measurements

B.2.7  Conditions for Measurements of the secondary component carrier with deactivated SCellWord‑p. 3097

B.2.8  Conditions for E-UTRAN Intra-Frequency Measurements under Time Domain Measurement Resource Restriction

B.2.9  Conditions for E-UTRAN Intra-Frequency Measurements under Time Domain Measurement Resource Restriction with CRS Assistance Information |R11|Word‑p. 3098

B.2.10  Conditions for E-UTRAN intra-frequency discovery signal measurements |R12|

B.2.11  Conditions for E-UTRAN inter-frequency discovery signal measurements |R12|Word‑p. 3099

B.2.12  Conditions for E-UTRAN intra-frequency discovery signal measurements under operation with frame structure 3 |R13|Word‑p. 3100

B.2.13  Conditions for E-UTRAN inter-frequency discovery signal measurements under operation with frame structure 3 |R13|

B.2.14  Conditions for E-UTRAN intra-frequency measurements by UE Category M1 |R13|

B.2.15  Conditions for NB-IoT intra-frequency measurements by UE Category NB1 |R13|Word‑p. 3102

B.2.16  Conditions for NB-IoT intra-frequency RSTD measurements by UE Category NB1 |R14|Word‑p. 3103

B.2.17  Conditions for NB-IoT inter-frequency RSTD measurements by UE Category NB1 |R14|Word‑p. 3104

B.2.18  Conditions for E-UTRAN inter-frequency measurements by UE Category M1 |R14|Word‑p. 3105

B.2.19  Conditions for E-UTRAN measurements by UE Category M2 |R14|Word‑p. 3106

B.2.20  Conditions for E-UTRAN inter-frequency RSTD measurements by UE Category M1 |R14|

B.2.21  Conditions for E-UTRAN inter-frequency RSTD measurements by UE Category M2 |R14|Word‑p. 3107

B.2.22  Conditions for E-UTRAN intra-frequency RSTD measurements by UE Category M1 |R14|

B.2.23  Conditions for E-UTRAN intra-frequency RSTD measurements by UE Category M2 |R14|Word‑p. 3109

B.3  Conditions for measurements performance requirements for UE

B.3.1  Conditions for intra-frequency RSRP and RSRQ Accuracy Requirements

B.3.2Void

B.3.3  Conditions for inter-frequency RSRP and RSRQ Accuracy Requirements

B.3.4  Conditions for inter-frequency relative RSRP and RSRQ Accuracy Requirements

B.3.5  Conditions for UE Rx - Tx time difference

B.3.6  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurementsWord‑p. 3110

B.3.7  Conditions for inter-frequency RSTD measurements

B.3.8  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements

B.3.9  Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction

B.3.10  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction

B.3.11  Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information |R11|Word‑p. 3111

B.3.12  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information |R11|

B.3.13  Conditions for UE Rx-Tx Time Difference Measurement under Time Domain Measurement Resource Restriction with CRS Assistance Information |R11|

B.3.14  Conditions for Intra-Frequency Absolute Discovery Signal Measurement Accuracy Requirements |R12|

B.3.15  Conditions for Intra-Frequency Relative Discovery Signal Measurement Accuracy Requirements |R12|Word‑p. 3112

B.3.16  Conditions for Inter-Frequency Absolute Discovery Signal Measurement Accuracy Requirements |R12|Word‑p. 3113

B.3.17  Conditions for Inter-Frequency Relative Discovery Signal Measurement Accuracy Requirements |R12|

B.3.18  Conditions for Intra-frequency Absolute RS-SINR Accuracy Requirements |R12|

B.3.19  Conditions for Inter-frequency Absolute RS-SINR Accuracy Requirements |R12|

B.3.20  Conditions for Inter-frequency Relative RS-SINR Accuracy Requirements |R13|

B.3.21  Conditions for Intra-Frequency Absolute Accuracy Requirements for Measurements under Operation with Frame Structure 3 |R13|Word‑p. 3114

B.3.22  Conditions for Intra-Frequency Relative Accuracy Requirements for Measurements under Operation with Frame Structure 3 |R13|

B.3.23  Conditions for Inter-Frequency Absolute Accuracy Requirements for Measurements under Operation with Frame Structure 3 |R13|

B.3.24  Conditions for Inter-Frequency Relative Accuracy Requirements for Measurements under Operation with Frame Structure 3 |R13|Word‑p. 3116

B.3.25  Conditions for NB-IoT intra-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1 |R13|

B.3.26  Conditions for NB-IoT inter-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1 |R13|

B.3.27  Conditions for intra-frequency RSRP and RSRQ Accuracy Requirements for Category 0 |R13|

B.3.28  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements for Category 0 |R13|Word‑p. 3117

B.3.29  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements for NB1 |R14|

B.3.30  Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for NB1 |R14|

B.3.31  Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for Cat M1 |R14|

B.3.32  Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for Cat M2 |R14|

B.3.33  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements for Cat M1 |R14|Word‑p. 3118

B.3.34  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements for Cat M2 |R14|

B.4  RRM Requirements Exceptions

B.5  Conditions for Measurement Performance Requirements for ProSe UE |R12|

B.6  Conditions for V2X |R14|

B.7  Conditions for sTTI and 1ms-TTI with 3 Subframe HARQ Processing |R15|

$  Change history:Word‑p. 3124


Up   Top