tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

RFC 3877

 
 
 

Alarm Management Information Base (MIB)

Part 3 of 4, p. 38 to 59
Prev RFC Part       Next RFC Part

 


prevText      Top      Up      ToC       Page 38 
5.  ITU Alarm

5.1.  Overview

   This MIB module defines alarm information specific to the alarm model
   defined in ITU M.3100 [M.3100], X.733 [X.733], and X.736 [X.736].
   This MIB module follows the modular architecture defined by the Alarm
   MIB, in which the generic Alarm MIB can be augmented by other alarm
   information defined according to more specific models that define
   additional behaviour and characteristics.

Top      Up      ToC       Page 39 
   The ituAlarmTable contains information from the ITU Alarm Model about
   possible alarms in the system.

   The ituAlarmActiveTable contains information from the ITU Alarm Model
   about alarms modelled using the ituAlarmTable that are currently
   occurring on the system.

   The ituAlarmActiveStatsTable provides statistics on current and total
   alarms.

5.2.  IANA Considerations

   Over time, there will be a need to add new IANAITUEventType and
   IANAItuProbableCause enumerated values.  The Internet Assigned Number
   Authority (IANA) is responsible for the assignment of the
   enumerations in these TCs.

   IANAItuProbableCause value of 0 is reserved for special purposes and
   MUST NOT be assigned.  Values of IANAItuProbableCause in the range 1
   to 1023 are reserved for causes that correspond to ITU-T probable
   cause.  All other requests for new causes will be handled on a
   first-come basis, with 1025.

   Request should  come in the form of well-formed SMI [RFC2578] for
   enumeration names that are unique and sufficiently descriptive.

   While some effort will be taken to ensure that new enumerations do
   not conceptually duplicate existing enumerations it is acknowledged
   that the existence of conceptual duplicates in the starting probable
   cause list is an known industry reality.

   To aid IANA in the administration of probable cause names and values,
   the OPS Area Director will appoint one or more experts to help review
   requests.

   See http://www.iana.org

   The following shall be used as the initial values, but the latest
   values for these textual conventions should be obtained from IANA:

IANA-ITU-ALARM-TC-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, mib-2
       FROM SNMPv2-SMI          -- [RFC2578]
   TEXTUAL-CONVENTION
       FROM SNMPv2-TC;          -- [RFC2579]

Top      Up      ToC       Page 40 
 ianaItuAlarmNumbers MODULE-IDENTITY
     LAST-UPDATED "200409090000Z"  -- September 09, 2004
     ORGANIZATION "IANA"
     CONTACT-INFO
         "Postal:    Internet Assigned Numbers Authority
                     Internet Corporation for Assigned Names
                     and Numbers
                     4676 Admiralty Way, Suite 330
                     Marina del Rey, CA 90292-6601
                     USA

         Tel:    +1  310-823-9358
         E-Mail: iana@iana.org"
     DESCRIPTION
         "The MIB module defines the ITU Alarm
         textual convention for objects expected to require
         regular extension.

         Copyright (C) The Internet Society (2004).  The
         initial version of this MIB module was published
         in RFC 3877.  For full legal notices see the RFC
         itself.  Supplementary information may be available on:
         http://www.ietf.org/copyrights/ianamib.html"
      REVISION    "200409090000Z"  -- September 09, 2004
      DESCRIPTION
          "Initial version, published as RFC 3877."
     ::= { mib-2 119 }

IANAItuProbableCause ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "ITU-T probable cause values.  Duplicate values defined in
         X.733 are appended with X733 to ensure syntactic uniqueness.
         Probable cause value 0 is reserved for special purposes.

         The Internet Assigned Number Authority (IANA) is responsible
         for the assignment of the enumerations in this TC.
         IANAItuProbableCause value of 0 is reserved for special
         purposes and MUST NOT be assigned.

         Values of IANAItuProbableCause in the range 1 to 1023 are
         reserved for causes that correspond to ITU-T probable cause.

         All other requests for new causes will be handled on a
         first-come, first served basis and will be assigned
         enumeration values starting with 1025.

         Request should  come in the form of well-formed

Top      Up      ToC       Page 41 
         SMI [RFC2578] for enumeration names that are unique and
         sufficiently descriptive.

         While some effort will be taken to ensure that new probable
         causes do not conceptually duplicate existing probable
         causes it is acknowledged that the existence of conceptual
         duplicates in the starting probable cause list is an known
         industry reality.

         To aid IANA in the administration of probable cause names
         and values, the OPS Area Director will appoint one or more
         experts to help review requests.

         See http://www.iana.org"
    REFERENCE
        "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
         ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
            Reporting Function', 1992
         ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"

    SYNTAX         INTEGER
            {
            -- The following probable causes were defined in M.3100
             aIS  (1),
             callSetUpFailure  (2),
             degradedSignal  (3),
             farEndReceiverFailure  (4),
             framingError  (5),
             lossOfFrame (6),
             lossOfPointer  (7),
             lossOfSignal  (8),
             payloadTypeMismatch (9),
             transmissionError (10),
             remoteAlarmInterface (11),
             excessiveBER  (12),
             pathTraceMismatch  (13),
             unavailable  (14),
             signalLabelMismatch (15),
             lossOfMultiFrame (16),
             receiveFailure (17),
             transmitFailure (18),
             modulationFailure (19),
             demodulationFailure (20),
             broadcastChannelFailure (21),

Top      Up      ToC       Page 42 
             connectionEstablishmentError (22),
             invalidMessageReceived (23),
             localNodeTransmissionError (24),
             remoteNodeTransmissionError (25),
             routingFailure (26),

 --Values 27-50 are reserved for communications alarm related
 --probable causes
 -- The following are used with equipment alarm.

             backplaneFailure (51),
             dataSetProblem  (52),
             equipmentIdentifierDuplication  (53),
             externalIFDeviceProblem  (54),
             lineCardProblem (55),
             multiplexerProblem  (56),
             nEIdentifierDuplication  (57),
             powerProblem  (58),
             processorProblem  (59),
             protectionPathFailure  (60),
             receiverFailure  (61),
             replaceableUnitMissing  (62),
             replaceableUnitTypeMismatch (63),
             synchronizationSourceMismatch  (64),
             terminalProblem   (65),
             timingProblem   (66),
             transmitterFailure  (67),
             trunkCardProblem  (68),
             replaceableUnitProblem  (69),
             realTimeClockFailure (70),
 --An equipment alarm to be issued if the system detects that the
 --real time clock has failed
             antennaFailure (71),
             batteryChargingFailure (72),
             diskFailure (73),
             frequencyHoppingFailure (74),
             iODeviceError (75),
             lossOfSynchronisation (76),
             lossOfRedundancy (77),
             powerSupplyFailure (78),
             signalQualityEvaluationFailure (79),
             tranceiverFailure (80),
             protectionMechanismFailure (81),
             protectingResourceFailure (82),
 -- Values 83-100 are reserved for equipment alarm related probable
 -- causes
 -- The following are used with environmental alarm.
             airCompressorFailure  (101),

Top      Up      ToC       Page 43 
             airConditioningFailure  (102),
             airDryerFailure   (103),
             batteryDischarging  (104),
             batteryFailure   (105),
             commercialPowerFailure  (106),
             coolingFanFailure  (107),
             engineFailure  (108),
             fireDetectorFailure  (109),
             fuseFailure  (110),
             generatorFailure  (111),
             lowBatteryThreshold (112),
             pumpFailure  (113),
             rectifierFailure  (114),
             rectifierHighVoltage  (115),
             rectifierLowFVoltage  (116),
             ventilationsSystemFailure  (117),
             enclosureDoorOpen  (118),
             explosiveGas  (119),
             fire (120),
             flood   (121),
             highHumidity  (122),
             highTemperature  (123),
             highWind  (124),
             iceBuildUp  (125),
             intrusionDetection  (126),
             lowFuel  (127),
             lowHumidity  (128),
             lowCablePressure  (129),
             lowTemperatue  (130),
             lowWater  (131),
             smoke  (132),
             toxicGas  (133),
             coolingSystemFailure (134),
             externalEquipmentFailure (135),
             externalPointFailure (136),
 -- Values 137-150 are reserved for environmental alarm related
 -- probable causes
 -- The following are used with Processing error alarm.
             storageCapacityProblem (151),
             memoryMismatch  (152),
             corruptData  (153),
             outOfCPUCycles   (154),
             sfwrEnvironmentProblem  (155),
             sfwrDownloadFailure  (156),
             lossOfRealTimel (157),
 --A processing error alarm to be issued after the system has
 --reinitialised.  This will indicate
 --to the management systems that the view they have of the managed

Top      Up      ToC       Page 44 
 --system may no longer
 --be valid.  Usage example: The managed
 --system issues this alarm after a reinitialization with severity
 --warning to inform the
 --management system about the event.  No clearing notification will
 --be sent.
             applicationSubsystemFailure (158),
             configurationOrCustomisationError (159),
             databaseInconsistency (160),
             fileError (161),
             outOfMemory (162),
             softwareError (163),
             timeoutExpired (164),
             underlayingResourceUnavailable (165),
             versionMismatch (166),
 --Values 168-200 are reserved for processing error alarm related
 -- probable causes.
             bandwidthReduced (201),
             congestion (202),
             excessiveErrorRate (203),
             excessiveResponseTime (204),
             excessiveRetransmissionRate (205),
             reducedLoggingCapability (206),
             systemResourcesOverload (207 ),
             -- The following were defined X.733
             adapterError (500),
             applicationSubsystemFailture (501),
             bandwidthReducedX733 (502),
             callEstablishmentError (503),
             communicationsProtocolError (504),
             communicationsSubsystemFailure (505),
             configurationOrCustomizationError (506),
             congestionX733 (507),
             coruptData (508),
             cpuCyclesLimitExceeded (509),
             dataSetOrModemError (510),
             degradedSignalX733 (511),
             dteDceInterfaceError (512),
             enclosureDoorOpenX733 (513),
             equipmentMalfunction (514),
             excessiveVibration (515),
             fileErrorX733 (516),
             fireDetected (517),
             framingErrorX733 (518),
             heatingVentCoolingSystemProblem (519),
             humidityUnacceptable (520),
             inputOutputDeviceError (521),
             inputDeviceError (522),

Top      Up      ToC       Page 45 
             lanError (523),
             leakDetected (524),
             localNodeTransmissionErrorX733 (525),
             lossOfFrameX733 (526),
             lossOfSignalX733 (527),
             materialSupplyExhausted (528),
             multiplexerProblemX733 (529),
             outOfMemoryX733 (530),
             ouputDeviceError (531),
             performanceDegraded (532),
             powerProblems (533),
             pressureUnacceptable (534),
             processorProblems (535),
             pumpFailureX733 (536),
             queueSizeExceeded (537),
             receiveFailureX733 (538),
             receiverFailureX733 (539),
             remoteNodeTransmissionErrorX733 (540),
             resourceAtOrNearingCapacity (541),
             responseTimeExecessive (542),
             retransmissionRateExcessive (543),
             softwareErrorX733 (544),
             softwareProgramAbnormallyTerminated (545),
             softwareProgramError (546),
             storageCapacityProblemX733 (547),
             temperatureUnacceptable (548),
             thresholdCrossed (549),
             timingProblemX733 (550),
             toxicLeakDetected (551),
             transmitFailureX733 (552),
             transmiterFailure (553),
             underlyingResourceUnavailable (554),
             versionMismatchX733 (555),
             -- The following are defined in X.736
             authenticationFailure (600),
             breachOfConfidentiality (601),
             cableTamper (602),
             delayedInformation (603),
             denialOfService (604),
             duplicateInformation (605),
             informationMissing (606),
             informationModificationDetected (607),
             informationOutOfSequence (608),
             keyExpired (609),
             nonRepudiationFailure (610),
             outOfHoursActivity (611),
             outOfService (612),
             proceduralError (613),

Top      Up      ToC       Page 46 
             unauthorizedAccessAttempt (614),
             unexpectedInformation (615),

             other (1024)
             }

IANAItuEventType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
            "The ITU event Type values.

            The Internet Assigned Number Authority (IANA) is
            responsible for the assignment of the enumerations
            in this TC.

            Request should  come in the form of well-formed
            SMI [RFC2578] for enumeration names that are unique
            and sufficiently descriptive.

            See http://www.iana.org "
    REFERENCE
           "ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"
    SYNTAX         INTEGER
           {
           other (1),
           communicationsAlarm (2),
           qualityOfServiceAlarm (3),
           processingErrorAlarm (4),
           equipmentAlarm (5),
           environmentalAlarm (6),
           integrityViolation (7),
           operationalViolation (8),
           physicalViolation (9),
           securityServiceOrMechanismViolation (10),
           timeDomainViolation (11)
           }

END

Top      Up      ToC       Page 47 
5.3.  Textual Conventions

ITU-ALARM-TC-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, mib-2
       FROM SNMPv2-SMI         -- [RFC2578]
   TEXTUAL-CONVENTION
       FROM SNMPv2-TC;         -- [RFC2579]

  ituAlarmTc MODULE-IDENTITY
      LAST-UPDATED "200409090000Z"  -- September 09, 2004
      ORGANIZATION "IETF Distributed Management Working Group"
      CONTACT-INFO
         " WG EMail: disman@ietf.org
           Subscribe: disman-request@ietf.org
           http://www.ietf.org/html.charters/disman-charter.html

           Chair:     Randy Presuhn
                      randy_presuhn@mindspring.com

           Editors:   Sharon Chisholm
                      Nortel Networks
                      PO Box 3511 Station C
                      Ottawa, Ont.  K1Y 4H7
                      Canada
                      schishol@nortelnetworks.com

                      Dan Romascanu
                      Avaya
                      Atidim Technology Park, Bldg. #3
                      Tel Aviv, 61131
                      Israel
                      Tel: +972-3-645-8414
                      Email: dromasca@avaya.com"
      DESCRIPTION
         "This MIB module defines the ITU Alarm
         textual convention for objects not expected to require
         regular extension.

         Copyright (C) The Internet Society (2004).  The
         initial version of this MIB module was published
         in RFC 3877.  For full legal notices see the RFC
         itself.  Supplementary information may be available on:
         http://www.ietf.org/copyrights/ianamib.html"
      REVISION    "200409090000Z"  -- September 09, 2004
      DESCRIPTION
          "Initial version, published as RFC 3877."

Top      Up      ToC       Page 48 
     ::= { mib-2 120 }

ItuPerceivedSeverity ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
            "ITU perceived severity values"
    REFERENCE
           "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
            ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
            Reporting Function', 1992"
    SYNTAX         INTEGER
           {
           cleared (1),
           indeterminate (2),
           critical (3),
           major (4),
           minor (5),
           warning (6)
           }

ItuTrendIndication ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
            "ITU trend indication values for alarms."
    REFERENCE
           "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
            ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
            Reporting Function', 1992"
    SYNTAX         INTEGER
      {
      moreSevere (1),
      noChange (2),
      lessSevere (3)
      }

END

Top      Up      ToC       Page 49 
5.4.  Definitions

   ITU-ALARM-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE,
      Gauge32, mib-2
          FROM SNMPv2-SMI                -- [RFC2578]
      AutonomousType, RowPointer
          FROM SNMPv2-TC                 -- [RFC2579]
      SnmpAdminString
          FROM SNMP-FRAMEWORK-MIB        -- [RFC3411]
      alarmListName, alarmModelIndex,
      alarmActiveDateAndTime, alarmActiveIndex
          FROM ALARM-MIB                 -- [RFC3877]
      ItuPerceivedSeverity,
      ItuTrendIndication
          FROM ITU-ALARM-TC-MIB          -- [RFC3877]
      IANAItuProbableCause,
      IANAItuEventType
          FROM IANA-ITU-ALARM-TC-MIB     -- [RFC3877]
      MODULE-COMPLIANCE, OBJECT-GROUP
          FROM SNMPv2-CONF               -- [RFC2580]
      ZeroBasedCounter32
          FROM RMON2-MIB;                -- [RFC2021]

     ituAlarmMIB MODULE-IDENTITY
         LAST-UPDATED "200409090000Z"  -- September 09, 2004
         ORGANIZATION "IETF Distributed Management Working Group"
         CONTACT-INFO
              "WG EMail: disman@ietf.org
              Subscribe: disman-request@ietf.org
              http://www.ietf.org/html.charters/disman-charter.html

              Chair:     Randy Presuhn
                         randy_presuhn@mindspring.com

              Editors:   Sharon Chisholm
                         Nortel Networks
                         PO Box 3511 Station C
                         Ottawa, Ont.  K1Y 4H7
                         Canada
                         schishol@nortelnetworks.com

                         Dan Romascanu
                         Avaya
                         Atidim Technology Park, Bldg. #3
                         Tel Aviv, 61131

Top      Up      ToC       Page 50 
                         Israel
                         Tel: +972-3-645-8414
                         Email: dromasca@avaya.com"
         DESCRIPTION
                 "The MIB module describes ITU Alarm information
                 as defined in ITU Recommendation M.3100 [M.3100],
                 X.733 [X.733] and X.736 [X.736].

                 Copyright (C) The Internet Society (2004).  The
                 initial version of this MIB module was published
                 in RFC 3877.  For full legal notices see the RFC
                 itself.  Supplementary information may be available on:
                 http://www.ietf.org/copyrights/ianamib.html"
         REVISION    "200409090000Z"  -- September 09, 2004
         DESCRIPTION
             "Initial version, published as RFC 3877."
         ::= { mib-2 121 }

   ituAlarmObjects OBJECT IDENTIFIER ::= { ituAlarmMIB 1 }

   ituAlarmModel OBJECT IDENTIFIER ::= { ituAlarmObjects 1 }

   ituAlarmActive  OBJECT IDENTIFIER ::= { ituAlarmObjects 2 }

   ituAlarmTable OBJECT-TYPE
      SYNTAX      SEQUENCE OF ItuAlarmEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "A table of ITU Alarm information for possible alarms
          on the system."
      ::= { ituAlarmModel 1 }

   ituAlarmEntry OBJECT-TYPE
      SYNTAX      ItuAlarmEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "Entries appear in this table whenever an entry is created
           in the alarmModelTable with a value of alarmModelState in
           the range from 1 to 6.  Entries disappear from this table
           whenever the corresponding entries are deleted from the
           alarmModelTable, including in cases where those entries
           have been deleted due to local system action.  The value of
           alarmModelSpecificPointer has no effect on the creation
           or deletion of entries in this table.  Values of
           alarmModelState map to values of ituAlarmPerceivedSeverity
           as follows:

Top      Up      ToC       Page 51 
             alarmModelState -> ituAlarmPerceivedSeverity
                    1        ->         clear (1)
                    2        ->         indeterminate (2)
                    3        ->         warning (6)
                    4        ->         minor (5)
                    5        ->         major (4)
                    6        ->         critical (3)

           All other values of alarmModelState MUST NOT appear
           in this table.

           This table MUST be persistent across system reboots."
      INDEX       { alarmListName, alarmModelIndex,
                   ituAlarmPerceivedSeverity }
      ::= { ituAlarmTable 1 }

   ItuAlarmEntry ::= SEQUENCE {
      ituAlarmPerceivedSeverity     ItuPerceivedSeverity,
      ituAlarmEventType             IANAItuEventType,
      ituAlarmProbableCause         IANAItuProbableCause,
      ituAlarmAdditionalText        SnmpAdminString,
      ituAlarmGenericModel          RowPointer }

   ituAlarmPerceivedSeverity OBJECT-TYPE
      SYNTAX  ItuPerceivedSeverity
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
               "ITU perceived severity values."
       REFERENCE
           "ITU Recommendation M.3100, 'Generic Network Information
               Model', 1995
            ITU Recommendation X.733, 'Information Technology - Open
               Systems Interconnection - System Management: Alarm
               Reporting Function', 1992"
       ::= { ituAlarmEntry 1 }

   ituAlarmEventType OBJECT-TYPE
      SYNTAX       IANAItuEventType
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION
               "Represents the event type values for the alarms"
       REFERENCE
           "ITU Recommendation M.3100, 'Generic Network Information
               Model', 1995
            ITU Recommendation X.733, 'Information Technology - Open
               Systems Interconnection - System Management: Alarm

Top      Up      ToC       Page 52 
               Reporting Function', 1992
            ITU Recommendation X.736, 'Information Technology - Open
               Systems Interconnection - System Management: Security
               Alarm Reporting Function', 1992"
       ::= { ituAlarmEntry 2 }

   ituAlarmProbableCause OBJECT-TYPE
      SYNTAX      IANAItuProbableCause
      MAX-ACCESS  read-write
      STATUS       current
      DESCRIPTION
               "ITU probable cause values."
       REFERENCE
           "ITU Recommendation M.3100, 'Generic Network Information
               Model', 1995
            ITU Recommendation X.733, 'Information Technology - Open
               Systems Interconnection - System Management: Alarm
               Reporting Function', 1992
            ITU Recommendation X.736, 'Information Technology - Open
               Systems Interconnection - System Management: Security
               Alarm Reporting Function', 1992"
       ::= { ituAlarmEntry 3 }

   ituAlarmAdditionalText OBJECT-TYPE
      SYNTAX  SnmpAdminString
      MAX-ACCESS read-write
      STATUS     current
      DESCRIPTION
               "Represents the additional text field for the alarm."
       REFERENCE
           "ITU Recommendation M.3100, 'Generic Network Information
               Model', 1995
            ITU Recommendation X.733, 'Information Technology - Open
               Systems Interconnection - System Management: Alarm
               Reporting Function', 1992"
       ::= { ituAlarmEntry 4}

   ituAlarmGenericModel OBJECT-TYPE
      SYNTAX     RowPointer
      MAX-ACCESS read-write
      STATUS     current
      DESCRIPTION
      "This object points to the corresponding
       row in the alarmModelTable for this alarm severity.

       This corresponding entry to alarmModelTable could also
       be derived by performing the reverse of the mapping
       from alarmModelState to ituAlarmPerceivedSeverity defined

Top      Up      ToC       Page 53 
       in the description of ituAlarmEntry to determine the
       appropriate { alarmListName, alarmModelIndex, alarmModelState }
       for this { alarmListName, alarmModelIndex,
       ituAlarmPerceivedSeverity }."
      ::= { ituAlarmEntry 5 }

   -- ITU Active Alarm Table --

   ituAlarmActiveTable OBJECT-TYPE
      SYNTAX      SEQUENCE OF ItuAlarmActiveEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "A table of ITU information for active alarms entries."
      ::= { ituAlarmActive 1 }

   ituAlarmActiveEntry OBJECT-TYPE
      SYNTAX      ItuAlarmActiveEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "Entries appear in this table when alarms are active.  They
          are removed when the alarm is no longer occurring."
      INDEX       { alarmListName, alarmActiveDateAndTime,
                   alarmActiveIndex }
      ::= { ituAlarmActiveTable 1 }

   ItuAlarmActiveEntry ::= SEQUENCE {
       ituAlarmActiveTrendIndication       ItuTrendIndication,
       ituAlarmActiveDetector              AutonomousType,
       ituAlarmActiveServiceProvider       AutonomousType,
       ituAlarmActiveServiceUser           AutonomousType
       }

   ituAlarmActiveTrendIndication OBJECT-TYPE
      SYNTAX      ItuTrendIndication
      MAX-ACCESS  read-only
      STATUS       current
      DESCRIPTION
               "Represents the trend indication values for the alarms."
       REFERENCE
           "ITU Recommendation M.3100, 'Generic Network Information
               Model', 1995
            ITU Recommendation X.733, 'Information Technology - Open
               Systems Interconnection - System Management: Alarm
               Reporting Function', 1992"
       ::= { ituAlarmActiveEntry 1 }

Top      Up      ToC       Page 54 
   ituAlarmActiveDetector OBJECT-TYPE
      SYNTAX AutonomousType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
         "Represents the SecurityAlarmDetector object."
       REFERENCE
           "ITU Recommendation X.736, 'Information Technology - Open
               Systems Interconnection - System Management: Security
               Alarm Reporting Function', 1992"
      ::= { ituAlarmActiveEntry 2 }

   ituAlarmActiveServiceProvider OBJECT-TYPE
      SYNTAX AutonomousType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
         "Represents the ServiceProvider object."
       REFERENCE
           "ITU Recommendation X.736, 'Information Technology - Open
               Systems Interconnection - System Management: Security
               Alarm Reporting Function', 1992"
      ::= { ituAlarmActiveEntry 3 }

   ituAlarmActiveServiceUser OBJECT-TYPE
      SYNTAX AutonomousType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
         "Represents the ServiceUser object."
       REFERENCE
           "ITU Recommendation X.736, 'Information Technology - Open
               Systems Interconnection - System Management: Security
               Alarm Reporting Function', 1992"
      ::= { ituAlarmActiveEntry 4 }

   -- Statistics and Counters

   ituAlarmActiveStatsTable  OBJECT-TYPE
         SYNTAX  SEQUENCE OF ItuAlarmActiveStatsEntry
         MAX-ACCESS  not-accessible
         STATUS  current
         DESCRIPTION
            "This table represents the ITU alarm statistics
            information."
     ::= { ituAlarmActive 2 }

Top      Up      ToC       Page 55 
   ituAlarmActiveStatsEntry OBJECT-TYPE
         SYNTAX  ItuAlarmActiveStatsEntry
         MAX-ACCESS  not-accessible
         STATUS  current
         DESCRIPTION
            "Statistics on the current active ITU alarms."
         INDEX   { alarmListName }

     ::= {  ituAlarmActiveStatsTable 1 }

   ItuAlarmActiveStatsEntry ::=
    SEQUENCE {
      ituAlarmActiveStatsIndeterminateCurrent Gauge32,
      ituAlarmActiveStatsCriticalCurrent      Gauge32,
      ituAlarmActiveStatsMajorCurrent         Gauge32,
      ituAlarmActiveStatsMinorCurrent         Gauge32,
      ituAlarmActiveStatsWarningCurrent       Gauge32,
      ituAlarmActiveStatsIndeterminates       ZeroBasedCounter32,
      ituAlarmActiveStatsCriticals            ZeroBasedCounter32,
      ituAlarmActiveStatsMajors               ZeroBasedCounter32,
      ituAlarmActiveStatsMinors               ZeroBasedCounter32,
      ituAlarmActiveStatsWarnings             ZeroBasedCounter32
    }

   ituAlarmActiveStatsIndeterminateCurrent OBJECT-TYPE
      SYNTAX      Gauge32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the current number of active alarms with a
           ituAlarmPerceivedSeverity of indeterminate."
      ::= { ituAlarmActiveStatsEntry 1 }

   ituAlarmActiveStatsCriticalCurrent OBJECT-TYPE
      SYNTAX      Gauge32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the current number of active alarms with a
           ituAlarmPerceivedSeverity of critical."
      ::= { ituAlarmActiveStatsEntry 2 }

   ituAlarmActiveStatsMajorCurrent OBJECT-TYPE
      SYNTAX      Gauge32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the current number of active alarms with a

Top      Up      ToC       Page 56 
           ituAlarmPerceivedSeverity of major."
      ::= { ituAlarmActiveStatsEntry 3 }

   ituAlarmActiveStatsMinorCurrent OBJECT-TYPE
      SYNTAX      Gauge32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the current number of active alarms with a
           ituAlarmPerceivedSeverity of minor."
      ::= { ituAlarmActiveStatsEntry 4 }

   ituAlarmActiveStatsWarningCurrent OBJECT-TYPE
      SYNTAX      Gauge32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the current number of active alarms with a
           ituAlarmPerceivedSeverity of warning."
      ::= { ituAlarmActiveStatsEntry 5 }

   ituAlarmActiveStatsIndeterminates OBJECT-TYPE
      SYNTAX      ZeroBasedCounter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the total number of active alarms with a
           ituAlarmPerceivedSeverity of indeterminate since system
           restart."
      ::= { ituAlarmActiveStatsEntry 6 }

   ituAlarmActiveStatsCriticals OBJECT-TYPE
      SYNTAX      ZeroBasedCounter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the total number of active alarms with a
           ituAlarmPerceivedSeverity of critical since system restart."
      ::= { ituAlarmActiveStatsEntry 7 }

   ituAlarmActiveStatsMajors OBJECT-TYPE
      SYNTAX      ZeroBasedCounter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the total number of active alarms with a
           ituAlarmPerceivedSeverity of major since system restart."
      ::= { ituAlarmActiveStatsEntry 8 }

Top      Up      ToC       Page 57 
   ituAlarmActiveStatsMinors OBJECT-TYPE
      SYNTAX      ZeroBasedCounter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the total number of active alarms with a
           ituAlarmPerceivedSeverity of minor since system restart."
      ::= { ituAlarmActiveStatsEntry 9 }

   ituAlarmActiveStatsWarnings OBJECT-TYPE
      SYNTAX      ZeroBasedCounter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A count of the total number of active alarms with a
           ituAlarmPerceivedSeverity of warning since system restart."
      ::= { ituAlarmActiveStatsEntry 10 }

   -- Conformance

   ituAlarmConformance OBJECT IDENTIFIER ::= { ituAlarmMIB 2 }
   ituAlarmCompliances  OBJECT IDENTIFIER ::= { ituAlarmConformance 1 }

   ituAlarmCompliance MODULE-COMPLIANCE
      STATUS  current
      DESCRIPTION
             "The compliance statement for systems supporting
             the ITU Alarm MIB."
      MODULE -- this module
          MANDATORY-GROUPS {
              ituAlarmGroup
              }
      GROUP       ituAlarmServiceUserGroup
          DESCRIPTION
              "This group is optional."
      GROUP       ituAlarmSecurityGroup
          DESCRIPTION
              "This group is optional."
      GROUP       ituAlarmStatisticsGroup
          DESCRIPTION
              "This group is optional."
     ::= { ituAlarmCompliances 1 }

   ituAlarmGroups OBJECT IDENTIFIER ::= { ituAlarmConformance 2 }

   ituAlarmGroup OBJECT-GROUP
    OBJECTS {
              ituAlarmEventType,

Top      Up      ToC       Page 58 
              ituAlarmProbableCause,
              ituAlarmGenericModel
            }
    STATUS   current
    DESCRIPTION
                  "ITU alarm details list group."
    ::= { ituAlarmGroups 1}

   ituAlarmServiceUserGroup OBJECT-GROUP
    OBJECTS {
              ituAlarmAdditionalText,
              ituAlarmActiveTrendIndication
            }
    STATUS current
    DESCRIPTION
            "The use of these parameters is a service-user option."
    ::= { ituAlarmGroups 2 }

   ituAlarmSecurityGroup OBJECT-GROUP
     OBJECTS {
             ituAlarmActiveDetector,
             ituAlarmActiveServiceProvider,
             ituAlarmActiveServiceUser
            }
     STATUS current
     DESCRIPTION
            "Security Alarm Reporting Function"
       REFERENCE
           "ITU Recommendation X.736, 'Information Technology - Open
               Systems Interconnection - System Management: Security
               Alarm Reporting Function', 1992"
     ::= { ituAlarmGroups 3 }

   ituAlarmStatisticsGroup OBJECT-GROUP
     OBJECTS {
            ituAlarmActiveStatsIndeterminateCurrent,
            ituAlarmActiveStatsCriticalCurrent,
            ituAlarmActiveStatsMajorCurrent,
            ituAlarmActiveStatsMinorCurrent,
            ituAlarmActiveStatsWarningCurrent,
            ituAlarmActiveStatsIndeterminates,
            ituAlarmActiveStatsCriticals,
            ituAlarmActiveStatsMajors,
            ituAlarmActiveStatsMinors,
            ituAlarmActiveStatsWarnings
             }
     STATUS current
     DESCRIPTION

Top      Up      ToC       Page 59 
       "ITU Active Alarm Statistics."
     ::= { ituAlarmGroups 4 }

   END



(page 59 continued on part 4)

Next RFC Part