Tech-invite3GPPspaceIETFspace
21222324252627282931323334353637384‑5x

Content for  TS 23.333  Word version:  17.1.0

Top   Top   Up   Prev   Next
1…   4   5…   5.8…   5.12…   5.14…   5.20…   5.24…   6…   6.1.8…   6.2…   6.2.3…   6.2.4…   6.2.5   6.2.6…   6.2.7…   6.2.8…   6.2.9…   6.2.10…   6.2.10.2.7   6.2.10.3…   6.2.11…   6.2.13…   6.2.13.2.6…   6.2.14…   6.2.15…   6.2.16…   6.2.18…   6.2.19…   6.2.19.3…   6.2.20…   6.2.21…   6.2.22…   6.2.23   6.2.24…   7   8…   8.11…   8.20   8.21   8.22   8.23…   8.30…   8.39…   8.45…   8.56…

 

6.2.9  Audio Conference Procedurep. 87

6.2.9.1  Context Modelp. 87

A conference consists of one context with terminations representing each user. The MRFP shall consider the context to represent an ad-hoc conference when three or more terminations have been through-connected.

6.2.9.2  Ad-hoc Conferencesp. 87

6.2.9.2.1  Generalp. 87
An ad-hoc conference starts without any prior booking or reservation when a user initiates the conference, for further definition of ad-hoc conference, see TS 24.147. Further participants can then be added to the conference without any prior reservation of resources, through either a method of "dial-out" where the conference calls the participant, or by a "dial-in" scenario where the end user calls the conference.
Up
6.2.9.2.2  Create Ad-hoc Audio Conference Procedurep. 87
The MRFC receives a trigger to create an ad-hoc conference. The MRFC then initiates the "Reserve and Configure IMS Resources" procedure as specified in clause 8.20.
The MRFC:
Requests a new context and a new bearer termination including the Remote Connection Address.
The MRFP:
Creates a new context
Adds a new termination to the context and returns the Local Connection Address.
The MRFC:
Notifies the new user about the Local Connection Address.
Figure 6.2.9.1 shows the message sequence chart example for creating conference procedure.
Copy of original 3GPP image for 3GPP TS 23.333, Fig. 6.2.9.1: Create Ad-hoc conference
Figure 6.2.9.1: Create Ad-hoc conference
(⇒ copy of original 3GPP image)
Up
6.2.9.2.3  Closure of Audio Conference Procedurep. 88
The MRFP will in accordance with the general rules of H.248.1 delete the context when the last termination has been subtracted from the context.
6.2.9.2.4  Add Subsequent User to Conference; Dial-outp. 88
The MRFC receives a trigger to add a new bearer termination. The trigger does not contain connection address nor resources that the new participant can use. The MRFC adds a new bearer termination by initiating the "Reserve IMS Resources" procedure as specified in clause 8.21.
The MRFC:
Requests a bearer termination to be added to the existing context.
The MRFP:
Adds a bearer termination to the existing context and notifies the MRFC about its reserved resources and connection address.
The MRFC:
Sends a notification to the new user about the MRFP's resources and connection address.
The MRFC will then receive a trigger containing the new user's address and resources. The MRFC initiates the "Configure IMS resources" procedure as specified in clause 8.22.
The MRFC:
Requests that remote address and resources be configured to the termination
The MRFP:
Modifies the termination using the received data and confirms the action
The MRFC:
Notifies the new participant about the result
Figure 6.2.9.2 shows the message sequence chart example for dial-out procedure.
Copy of original 3GPP image for 3GPP TS 23.333, Fig. 6.2.9.2: Procedure to add user in Dial-out scenario
Up
6.2.9.2.5  Add subsequent user to conference; Dial-inp. 89
Precondition is that a conference exists. The MRFC receives a trigger to add a new user including Remote Connection Address. The MRFC then initiates the "Reserve and Configure IMS Resources" procedure as specified in clause 8.20.
The MRFC:
Requests a new bearer termination, including the Remote Connection Address, to be added to the existing context.
The MRFP:
Adds a new termination to the existing context and returns the Local Connection Address.
The MRFC notifies the new user about the Local Connection Address.
Figure 6.2.9.3 shows the message sequence chart example for dial-in procedure.
Copy of original 3GPP image for 3GPP TS 23.333, Fig. 6.2.9.3: Procedure to add user in Dial-in scenario
Up
6.2.9.2.6  Remove Conference Participant Procedurep. 90
When the MRFC receives a trigger that a user has left the conference, it initiates the "Release IMS termination" procedure as specified in clause 8.23.
The MRFC:
Requests that the termination is released.
The MRFP:
Releases the termination and informs the MRFC about the result.
Figure 6.2.9.4 shows the message sequence chart example for removing conference participant procedure.
Copy of original 3GPP image for 3GPP TS 23.333, Fig. 6.2.9.4: Procedure to remove conference participant
Up

Up   Top   ToC