Tech-invite3GPPspaceIETF RFCsSIP
Quick21222324252627282931323334353637384‑5x

Content for  TS 36.133  Word version:  17.0.0

Top   Top   Up   Prev   Next
1…   3.2…   4…   5…   6…   7…   8…   8.12…   9…   10…   A…   B…

 

9  Measurements performance requirements for UE

9.1  E-UTRAN measurements

9.1.1  Introduction |R9|

9.1.2  Intra-frequency RSRP Accuracy RequirementsWord‑p. 660

9.1.2A  Intra-frequency RSRP Accuracy Requirements in High Doppler Conditions |R12|Word‑p. 667

9.1.2B  Intra-frequency RSRP Accuracy requirements for CA Idle Mode Measurements |R15|Word‑p. 668

9.1.3  Inter-frequency RSRP Accuracy RequirementsWord‑p. 669

9.1.3A  Inter-frequency RSRP Accuracy Requirements in High Doppler Conditions |R12|Word‑p. 672

9.1.3B  Inter-frequency RSRP Accuracy requirements for CA Idle Mode Measurements |R15|Word‑p. 674

9.1.4  RSRP Measurement Report MappingWord‑p. 675

9.1.5  Intra-frequency RSRQ Accuracy Requirements

9.1.5A  Intra-frequency RSRQ Accuracy Requirements in High Doppler Conditions |R12|Word‑p. 680

9.1.5B  Intra-frequency RSRQ Accuracy requirements for CA Idle Mode Measurements |R15|

9.1.6  Inter-frequency RSRQ Accuracy RequirementsWord‑p. 681

9.1.6A  Inter-frequency RSRQ Accuracy Requirements in High Doppler Conditions |R12|

9.1.6B  Inter-frequency absolute RSRQ Accuracy requirements for CA Idle Mode Measurements |R15|Word‑p. 687

9.1.7  RSRQ Measurement Report MappingWord‑p. 688

9.1.8  Power Headroom |R13|

9.1.9  UE Rx - Tx time difference |R9|

9.1.10  Reference Signal Time Difference (RSTD) |R9|Word‑p. 693

9.1.11  Carrier aggregation measurement accuracy |R10|Word‑p. 699

9.1.12  Reference Signal Time Difference (RSTD) Measurement Accuracy Requirements for Carrier Aggregation |R10|

9.1.13  Measurement accuracy for UE category 0 |R12|Word‑p. 701

9.1.14  Accuracy requirements for Discovery Signal Measurements |R12|Word‑p. 703

9.1.15  Discovery signal measurements accuracy for E-UTRAN carrier aggregation |R12|

9.1.16  Accuracy requirements for RSRQ measurement on all OFDM symbols |R12|Word‑p. 708

9.1.17  RS-SINR Measurements |R13|

9.1.18  Accuracy Requirements for Measurements under Operation with Frame Structure 3 |R13|Word‑p. 711

9.1.18.1  Introduction

9.1.18.2  RSRP measurements

9.1.18.3  RSRQ measurements

9.1.18.4  CSI-RSRP measurementsWord‑p. 715

9.1.18.5  RSSI measurementsWord‑p. 717

9.1.18.6  Channel occupancy measurements

9.1.19  Accuracy Requirements for Carrier Aggregation for Measurements under Operation with Frame Structure 3 |R13|Word‑p. 719

9.1.20  SFN and Subframe Time Difference (SSTD) |R13|Word‑p. 720

9.1.21  Measurement accuracy for UE category M1 |R13|Word‑p. 721

9.1.21.1  Intra-frequency Absolute RSRP Accuracy for UE category M1 with CE mode A

9.1.21.2  Intra-frequency Relative Accuracy of RSRP for UE category M1 with CE mode AWord‑p. 723

9.1.21.3  Intra-frequency Absolute RSRP Accuracy for UE category M1 with CE mode BWord‑p. 724

9.1.21.4  Intra-frequency Relative Accuracy of RSRP for UE category M1 with CE mode BWord‑p. 726

9.1.21.5  RSRP Measurement Report MappingWord‑p. 727

9.1.21.6  Intra-frequency Absolute Accuracy of RSRQ for UE category M1 with CE mode A |R14|

9.1.21.7  Intra-frequency Absolute Accuracy of RSRQ for UE category M1 with CE mode B |R14|Word‑p. 728

9.1.21.8  RSRQ Measurement Report Mapping |R14|Word‑p. 729

9.1.21.9  Inter-frequency Absolute RSRP Accuracy for UE category M1 with CE mode A |R14|

9.1.21.10  Inter-frequency Relative Accuracy of RSRP for UE category M1 with CE mode A |R14|Word‑p. 730

9.1.21.11  Inter-frequency Absolute RSRP Accuracy for UE category M1 with CE mode B |R14|Word‑p. 731

9.1.21.12  Inter-frequency Relative Accuracy of RSRP for UE category M1 with CE mode B |R14|Word‑p. 732

9.1.21.13  Inter-frequency Absolute Accuracy of RSRQ for UE category M1 in CE mode A |R14|Word‑p. 733

9.1.21.14  Inter-frequency Relative Accuracy of RSRQ for UE category M1 in CE mode A |R14|Word‑p. 734

9.1.21.15  Inter-frequency Absolute Accuracy of RSRQ for UE category M1 in CE mode B |R14|Word‑p. 735

9.1.21.16  Inter-frequency Relative Accuracy of RSRQ for UE category M1 in CE mode B |R14|Word‑p. 736

9.1.21.17  Inter-Frequency RSTD Accuracy Requirement for UE catergory M1 in CE mode A |R14|Word‑p. 737

9.1.21.18  Inter-Frequency RSTD Accuracy Requirement for UE catergory M1 in CE mode B |R14|Word‑p. 738

9.1.21.19  UE RX-TX time difference Accuracy Requirement for Cat-M1 |R14|Word‑p. 739

9.1.21.20  Intra-Frequency RSTD Accuracy Requirement for UE catergory M1 in CE mode A |R14|Word‑p. 740

9.1.21.21  Intra-Frequency RSTD Accuracy Requirement for UE catergory M1 in CE mode B |R14|Word‑p. 743

9.1.21.22  Downlink Channel Report Mapping for UE Category M1 |R16|Word‑p. 746

9.1.21.23  Downlink Channel Quality Measurement Accuracy for UE Category M1 with CE Mode A |R16|

9.1.21.24  Downlink Channel Quality Measurement Accuracy for UE Category M1 with CE Mode B |R16|Word‑p. 749

9.1.22  Measurement accuracy for UE Category NB1 |R13|Word‑p. 750

9.1.23  Power Headroom for UE Category NB1 |R13|Word‑p. 760

9.1.24Void

9.1.25  Measurement accuracy for UE category M2 |R14|Word‑p. 763

9.1.26  Measurement Accuracy for non-BL CE UE |R14|Word‑p. 769

9.1.27  SFN and frame Timing Difference (SFTD) |R15|Word‑p. 782

9.2  UTRAN FDD MeasurementsWord‑p. 784

9.3  UTRAN TDD Measurements

9.4  GSM Measurements

9.5  CDMA2000 1x RTT Measurements

9.6  PCMAX,c |R10|Word‑p. 787

9.7  IEEE802.11 Measurements |R12|

9.8  MBSFN Measurements |R12|Word‑p. 788

9.9  ProSe Measurements |R12|Word‑p. 795

9.10  V2X Measurements |R14|Word‑p. 798

9.11  NR Measurements |R15|Word‑p. 801


Up   Top   ToC