Content for TS 28.304 Word version: 17.0.0
...
0 Introduction p. 4
The present document is part of a TS-family covering the 3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below:
28.304
Control and monitoring of Power, Energy and Environmental (PEE) parameters Integration Reference Point (IRP); Requirements
28.305
Control and monitoring of Power, Energy and Environmental (PEE) parameters Integration Reference Point (IRP): Information Service (IS)
28.306
Control and monitoring of Power, Energy and Environmental (PEE) parameters Integration Reference Point (IRP); Solution Set (SS) definitions
1 Scope p. 5
The present document specifies the requirements for the control and monitoring of Power, Energy and Environmental (PEE) parameters in the following types of Radio Access Networks (RAN): GSM, UTRAN and E-UTRAN.
2 References p. 5
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 32.101: "Telecommunication management; Principles and high level requirements".
[3]
ETSI ES 202 336-12 (V1.1.1) (2015-06): "Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (power, cooling and building environment systems used in telecommunication networks); Part 12: ICT equipment power, energy and environmental parameters monitoring information model".
[4]
ETSI ES 202 336-1 (V1.1.2) (2008-09): " Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks) Part 1: Generic Interface".
[5]
TS 32.601: "Telecommunication management; Configuration Management (CM); Basic CM Integration Reference Point (IRP); Requirements".
[6]
TS 32.411: "Telecommunication management; Performance Management (PM) Integration Reference Point (IRP): Requirements".
[7]
TS 32.111-1: "Telecommunication management; Fault Management; Part 1: 3G fault management requirements".
[8]
TS 32.611: "Telecommunication management; Configuration Management (CM); Bulk CM Integration Reference Point (IRP): Requirements".
[9]
TS 32.301: "Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP); Requirements".
3 Definitions and abbreviations p. 5
3.1 Definitions p. 5
For the purposes of the present document, the terms and definitions given in TR 21.905 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905.
Remote Management Server:
Application which controls and monitors power, energy and environmental parameters of Radio Access Networks.
Network Management layer Remote Management Server:
Remote Management Server which operates at the NM layer.
Vendor-Specific Remote Management Server:
Remote Management Server which operates at the DM layer.
XCU:
Defined in ETSI ES 202 336-12 [3].
DGU:
Defined in ETSI ES 202 336-12 [3].
3.2 Abbreviations p. 6
For the purposes of the present document, the abbreviations given in TR 21.905 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905.
CU
Control Unit
DGU
Data Gathering Unit
NM-RMS
Network Management layer RMS
PEE
Power, Energy and Environmental
RMS
Remote Management Server
VS-RMS
Vendor-Specific RMS
XCU
XML enabled CU
