Tech-invite 3GPPspace IETFspace

21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 4‑5x

Content for TS 36.111 Word version: 16.0.0

1… 5…

5 LMU RF Requirements

5.1 General

5.1.1 Detection probability requirement and false alarm requirement Word‑p. 9

5.1.2 Operating bands

5.1.3 Operating bands Word‑p. 10

5.2 Reference sensitivity level Word‑p. 12

5.2.1 Minimum requirement

5.3 Dynamic range

5.3.1 Minimum requirement

5.4 In-channel selectivity

5.4.1 Minimum requirement Word‑p. 13

5.5 Adjacent Channel Selectivity (ACS) and narrow-band blocking

5.5.1 Minimum requirement

5.6 Blocking Word‑p. 14

5.6.1 General blocking requirement

5.6.1.1 Minimum requirement Word‑p. 15

5.7 Receiver spurious emissions Word‑p. 16

5.7.1 Minimum requirement

5.8 Receiver intermodulation

5.8.1 Minimum requirement

6 UL RTOA Measurement Time Requirements Word‑p. 17

6.1 General

6.2 Requirements Word‑p. 18

6.2.1 Requirements for FDD without DRX

6.2.2 Requirements for TDD without DRX Word‑p. 19

6.2.3 UL RTOA Measurements upon Receiving SRS Configuration Update

6.2.4 UL RTOA Measurements when Dropped SRS occurs Word‑p. 20

6.3 Measurement Reporting Delay

7 UL RTOA Measurement Accuracy Requirements

7.1 General

7.2 UL RTOA measurement accuracy

7.2.1 UL RTOA measurement accuracy for a UE not configured with CA

7.2.2 UL RTOA measurement accuracy for a UE configured with CA Word‑p. 21

7.2.3 UL RTOA measurement accuracy when LMU is performing multiple UL RTOA measurements in parallel Word‑p. 22

7.2.3.1 Parallel UL RTOA measurements on the same carrier frequency

7.2.3.2 Parallel UL RTOA measurements over two carrier frequencies Word‑p. 23

8 UL RTOA Measurement Report Mapping Word‑p. 24

9 Search Window for UL RTOA Measurements

A Reference Measurement Channel Word‑p. 26

B Propagation Conditions Word‑p. 30

B.1 Static Propagation condition

B.2 Multi-path fading propagation conditions

C Characteristics of the interfering signals Word‑p. 31

$ Change History Word‑p. 32