tech-invite   World Map
3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search     Home
Top        in Index        Prev        Next

TS 102 922-2 (ETSI SCP)
Smart Cards –
Test specification for the ETSI aspects of the IC USB interface –
Part 2:  UICC features

|   ToC   |   ETSI-search   |

(P) V7.0.0    2011-03    57 p.


The present document defines test cases for the UICC relating to the USB interface, as specified in TS 102 600. It specifies the test cases for:
  • the characteristics of the Inter-Chip USB electrical interface between the USB UICC and the USB UICC-enabled terminal;
  • the initial communication establishment and the transport protocols;
  • the communication layers between the USB UICC and the USB UICC-enabled terminal.
Test cases for the USB UICC-enabled terminal relating to TS 102 221 interface are out of scope of the present document.


 

Here        Top

 

1 Scope    2 References    2.1 Normative references    2.2 Informative references    3 Definitions, symbols and abbreviations    3.1 Definitions    3.2 Symbols    3.3 Abbreviations    3.4 Formats    4 Test environment    4.1 Table of optional features    4.2 Applicability table    4.3 Information provided by the device supplier    4.4 Test equipment    4.5 Test execution    4.6 Pass criterion    5 Conformance Requirements    5.1 USB UICC system architecture    5.2 Physical characteristics    5.3 Electrical characteristics    5.4 Initial communication establishment procedures    5.5 USB interface operational features    5.6 Protocol stacks for USB UICC applications    5.7 USB Descriptors of a USB UICC    5.8 Assigned values for vendor specifIC_USB requests    6 Test cases    6.1 Void    6.2 Physical Tests    6.3 Basic Electrical Tests    6.4 Activation Tests    6.5 Initialisation Tests    6.6 Descriptors    6.7 Protocol Stack and Higher Level    A List of test cases for each conformance requirement    B Additional optional test cases for USB ICCD    B.1 USB ICCD Control B    B.2 USB ICCD Bulk    C Additional optional requirements and test cases for Electrical characteristics    C.1 Conformance Requirements from Inter-Chip USB and USB 2.0    C.2 Additional Electrical test cases    D Bibliography    Z Change history   

 

1   Scope   PDF-p. 9
2   References
3   Definitions, symbols and abbreviations
4   Test environment
5   Conformance Requirements   PDF-p. 15
6   Test cases
6.1   Void
6.2   Physical Tests
6.3   Basic Electrical Tests
6.4   Activation Tests   PDF-p. 22
6.5   Initialisation Tests
6.6   Descriptors
6.7   Protocol Stack and Higher Level   PDF-p. 31
6.7.1   ICCD - APDU based UICC Applications
6.7.2   USB ICCD Control B
6.7.3   USB ICCD Bulk
6.7.4   EEM - Ethernet Emulation Model   PDF-p. 33
6.7.5   Mass-Storage
A   List of test cases for each conformance requirement   PDF-p. 37
B   Additional optional test cases for USB ICCD   PDF-p. 39
C   Additional optional requirements and test cases for Electrical characteristics   PDF-p. 45
C.1   Conformance Requirements from Inter-Chip USB and USB 2.0
C.2   Additional Electrical test cases
D   Bibliography   PDF-p. 55
Z   Change history   PDF-p. 56

Up        Top