tech-invite   World Map     

IETF     RFCs     Groups     SIP     ABNFs    |    3GPP     Specs     Glossaries     Architecture     IMS     UICC    |    search     info

3GPP Glossaries

|   Features_Services   |   Network_Entities   |   Reference_Points   |   SIM_UICC_Dir_Files   |   Identifiers   |

 

Interfaces / Reference Points

Y

 

 

 

Here          Top

|   Za   |   Zb   |   Zh   |   Zh'   |   Zn   |   Zpn   |

 


between  SEG  and  SEG

specified from  Rel-5
Source:   TS 33.210 

Interface between Security Gateways (SEGs) belonging to different networks/security domains.

Up       Top


between  SEG / NE  and  NE

specified from  Rel-5
Source:   TS 33.210 

Interface between Security Gateways (SEGs) and Network Elements (NEs) and interface between Network Elements (NEs) within the same network/security domain.

Up       Top


between  BSF  and  HSS

specified from  Rel-6
in  TS 33.220  and  TS 29.109 

This reference point allows the BSF to fetch the required authentication information and all GBA user security settings from the HSS.

Commands:
  • DAR/DAA:  Multimedia-Auth-Request/Answer
See also  RFC 6733  for Diameter Base Protocol, and  TS 29.230  for 3GPP-specific Diameter codes and identifiers.

Up       Top


between  BSF  and  HLR

specified from  Rel-6
Source:   TS 33.220, clause 4.3.6 

The reference point Zh' used between the BSF and the HLR allows the BSF to fetch the required authentication information. The reference point Zh' is an intra-operator domain interface.

Up       Top


between  BSF  and  NAF

specified from  Rel-6
in  TS 33.220  and  TS 29.109 

This reference point is used by the NAF to fetch the key material agreed during a previous HTTP Digest AKA protocol run over the reference point Ub from the UE to the BSF. It is also used to fetch application-specific user security settings from the BSF, if requested by the NAF.

Commands:
  • BIR/BIA:  Boostrapping-Info-Request/Answer
See also  RFC 6733  for Diameter Base Protocol, and  TS 29.230  for 3GPP-specific Diameter codes and identifiers.

Up       Top


between  BSF  and  NAF

specified from  Rel-8
in  TS 33.223  and  TS 29.109 

The Zpn reference point is introduced with the GBA Push functionality. It is based on the Zn reference point protocols. The NAF receives the GBA-Push-Info intended for the UE from the BSF over the Zpn reference point and forwards it over Upa.

Commands:
  • GPR/GPI:  GBAPush-Info-Request/Answer
See also  RFC 6733  for Diameter Base Protocol, and  TS 29.230  for 3GPP-specific Diameter codes and identifiers.

Up       Top