Network Working Group P. Faltstrom Request for Comments: 1741 Royal Institute of Technology Category: Informational D. Crocker Brandenburg Consulting E. Fair Apple Computer Inc. December 1994 MIME Content Type for BinHex Encoded Files Status of this Memo This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract This memo describes the format to use when sending BinHex4.0 files via MIME [BORE93]. The format is compatible with existing mechanisms for distributing Macintosh files. Only when available software and/or user practice dictates, should this method be employed. It is recommended to use application/applefile [FALT94] for maximum interoperability. 1. Introduction Files on the Macintosh consists of two parts, called forks: DATA FORK: The actual data included in the file. The Data fork is typically the only meaningful part of a Macintosh file on a non-Macintosh computer system. For example, if a Macintosh user wants to send a file of data to a user on an IBM-PC, she would only send the Data fork. RESOURCE FORK: Contains a collection of arbitrary attribute/value pairs, including program segments, icon bitmaps, and parametric values. Additional information regarding Macintosh files is stored by the Finder has in a hidden file, called the "Desktop Database". Because of the complications in storing different parts of a Macintosh file in a non-Macintosh filesystem that only handles consecutive data in one part, it is common to convert the Macintosh file into some other format before transferring it over the network.
AppleDouble file format [APPL90], encoded in MIME as multipart/appledouble [FALT94] and application/applefile [FALT94] is the preferred format for a Macintosh file that is to be included in an Internet mail message, because it provides recipients with Macintosh computers the entire document, including Icons and other Macintosh specific information, while other users easily can extract the Data fork (the actual data). However, this specification provides for use of the currently popular BinHex4.0 encoding schemes, as a convinience to the installed base of users. 2. MIME format for BinHex4.0 MIME-base Apple information is specified by: MIME type-name: APPLICATION MIME subtype name: MAC-BINHEX40 Required parameters: none Optional parameters: NAME, which must be a "value" as defined in RFC-1521 [BORE93]. Encoding considerations: none Security considerations: See separate section in the document Published specification: Appendix A Rationale: Permits MIME-based transmission of data with Apple Macintosh file system specific information using a currently popular, though platform specific, format. 2a. Detail specific to MIME-based usage Macintosh documents do not always need to be sent in a special format. Those documents with well-known MIME types and non- existent or trivial resource forks can be sent as regular MIME body parts, without use of AppleSingle, AppleDouble or BinHex4.0. Documents which lack a data fork must be sent as AppleSingle according to RFC 1740 [FALT94]. Unless there are strong reasons not to, all other documents should be sent as AppleDouble according to RFC 1740 [FALT94]. This includes documents with non-trivial resource forks, and documents without corresponding well-known MIME types. It may be valuable in some cases to allow the user to choose one format over another, either because he disagrees with the implementor's definition of "trivial" resource forks, or for reasons of his own.
Only when available software and/or user practice dictates, should BinHex 4.0 be employed. 3. BinHex BinHex 4.0 is a propular means of encoding Macintosh files for archiving on non-Macintosh file systems and for transmission via Internet mail. (See Appendix A for a brief description of the BinHex 4.0 format.) The content-type application/mac-binhex40 indicates that the body of the mail is a BinHex4.0 file. Even though the BinHex encoding consists of characters which are not the same as those used in Base64 (those regarded as safe according to RFC-1521 [BORE93]) a transportation encoding should not be done. Even though a BinHex file includes the original Macintosh filename, it is recommended that a name parameter be included on the Content- Type header to give the recipient a hint as to what file is attached. The value of the name parameter must be a "value" as defined by RFC- 1521 [BORE93]. Note that this restricts the value to seven-bit US- ASCII characters. 3a. BinHex example Content-Type: application/mac-binhex40; name="car.hqx" [The BinHex4.0 file goes here] 4. References APPL90 AppleSingle/AppleDouble Formats for Foreign Files Developer's Note, Apple Computer, Inc., 1990. FALT94 Faltstrom P., Crocker, D., and E. Fair, "MIME Encapsulation of Macintosh Files - MacMIME", RFC 1740, KTH, Brandenburg Consulting, Apple Computer Inc., December 1994. BORE93 Borenstein N., and N. Freed, "MIME (Multipurpose Internet Mail Extensions): Mechanisms for Specifying and Describing the Format of Internet Message Bodies", RFC 1521, Bellcore, Innosoft, September 1993.
5. Security Considerations To the extent that application/mac-binhex40 facilitates the transmission of operating-system sensitive data, it may open a door for easier relaxation of security rules than is intended either by the sender of the administrator of the sender's system. 6. Acknowledgements Thanks to all of the people on the ietf-822 list who have provided much meaningful input for this document. Some of them must though be remembered by name, because they have almost crushed my mailbox the last weeks with a very nice and interesting debate: Johan Berglund, Steve Dorner, David Gelhar, David Herron, Raymond Lau, Jamey Maze, John B. Melby, Jan Michael Rynning, Rens Troost, and Peter Svanberg. 7. Authors' Addresses Patrik Faltstrom Department of Numerical Analysis and Computing Science Royal Institute of Technology S-100 44 Stockholm Sweden EMail: firstname.lastname@example.org Dave Crocker Brandenburg Consulting 675 Spruce Dr. Sunnyvale, CA 94086 EMail: email@example.com Erik E. Fair Engineering Computer Operations Apple Computer Inc. EMail: firstname.lastname@example.org
Appendix A. The BinHex format Here is a description of the Hqx7 (7 bit format as implemented in BinHex 4.0) formats for Macintosh Application and File transfers. The main features of the format are: 1) Error checking even using ASCII download 2) Compression of repetitive characters 3) 7 bit encoding for ASCII download The format is processed at three different levels: 1) 8 bit encoding of the file: Byte: Length of FileName (1->63) Bytes: FileName ("Length" bytes) Byte: Version Long: Type Long: Creator Word: Flags (And $F800) Long: Length of Data Fork Long: Length of Resource Fork Word: CRC Bytes: Data Fork ("Data Length" bytes) Word: CRC Bytes: Resource Fork ("Rsrc Length" bytes) Word: CRC 2) Compression of repetitive characters. ($90 is the marker, encoding is made for 3->255 characters) 00 11 22 33 44 55 66 77 -> 00 11 22 33 44 55 66 77 11 22 22 22 22 22 22 33 -> 11 22 90 06 33 11 22 90 33 44 -> 11 22 90 00 33 44 The whole file is considered as a stream of bits. This stream will be divided in blocks of 6 bits and then converted to one of 64 characters contained in a table. The characters in this table have been chosen for maximum noise protection. The format will start with a ":" (first character on a line) and end with a ":". There will be a maximum of 64 characters on a line. It must be preceded, by this comment, starting in column 1 (it does not start in column 1 in this document):
(This file must be converted with BinHex 4.0) Any text before this comment is to be ignored. The characters used is: !"#$%&'()*+,- 012345689@ABCDEFGHIJKLMNPQRSTUVXYZ[`abcdefhijklmpqr