tech-invite   World Map     

IETF     RFCs     Groups     SIP     ABNFs    |    3GPP     Specs     Glossaries     Architecture     IMS     UICC    |    search     info

Top          in Index          Prev          None

TS 103 484-2 (ETSI SCP)
Smart Cards –
Test specification for the Secure Channel interface –
Part 2: UICC features

|   ToC   |   ETSI-search   |

Smart Cards –
(P) V9.0.0    2013-05    110 p.


The present document covers the minimum characteristics which are considered necessary for the UICC or UICC and UICC application in order to provide compliance to TS 102 484.

The present document specifies the test cases for the Secured APDU - Application to Application type of secure channel and includes tests for:
  • the characteristics of the Secure Channel interface between the UICC and the UICC-enabled terminal;
  • the Discovery and Channel Administration;
  • Key Agreement for Strong Pre-shared Keys - Proprietary Pre-Shared Keys;
  • the Channel Operation between the UICC-enabled terminal and the UICC.
Both tests for Terminal capability and Terminal applications are specified.

The following are out of scope of this document:
  • TLS- Application to Application.
  • IPsec - USB Class to USB Class.
  • Secured APDU - Platform to Platform.
  • Strong Pre-shared Keys - GBA key agreement.
  • Weak Pre-shared Keys - Proprietary Pre-Shared Keys key agreement.
  • Certificate Exchange key agreement.


1   Scope   p. 10
2   References
3   Definitions, symbols and abbreviations
4   Test environment
4.1   Table of optional features
4.2   Applicability table   p. 14
4.3   Information provided by the device supplier   p. 17
4.4   Test equipment
4.4.1   Measurement / setting uncertainties
4.4.2   Default conditions for DUT operation
4.4.3   Terminal Simulator Requirements
4.4.4   MANAGE SECURE CHANNEL commands
4.4.5   TRANSACT DATA commands   p. 24
4.5   Test execution   p. 32      Up
4.6   Pass criterion
5   Conformance Requirements
6   Test cases
6.1   Test group 1: Discovery      Up
6.2   Test group 2: Channel Administration   p. 41
6.2.1   Sub Test group 2.1 Manage Secure Channel - Retrieve UICC Endpoints
6.2.2   Sub Test group 2.2 Manage Secure Channel - Establish SA - Master SA   p. 45      Up
6.2.3   Sub Test group 2.3 Manage Secure Channel - Establish SA - Connection SA
6.2.3.1   Test case 1: Establish SA - Connection SA (positive case)
6.2.3.2   Test case 2a: Connection SA Lifetime - Remove UICC Power before Starting SC (negative case)   p. 50
6.2.3.2   Test case 2b: Connection SA Lifetime - Remove UICC Power after Starting SC (negative case)      Up
6.2.3.3   Test case 3a: Connection SA Lifetime - Reset the UICC before Starting SC (negative case)
6.2.3.3   Test case 3b: Connection SA Lifetime - Reset the UICC after Starting SC (negative case)
6.2.3.4   Test case 4a: Connection SA Lifetime - Termination of the Connection SA before Starting SC (negative case)      Up
6.2.3.4   Test case 4b: Connection SA Lifetime - Termination of the Connection SA after Starting SC (negative case)
6.2.3.5   Test case 5a: Connection SA Lifetime - Termination of the Parent Master SA before Starting SC (negative case)
6.2.3.5   Test case 5b: Connection SA Lifetime - Termination of the Parent Master SA after Starting SC (negative case)   p. 55      Up
6.2.3.6   Test case 6: Setup 4 Connection SAs
6.2.4   Sub Test group 2.4 Manage Secure Channel - Establish SA - Start Secure Channel   p. 57
6.2.5   Sub Test group 2.5 Manage Secure Channel - Terminate Secure Channel SA   p. 61      Up
6.2.5.1   Test case 1: Terminate Master SA (positive case)
6.2.5.2   Test case 2: Terminate one Connection SA (positive case)
6.2.5.3   Test case 3: Terminate two Connection SA (positive case)
6.2.5.4   Test case 4: Restart terminated channel (terminated Master SA)      Up
6.2.5.5   Test case 5: Suspend and resume secure channel (terminated Connection SA)   p. 65
6.2.5.6   Test case 6: Suspend and resume secure channel (two terminated Connection SA)   p. 67
6.2.5.7   Test case 7: Terminate Secure Channel (Negative Case with Wrong MAC and MSA_ID)   p. 69      Up
6.2.5.8   Test case 8: Terminate Secure Channel (Negative Case with Wrong MAC and CSA_ID)
6.2.5.9   Test case 8: Terminate Non-Existing Master SA (positive case)
6.2.5.10   Test case 10: Terminate Non-Existing Connection SA (positive case)   p. 71      Up
6.3   Test group 3: Key Agreement
6.4   Test group 4: Channel Operation
6.4.1   Sub Test group 4.1 Securing Case 3 commands      Up
6.4.2   Sub Test group 4.2 Retransmission   p. 84
6.4.3   Sub Test group 4.3 Interleaving   p. 89      Up
6.4.4   Sub Test group 4.4 Interaction with Manage Secure Channel   p. 92
A   Test coverage   p. 99
B   Core specification version information   p. 109

Top